The diameter of the smallest jovian planet is 3.96 times larger than the diameter of the largest terrestrial planet.
What are the jovian and terrestrial planets?The jovian planets or also called giant gaseous planets are those that are far away in the solar system, which includes Jupiter, Saturn, Uranus, and Neptune, while terrestrial rocky planets include Mercury, Venus, the Earth planet and Mars.
Therefore, with this data, we can see that the jovian and terrestrial planets are different based on the composition of their surfaces and also due to the distance to the Sun.
Learn more about the jovian planets here:
https://brainly.com/question/8892207
#SPJ1
an ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. a higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. at which point does the pipe have the smallest inner diameter?
The pipe at point b will have the least inner diameter based on the supplied statement.
A fluid is what in physics?Any liquid, gas, or substance in general that, while under stress, changes form continuously and is incapable of withstanding tangential or shearing forces.
Briefing:Pipe size and water pressure are related in a moisture pipeline. Because if a pipe's diameter is reduced, the pressure inside the pipeline will rise. According to Bernoulli equation, pressure may be decreased by decreasing the area on conveyance. As a result, there is a high pressure at B and a low diameter at B.
To know more about Fluid visit:
https://brainly.com/question/17123802
#SPJ4
The complete question is-
An ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. At which point does the pipe have the smallest inner diameter? (A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe).
(A). Point a
(B). Point b
(C). Point c
(D). The diameter doesn't change
(E). We can't determine the diameter of the pipe.
Which states of matter are required for energy transfer to occur when radiant energy is the source?.
No state of matter is required for energy transfer to occur when radiant energy is the source.
Which states of matter are required for energy transfer when radiant energy is the source?When radiant energy is the source, it means we are talking about energy transfer by radiation, so matter is not needed for the energy to be transferred.
An example of this is the Sun as it heats up the Earth by radiation, even through the vacuum of outer space, where there is almost no matter.
Radiant energy is used for radiant heating that can be generated electrically by infrared lamps, or can be absorbed from sunlight and is used to heat water.
To know more about radiant energy, refer
https://brainly.com/question/637839
#SPJ4
use newton's method to approximate the zero(s) of the function. continue the iterations until two successive approximations differ by less than 0.001. then find the zero(s) to three decimal places using a graphing utility and compare the results. f(x)
Only one genuine zero exists, and it is found at x = 1.359. newton's method to approximate the zero(s) of the function
The first three decimal places were repeated in the solution after the fourth iteration. I began by assuming that x = 1 was the answer to the Newton's Method formula.
When I entered 1 for x, I received a zero of 5/3.
I entered 5/3 and repeated the process to get 997/687.
I was able to get 1.36976 by plugging in 997/687 and repeating the process.
I entered 1.36976 and repeated the process to get 1.359454.
I entered 1.359454 and repeated the process to get 1.359304.
There was no need to go any further because we are only interested in accuracy to three decimal places.
Learn more about newton here-
https://brainly.com/question/3273157
#SPJ4
when testing the strength of grade a cotton fabric covering an aircraft that requires only intermediate grade, the minimum acceptable strength the fabric must have is
B- 70 percent of the original strength for intermediate fabric.
What is Fabric covering?
Fabrics are adaptable and employed in a wide range of industries, including clothing, agriculture, the military, and obviously the healthcare sector. More than you would imagine, specialty textiles are a part of our daily life. These textiles are generally flame resistant, mould and mildew resistant, and particularly treated with antibacterial properties for the healthcare sector. Why, I presume you ask? Because textiles used often in the medical field need to be antimicrobial and stain resistant from the start, this will help prevent bacteria from growing on the fabric surface.
Learn more about Fabric covering from given link
https://brainly.com/question/23358361
#SPJ4
A 90 g mass is attached to one end of a 10-cm-long spring. The other end of the spring is connected to a frictionless pivot on a frictionless, horizontal surface. Spinning the mass around in a circle at 90 rpm causes the spring to stretch to a length of 12 cm.
The spring constant of the spring is 6.66 N/m.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
The rotational speed of the 90 g = 0.09 kg mass is: ω = 90 rpm
= 90×2π/60 radian/second.
= 3π radian/second.
So centripetal force acting on the spring = mω²r
This causes the spring to stretch to a length of 12 cm = 0.12 m.
