How
much heat must be added to
85g
of water
to raise its temperature 225?

Answer:

7. Concave and convex mirrors are called spherical mirrors because they are both made from the sphere. The difference between the two (in the simplest terms) is that diminished images form in convex mirrors while enlarged images form in concave mirrors.

8. The word ambulance is written inverted on an ambulance is because when a driver is driving and sees an ambulance in their rearview mirror, they can see the word ambulance the correct way. Otherwise the word ambulance would be backwards in the mirror. Thats why they write it backwards.

9. A plane mirror forms the image, object, etc, the same exact size that it is. The mirror can be small or large the size of the image will stay the same. So the difference between the object in a small and large plane mirror is none, there is no difference.

10. Car rearview mirrors are curved. This is to give a wider viewing angle. Flat surface mirrors give an accurate reflection. since the rearview mirrors are not flat, they are curved, they are less accurate, so thats why they have a warning label.

11. The sun emits the color of white. And as we know the color white consists of all colors. We can test this by putting the sunlight through a prism. since different colors of light travels at different speeds in the glass we cand see the light 'bent' .

12. Solar cookers use concave mirrors. This is because the mirror reflects the sunlight to a focal, 'center,' point. This center point will eventually heat up very, very hot.

If you have any questions feel free to ask - mark

Answer:

c (clay)

Explanation:

Answer:

False

Explanation:

Answer:

true! :) hope it helps

Answer: 10 minutes

Explanation:

ln(No/N) = kt

No = 80 mg

N = 10 mg

t = 30 min

solve for k, then

k = 0.693/t1/2

Substitute k from above and solve for t1/2

10 min is correct.

Answer:

Ethane Combustion Reaction or just  Combustion Reaction

Explanation:

56.8g of aluminum chloride will be produced if the reaction begins with 135.0 g Al and 75.0 g chlorine gas.

A body's mass is an inherent quality. Prior to the discovery of a atom or particle physics, it was widely considered to be tied to the amount of matter inside a physical body. It was discovered that, despite having the very same quantity of matter in theory, different atoms and elementary particles have varied masses.

There are various conceptions of mass in contemporary physics that are theoretically different but physically equivalent. The resistance of the body to acceleration in the presence of a net force can be measured experimentally as mass. The gravitational pull an object has on other bodies is also influenced by its mass.

2 Al + 3 Cl[tex]_2[/tex] → 2 Al C l[tex]_3[/tex]

mole of Al =  135.0/ 26=5.19mol

mole of Cl[tex]_2[/tex] = 75.0/ 35 =2.14 mol

mass of aluminum chloride =  56.8g

Limiting reagent = Al

excess reactant =  Cl[tex]_2[/tex]

Therefore, 56.8g of aluminum chloride will be produced if the reaction begins with 135.0 g Al and 75.0 g chlorine gas.

To know more about mass, here:

https://brainly.com/question/28704035

#SPJ2

Answer:

use wire nettings

Explanation:

and cages

Answer:

Deposition

Explanation:

It’s breaking down the rock :]

Answer:

deposition

Explanation:

Ap3x

Answer:

a. [tex]r_{N_2O_5}=-0.075M/min[/tex]

b. [tex]r_{N_2O_4}=0.075M/min[/tex]

Explanation:

Hello.

In this case, according to the balanced chemical reaction, we can write the law of rate proportions:

[tex]\frac{r_{N_2O_5}}{-2} =\frac{r_{N_2O_4}}{2} =\frac{r_{O_2}}{1}[/tex]

Thus, we proceed as follows:

a. Since the rate of oxygen production is 0.15 M/min, we can make the following setup:

[tex]\frac{r_{N_2O_5}}{-2} =\frac{r_{O_2}}{1}\\\\r_{N_2O_5}=\frac{r_{O_2}}{-2} =\frac{0.15M/min}{-2}\\\\ r_{N_2O_5}=-0.075M/min[/tex]

b. Since the rate of oxygen production is 0.15 M/min, we can make the following setup:

[tex]\frac{r_{N_2O_4}}{2} =\frac{r_{O_2}}{1}\\\\r_{N_2O_4}=\frac{r_{O_2}}{2} =\frac{0.15M/min}{2}\\\\ r_{N_2O_4}=0.075M/min[/tex]

Best regards!

Answer:

1st one is correct

The atom of the reactants unbound , rearrange, and then rebond to form the product

hope it helps

In a chemical reaction, the atoms of the reactants unbond, rearrange, and then rebond to form the products. Therefore, option A is correct.

Chemical reaction, the transformation of one or more chemicals the reactants into one or more distinct compounds, the products. Chemical elements or chemical compounds make up substances.

Combustion reaction, decomposition reaction, neutralization reaction, redox reaction, precipitation or double-displacement reaction, and synthesis reaction are some of the numerous types of reactions.

