Answer:
344.8 x10^-8J/m³
Explanation:
Using=> energy intensity/ speed oflight
= 1000/2.9x10^8
= 344.8 x10^-8J/m³
The electromagnetic energy is 344.8 x10⁻⁸J/m³
We have to use the formula which says
Electromagnetic energy = energy intensity/ speed of light
We are given intensity as 1000 W/m²
Electromagnetic energy = 1000/2.9 x 10⁸
= 344.8 x 10⁻⁸J/m³
Therefore the electromagnetic energy is contained in each cubic meter will be 344.8 x 10⁻⁸J/m³
Read more on https://brainly.com/question/17136549
describe the relation among density, temperature, and volume when the pressure is constant, and explain the blackbody radiation curve
Answer:
in all cases with increasing temperature the density should decrease.
Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body,
Explanation:
Let's start for ya dream gas
PV = nRT
Since it indicates that the pressure is constant, we see that the volume is directly proportional to the temperature.
The density of is defined by
ρ = m / V
As we saw that volume increases with temperature, this is also true for solid materials, using linear expansion. Therefore in all cases with increasing temperature the density should decrease.
Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body, since all the radiation that falls on it is absorbed or emitted.
This type of construction has a characteristic curve where the maximum of the curve is dependent on the tempera, but independent of the material with which it is built, to explain the behavior of this curve Planck proposed that the diaconate in the cavity was not continuous but discrete whose energy is given by the relationship
E = h f
What is the average acceleration? Please show work!
Answer:
Explanation:
Average acceleration
= (final velocity - initial velocity) /time
= (50-0)km/h /30 s
= 50 * 1000 / 3600 m/s /s
= 13.89 m/s^2
For the last part of the lab, you should have found the mass of the meter stick. So if a mass of 85 g was placed at the 2 cm MARK and the pivot point was moved to the 38.6 cm MARK, what would have been the mass of the meter stick
Answer:
272.89g
Explanation:
Find the diagram to the question in the attachment below;.
Using the principle of moment to solve the question which states that the sum of clockwise moment is equal to the sum of anticlockwise moment.
Moment = Force * Perpendicular distance
Taking the moment of force about the pivot.
Anticlockwise moment:
The 85g mass will move in the anticlockwise
Moment of 85g mass = 85×36.6
= 3111gcm
Clockwise moment.
The mass of the metre stick M situated at the centre (50cm from each end) will move in the clockwise direction towards the pivot.
CW moment = 11.4×M = 11.4M
Equating CW moment to the ACW moment we will have;
11.4M = 3111
M = 3111/11.4
M = 272.89g
The mass of the metre stick is 272.89g
An ac circuit consist of a pure resistance of 10ohms is connected across an ae supply
230V 50Hz Calculate the:
(i)Current flowing in the circuit.
(ii)Power dissipated
Plz check attachment for answer.
Hope it's helpful
A certain dam generates 120 MJ of mechanical (hydroelectric) energy each minute. If the conversion from mechanical to electrical energy is then 15% efficient, what is the dam's electrical power output in W?
Answer:
electric energy ( power ) = 300000 W
Explanation:
given data
mechanical (hydroelectric) energy = 120 MJ/min = 2000000 J/s
efficiency = 15 % = 0.15
solution
we know that Efficiency of electric engine is expression as
Efficiency = Mechanical energy ÷ electric energy ......................1
and here dam electrical power output is
put here value in equation 1
electric energy ( power ) = Efficiency × Mechanical energy ( power )
electric energy ( power ) = 0.15 × 2000000 J/s
electric energy ( power ) = 300000 W
A particle of charge = 50 µC moves in a region where the only force on it is an electric force. As the particle moves 25 cm, its kinetic energy increases by 1.5 mJ. Determine the electric potential difference acting on the partice
Answer:
nvbnncbmkghbbbvvvvvvbvbhgggghhhhb
what tools use cut wood
Answer:
hand saws
power saws
Circular Saw
Explanation:
that is all that i know
C.
(11) in parallel
A potentiometer circuit consists of a
battery of e.m.f. 5 V and internal
resistance 1.0 12 connected in series with a
3.0 12 resistor and a potentiometer wire
AB of length 1.0 m and resistance 2.0 12.