Hence, spring constant: k = mω²r/0.12 = 0.09×(3π)²×0.10/0.12 N/m = 6.66 N/m.
Hence, the spring constant of the spring is 6.66 N/m.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
a two-stage rocket moves in space at a constant velocity of 4900 m/s. the two stages are then separated by a small explosive charge placed between them. immediately after the explosion the velocity of the 1200-kg upper stage is 5700 m/s in the same direction as before the explosion. what is the velocity (magnitude and direction) of the 2400-kg lower stage after the explosion?
The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.
=
( + )( ⁄) − ( )( ⁄)/
=
. / − . //
= . / /
=. / / = /s
Since this is positive the lower stage is moving in the same direction as the upper stage and both are in the same as the original direction.
Therefore, The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.
To know more about momentum, check out:
https://brainly.com/question/1042017
#SPJ4
a jeweler is wearing a 20 d magnifying lens directly in front of his eye. if his near point is a typical 25 cm, how close can he hold a gem that he is inspecting?
If his near point is a typical 25cm, he must hold the gem that he is inspecting at 4.17cm in front of the magnifying lens that the jeweler is wearing.
What is magnifying lens (magnifying glass)?It is a convex lens that is used to produce a magnified image of an object. The lens is usually mounted in a frame with a handle or wear it like an eyeglasses in front of our eye.
How to calculate, how close can he hold a gem that he is inspecting?
First, let's calculate the focal length of the lens.
f = 1 / P
= 1 / 20D
= 0.05m * ( 10^2 cm / 1m)
= 5cm
Convex lens will create a virtual image of a nearby object. Therefore, the image distance is taken as negative, di = -25cm
The position where the gem can be held is calculated with this formula :
1 / f = 1 / do + 1 / di
1 / do = 1 / f - 1 / di
= (1 / 5cm) - (1 / -25cm)
do = 4.17cm
Therefore, the jeweler needs to hold the gem at 4.17cm.
Learn more about magnifying lens (magnifying glass) https://brainly.com/question/9896908
#SPJ4
g a projectile is shot directly away from earth's surface. neglect the rotation of the earth. what multiple of earth's radius gives the radial distance the projectile reaches if its initial speed is 0.745 of the escape
The multiple of earth's radius which gives the radial distance is 4/3 or 1.33.
Initial speed = 0.745
However,
We know that escape velocity = V = √ (GM/2Rₓ)
So, using the property of energy conservation,
= (1/2)mv² - GMm/2Rₓ
= - GMm/r
The escape velocity, in astronomy and space exploration, is the velocity needed for a body to escape from a gravitational centre of attraction without undergoing any further acceleration. It is the minimum velocity required by a body to be projected to overcome the gravitational pull of the earth.
Thus,
= r = 4Rₓ / 3
Hence the multiple of Rₓ is 4/3 or 1.33.
To know more about Escape Velocity:
https://brainly.com/question/15521112
#SPJ4
in an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:
In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when: A. The block passes over the equilibrium point.
What is kinetic energy?In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).
This ultimately implies that, a physical object or body would gain more of kinetic energy as it falls back toward the Earth because it is in motion.
In an experiment that is based on an oscillator using both a spring and a block, the amount of kinetic energy that is possessed by the block would reach maximum when it passes over the equilibrium point.
Read more on kinetic energy here: brainly.com/question/1242059
#SPJ1
Complete Question:
In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:
The block passes over the equilibrium point.
The block is at maximum positive displacement from the equilibrium point.
The spring's extension is half of the amplitude of oscillation.
The spring is at maximum compression.
None of these.
an object is traveling with a constant velocity with no unbalanced forces acting upon it. what do we expect this object to do?
While changing direction, the object will continue to move at the same speed.
What are velocity and speed?In way of comparison to kinetic energy, which defines the course and speed of an object's moving, velocity is the amount of mobility along one journey. Alternatively, velocity is a vector and speed is a scalar quantity.
Exactly why is velocity measured?The rate and direction of motion are measured by a vector known as velocity. The speed that something moves in one direction is known as its velocity. Velocity can be used to gauge both the speed of an oncoming car on a busy freeway and the speed of a rocket being launched into space.
