Answer:
33.33 Watt
Explanation:
we know that P= W/t
W= work
t= time (in seconds)
so here
W= 100,000J
and t= 50 min= 50×60 sec= 3000 s
so P= 100,000/ 3000
=100/3 = 33.33Watt
Hi.
Please i need help with these questions.
Please show workings.
Answer:
see the pict for the answers
6. Classify each compound as ionic or molecular based on its properties.
Substance Melting Point Solubility Conductivity Classification
1 -55 oC poor poor
2 396 oC good good
3 0 oC not tested poor
4 200 oC good good
5 20 oC good poor
Answer:
1. c
2. ionic
3. c
4. ionic
5. alloy or ionic
Explanation:
The compound classification.
The compounds are classified as per several different criteria and one common elements is the specific element that is present this makes it an iconic or a molecular. The presence of the oxides, hydrides, and various atomic groups.
Hence the answer is melting point to conductivity classified as c, iconic, c, iconic, and alloy.
A poor conductor of electricity will have a conductivity classification of c. The 396 good conductors will be iconic and a 0 C not teste will have a conductivity of c. The 200 C of good conductor will be iconic and 20 C of good conductor will be alloy or iconic.Learn more about each compound as.
brainly.com/question/3110085.
The table below lists the properties of a metallic element.
shiny, silver colored, forms +1 and +2 ions, compound with sulfur is bright red.
Where on the periodic table would this element most likely be found?
Group 1
Group 2
Group 12
Group 13
Answer:
Group 12
Explanation:
Answer:
I got all answers correct on my test and got 100%, this question was in the test which got correct
so your answer is group 12
Explanation:
A wooden block has a mass of 562 g and a volume of 72 cm3. What is the density rounded to the nearest tenth!
Answer:
The answer is 7.81 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{562}{72} \\ = 7.80555555...[/tex]
We have the final answer as
7.81 g/cm³Hope this helps you
Answer:
r
Explanation:
13
0121
This question is about sodium and chlorine.
FIGURE 2 shows the positions of sodium and
chlorine in the periodic table.
FIGURE 2
CI
Na
02
State ONE difference and ONE similarity in t
electronic structure of sodium and of chlori
[2 marks]
The question is asking you to compare each elements electrons, specifically valence since it mentioned their placement on the table.
Similarly: they both are only one electron away from stability (a full octet)
Difference: Sodium will want to loose the one electron, and Chlorine will take it.
How many moles of Mg2+
are in 6.4 X1022 ions?
Answer:
0.11 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{6.4 \times {10}^{22} }{6.02 \times {10}^{23} } \\ = 0.10631229...[/tex]
We have the final answer as
0.11 molesHope this helps you
schroedinger thought that electrons
Answer:
In Niels Bohr's theory of the atom, electrons absorb and emit radiation of fixed wavelengths when jumping between fixed orbits around a nucleus. The theory provided a good description of the spectrum created by the hydrogen atom, but needed to be developed to suit more complicated atoms and molecules.
Explanation:
which of the following statements is true?
A. A technology society has no impact on the environment.
B. A technology society has a completely positive impact on the environment.
C. A technology society has both a positive and negative impact on the environment
D. A technology society a completely negative impact on the environment.
Please select the best answer from the choices provided
Answer:
C. A technology society has both a positive and negative impact on the environment
Explanation:
We are using up earth's resources but bettering social society!
Have a nice day,
PumpkinSpice1♥
Heeeelp,,, serious answers only pls i dont wanna hear about your love life
What is the volume of 89.6 moles of gas at STP *
covalent compound formula for hydrogen monochloride
Answer:
HCl
Explanation:
1 hydrogen 1 chlorine
A 20.0g sample of metal with a specific heat of 5 J/(g°C) raised it's initial temperature to 40.0 when 500J heat was added. What was the initial temperature of the metal?
The initial temperature of the metal = 35 °C
Further explanationHeat can be formulated :
Q = m . c . ΔT
Q = heat, J
c = specific heat, J/g C
ΔT = temperature, °C
m = 20 g
c = 5 J/(g°C)
Q = 500 J
T₁ = 40 C
the initial temperature :
[tex]\tt \Delta t(T_2-T_1)=\dfrac{Q}{m.c}\\\\40-T_1=\dfrac{500}{20.5}\\\\40-T_1=5\\\\T_1=35^oC[/tex]
i need help with chem ????????
Answer:
69
Explanation:
Listening is a more complex process than hearing.
Arent listening and hearing and listening the same thing.
Bond energy needed to break or create bonds is measured in units called
A horsepower
B. calories
C. kilojoules
D. newtons
(Edit)
Correct Answer is "C"
Answer:
C. kilojoules
Explanation:
The bond energy needed to break or create bonds is measured in units called kilojoules.
Bond energy is a form of enthalpy change of a reaction or physical change. The bond energy is the heat content of a covalent bond formed from its constituent elements in the gas phase.
The bond energy is the same in value as the bond dissociation energy and its unit is given in kilojoules.
