how much time in seconds will it take a cart to reach the bottom of the track?assume the cart starts from rest, the track is 1.5 m long and the distance covered by the cart is 1.5 m.

Answers

Answer 1

Around 80 times we should expect it to land on B.

What is time?

Time is basically a measure of non-stop, consistent change  in our own surroundings. Usually we can see through a specific point of view. Concept of time is self-evident and intuitive. Describing the fundamental nature of time is quite difficult.

The general time formula of the any kind of  task that is given as [Time = Distance ÷ Speed]. for SI unit of time is seconds (s).

As per the given condition-

Spin circle=3

Time = 120 sec

the total is 3

the red and orange equals to 2

2/3 times 120

240/3

=80 times

Thus, the correct answer is 80 times.

To know more about time click-

https://brainly.com/question/26046491

#SPJ1


Related Questions

The frequency which, under the sampling theorem, must be exceeded by the sampling frequency is called the Nyquist rate. Determine the Nyquist rate corresponding to each of the following signals:a) x(t) = 1 + cos(2,000πt) + sin(4,000πt)b) x(t)= sin(4000 π t) / π tc) x(t)= 2 [sin(4000 π t) / πt]2

Answers

Nyquist rate = 2*(maximum signal frequency)

Sampling rate must exceed Nyquist rate in order to be able to fully reconstruct the signal.

a) x(t) = 1 + cos (2000πt) + sin(4000πt)

Frequency for each term:-

Term 1 is DC -> w₁ = 0

Term 2 -> w₂ = 2000π

Term 3 -> w₃ = 4000π

Maximum signal frequency (wm) =  4000π

Another way of saying this is that X(jw) = 0 for |w| > 4000π

Acc to Sampling theorem ws > 2wm, ws>8000π

So, the Nyquist rate is 8000π

b) x(t) = sin(4000πt) / πt

Using Fourier Transport table, we have X(jw) = 1 for |w| < 4000π

.0 for |w| > 4000π

Therefore, maximum signal frequency (wm) = 4000π

Acc to the sampling theorem ws > 2wm, ws > 8000π

c) x(t) = {sin(4000πt) / πt}²

We can rewrite the above function as x(t) = x₁(t) x₁(t), where,

x₁(t) = sin(4000πt) / πt

Using the convolution property X(jw) = (1/2π)X₁(jw) * X₁(jw)

We know that convolving a signal with itself will double the maximum frequency therefore:

Therefore, maximum signal frequency (wm) = 8000π

Acc to the sampling theorem ws > 2wm, ws > 16000π

Therefore, the frequency to determine the Nyquist rate is 16000π.

To learn more about frequency, refer: https://brainly.com/question/5102661

#SPJ4

the clock on the big ben tower in london reads 12 noon. if you travel away from the clock at a very high speed and view it with a telescope, you would see group of answer choices run faster than a clock in your vehicle. run slower than a clock in your vehicle. be frozen at 12 noon.

Answers

"The clock on the big ben tower in London reads 12 noon. If you travel away from the clock at a very high speed and view it with a telescope, you would see it run slower than a clock in your vehicle" (Option A) This phenomenon is known as Time Dilation.

What is time dilation?

Time dilation is defined in physics and relativity as the difference in elapsed time as measured by two clocks. It is either owing to a difference in relative velocity or a difference in gravitational potential between their places.

When left undefined, "time dilation" generally refers to the impact of velocity.

Time dilation is the "slowing down" of a clock as determined by an observer in relative motion with regard to that clock under the theory of special relativity.

Learn more about Time Dilation:

brainly.com/question/1933572

#SPJ4

[NOTE: THIS IS AN INCOMPLETE QUESTIO. THE COMPLETE QUESTION IS:

Suppose you look at the huge clock on the Big Ben Tower in London and it reads 12 noon. If you could travel away from the clock at the speed of light and view it with a telescope, it would:

a) run slower than usual

b) run faster than usual

c) be frozen at 12 noon]

. how does the energy of photons change as they travel from the core to the surface of the sun? explain the methods of energy transfer that occur and why they change as the photons travel from the core.

Answers

As the photons travel from the center to the surface, their energy decreases; they cool to a temperature of about 6000 K, which is similar to the sunlight we observe.

Conduction is quite ineffective in this situation, but convection does contribute—it begins at the outer core. The outer core provides energy to the inner convection cells, which then interact with the outer convection cells.

However, radiation is the main cause. It takes a photon a long time to reach the surface because after it emits, hits something, and is excited by that something, the photon is then released once more in an arbitrary direction.

What does radiation signify from a physics perspective?

Radiation is the name for energy that comes from a source and travels through space at the speed of light.

To know more about Photons changes visit:

https://brainly.com/question/2142869

#SPJ4

If the sun mysteriously gets twice as massive as it is right now, what effect will it have on its pull on mars?.