To know more about Velocity visit:
https://brainly.com/question/28738284
#SPJ4
in Section 24-2. you learned how Neptune is afferent from Uranus, and how its rings and moons fomed and evolved Based on what you leamed about Uranus select all of the correct statements from the following list Neptune is similar to Uranus as far as sze, mass, composition and interior structure Lke Uranus, Neptune shows very little atmospheric activity Neptune's largestmoon Triton, has a retrograde orbit which suggests that it was captured i Beng much farther from the sun. Nepture has less internal heat than Uranus Triton has a tin atmosphere and may be geologically active Lke Uranus. Neptune's solid core prevented from having a magnetic field Neptune's position was predicted before it was discovered
Neptune and Uranus are similar in terms of size, mass, composition, and internal structure. The largest moon of Neptune, Triton, appears to have been captured because of its retrograde orbit.
Triton has a thin atmosphere and could be experiencing geological activity. Neptune's location was anticipated before it was ever discovered. Neptune is one of just two ice giants in the outer solar system (the other is Uranus). The planet's bulk, which is composed of a hot, dense fluid floating atop a tiny, rocky core, is primarily made up of water, methane, and ammonia (80% or more). Uranus is Neptune's identical twin. Their mass and chemical contents are equivalent. They are composed of an exterior layer of rocks and a mantle that is a mixture of water, ammonia, and methane ices.
Therefore, a physical body's mass is its total amount of matter. Inertia, or the body's resistance to acceleration (change of velocity) when a net force is applied, is also measured by this property. The gravitational pull an object has on other bodies is also influenced by its mass. The kilograms is the fundamental mass unit of SI (kg).
Learn more about mass here: brainly.com/question/18064917
#SPJ4
a ground wire is an essential component for a circuit breaker. please select the best answer from the choices provided t f
It is false to say that a ground wire is an essential component for a circuit breaker. So, given statement is false.
The reason for why it is off-base on the grounds is that the seriousness of an electric shock relies upon how much flow streaming in it, not on the sort of material by which it is made. An electrical switch is an electrical wellbeing gadget intended to shield an electrical circuit from harm brought about by an overcurrent or cut off. Its essential capability is to hinder current stream to safeguard hardware and to forestall the gamble of fire.
Dissimilar to a wire, which works once and afterward should be supplanted, an electrical switch can be reset (either physically or naturally) to continue typical activity.
Circuit breakers are made in changing sizes, from little gadgets that safeguard low-current circuits or individual domestic devices, to huge switchgear intended to safeguard high voltage circuits taking care of a whole city. The conventional capability of an electrical switch, or circuit, as a programmed method for eliminating power from a broken framework, is frequently truncated as OCPD (Over Flow Insurance Gadget).
Hence, given statement is false.
To know more about Circuit breakers, visit here:
https://brainly.com/question/17040163
#SPJ4
a crew of scientsits has b uilt a new space station the space station is shaped lke a wheel of radius r with esssentially all its mass m at the irm. When the crew arrives. The Station will be set roteting at a rate that causes an object at the rim to have radial acceleration g, thereby simulatitng Earth's surface gravity. This is accomplished by
The required time need to fire the rockets to achieve the desired condition is by the relationship of centripetal acceleration by angular acceleration and angular velocity, t = [tex]\sqrt{gR}\frac{M}{2T}[/tex]
What is Centripetal Acceleration?
Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center. In your daily existence, you must have encountered numerous instances of centripetal acceleration. A centripetal acceleration occurs when you drive in a circle, and a centripetal acceleration also occurs when a satellite orbits the Earth. Centripetal refers to being in the middle.
Radius of the spaceship in the form of a wheel = R
Mass of the spaceship concentrated at its rim = M
Radial acceleration of any object placed on the spaceship = g
Thrust exerted by the rocket = T
Time needed to fire the rockets = t
I understand the question you are looking for
"A crew of scientists has built a new space station. The space station is shaped like a wheel of radius R with essentially all its mass M at the rim. When the crew arrives the station will be set rotating at a rate that causes an object at the rim to have radial acceleration g thereby simulating Earth's surface gravity. This is accomplished by two small rockets each with thrust T newtons mounted on the station's rim. How long a time t does one need to fire the rockets to achieve the desired condition?"
To know more Centripetal Acceleration check out:
https://brainly.com/question/14465119
#SPJ4
in sec. 10.6 of the experiment, your ear simultaneously hears waves from different sources, so it can hear beats from the two speakers. suppose one speaker is driven at 590 hz and the other at 560 hz. what is the beat frequency (in hz)?