Calculate:
(i) The total resistance of the circuit
The current flowing in the circuit
(iii) The lost volt from the internal
resistance of battery across the
battery terminals
(iv) The p.d. across the wire AB
(v) The e.m.f. of a dry cell which can be
balanced across 60 cm of the wire
AB.
Assume the wire has a uniform cross-
sectional area.
Answer:
fggdfddvdghyhhhhggghh
Calculate the moment of inertia of a skater given the following information.
(a) The 60.0-kg skater is approximated as a cylinder that has a 0.110-m radius.
(b) The skater with arms extended is approximately a cylinder that is 74.0 kg, has a 0.150 m radius, and has two 0.750 m long arms which are 3.00 kg each and extend straight out from the cylinder like rods rotated about their ends.
Answer:
(a) I = 0.363 kgm^2
(b) I = 1.95 kgm^2
Explanation:
(a) If you consider the shape of the skater as approximately a cylinder, you use the following formula to calculate the moment of inertia of the skater:
[tex]I_s=\frac{1}{2}MR^2[/tex] (1)
M: mass of the skater = 60.0 kg
R: radius of the cylinder = 0.110m
[tex]I_s=\frac{1}{2}(60.0kg)(0.110m)^2=0.363kg.m^2[/tex]
The moment of inertia of the skater is 0.363 kgm^2
(b) In the case of the skater with his arms extended, you calculate the moment of inertia of a combine object, given by cylinder and a rod (the arms) that cross the cylinder. You use the following formula for the total moment of inertia:
[tex]I=I_c+I_r\\\\I=\frac{1}{2}M_1R^2+\frac{1}{12}M_2L^2[/tex] (2)
M1: mass of the cylinder = 74.0 kg
M2: mass of the rod = 3.00kg +3.00kg = 6.00kg
L: length of the rod = 0.750m + 0.750m = 1.50m
R: radius of the cylinder = 0.150
[tex]I=\frac{1}{2}(74.0kg)(0.150m)^2+\frac{1}{12}(6.00kg)(1.50m)^2\\\\I=1.95kg.m^2[/tex]
The moment of inertia of the skater with his arms extended is 1.95 kg.m^2
The friends spend some time thinking about a beam of light traveling from one medium to another medium with higher index of refraction, which strikes the boundary obliquely. Which of Tristan's statements is correct
Answer:
"When light moves from a material in which its speed is high to a material in which its speed is lower, the angle of refraction θ2is less than the angle of incidence θ1and the ray is bent toward the normal."
Explanation:
Refraction is a phenomenon that occurs when light rays change direction after passing through a surface or medium. This is also known as 'bending'. Snell's law provides the relationship between the angle of incidence and refraction in the equation below:
n₁sinФ₁ = n₂sinФ₂
where n1 and n2 represent the two media and theta refers to the angles formed. When light hits a medium with a high refractive index, the speed of light becomes slower.
So, Tristan is right when he says that, "When light moves from a material in which its speed is high to a material in which its speed is lower, the angle of refraction θ2is less than the angle of incidence θ1and the ray is bent toward the normal."
When moving to a new apartment, you rent a truck and create a ramp with a 244 cm long piece of plywood. The top of the moving ramp lies on the edge of the truck bed at a height of 115 cm. You load your textbooks into a wooden box at the bottom of the ramp (the coefficient of kinetic friction between the box and ramp is = 0.2). Then you and a few friends give the box a quick push and it starts to slide up the ramp. A) What angle is made by the ramp and the ground?B) Unfortunately, after letting go, the box only tables 80cm up the ramp before it starts coming back down! What speed was the box initially traveling with just after you stopped pushing it?