Answers

Answer:

well, it would start burning it slowly. but it wouldn't just melt it immediately. then, if it got any bigger it would definitely melt it

Explanation:

at what temperature is the reading on a fahrenheit scale twice the reading on a celsius scale? express your answers, separated by a comma, to three significant figures.

Answers

The reading on the Fahrenheit scale is twice the temperature on the Celsius scale at 160 degrees Celsius.

Relationship between Fahrenheit scale and Celsius scale

F=9C/5+32

Applying the given condition

2C=F (given)

Replace F in the first formula with 2C from the second,

Then 2C = 9C/5+32

Subtract 9/5C from both sides,

2C-9C/5=32

1C/5=32

C= 160 degrees

Therefore 160 degrees Celsius scale is twice as long as the Fahrenheit scale

To learn more about temperature click here https://brainly.com/question/11464844

#SPJ4

a majorette in a parade is performing some acrobatic twirlings of her baton. assume that the baton is a uniform rod of mass 0.120 kgkg and length 80.0 cmcm . figure1 of 1 part a initially, the baton is spinning about an axis through its center at angular velocity 3.00 rad/srad/s . (figure 1)what is the magnitude of its angular momentum about a point where the axis of rotation intersects the center of the baton? express your answer in kilogram meters squared per second.

Answers

The magnitude of its angular momentum about a point where the axis of rotation intersects the center of the baton is  1.92*10^-2 kg*m^2/s and angular momentum of rod 7.68*10^-2 kg*m^2/s.

The axis of rotation intersects the center of the baton is  1.92*10^-2 kg*m^2/s

A)

Moment of inertia of rod = 1/12*m*L^2

= 1/12*0.12*0.8^2 = 0.0064

Angular momentum = I*ω

= 0.0064*3

= 0.0192 = 1.92*10^-2 kg*m^2/s

B)

Moment of inertia of rod = 1/3*m*L^2

= 1/3*0.12*0.8^2 = 0.0256

Angular momentum = 0.0256*3 =

00768 = 7.68*10^-2 kg*m^2/s

Learn more about axis of rotation here:

https://brainly.com/question/13587879

#SPJ4

unpolarized sunlight with intensity 1000 w m2 is incident on two polarizers, whose transmission axes make an angle of 30◦ . calculate the intensity of the transmitted light from the second polarizer. select one of

Answers

The intensity of the transmitted light from the second polarizer is 375 W/m².

Let the two polarized sunlight be P₁ and P₂

Given,

Angle between P₁ and P₂ = 30⁰

Intensity of the unpolarized sunlight = 1000 W/m²

Now,

Angle between P₁ and P₂ = 90⁰ - 30⁰ = 60⁰

The intensity of light transmitted by P₁ is

I₁ = I₀/2 = 1000/2 = 500 W/m²

According to Malus law the intensity of light transmitted by P₂ is

I₂ = I₁ cos²30⁰ = 500[(√3)/2]² = 375 W/m²

Therefore, The intensity of the transmitted light from the second polarizer is 375 W/m².

To know more about the intensity, refer: https://brainly.com/question/13991890

#SPJ4

a ceiling fan at rest is turned on and reaches a speed of 12.5 rad/sec in 2.4 sec. how many revolutions does it rotate during this time?

Answers

5.20rad/sec revolutions does it rotate during this time.

What is average velocity?

Average velocity is a sign of a vector. Average velocity is defined as the difference between a change in position or displacement (x) and the intervals of time (t) during which it occurs. The average velocity may be positive or negative depending on how the displacement is dispersed.

According to the equation v = s/t, velocity (v) is a vector quantity that measures displacement (or change in position, s), over change in time (t).

velocity = number of revolutions / time

12.5 rad/sec = number of revolutions/time

number of revolutions = 12.5/ 2.4

number of revolutions = 5.20rad/sec.

To know more about revolutions visit:

https://brainly.com/question/2284352

#SPJ1

the plates of a parallel plate capacitor are separated by 0.1mm of bakelite dielectric. if the bakelite has a dielectric constant of 4.9 and the plates have an area of 0.0049 m2 , what is the capacitance in nf?

Answers

if the plates of a parallel plate capacitor are separated by 0.1mm of bakelite dielectric, and the bakelite has a dielectric constant of 4.9 and the plates area 0.0049m^2, the capacitance is 2.126nF

What is capacitance?

It is the ability of a component or circuit to collect and store energy in the form of an electrical charge. Capacitors are energy-storing devices available in many sizes and shapes.

How to calculate the capacitance in nF?