It can hear the two speakers' beats because of the frequency of 30 Hz. Consider driving one speaker at 590 Hz and another at 560 Hz.
Why not offer an example of frequency?The quantity of observations that take place during a specific predetermined timeframe is the frequency of the a class interval. Therefore, if 20 individuals between the ages of 5 and 9 are found in the data from our study, the frequency again for 5–9 age range is 20.
What is the purpose of frequency?The temporal rate of evolution seen in oscillatory & periodic events, such as vibrations, speech recordings (sound), radio frequencies, and light, is specified by the frequency, an essential parameter in science and engineering.
Briefing:Beat frequency f = f₂ - f₁
F₂ = 590 Hz
F₁ = 560 Hz
f = 590 - 560
f = 30 Hz
To know more about frequency visit:
https://brainly.com/question/17196899
#SPJ4
(a) what is the period of small-angle oscillations of a simple pendulum with a mass of 0.6 kg at the end of a string of length 5 m?
Answer:
T = 2 π (L / g)^1/2
T = 6.28 (5 m / 9.80 m/s^2)^1/2
T = 4.49 sec (the period is not dependent on mass)
Nuclear decay occurs according to first-order kinetics. What is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes?.
The half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes is 3.5 minutes.
Rate of first order reaction is given by:[tex]kt = 2.303 * log(R'/R)[/tex]
Where , k = rate of reaction
t= time = 2.5 minutes
R= final amount = 31.7g
R'= initial amount = 55.4g
Putting these values in above equation we get k = 0.22
Now half life of a first order reaction is given by: 0.693/k
Putting k= 0.22 , we get half life = 3.5 minutes.
So the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes is 3.5 minutes.
To know more about radioactivity visit:
https://brainly.com/question/20039004
#SPJ4
How can friends, family members, or teammates
increase the likelihood of you reaching your goals?
Radio waves travel through empty space
-faster than visible light.
-slower than visible light.
-at the speed of visible light.
-with only electric fields and not magnetic fields.
Compared to visible light, radio waves are less energetic and move more slowly.
The speed of light, which is roughly 186,000 miles per second, is what radio waves move at. In other words, light may go farther than the entire globe in the same amount of time that radio waves take to cover the distance of a football field. The speed and energy of radio waves would be slower than those of visible light. Compared to radio waves, visible light would have a shorter wavelength and lesser energy. The speed of radio waves and the speed of light in the visible spectrum are identical. In a vacuum, they both move at a speed of 3 108 3 10 8 metres per second. The visible light that our eyes detect is electromagnetic radiation of this kind. The researchers claim that they can make the wave travel faster than the speed of light by carefully adjusting the frequency of the voltage and the phase displacement. The fastest rate of charge transmission, however, is slower than the speed of light.
To learn more about energetic please click on below link
https://brainly.com/question/15597525
#SPJ4
how much work must denise do to drag her basket of laundry of mass 8.0 kg a distance of 6.0 m along a floor, if the force she exerts is a constant 30.0 n at an angle of 60o with the horizontal?
90 J work must Denise do to drag her basket of laundry of mass 8.0 kg a distance of 6.0 m along a floor if the force she exerts is a constant 30.0 N at an angle of [tex]60^0[/tex] with the horizontal.
It is given that,
Mass of the basket = 8.0 Kg.
Distance from where it needs to be dragged = 6.0 m
Constant force = 30.0 N = F
Value of angle = [tex]\theta[/tex]= [tex]60^\circ[/tex]
As we know, the value of work done can be determined by using the formula:
[tex]w=\mathrm{Fscos}(\theta)[/tex]
So, putting the value of F, s and value of angle in above formula:
We will get, the value of work done as:
[tex]\mathrm{w}=30 \times 6 \times \cos (60) \\& =180 \times \frac{1}{2} \\& =90 \text { joule }[/tex]
For more such question on Work:
https://brainly.com/question/25573309
#SPJ4
a light ray reflects from a surface. if the angle of incidence is 24°, what is the angle that the reflected ray makes with the surface? 
Since the angle of incidence and reflection are equal (90° - 24° = 66°), the angle that perhaps the reflected beam forms with the surface is 66°.