Answer:
A) θ = 28.1º , B) v = 2.47 m / s
Explanation:
A) The angle of the ramp can be found using trigonometry
sin θ = y / L
Φ = sin⁻¹ y / L
θ = sin⁻¹ (115/244)
θ = 28.1º
B) For this pate we can use the relationship between work and kinetic energy
W =ΔK
where the work is
W = -fr x
the negative sign is due to the fact that the friction force closes against the movement
Lavariacion of energy cineta is
ΔEm = ½ m v² - mgh
-fr x = ½ m v² - m gh
the friction force has the equation
fr = very N
at the highest part there is no speed and we take the origin from the lowest part of the ramp
To find the friction force we use Newton's second law. Where one axis is parallel to the ramp and the other is perpendicular
Axis y . perpendicular
N- Wy = 0
cos tea = Wy / W
Wy = W cos treaa
N = mg cos tea
we substitute
- (very mg cos tea) x = ½ m v²2 - mgh
v2 = m (gh- very g cos tea x)
let's calculate
v = Ra (9.8 0.80 - 0.2 9.8 0.0 cos 28.1)
v = RA (7.84 -1.729)
v = 2.47 m / s
5) what is the weight of a
if its weight
is 5N in moon?
body in the earth,
Answer:
Weight of object on moon is 5N ,as we know. Weight of object on moon is 1/3 the of object on earth,so
let weight of object on earth = X
5N= X/3
X = 3×5 = 15N
Hence the weight of the object on earth will
be 15N
To understand the standard formula for a sinusoidal traveling wave.
One formula for a wave with a y displacement (e.g., of a string) traveling in the x direction is
y(x,t)=Asin(kxâÏt).
All the questions in this problem refer to this formula and to the wave it describes.
1) What is the phase Ï(x,t) of the wave?
Express the phase in terms of one or more given variables ( A, k, x, t, and Ï) and any needed constants like Ï
Ï(x,t)=
2) What is the wavelength λ of the wave?
Express the wavelength in terms of one or more given variables ( A, k, x, t, and Ï) and any needed constants like Ï.
λ=
3) What is the period T of this wave?
Express the period in terms of one or more given variables ( A, k, x, t, and Ï) and any needed constants like Ï.
T=
4) What is the speed of propagation v of this wave?
Express the speed of propagation in terms of one or more given variables ( A, k, x, t, and Ï) and any needed constants like Ï.
v=
Answer:
1) Φ=zero
2) λ = 2π / k
3) T = 2π / w
4) v = w / k
Explanation:
The equation of a traveling wave is
y = A sin (ka - wt + Ф)
Let's answer using this equation the different questions
1) we see that the equation given in the problem the phase is zero
2) wavelength
k = 2π /λ
λ = 2π / k
3) The perido
angular velocity is related to frequency
w = 2π f
frequency and period are related
f = 1 / T
w = 2 π / T
T = 2π / w
4) the wave speed is
v = λ f
λ = 2π / k
f = w / 2π
v = 2π /k w /2π
v = w / k
A wheel starts from rest and rotates with constant angular acceleration to reach an angular speed of 12.9 rad/s in 2.98 s.
(a) Find the magnitude of the angular acceleration of the wheel.
(b) Find the angle in radians through which it rotates in this time interval.
Explanation:
(a) Find the magnitude of the angular acceleration of the wheel.
angular acceleration = angular speed /timeangular acceleration = 12.9/2.98 = 4.329rad/s²(b) Find the angle in radians through which it rotates in this time interval.
angular speed = 2x3.14xf12.9rad = 2 x3.14rad = 6.28/12.9rad = 0.487Now we convert rad to angle
1 rad = 57.296°0.487 = unknown angleunknown angle =57.296 x 0.487 = 27.9°The angle in radians = 27.9°
Approximately what applied force is needed to keep the box moving with a constant velocity that is twice as fast as before? Explain
Complete question:
A force F is applied to the block as shown (check attached image). With an applied force of 1.5 N, the block moves with a constant velocity.
Approximately what applied force is needed to keep the box moving with a constant velocity that is twice as fast as before? Explain
Answer:
The applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N
Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the initially applied force.
Explanation:
Given;
magnitude of applied force, F = 1.5 N
Apply Newton's second law of motion;
F = ma
[tex]F = m(\frac{v}{t} )\\\\F = \frac{m}{t} v\\\\Let \ \frac{m}{t} \ be \ constant = k\\F = kv\\\\k = \frac{F}{v} \\\\\frac{F_1}{v_1} = \frac{F_2}{v_2}[/tex]
The applied force needed to keep the box moving with a constant velocity that is twice as fast as before;
[tex]\frac{F_1}{v_1} = \frac{F_2}{v_2} \\\\(v_2 = 2v_1, \ and \ F_1 = 1.5N)\\\\\frac{1.5}{v_1} = \frac{F_2}{2v_1} \\\\1.5 = \frac{F_2}{2}\\\\F_2 = 2*1.5\\\\F_2 = 3 N[/tex]
Therefore, the applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N
Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the applied force.