How many joules are released when 30.0 g of H2O(g) condenses at 100°C and cools to 10°C
Heat released : 79086 J
Further explanationCondenses :
1. phase change (gas - liquid) : heat of vaporization (ΔH vap for water = 2260 J/g)
2. cools from 100 - 10 : (Q=m.cΔT)
1. Q=m.ΔH vap
[tex]\tt Q=30\times 2260=67800~J[/tex]
2. Q=mc.ΔT(c water = 4.18 J/g C)
[tex]\tt Q=30\times 4.18\times (100-10)\\\\Q=11286~J[/tex]
Q tot = 67800 + 11286 = 79086 J
The solubility of gas in water at 25 C and 1.0 atm pressure of oxygen is 0.061 g/ L. What would the pressure be if the solubility of oxygen water at 25 C is 0.075 g/L
Answer:
P2 = 1.2265 atm (Approx)
Explanation:
Given:
Water temperature = 25 degree Celsius
Pressure = 1 atm
So,
P1/P2 = C1/C2
1 / P2 = 0.061 / 0.075
P2 = 1.2265 atm (Approx)
Which solution has the greatest number of hydroxide ions?
i need a friend....
Answer:
homogeneous solutions
How are the pressure and temperature of a gas related
Answer:
The pressure of a given amount of gas is directly proportional to its absolute temperature, provided that the volume does not change (Amontons's law). ... The volume of a given amount of gas is inversely proportional to its pressure when temperature is held constant (Boyle's law).
Answer:
pressure is directly proportional to temperature at constant volume
A boat sails into a bay and drops anchor. Several hours later, it is surrounded by mud. What
happened?
Answer:
the flow of the water pushed the mud around the anchor
Explanation:
The information regarding the mud should be explained below:
The following information should be considered:
In the case when it should be surronded by mud so there is low tide arise.it is occur at the time when the water retreats to its lowest level, moving away from the shore.Learn more: https://brainly.com/question/5763151?referrer=searchResults
When light waves hit ice, most of them bounce off and radiate back into space. Because of this, ice is best described as which kind of surface? reflective absorbent dense rough
The bouncing back of light waves observed when light waves hit ice and most of them bounce off and radiate back into space is called reflection.
What are light waves?Light waves are a form of waves which produces visible sensitization of the eyes
Light waves have properties of waves such as:
reflection refraction diffractioninterference, etc.When light waves hit ice, most of them bounce off and radiate back into space.
This property of light waves is known as reflection.
Learn more about reflection of light waves at: https://brainly.com/question/1191238
When light waves hit ice, most of them bounce off and radiate back into space, hence, ice is best described as a reflective surface.
What is a Reflective surface?A reflective surface is one which can cause incident light to bounce back (reflection).
According to this question, when light waves hit ice, most of them bounce off and radiate back into space. This means that most of the incident light reflects off the ice surface.
Therefore, the ice surface is best described as a reflective surface.
Learn more about reflection at: https://brainly.com/question/8553652
When Earth is tilted on its axis why does it orbit the sun ?
Answer:
Here
Explanation:
Some assume our planet's changing distance from the sun causes the change in the seasons. That's logical, but not the case for Earth. Instead, Earth has seasons because our planet's axis of rotation is tilted at an angle of 23.5 degrees relative to our orbital plane, that is, the plane of Earth's orbit around the sun
Which tool would be best to allow you to make observations of an object's color and texture?
A Digital Camera
B Balance Scale
C Graduated Cylinder
D Digital Thermonter
Answer:
A digital camera. You can zoom and all that stuff and see individual pixels when close up. Also none of the other options would make sense.
Explanation:
Be sure to use two (2) sources of information (one source can be your book). In your response, you MUST state your source. Your response should be between 100 and 150 words.
Answer:
^=E9>*t
Explanation:
Given the following equation:
2KMnO4 → K2MnO4 + MnO2 + O2
How many grams of KMnO4 are required to produce
1.60 grams of O2?
g
Mass of KMnO4 required : 31.607 g
Further explanationThe reaction equation is the chemical formula of reagents and product substances
A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products
Reaction
2KMnO₄ → K₂MnO₄ + MnO₂ + O₂
mol of O₂ :
[tex]\tt \dfrac{1.6}{16}=0.1[/tex]
mol ratio KMnO₄ : O₂ = 2 : 1
mol of KMnO₄ :
[tex]\tt \dfrac{2}{1}\times 0.1=0.2[/tex]
mass of KMnO₄ :
MW KMnO₄ : 158,034 g/mol
[tex]\tt mass=0.2\times 158,034 =31.607~g[/tex]
products or solutions found at home or in store and their characteristics
Answer:
bruh, just go in your bathroom and look for cleaning products
Explanation:
Rock salt mixed with ice actually lowers the temperature of the salt/ice mix. Physical or chemical property?
Answer:
chemical
Explanation:
Salt changes the chemical makeup of the water and allows it to get colder than what it would normally freeze at.
If an element is on the 4th row of the periodic table...how many energy levels/rings would you need to draw a Bohr 's model of the element's atom?
Answer:
4 energy levels/rings
Explanation:
By the atomic model proposed by Niels Bohr, the electrons orbit around the nucleus in shells having different energy level each with the ability to contain a given maximum amount of electrons.
The closest shell to the nucleus named the K shell, can have a maximum of two electrons, the next shell known as the L shell can have 8 electrons while the next shell, M, can have a maximum of 18 electrons
The arrangement of the periodic table is based on the number and location of electrons such that elements in the 4th row (period 4 elements) have three completed energy levels/rings before, their valence ring making the total number of rings = 4 energy levels/rings.
What is the mass of 1.34x10^24molecules of Iron? *
Answer:
Ion channel proteins allow ions to diffuse across the membrane. A gated channel protein is a transport protein that opens a "gate," allowing a molecule to pass through the membrane
Explanation:
What can you make with molecules
Answer:
water
Explanation:
Answer:
Explanation: Las moléculas se encuentran fuertemente enlazadas con la finalidad de formar materia. Las moléculas están formadas por átomos unidos por medio de enlaces químicos.