The formula of capacitance of the capacitors is with dielectric constant as follows :
C = Kε₀A / D

where
C = Capacitance

k = dielectric constant

ε₀ = permittivity free space

d = distance between the plate

A = area between the plate

we are using this formula because it said parallel plate capacitor.

from the question given as follows :
k = 4.9 (dielectric constant)

d = 0.1mm = 1 * 10^-8 m^2

A = 0.0049m^2

ε₀ = 8.854 * 10^-12 F/m (from literature, permittivity of the free space)

C = 4.9 * 8.854*10^-12 * 0.0049 / 1 * 10^-8

C = 0.000021258454

C = 2,125.845 * 10^-12 F

C = 2.125845 * 10^-9 F

C = 2.126nF (rounded)

Therefore, the capacitance is 2.126nF for the plates.

Learn more about capacitance https://brainly.com/question/29217661

#SPJ4

certain stars, like betelgeuse, have a lower surface temperature than the sun and yet are more luminous. how do these stars produce so much more energy than the sun?

Answers

Some stars, like Betelgeuse, are more bright and produce a lot more energy than the Sun despite having a lower surface temperature. This is as a result of their expansion into massive stars. Because of their considerably larger size (each portion of the star's surface is cool, but there are so many bits that, collectively, the stars send out more energy), they generate more total energy.

The mass of a star is always drawn toward its core by gravity. There is a mechanism that can prevent a star from collapsing due to gravity, and there is a "balance" between them at different times in a star's life.


When a star is in equilibrium, the gamma rays produced by fusion in the center of the star fight against the inward gravitational collapse. In general, balances are reached when a "fuel" (element) hot enough to fuse is present in the core, as is the case during the main-sequence stage when hydrogen fusion takes place and during helium core fusion following the helium flash

Astronomers who desire to study the evolution of stars can benefit greatly from stellar clusters. It is plausible to believe that each star in a cluster emerged from the same cloud of gas and dust at roughly the same time. The only first distinction between the stars is hence their mass (and not their composition or the time that they began). Additionally, by monitoring where a cluster of stars' stars are now departing the main sequence, we can infer the age of the cluster because high-mass stars evolve considerably more swiftly than low-mass stars do.

To learn more about Stars -

https://brainly.com/question/2050020


#SPJ4



assuming that the wave’s frequency ω remains constant, create a plot of the wavelength λ as a function of the current speed u. as u increases, what do you expect to happen to i) the wave’s length? ii) the wave’s amplitude? iii) the wave’s steepness? (5p)

Answers

Wavelength(λ) will increase with increasing velocity. The graph is attached below, where x-axis indicates wavelength and y-axis indicates velocity.Wave’s amplitude will remain unaffected with increasing velocity.The wave’s steepness will decrease with increasing velocity.What are wave characteristics?

A wave is a propagating dynamic disturbance of one or more quantities. Waves can be periodic, in which these quantities repeatedly oscillate around their equilibrium values ​​at specific frequencies.

Whether vibrations or waves, they can all be characterized by four characteristics: Amplitude, Wavelength, Frequency, Velocity.

u = ωλ

Where, u = velocity of the wave

ω = frequency of wave

λ = wavelength of wave

For the first case:

If the wave’s frequency ω remains constant, then the velocity of wave will be proportional to wavelength:

u ∝ λ

So, if the velocity increases then there will be an increase in wavelength.

For the second case:

The amplitude of the wave is completely independent of the speed of propagation u and depends only on the amount of energy in the wave.

So, there will be no change of amplitude.

For the third case:

Wave steepness is the ratio of wave height(H) to wave length(λ).

Wave steepness = H/λ

This indicates that wave steepness is inversely proportional to wavelength.

Wave steepness ∝ 1/λ

But we know,

u ∝ λ

Then,

Wave steepness ∝ 1/λ ∝ 1/u

So, according to above application wave steepness in inversely proportional to velocity. This means that steepness will decrease with increasing velocity.

To know more about waves, visit:

https://brainly.com/question/16263433

#SPJ1

What would be the final speed of a 40g car released from an initial height of 25cm?
What would be the final speed of a 600g car released from an initial height of 115cm?

Answers

Answer:

Below

Explanation:

Potential Energy of the cars is turned into Kinetic Energy (ignoring friction)

mgh = 1/2 mv^2       divide both sides by 'm'

gh = 1/2 v^2               solve for v

v = sqrt (2gh)            Note that the mass of the cars is irrelevent

For the first car :     25 cm = .25 m

                                  v = sqrt (2 * 9.81* .25) = 2.2 m/s

 Similarly , for car 2      v = 4.8 m/s           (115 cm = 1.15 m)

Why do astronomers suspect that a supernova explosion occurred near the nebula that gave birth to the solar system?.

Answers

Astronomers suspect that a supernova explosion occurred near the nebula that gave birth to the solar system because it  generated telltale patterns of unstable, short-lived radioactive isotopes.