Which of the following biotic organisms makes its own energy from inorganic substances?
producers
consumers
decomposers
minerals
Answer:
producers make its own energy frominorganic substances.
A ballast is dropped from a stationary hot-air balloon that is at an altitude of 576 ft. Find (a) an expression for the altitude of the ballast after t seconds, (b) the time when it strikes the ground, and (c) its velocity when it strikes the ground. (Disregard air resistance and take ft/sec2.)
Answer:
a) [tex]S = \frac{1}{2}gt^2\\[/tex]b) 6secsc) 192ftExplanation:
If a ball dropped from a stationary hot-air balloon that is at an altitude of 576 ft, an expression for the altitude of the ballast after t seconds can be expressed using the equation of motion;
[tex]S = ut + \frac{1}{2}at^{2}[/tex]
S is the altitude of the ballest
u is the initial velocity
a is the acceleration of the body
t is the time taken to strike the ground
Since the body is dropped from a stationary air balloon, the initial velocity u will be zero i.e u = 0m/s
Also, since the ballast is dropped from a stationary hot-air balloon, the body is under the influence of gravity, the acceleration will become acceleration due to gravity i.e a = +g
Substituting this values into the equation of the motion;
[tex]S = 0 + \frac{1}{2}gt^2\\ S = \frac{1}{2}gt^2\\[/tex]
a) An expression for the altitude of the ballast after t seconds is therefore
[tex]S = \frac{1}{2}gt^2\\[/tex]
b) Given S = 576ft and g = 32ft/s², substituting this into the formula in (a);
[tex]576 = \frac{1}{2}(32)t^2\\\\\\576*2 = 32t^2\\1152 = 32t^2\\t^2 = \frac{1152}{32} \\t^2 = 36\\t = \sqrt{36}\\ t = 6.0secs[/tex]
This means that the ballast strikes the ground after 6secs
c) To get the velocity when it strikes the ground, we will use the equation of motion v = u + gt.
v = 0 + 32(6)
v = 192ft
A passenger jet flies from one airport to another 1,233 miles away in 2.4 h. Find its average speed. = ____ m/s
Speed = (distance) / (time)
Speed = (1,233 mile) / (2.4 hour)
Speed = 513.75 mile/hour
Speed = (513.75 mi/hr) x (1609.344 meter/mi) x (1 hr / 3600 sec)
Speed = (513.75 x 1609.344 / 3600) (mile-meter-hour/hour-mile-second)
Speed = 229.7 meter/second
what is thermodynamic?
Answer:
Thermodynamics is a branch of physics which deals with the energy and work of a system. It was born in the 19th century as scientists were first discovering how to build and operate steam engines. Thermodynamics deals only with the large scale response of a system which we can observe and measure in experiment.
Answer:
thermodynamics is the branch of physics which deals with the study of heat and other forms energy and their mutual relationship(relation ship between them)
Explanation:
i hope this will help you :)
The buoyant force on an object placed in a liquid is (a) always equal to the volume of the liquid displaced. (b) always equal to the weight of the object. (c) always equal to the weight of the liquid displaced. (d) always less than the volume of the liquid displaced.
Answer:
(c) always equal to the weight of the liquid displaced.
Explanation:
Archimedes principle (also called physical law of buoyancy) states that when an object is completely or partially immersed in a fluid (liquid, e.t.c), it experiences an upthrust (or buoyant force) whose magnitude is equal to the weight of the fluid displaced by that object.
Therefore, from this principle the best option is C - always equal to the weight of the liquid displaced.
When you are told that the wind has a "Small Coriolis force" associated with it, what is that "small force" exactly
Answer:
Coriolis force is a type of force of inertia that acts on objects that is in motion within a frame of reference that rotates with respect to an inertial frame. Due to the rotation of the earth, circulating air is deflected result of the Coriolis force, instead of the air circulating between the earth poles and the equator in a straight manner. Because of the effect of the Coriolis force, air movement deflects toward the right in the Northern Hemisphere and toward the left in the Southern Hemisphere, eventually taking a curved path of travel.