What is the science's perspective?If two lines meet at a common point, an angle is created. A right angle is one that is 90 degrees, and they can be found within every corner of a square. Angles that are wider are said to as obtuse and those that are more acute.
In physics, how is a plane angle?As illustrated below, the size of the circle that the arcs at two points subtend and its arc length together define the angle, or, that is formed when the lines from those two points meet at the circle's vertex.
To know more about Angle visit:
https://brainly.com/question/26700114
#SPJ4
A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens)
A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens).
e. -0.25 dB (top lens); +2.3 dB (bottom lens)
docs of optometry (O.D.s/optometrists), the usa's number one eye health care carriers, are the frontline of eye and vision care. doctors of optometry are essential fitness care companies and are diagnosed as physicians underneath Medicare. They study, diagnose, treat and control illnesses and issues of the attention.
Learn more about optometrist here:-
brainly.com/question/7454688
#SPJ4
A slate falls from the roof of a height-rise building. Find how far it falls
a. In the first second
b. In the first two seconds
c. During the third second
In the first second, a slate drops from the roof of a tall building.
Explain about the seconds?Second is the standard unit of time in the International System of Units (SI) (s or sec). In decimal form, one cycle of radiation, or 9,192,631,770 (9.192631770 x 109), is equal to one second. This radiation is produced as the cesium-133 atom moves between two levels.
The symbol for a second, or s, is used to denote SI time. It is described as the fixed numerical value of the cesium frequency, vCs, which is the unaltered ground-state hyperfine transition frequency of the cesium 133 atom. The unit Hz, which is equivalent to s-1, is used to express this frequency. The second is the unit of time measurement.
To learn more about seconds refer to:
https://brainly.com/question/26524032
#SPJ1
a particle is moving with a constant velocity in the x-direction. when the particle reaches the origin, a constant force is exerted on it in the y-direction. which of the following graphs best shows the path the particle will follow?
Parabolic Up. Since the force is in the y-direction, the particle will continue to move at a constant speed in the x-direction and accelerate in the y-direction. This creates a parabolic path around y-axis.
Force is the power that changes the motion of an item. A force can purpose an object with mass to alternate its pace. Pressure also can be described intuitively as a push or a pull. A force has both value and path, making it a vector quantity.
Pressure is a push or a pull and it affects us in our daily lives because, without force, people might not be capable of open and near stuff or lifting up their arms or legs.
Variety of Forces :
* Muscular Forces, muscular tissues feature to produce an ensuing force which is referred to as 'muscular force'.
* Frictional Forces, while an item modifications its national motion, 'frictional pressure' acts upon it.
* Carried out pressure.
* Tension force.
* Spring force.
* Gravitational pressure.
Learn more about Force here:-https://brainly.com/question/12785175
#SPJ4
in a series circuit with three bulbs, adding another bulb will a. make the nearest bulb brighter. b. make some of the bulbs dimmer. c. make all the bulbs brighter. d. make all the bulbs dimmer. please select the best answer from the choices provided a b c d
The addition of a fourth bulb will cause some of the three lights in a series circuit to become dim.
What does an electrical bulb do?A wire filament is used in an electronic bulb, a compact and basic light source that emits light when power is applied. The illustration below shows the incandescent light bulb's construction. Three essential components make up the light bulb. the thread. glass lightbulb
Is a light a bulb?An electrical device that generates light is known as an electric light, lamp, or lightbulb. The most prevalent type of artificial illumination is this. A lamp's base, which is often composed of ceramic, metal, glass, or plastic, attaches it in the socket of such a lighting system, which is also frequently referred to as a "lamp."
To know more about Bulb visit:
https://brainly.com/question/29668994
#SPJ4
if electromagnetic radiation a has a lower frequency than electromagnetic radiation b, then compared to b, the wavelength of a is:____.
a flat, circular loop has 17 turns. the radius of the loop is 11.0 cm and the current through the wire is 0.58 a. determine the magnitude of the magnetic field at the center of the loop (in t).
The magnitude of the magnetic field at the center of the loop 6.28 × 10⁻⁵ T.