Did a supernova cause the solar system to form?Our solar system may have formed when a cataclysmic supernova explosion's shockwave collided with a gas cloud.Samples of early meteorites still contain traces of the material ejected from the ancient blast.The supernova explosion that gave birth to our sun may have also contributed to the rotation of our solar system, enabling the construction of the planets, including Earth, according to scientists researching this process.The shock wave from a supernova may have had enough energy to crush the dust cloud before it, according to earlier research. And investigators have looked for signs of that explosion: Radioactive isotopes that are unstable and short-lived form distinctive patterns after supernovae.The identification of these anomalies' telltale signs in prehistoric rocks would support the theory that a supernova sparked the formation of the solar system.

What Is a Supernova?The largest explosion that humans have ever witnessed is a supernova. Each blast is the extremely bright, super-powerful explosion of a star.

Can learn more about supernova from https://brainly.com/question/24811835

#SPJ4

if the distance between two charges is doubled, what will happen to the force between the charges? (4 points)

Answers

The force between them is reduced to 1/4 when the distance between the two charges is doubled. The force between them is inversely proportional to the distance.

What is coulomb's law?

Charged bodies experience a force of attraction or repulsion on approach.

From Coulomb's Law, it is possible to predict what the electrostatic force of attraction or repulsion between two particles will be according to their electric charge and the distance between them.

From Coulomb's Law, the electric force with which two point charges at rest attract or repel each other is directly proportional to the product of the magnitude of both charges and inversely proportional to the square of the distance that separates them:

[tex]F=k\frac{Qq}{d^{2}}[/tex]

where:

F is the electrical force of attraction or repulsion. It is measured in Newtons (N).

Q and q are the values ​​of the two-point charges. They are measured in Coulombs (C).

d is the value of the distance that separates them. It is measured in meters (m).

K is a constant of proportionality called Coulomb's law constant. It depends on the medium in which the charges are located.

Thus, force is reduced to 1/4.

To know more about coulomb's law:
https://brainly.com/question/506926
#SPJ4

1. we assumed that no mechanical energy is transferred to thermal energy, but saw that at least a little mechanical energy is lost. Can this explain the difference between the spring constants you found in part 1 and part 2? Please explain ?2. The mass of the puck is difficult to measure because it sublimates and looses mass over time. Can this explain the difference between the spring constants you found in part 1 and part 2.

Answers

No mechanical energy is transferred to thermal energy, but saw that at least a little mechanical energy is lost as heat.

1. Due to the vertical oscillation of the pluck connected with the spring, the spring is getting compressed and elongated. There are inter atomic bonds of the material with which the spring is made of. When the spring is getting compressed or elongated atoms connected with inter atomic bonds also gets compressed for elongated. This causes some of the bonds to break.

We know each bond is having some internal energy stored in it. So when the bond breaks that internal energy is emits in the form of thermal energy. Hence we see that some of the energy of oscillation is getting used in breaking the bond. This mechanical energy is getting lost. So with each period of oscillation the energy associated with the oscillating spring mass system decays with time.

Hence the amplitude of oscillation also decrease with time. Since by applying a certain amount of force to the pluck we are getting little small displacement compared to the actual displacement hence the corresponding spring constant will also be different compared to the actual one.

2. We know the spring constant is here define as the the ratio of applied force with the displacement of the mass. Here the force is  the resultant of the weight of the mass and the the buoyancy force on the mass by the liquid. But when we sublimate the mass inside the liquid it loses mass with time. Hence the force on the spring also decays with time. Hence the the displacement of the mass also decays with time. Which implies the spring constant also changes.

Thermal power refers back to the energy contained inside a device this is liable for its temperature. warmness is the go with the flow of thermal electricity. an entire branch of physics, thermodynamics, offers with how heat is transferred among specific systems and how paintings is accomplished within the method (see the 1ˢᵗ law of thermodynamics).

Learn more compressed here:-

https://brainly.com/question/7602497

#SPJ4

the cosmic microwave background tells us a lot about our universe, including what shape it is, geometrically! what shape do we believe the universe is, and based on which property of the cmb?

Answers

We believe that the shape of the universe is geometrically flat based on critical density of the CMB.

New measurements of the cosmic microwave background by the Atacama Cosmology Telescope find that the universe is flat, with a density matching the critical density. There is no evidence of deviation from flatness. According to ACT scientists, the interpretation that the deviation seen by Planck is a statistical fluctuation.”

The CMB is useful to scientists because it helps us learn how the early universe was formed. It is at a uniform temperature with only small fluctuations visible with precise telescopes. By studying these fluctuations, cosmologists can learn about the origin of galaxies and large-scale structures of galaxies and they can measure the basic parameters of the Big Bang theory.

To know more about cosmic microwave background

https://brainly.com/question/28197648

#SPJ4

if the power delivered were 59.32 kw, evaluate the outer surface temperature, in k, and the rate of entropy production, in kw/k, for the gearbox as the system, keeping input power, h, and a from example 2.4 the same.