The resonance tube used in this experiment produced only one resonance tone. What length of tube would be required to produce a second tone under the same experimental conditions? Explain your answer.
Answer:
the length that would produce a sound tone under the same experimental contditions must be increased by Δl = [tex]\frac{v}{2f}[/tex]
Explanation:
Recall
V = f ×λ
where λ is ⁴/₃l₂ for second resonance
f = [tex]\frac{3v}{4l_{2} }[/tex]
l₂ = [tex]\frac{3v}{4f}[/tex]
where λ is 4l₁ for 1st resonance
f = [tex]\frac{v}{4l_{1} }[/tex]
l₁ = [tex]\frac{v}{4f}[/tex]
∴ Δl = l₂ - l₁ = [tex]\frac{3v}{4f}[/tex] ⁻ [tex]\frac{v}{4f}[/tex]
Δl= [tex]\frac{2v}{4f}[/tex]
Δl = [tex]\frac{v}{2f}[/tex]
Therefore, the length should increase by [tex]\frac{v}{2f}[/tex]
What is the relationship between the magnitudes of the collision forces of two vehicles, if one of them travels at a higher speed?
Explanation:
The collision forces are equal and opposite. Therefore, the magnitudes are equal.
5. Sandor fills a bucket with water and whirls it in a vertical circle to demonstrate that the
water will not spill from the bucket at the top of the loop. If the length of the rope from his
hand to the centre of the bucket is 1.24 m, what is the minimum tension in the rope (at the
top of the swing)? How slow can he swing the bucket? Explain your answer.
Given that,
radius = 1.24 m
According to question,
The rope cannot push outwards. It must always have some slight tension or the bucket will fall.
We need to calculate the tension in the rope
At the top the force of gravity is
[tex]F=mg[/tex]
The force needed to move the bucket in a circle is centripetal force.
So, if mg is ever greater than centripetal force then the bucket and the contents will start to fall.
The rope have a tension of less than zero.
We need to calculate the velocity of swing bucket
Using centripetal force
[tex]F=\dfrac{mv^2}{r}[/tex]
[tex]mg=\dfrac{mv^2}{r}[/tex]
[tex]g=\dfrac{v^2}{r}[/tex]
[tex]v^2=gr[/tex]
[tex]v=\sqrt{gr}[/tex]
Put the value into the formula
[tex]v=\sqrt{9.8\times1.24}[/tex]
[tex]v=3.49\ m/s[/tex]
Hence, The minimum tension in the rope is less than zero .
The bucket swings with the velocity of 3.49 m/s.
When an old LP turntable was revolving at 3313 rpm, it was shut off and uniformly slowed down and stopped in 5.5 seconds. What was the magnitude of its angular acceleration (in rad/s2) as it slowed down?
Answer:
-0.63 rad/s²
Explanation:
Given that
Initial angular velocity of the turntable, w(i) = 33 1/3 rpm
Final angular velocity of the turntable, w(f) = 0 rpm
Time taken to slow down, t = 5.5 s
The calculation is attached in the photo below
A spring hangs vertically. A 250 g mass is attached to the spring and allowed to come to rest. The spring stretches 8 cm as the mass comes to rest. What is the spring constant of the spring
Answer:
spring constant = 31.25N/m
Explanation:
spring constant = force/extension
mass = 250g = 0.25kg
extension = 8cm = 0.08m
force = mg = 0.25 x 10 = 2.5N
spring constant = 2.5/0.08 = 31.25N/m
You illuminate a slit with a width of 77.7 μm with a light of wavelength 721 nm and observe the resulting diffraction pattern on a screen that is situated 2.83 m from the slit. What is the width, in centimeters, of the pattern's central maximum
Answer:
The width is [tex]Z = 0.0424 \ m[/tex]
Explanation:
From the question we are told that
The width of the slit is [tex]d = 77.7 \mu m = 77.7 *10^{-6} \ m[/tex]
The wavelength of the light is [tex]\lambda = 721 \ nm[/tex]
The position of the screen is [tex]D = 2.83 \ m[/tex]
Generally angle at which the first minimum of the interference pattern the light occurs is mathematically represented as
[tex]\theta = sin ^{-1}[\frac{m \lambda}{d} ][/tex]
Where m which is the order of the interference is 1
substituting values
[tex]\theta = sin ^{-1}[\frac{1 *721*10^{-9}}{ 77.7*10^{-6}} ][/tex]
[tex]\theta = 0.5317 ^o[/tex]
Now the width of first minimum of the interference pattern is mathematically evaluated as
[tex]Y = D sin \theta[/tex]
substituting values
[tex]Y = 2.283 * sin (0.5317)[/tex]
[tex]Y = 0.02 12 \ m[/tex]
Now the width of the pattern's central maximum is mathematically evaluated as
[tex]Z = 2 * Y[/tex]
substituting values
[tex]Z = 2 * 0.0212[/tex]
[tex]Z = 0.0424 \ m[/tex]
In a ballistic pendulum experiment, a small marble is fired into a cup attached to the end of a pendulum. If the mass of the marble is 0.0215 kg and the mass of the pendulum is 0.250 kg, how high h will the pendulum swing if the marble has an initial speed of 5.15 m/s? Assume that the mass of the pendulum is concentrated at its end so that linear momentum is conserved during this collision.