In a chemical reaction, bonds between molecules of the reactant are broken and new bonds between molecules of the product are established to create a new substance.

A chemical equation is nothing more than a mathematical statement that represents how reactants form products.

Thus, option A is correct.

To learn more about chemical reaction, follow the link;

https://brainly.com/question/3461108

#SPJ2

Answer:

Explanation:

Under good conditions the seedling can thrive in soil that does not have any clay as long as it gets the proper nutrients and right amount of sunlight/water that it needs. Clay in soil can provide the nutrients necessary for seedlings to thrive but can also cause many negatives. One such con of using clay is that it does not absorbe water very well, this ultimately causes the soil to become waterlogged and drowns the plants as no oxygen can pass through. This would ultimately kill the plants.

Answer:

false

Explanation:

Difference in neutrons in a molecule means that molecules have different masses. They will always have different energies

another example: water has less energy as a liquid than as a gas

I cant send this with no text

Have a nice day

Answer:

A. the average kinetic energy increases

Explanation:

temperature is a measure of the average kinetic energy of the particles in a sample of matter

Answer:

There are 0.0364⋅mol

Explanation:

The largest mass percentage of nitrogen in NO. Therefore, option (A) is correct.

The percentage by mass of an element in a chemical compound can be described as the number of parts by mass of the element contained in 100 parts by mass of a chemical compound.

The mass percentage of an element can be determined in two steps:

First, calculate the molar mass of the compound and then the percentage of each element by dividing the total mass of the element present in the compound by the molecular mass of the compound multiplied by 100.

Given, the molecular formula of the compound is NO.

The molecular mass of the NO = 30 g/mol

The mass percentage of the Nitrogen = (14/30) × 100 = 46.67 %

the molecular formula of the compound is NO₂.

The molecular mass of the NO = 46 g/mol

The mass percentage of the Nitrogen = (14/46) × 100 = 30.4 %

the molecular formula of the compound is N₂O.

The molecular mass of the NO = 44 g/mol

The mass percentage of the Nitrogen = (14/44) × 100 = 31.81 %

the molecular formula of the compound is N₂O₃.

The molecular mass of the NO = 76 g/mol

The mass percentage of the Nitrogen = (28/76) × 100 = 36.84 %

Learn more about  the mass percentage, here:

brainly.com/question/16750428

#SPJ2

Answer:

anything that has weight and occupies space

Explanation:

Matter is anything, such as a solid, liquid or gas, that has weight (mass) and occupies space.  

For anything to occupy space, it must-have volume.

Answer:

Answer the first ine made up of 2 or more.....

All mixtures are made up of two or more elements or compounds.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ2

hmm, i not sure i come back later with the answer.

Answer: If we work it out with direct proportions, the vapor pressure of propanone is 56 degrees Celsius. The atmospheric pressure is about 101.

Explanation: hope this helps.

The vapor pressure of propanone at 50°C is :

- 78° vapor pressure

When the vapor pressure is specifically work through the extents to a temperature rate it response is intensely subordinate on their possess a mass nature.

The vapor weight of propanone is calculated and shape in degree Celsius in rate.

The rate of vapor when it is calculated by 50°C with propanone its at long last gives us a 78° vapor pressure.

Learn more about "Propanone":

https://brainly.com/question/491528?referrer=searchResults

Answer:(D) different number of neutrons per atom

Explanation: Honestly, I just looked it up on Socratic.

Answer:

²⁴³₉₅Am --> ²³⁹₉₃Np  +  ⁴₂He

Explanation:

In alpha decay;

The mass number decreases by 4

Atomic Number decreases by 2

Mass Number = 243 - 4 = 239

Atomic Number = 95 - 2 =93

Element = Neptunium (Np)

Equation for the decay is given as;

²⁴³₉₅Am --> ²³⁹₉₃Np  +  ⁴₂He

Answer:

A.

Explanation:

░░░░░▐▀█▀▌░░░░▀█▄░░░

░░░░░▐█▄█▌░░░░░░▀█▄░░

░░░░░░▀▄▀░░░▄▄▄▄▄▀▀░░

░░░░▄▄▄██▀▀▀▀░░░░░░░

░░░█▀▄▄▄█░▀▀░░

░░░▌░▄▄▄▐▌▀▀▀░░ This is Bob

▄░▐░░░▄▄░█░▀▀ ░░

▀█▌░░░▄░▀█▀░▀ ░░ Copy And Paste Him onto all of ur brainly answers

░░░░░░░▄▄▐▌▄▄░░░ So, He Can Take

░░░░░░░▀███▀█░▄░░ Over brainly

░░░░░░▐▌▀▄▀▄▀▐▄░░

░░░░░░▐▀░░░░░░▐▌░░

░░░░░░█░░░░░░░░█░

Answer:chemical markers

Explanation:

I’m smart give brainlest plz