Answer:
The answer to your question is given below
Explanation:
We'll begin by converting 500 cm³ to L. This can be obtained as follow:
1000 cm³ = 1 L
Therefore,
500 cm³ = 500 cm³× 1 L / 1000 cm³
500 cm³ = 0.5 L
Next, we shall determine the number of mole of Na₂CO₃ in the solution. This can be obtained as follow:
Volume = 0.5 L
Molarity = 2 M
Mole of Na₂CO₃ =?
Molarity = mole /Volume
2 = Mole of Na₂CO₃ / 0.5
Cross multiply
Mole of Na₂CO₃ = 2 × 0.5
Mole of Na₂CO₃ = 1 mole
Finally, we shall determine the mass of 1 mole of Na₂CO₃. This can be obtained as follow:
Mole of Na₂CO₃ = 1 mole
Molar mass of Na₂CO₃ = (23×2) + 12 + (16×3)
= 46 + 12 + 48
= 106 g/mol
Mass of Na₂CO₃ =?
Mass = mole × molar mass
Mass of Na₂CO₃ = 1 × 106
Mass of Na₂CO₃ = 106 g
Thus, to prepare the solution, weigh 106 g of Na₂CO₃ and dissolve in 500 cm³ (i.e 0.5 L) of water.
Ecosystems are self-sustaining. They naturally recycle resources without human intervention. Do you think this is true for a pop- bottle biome?
Answer:
yes. For a pop bottle biome to be self sustaining it needs a water cycle, mineral cycle, solar energy flow, and a balance.
Explanation:
hope this helps
Answer:
I would say no because you have to add water and other recourses for it to grow and work
Explanation:
What part of the food. chain is a pine?
a:primary consumer
b:secondary consumer
c:herbivore
d:producer
Answer:
producer
Explanation:
Hard water contains relatively large concentrations of
A. Magnesium ions
B. Calcium ions
C. Iron ions
D. All of these ions
Answer:
I think the answer is All of these ions
Which affects both deep water and surface currents in the ocean? the wind the temperature of the water the Coriolis effect None of the above
Answer:
the wind and the temperature of water both drive ocean currents
Answer:
B. Write 'T' for true or 'F' for false statements :
1. Publisher works only with document in fixed shapes and sizes.
2. Viewing tools are only for editing purpose.
3. Text box icon is found in Styles group.
4. Publisher does not allow you to add images to your document.
5. Margin guides are blue lines that mark the edges.
why does a mole of silicon weigh a different amount than a mole of carbon?
Answer:
[tex]\boxed {\boxed {\sf Different \ amount \ of \ protons, neutrons, \ and \ electrons}}[/tex]
Explanation:
Remember that a mole is equal to Avogadro's number: 6.022*10²³ atoms. Also, remember that an atom is made up of protons, neutrons, and electrons. Each element has a different amount of each.
If an element has more of these particles in 1 atom, then the atomic mass will be greater, ultimately making the molar mass (mass of 1 mole) greater.
Silicon has 14 protons, electrons, and neutrons, making its atomic mass 28.085 amu and its molar mass 28.085 grams. However, carbon only has 6 of each particle, so its atomic mass is smaller at 12.011 amu and molar mass is 12.011 grams.
How many grams of NaOH (MW = 40.0) are there in 500.0 mL
of a 0.175 M NaOH solution?
A) 3.50
B) 114
C) 14.0
D) 2.19x10
Answer:
3.5
Explanation:
500*0.175= 8.75 *40/1000=3500/1000=3.5
Answer:
3.50 grams
Explanation:
Mastering chem
how many moles are in 83 particles of sodium chloride?
Answer:
there are 1.4201927800478769 moles in 83 particles of sodium chloride. or 1.42 for short.
Explanation:
Help me I’m struggling with this one
Answer:
Eukarya
Explanation:
It's larger than a prokaryotic cell and it has a nucleus.
Part A
Choose the paramagnetic species from below.