Answer:
h = 8.48*10^-3m
Explanation:
In order to calculate the height reached by the pendulum with the marble, you first take into account the momentum conservation law, to calculate the speed of both pendulum and marble just after the collision.
The total momentum of the system before the collision is equal to the total momentum after:
[tex]m_1v_1+m_2v_2=(m_1+m_2)v[/tex] (1)
Here you used the fact that the pendulum has its total mass concentrated at the end of the pendulum.
m1: mass of the marble = 0.0215kg
m2: mass of the pendulum concentrated at its end = 0.250kg
v1: horizontal speed of the arble before the collision = 5.15m/s
v2: horizontal speed of the pendulum before the collision = 0m/s
v: horizontal speed of both marble and pendulum after the collision = ?
You solve the equation (1) for v, and replace the values of the other parameters:
[tex]v=\frac{m_1v_1+m_2v_2}{m_1+m_2}\\\\v=\frac{(0.0215kg)(5.15m/s)+(0.250kg)(0m/s)}{0.0215kg+0.250kg}=0.40\frac{m}{s}[/tex]
Next, you use the energy conservation law. In this case the kinetic energy of both marble and pendulum (just after the collision) is equal to the potential energy of the system when both marble and pendulum reache a height h:
[tex]U=K\\\\(m_1+m_2)gh=\frac{1}{2}(m_1+m_2)v^2\\\\h=\frac{v^2}{2g}[/tex]
v = 0.40m/s
g: gravitational acceleration = 9,8m/s^2
[tex]h=\frac{(0.40m/s)^2}{2(9.8m/s^2)}=8.48*10^{-3}m[/tex]
Then, the height reached by marble and pendulum is 8.48*10^-3m
A heavier car is always safer in a crash than a lighter car.
Answer:
not true because the mass from the heavy car will cause it to damage more
Explanation:
Answer: answer on edmentum is false your welcome
Explanation:
It is false because it's more heavy so more damage l.
The Huka Falls on the Waikato River is one of New Zealand's most visited natural tourist attractions. On average, the river has a flow rate of about 300,000 L/s. At the gorge, the river narrows to 20-m wide and averages 20-m deep.
(a) What is the average speed of the river in the gorge?
(b) What is the average speed of the water in the river downstream of the falls when it widens to 60 m and its depth increases to an average of 40 m?
Answer:
(a) V = 0.75 m/s
(b) V = 0.125 m/s
Explanation:
The speed of the flow of the river can be given by following formula:
V = Q/A
V = Q/w d
where,
V = Speed of Flow of River
Q = Volume Flow Rate of River
w = width of river
d = depth of river
A = Area of Cross-Section of River = w d
(a)
Here,
Q = (300,000 L/s)(0.001 m³/1 L) = 300 m³/s
w = 20 m
d = 20 m
Therefore,
V = (300 m³/s)/(20 m)(20 m)
V = 0.75 m/s
(b)
Here,
Q = (300,000 L/s)(0.001 m³/1 L) = 300 m³/s
w = 60 m
d = 40 m
Therefore,
V = (300 m³/s)/(60 m)(40 m)
V = 0.125 m/s