Answers

In the case of the gearbox as the system, the outer surface temperature is 297 K, and the rate of entropy formation is 2.3*10-3kW.A surface's temperature is its ambient temperature.

More specifically, it can be talking about: Surface temperature, the temperature of the air at the earth's Surface temperature. A state of disorder, randomness, or uncertainty are frequently associated with the scientific notion of entropy, which is also a quantifiable physical attribute. Since work is produced by ordered molecular motion, entropy also serves as a proxy for a system's molecular disorder or unpredictability.

Q = ha(Ta-Tb) (Ta-Tb)

Q = (0.171)((1.0)(347k) (347k)

Q = 2.3*10^-3kW

Learn more about entropy here

https://brainly.com/question/17278266

#SPJ4

the interaction between two waves that meet is called a. reflection. b. refraction. c. diffraction. d. interference. please select the best answer from the choices provided a b c d

Answers

The interaction between two waves that meet is called interference.

Interference is a phenomenon of wave interactions. When two waves meet at a point, they cancel each other out.

There are two types of interference, constructive and destructive.When the crests or troughs of two interfering waves meet, their amplitudes add up. This principle is known as constructive interference. When the opposite happens and it's called destructive interference. When the crest and trough of two interfering waves meet, one amplitude is subtracted from the other.Wave interference is a phenomenon that occurs when two waves meet while traveling through the same medium.Interference of waves causes the medium to take on a shape that results from the net effect of two individual waves on the particles of the medium.

Answer d. interference is the correct answer

To know more about interference,

https://brainly.com/question/14719807

#SPJ4

in an electric motor, a commutator a. is made out of dozens of wire loops wrapped around a ferromagnetic core. b. repeatedly reverses the flow of current through the armature. c. is a magnet. d. is directly connected to the current source. please select the best answer from the choices provided a b c d

Answers

Commutators are used in DC machinery, such as universal motors and DC generators. A motor's windings get an electric current from a commutator. By reversing the direction of the current in the spinning windings every half turn, a constant rotational torque is generated.

According to this option b) is correct.

Describe a DC machine.

An electro-mechanical energy conversion system is known as a DC machine. There are two different kinds of DC machines: a DC motor and a DC generator. A DC motor transforms D.C. electrical power into mechanical power (ωT), whereas a DC generator converts mechanical power (T) into DC electrical power (EI).

What does a DC machine do?

An electrical device called a DC generator's principal job is to turn mechanical energy into electricity. Based on the electromagnetic induction theory of Faraday's Laws, an emf will be produced when the conductor cuts the magnetic flux.

To know more about DC machines visit:

https://brainly.com/question/13761826

#SPJ4

An object of an unknown mass is attached to an ideal spring with force constant 120 N/m and is found to vibrate with a frequency of 6.00 Hz.
Find:
(a) the period
(b) the angular frequency
(c) the mass of this object.

Answers

An object of an unknown mass is attached to an ideal spring with force constant 120 N/m and is found to vibrate with a frequency of 6.00 Hz: =0.0845 kg.

(a) Time period, T = 1/f = 1/6.0 = 0.167 s

(b) Angular frequency, ω = 2πf = 6.28x6 =37.7 rad/s

(c) For the mass, use the formula. ω2 =k/m

        So, mass, m =k/ ω2

                          = 120/37.68x37.68

                           =0.0845 kg.

In physics, a force is a power that may change the movement of an object. A force can purpose an object with mass to trade its velocity, i.e., to accelerate. pressure can also be defined intuitively as a push or a pull. A force has both significance and path, making it a vector amount.

Learn more about force here:

https://brainly.com/question/12970081

#SPJ4

you are watching an object that is moving in shm. when the object is displaced 0.600 m to the right of its equilibrium position, it has a velocity of 2.20m/s to the right and an acceleration of 8.40m/s2 to the left. for related problem-solving tips and strategies, you may want to view a video tutor solution of velocity, acceleration, and energy in shm.

Answers

The object can move as farther as 0.2m.

Using the Sine Equation,

= x(t) = Asin(ωt)

=Here, t=0, x=0,

Given that,

Distance = x(t) = 0.60 = A sin(ωt)

Velocity = v(t) = 2.20 m/s = Aωcos(ωt)

Acceleration = a(t) = 8.40 m/s² = -Aω²sin(ωt)

Using wave equation,

= x(t) / a(t) = A sin(ωt) / -Aω²sin(ωt)

= ω² = 14 rad²/s²

= ω = 3.74 rad/s

The amplitude of the motion =

=  x(t) / v(t) = A sin(ωt) / Aωcos(ωt)

= A = 0.2 m

Therefore, the amplitude of the motion is 0.2 m

To know more about Amplitude: brainly.com/question/7562439

#SPJ4

a particle of charge q and mass m is moving with a velocity v along the x-axis in a magnetic field b which is along the z-axis. how much time will it take for the particle to return to its original location

Answers

The time required for the particle to return to its original location is (2πm/Bq) s.