O He
O Te
O T14+
O All of the above are paramagnetic.
None of the above is paramagnetic.
Answer:
o He
Explanation:
basyshsiz0qnshshhsjzz
What is the pressure (in atm) in a 5.00 L tank with 9.00 grams of oxygen gas at 350 K?
Answer:
1.61 atm
Explanation:
Using general gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
From the information provided in this question,
V = 5.00L
T = 350K
mass of O2 = 9.00g
Using mole = mass/molar mass
Molar mass of O2 = 16(2) = 32g/mol
mole = 9/32
mole = 0.28mol
Using PV = nRT
P = nRT/V
P = 0.28 × 0.0821 × 350/5
P = 8.0458/5
P = 1.609
Pressure = 1.61 atm
The pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
The given parameters;
volume of the gas, V = 5 Lmass of the oxygen gas, m = 9 gtemperature of the gas, T = 350 KThe number of the moles of the given gas is calculated as follows;
[tex]moles = \frac{m}{M} \\\\moles = \frac{9}{32} \\\\moles = 0.28 \ mol[/tex]
The pressure of the gas is calculated as follows;
[tex]PV = nRT\\\\P = \frac{nRT}{V} \\\\P = \frac{0.28 \times 0.0821 \times 350}{5} \\\\P = 1.61 \ atm[/tex]
Thus, the pressure of the oxygen gas at the given temperature and volume is 1.61 atm.
Learn more here:https://brainly.com/question/21912477
plz someone help me i dont get this and i need to finish this
Answer:
The height of A is 900
Explanation: Beside A, there is a number which explains what the height is so the answer is A.
Choose the larger atom from each of the following pairs.
a. Between Se and Te, the larger atom is __________
b. Between I and Kr, the larger atom is ________
c. Between P and Pb, the larger atom is _______
d. Between Ge and Br, the larger atom is___________
e. Between G e and B r, the larger atom is _________
1. Se
2. Kr
3. S
4. C
Answer:
C, between P and Pb, largest atom is Pb
The larger atom from each of the following pairs is as,
a. Between Se and Te, the larger atom is Te .
b. Between I and Kr, the larger atom is I .
c. Between P and Pb, the larger atom is Pb .
d. Between Ge and Br, the larger atom is Ge .
e. Between G e and B r, the larger atom is Ge .
How atomic size of elements vary in periodic table?In periodic table, on moving from top to bottom in a group the atomic size of elements increases while on moving left to right in a period the atomic size of elements decreases.
To learn more about periodic table here.
https://brainly.com/question/11155928
#SPJ3
When aqueous ammonia is added to a solution containing Bi3+ and Cu2+ cations, ____________ occurs. A. Reduction to black bismuth metal.B. Precipitation of a black bismuth hydroxide.C. Precipitation of white bismuth hydroxide. D. Formation of a red-brown precipitate of Cu2[Fe(CN)6].
Answer:
C. Precipitation of white bismuth hydroxide.
Explanation:
When aqueous ammonia is added to a solution that has Bi3+ and CU2+ cations, what we would have as a chemical result is the precipitation of white Bismuth hydroxide.
The chemical reaction for this can be written as,
Bi3+ + 2NH3 + 3H2O ⇌ Bi(OH)3(s) + 3NH4
Thank you!
How is this effect of dissolved
substances important in nature?
Explanation:
Water is called the "universal solvent" because it is capable of dissolving more substances than any other liquid. This is important to every living thing on earth. It means that wherever water goes, either through the air, the ground, or through our bodies, it takes along valuable chemicals, minerals, and nutrients.
help me please i beg u
Answer:
none of the above
Explanation:
Please please help me
Answer:
I agree with Omar because it depends on what the charge of the object and magnet is. If the magnet is negative and the object is positive, they will pull together. If the magnet is negative and the object is negative then they will pull apart.
Explanation:
For the reaction shown, drsw the major(s) expected product.