We have to see the direction of magnetic force works on a particle. Using right-hand rule

Point your pointer finger according to the direction particle is moving. To the x-axis.Point your middle finger in the direction of the magnetic field. To the z-axisYour thumb points to the direction of the magnetic force pushing on the particle. To -y-axis.

The magnetic force will deflect the direction of the particles so that the particles will move in a circle. The magnetic force becomes the centripetal force because it always points to the center of the circle.

Fc = Fm

[tex]m \frac{v^2}{R} \:=\: Bqv[/tex]

mv² = BqvR

mv = BqR

[tex]R \:=\: \frac{mv}{Bq}[/tex]

R = mv ÷ Bq

If the particle return to its original location, it means the particle travel one full circle. According to uniform motion

t = d ÷ v

t = perimeter of the circle ÷ v

t = 2πR ÷ v

t = (2πmv ÷ Bq) ÷ v

t = (2πm ÷ Bq) s

t = [tex]\frac{2 \pi m}{Bq}[/tex]

t = (2πm/Bq) s

Learn more about the magnetic fields here: https://brainly.com/question/28945412

#SPJ4

a child on a swing set swings back and forth with a period of 3.3 s and an amplitude of 25°. what is the maximum speed of the child as she swings?

Answers

A child on a swing set swings back and forth with a period of 3.3 s and an amplitude of 25° the maximum speed of the child as she swings is approximately 0.829 m/s.

To find the maximum speed of the child as she swings, we can use the formula for the velocity of an object in simple harmonic motion:

v = Aωcos(ωt)

where A is the amplitude of the motion, ω is the angular frequency (ω = 2π/T, where T is the period of the motion), and t is the time.

Given:

- T = 3.3 s (period of the motion)

- A = 25° (amplitude of the motion)

To use the formula, we need to convert the amplitude from degrees to radians:

- A = 25° * (π/180)

= 0.4363 radians

Now we can calculate the angular frequency:

- ω = 2π/T

= 2π/3.3

= 1.90 rad/s

At the maximum displacement (when the child is at the bottom of the swing), the velocity is at its maximum.

At this point, cos(ωt) = 1, so we can simplify the formula to:

v = Aω

Substituting the values, we get:

- v = 0.4363 radians * 1.90 rad/s = 0.829 m/s

Thus, the maximum speed of the child as she swings is approximately 0.829 m/s.

For more details regarding velocity, visit:

https://brainly.com/question/34025828

#SPJ12

Three identical train cars, coupled together, are rolling east at speed . A fourth car traveling east at catches up with the three and couples to make a four-car train. A moment later, the train cars hit a fifth car that was at rest on the tracks, and it couples to make a five-car train. What is the speed of the five-car train?

Answers

There are two collisions occurring in this question, finally after two collisions the now the five-car train is moving [tex]V_{0}[/tex] velocity, by the conservation of momentum principle.

What is Conservation of Momentum?

According to the Principle of Conservation of Momentum, when two objects meet, their total momentum is the same before and after the collision (provided that no external forces - for example, friction - act on the system). This is incredibly helpful since it means you can predict what will happen following a collision before it occurs.

What are the Calculations?

First collision (between three-car trains and a fourth car moving with 2[tex]V_{0}[/tex] in the same direction)

We will apply conservation of momentum to calculate the velocity of the train after the first collision

M1V1 + M2V2 = (M1 + M2)V 3M([tex]V_{0}[/tex])  + M2[tex]V_{o}[/tex] =  (3 M + M)V .(5M)V. V (4M.V) V = [tex]\frac{5}{4} Vo[/tex]

Now the mass of the four-car train is 4M and is moving with a velocity of  [tex]\frac{5}{4} Vo[/tex]

Second collision  (between four-car trains and fifth car at rest)

Again we will apply conservation of momentum to calculate the velocity of the train after the second collision

M1V1 + M2V2 = (M1 + M2)V   (4M  ×  [tex]\frac{5}{4} V_{o}[/tex]) + (M × 0) = (4 M + M)V (5M)[tex]V_{o}[/tex] = (5M)V. V = [tex]V_{o}[/tex]

Finally, after two collisions the now the five-car train is moving [tex]V_{0}[/tex] velocity.

To know more about the Conservation of momentum, check out:

https://brainly.com/question/7538238

#SPJ4

what happens to the gravitational force between two objects if the distance between them triples? (1 point)

Answers

Gravitational force between two objects if the distance between them triples reduces by 9.

What is gravitational force ?

The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them, according to Newton's universal law of gravitation. The force constantly tries to pull different masses towards each rather than pushing them apart from each other we tend to refer to this force of attraction as gravity.

Gravitational force [tex]F[/tex]  = [tex]G\frac{m_{1} m_{2} }{r^{2} }[/tex]

where m1 = mass of object 1

m2 = mass of object 2

G gravitational constant

r = distance between the two object

If the distance between the two object is triples i.e. r = 3r

Then Gravitational force [tex]F^{'} = \frac{F}{(3r)^{2} }[/tex]  =

[tex]F^{'} = \frac{F}{9r}[/tex]

Thus gravitational force between the object will reduce by a factor of 9.

To learn more about gravitational force click here:

https://brainly.com/question/3009841

#SPJ4

two people hear a tornado siren, but one listener is 71.1 times farther away from the source of the sound than the other. what is the intensity level of the sound (in decibels) for the more distant listener relative to that for the nearer listener? relative intensity:

Answers

-37.03 dB is the intensity level of the sound for the more distant listener relative to that for the nearer listener.

What is intensity level?

The intensity level of a sound, in decibels, is described as 10 times the logarithm to the base 10 of the ratio of the intensity of this sound to a reference intensity.

By using the inverse square law,

As one listener is 71.1 times farther away from the source of the sound than the other.

Then Increasing the distance by 71.1 times reduces the intensity by

(71.1)^2 = 5055.21

The intensity level of the sound (in decibels) for the more distant listener relative to that for the nearer listener is:

= 10log(ratio of intensities)

= 10log(1/5055.21)

= 10log(0.00019782)

=10 × -3.7028

= -37.03 dB (The negative sign represents the sound is less intense for the farther listener)

So, the intensity level of the sound (in decibels) for the more distant listener relative to that for the nearer listener is -37.03 dB.

Learn  more about intensity level at;

https://brainly.com/question/10287755

#SPJ1

50 g of sugar is dissolved in 500 g of water. What is the percent by mass of salt?
HINT: find the total mass of the solution first.

Answers

The percentage by mass of the salt, given it was dissolved in 500 g of water is 9.09%

How do I determine the percentage of the salt?

we'll begin by obtaining the mass of the solution. This is shown below:

Mass of salt = 50 gramsMass of water = 500 gramsMass of solution =?

Mass of solution = Mass of salt + Mass of water

Mass of solution = 50 + 500

Mass of solution = 550 grams

Finally, we shall determine the percentage of the salt. Details below:

Mass of salt = 50 gramsMass of solution = 550 gramsPercentage of salt =?

Percentage = (mass of solute / mass of solution) × 100

Percentage of salt = (50 / 550) × 100

Percentage of salt = 9.09%

Thus, the percentage of the salt is 9.09%

Learn more about percentage composition:

https://brainly.com/question/11952337

#SPJ1

a battery is several electrochemical cells stacked together. please select the best answer from the choices provided t f

Answers

True; A battery is several electrochemical cells stacked together.

A source of electricity made up of one or more electrochemical cells with connections on the outside that can be used to run electrical appliances is known as an electric battery.

The cathode and anode of a battery are represented by their positive and negative terminals, respectively, when it is supplying electricity.

Electrons will come from the terminal labeled "negative" and travel to the terminal labeled "positive" via an external electric circuit. When a battery is connected to an external electrical load, a redox reaction changes high-energy reactants into lower-energy products, and the free-energy difference is sent to the external circuit as electrical energy. Historically, a "battery" was a device made up of numerous cells; however, the phrase has come to be used to describe a single cell as well.

Learn more about battery here:

https://brainly.com/question/12999755

#SPJ4

a 12 kg runaway grocery cart runs into a spring, attached to a wall, with spring constant 290 n/m and compresses it by 80 cm . part a what was the speed of the cart just before it hit the spring? neglect any friction.

Answers

The initial speed of the cart is  1.3m/s.

The velocity of an object is the rate of change of its position with respect to a given time interval.

Given

Mass m of the cart  = 12kg

Spring constant =290 N/m.

The compressed length of the spring  = 10 cm.

The initial kinetic energy of the cart is given below.

    K.E. = 1/2 m v2

    v =  initial velocity of the cart.

When the cart hits the spring, it is compressed by the cart. When the cart stops, due to the maximum compression, the kinetic energy of the cart will be zero. Hence its kinetic energy will be converted into elastic potential energy of the spring. This is given as,

U = 1/2 kx²

k = spring constant

x = compressed length of the spring.

This elastic potential energy of the spring will be equal to the initial kinetic energy of the cart.

U = 1/2 * 290*(0.80)² = 0.64.

U = 64J.

Elastic potential energy of the spring will be equal to the initial kinetic energy of the cart.