Answer:
2
Explanation:
What evidence can be used to explain the type of mutualistic relationship present between the water buffalo and frog?
What is the percent yield of LiCl if I produced 30.85g LiCl and my theoretical yield was calculated to be 35.40g LiCl?
Answer:
87.15%
Explanation:
To find percent yield, we can use this simple equation
[tex]\frac{Actual}{Theoretical} *100[/tex]
Where "Actual" is the amount in grams actually collected from the reaction, and "Theoretical" is, well, the theoretical amount that should have been produced.
They give us these values, so to find the percent yield, just plug the numbers in.
[tex]\frac{30.85}{35.40} *100\\\\ =87.15[/tex]
So, the percent yield is 87.15%
An easy trick to remember how to do this is just to divide the smaller number by the bigger number and move the decimal back two places. If you have a percent yield greater than 100%, something is wrong in the reaction.
Helpppp me pleaseeee now I’ve been struggling so bad w this
Answer:
I don't know what the passage says, but I feel like the most logical conclusion is D or the last one.
Explanation:
Answer:
D! Hope this helps! Figured id help with all of ur questions!
Explanation:
Im a wiz at science! ;)
water
air
multiple cells
a place to live
Answer:
I guess it WATER
How many moles of Ag can be obtained from 2.77 moles Cu using the following
balanced reaction?
2AgNO3
+ Cu
Cu(NO3)2
+ 2Ag
Answer:
2.77×2= 5.4 mol Ag can be obtained
Photosynthesis in a plant is an example of which characteristic of living things?
1. Reproduction
2. Response to the environment
3. Growth and development
4. Ability to obtain and use energy
Answer:
4. Ability to obtain and use energyPlease Answer Giving Brainleist
What gas in the air is used by plants to make their own food?
A) Nitrogen
B) Water vapor
C) Carbon dioxide
D) Oxygen
Answer:
C) Carbon dioxide is the answer.
Answer:
C. Carbon Dioxide
Carbon is absorbed by plants and chemically converted to oxygen via photosynthsis.
Hope this helps!
the exact position of the electrons of an atom cannot be determined because they are in constant ___
Consider this chemical equation:
2AgNO3(aq) + Cu(s) → Cu(NO3)2(aq) + 2Ag(s)
Which substances dissolve in solution? Select all
that apply.
AgNO3
Cu
Cu(NO3)2
Ag
Answer is:AgNO3 and Cu(NO3)2
Answer:
the answer is very correct as AgNO3 and Cu(NO3)2
Answer:
A,C
Explanation:
the person above me is correct
What is the molarity of ZnCl, that forms when 20.0 g of zinc completely reacts with CuCl2, according to the following reaction? Assume a final
volume of 285 mL
Zn(s) + CuCl2(aq) → ZnCl2(aq) + Cu(s)
why pie bond are not perticipate in hybridaization
How can we find life on other planets?
Through satellites...
Hydrazine (N2H4) and dinitrogen tetroxide (N2O4) form a self-igniting mixture that has been used as a rocket propellant. The reaction products are N2 and H2O. Part A Write a balanced chemical equation for this reaction. Express your answer as a chemical equation. nothing A chemical reaction does not occur for this question. Request Answer Part B What is being oxidized, and what is being reduced
Answer:
2N₂H₄+N₂O₄→3N₂+4H₂O; N₂H₄ gets oxidized, N₂O₄ gets reduced.
Explanation:
Part AThey tell us what substances react to form what products, so we can write an unbalanced chemical equation from those substances.
N₂H₄+N₂O₄→N₂+H₂O
To balance this equation, we need to make it so there is an even amount of each element on both sides of the reaction. We can do this by multiplying the amount of each substance by adding a coefficient in front of it.
2N₂H₄+N₂O₄→3N₂+4H₂O
Part BTo identify what is being oxidized and what is being reduced, look at the oxidation charges of each element.
N₂H₄ gets oxidized, N₂O₄ gets reduced.