64 = (1/2) * 80 * v²

128 = 80 * v²

v² = 128/ 80

v² = 1.6

v = 1.26 ≅ 1.3

find more:-https://brainly.com/question/9421327

#SPJ4

two of the three atoms in a molecule of water (h2o) are hydrogen. why are earth’s oceans not fusing hydrogen into helium, transforming our planet into a star?

Answers

The earth’s oceans is not fusing hydrogen into helium, transforming our planet into a star because Protons (hydrogen nuclei) carry positive electric charge and thus repel each other.

The earth as a planet?

The third planet from the sun, Earth is the only place in the known universe confirmed to host life and has a radius of 3,959 miles, Earth is the fifth largest planet in our solar system, and it is the only one known for sure to have liquid water on its surface.

In order for two protons to come close enough to each other that the nuclear force that has short range can bind them, they must be moving at very high speeds.

This is only possible at temperatures in the solar core, but it is very hard to achieve these temperatures on Earth, thus the reason why fusion power has been so difficult to develop.

Learn more about planet at : https://brainly.com/question/18496962

#SPJ1

Other Questions
alpha polonium crystallizes in a simple cubic unit cell with an edge length of 336 pm. what is the density of alpha polonium (in g/cm^3)? Write a paragraph about the 1887 Jim Crow law Describe the world-system theory by describing it as well as naming and discussing all its components. what is the role of the brain in producing the fight-or-flight stress response? select all that apply. wildhorse supply does not segregate sales and sales taxes at the time of sale. the register total for march 16 is $10,706. all sales are subject to a 6% sales tax. (a1) compute sales taxes payable. sales taxes payable $enter sales taxes payable in dollars 12 is 30% of what number? a family that consists of one man, several wives, and the biological children of the man and the women is a(n) family. According to peacemaking, what does the metaphor War on Crime imply? Make a connection: After reading this article, write down any connection you can make to it (text-to-text, text-to-self, or text-to-world). Explain this connection and how it can help you remember what you read.Rosa Parks and the Montgomery Bus Boycott: December, 1955 Alabamas segregation laws continued despite Supreme Court rulings. One December evening, Rosa Parks was riding a crowded Montgomery City Lines bus home from work. The driver of the bus ordered her to move to the back so that a white man could have her seat. Parks, who was a well-known activist and former secretary for the NAACP, refused. She was arrested and put in jail. Her arrest triggered an outcry from the black community of Montgomery. Several women of the NAACP proposed that all blacks in the city boycott the buses. To support this protest, black leaders formed the Montgomery Improvement Association (MIA) and chose Dr. Martin Luther King Jr. as its head. The boycott lasted over a year from December 5, 1955 to December 20, 1956 where blacks either walked or carpooled to get to and from work. This cost the bus company roughly 65 percent of its income. Downtown merchants in Montgomery even reported losses of close to $1 million. The boycott met with backlash from whites. Police harassed black protesters, King was arrested and jailed for several days, and even his house was bombed. Still, King encouraged the protesters to limit their actions to civil disobedience, or nonviolent protest against unjust laws. Eventually, in 1956, the MIA filed a federal lawsuit to end bus segregation in Montgomery. Nearly a year after Rosa Parks arrest, the Supreme Court ruled that segregation on Alabama buses was unconstitutional. Suppose that y varies directly with x, and y= 8 when x = 2. find y when x is -5 julia alvarez has said that pone of the things that interested her while writing the novel was the question, what politicizes a person? the system requires active focus and facilitates deliberate thinking, whereas the system requires minimal attention and allows for effortless processing. cirque de soleil's shift from animals, candy and beverage concessionaires in the aisles, and feature performers to a live theater, operatic-style format exemplifies this type of value innovation: group of answer choices reduce create eliminate raise the metamorphosed marble around the solidified granitic (felsic) magma must be younger than the limestone according to the principle of: please help me! i have a test rn and i am struggling. please send answer ASAP!!Find an equation for line l,m,n,p convert the following potentials. the ag | agcl and calomel reference electrodes are saturated with kcl. (a) 0.523 v versus s.h.e. ? ? versus ag | agcl (b) ?0.111 v versus ag | agcl ? ? versus s.h.e. (c) ?0.222 v versus s.c.e. ? ? versus s.h.e. (d) 0.023 v versus ag | agcl ? ? versus s.c.e. (e) ?0.023 v versus s.c.e. ? ? versus ag | agcl Overall, research suggests that gender differences in the areas of intelligence and memory are ___________. How does the reader know that this story is written in the first person point of view question content area part 1 if, when a firm doubles all its inputs, its average cost of production increases, then production displays part 2 a. diminishing returns. b. economies of scale. c. declining fixed costs. d. diseconomies of scale. At a furniture store, 20% of chairs are blue, 50% orange and 30% black. A blue chair has a 20% probability of being comfortable. A chair that is not blue has a 5% probability of being comfortable. What is the probability that a comfortable chair in the store is blue?