A magnetic field is a vector subject that describes the magnetic effect on moving electric charges, electric currents, and magnetic materials. A transferring price in a magnetic area stories a pressure perpendicular to its very own pace and to the magnetic discipline.
calculation:-
Given;
Number of turns n = 17 turns
radius = 11 cm = 0.11m
current i = 0.58 A
Magnetic field at the centre of the loop is
B = μ₀nI//2r
B = 4π × 10⁻⁷ × 17 × 0.58 / 2× 0.11
= 628.4 × 10⁻⁷ T
= 6.28 × 10⁻⁵ T
A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric-powered currents, and magnetic substances. A transferring rate in a magnetic field story a pressure perpendicular to its own velocity and to the magnetic area.
The magnetic field is the place around a magnet wherein the impact of magnetism is felt. We use the magnetic discipline as a tool to explain how the magnetic force is shipped in the area around and inside something magnetic in nature.
Learn more about the magnetic field here:-https://brainly.com/question/9719792
#SPJ4
two pool balls, each moving at 2 m/s, roll toward each other and collide. suppose after bouncing apart, each moves at 2 m/s. assume the positive direction is to the right. this collision violates conservation of a. kinetic energy b. momentum c. both kinetic and momentum d. none of the above
Answer:
(D) From what has been given
For a linear elastic collision the speed of separation equals the speed of approach - if the relative speed of approach was 4 m/s, the relative speed of separation will be 4 m/s - both KE and momentum are considered conserved
go to the exploring waves discussion and post an answer to this question: waves are used in many practical applications to support work, entertainment, and health. one example is the use of ultrasound imaging to safely track the development of a growing fetus. what is a specific example of a practical application of waves in medicine, entertainment, safety, or other fields? provide a brief explanation of how the properties of waves are useful to that application. in your explanation, make sure you use at least four of the terms about waves introduced in this lesson. respond to at least one other person and explain why you agree or disagree with their comment. make a copy of your discussion post and response, and paste these items into 06.02 exploring waves discussion assessment.
A specific example of a practical application of waves in medicine is the capturing of body structures to detect abnormalities in them.
Abnormality is the giant deviation from normally usual patterns of conduct, emotion, or notion, same time as normality is the absence of illness and the presence of a country of nicely being otherwise referred to as normalcy. It may be hard to attract the line between regular and strange behaviors, specifically in management.
Abnormality consists of 3 extraordinary classes; they're subnormal, supernormal, and paranormal. The technology of unusual psychology studies two types of behaviors: adaptive and maladaptive behaviors.
Apart from genes, similarly, organic elements that contribute effectively to the abnormality of 1's behavior are neurotransmitters and hormones. Imbalance in neurotransmitters like GABA, norepinephrine, and many others., causes unusual neural plasticity or mental dysfunction.
Learn more about Abnormality here:-https://brainly.com/question/23694513
#SPJ4
A mover is trying to lift a piano (slowly) up to a second-story apartment. He use a pulley and ropes to decrease the force needed to raise a heavy load (Figure 1) Figure 1 of 1 B mg Part A But for every meter the load is raised, how much rope must be pulled up? Account for this, using energy concepts O For each meter of the load is raised, 2 m of rope must be pulled up. O For each meter of the load is raised, 2.5 m of rope must be pulled up For each meter of the load is raised, 1.5 m of rope must be pulled up. O For each meter of the load is raised, 0.5 m of rope must be pulled up. Submit Request Answer Provide Feedback
Two metres of rope must be raised in order to move the burden every metre.
Explain why two metres of rope should be raised.
Assuming no dissipative forces are at work over the rope.
The effort is used to draw upward on the rope's free end while the load is hung from the pulley block. The effort required is just half the amount of the load because the load is now suspended from two ropes, each of which is bearing half of the weight.
Hence, two metres of rope must be raised in order to move the burden every metre.
To learn more about forces, follow the link:
https://brainly.com/question/29676926
#SPJ4
a 2800. kg rollercoaster is traveling at 18.5 m/s along its track. what is the largest radius loop (in m) that the coaster could successfully go around at that speed?
The Radius loop of 34.88m that coaster could go around with speed of 18.5m/s.
Mass of rollercoaster =2800kg
Speed is 18.5m/s
On a roller coaster, the so-called clothoid loops are the most obvious place where centripetal acceleration takes place. A spiral segment with a variable radius is called a clothoid. The radius at the bottom of a clothoid loop is significantly larger than the radius at the top, in contrast to a circular loop where the radius is a constant value.A clothoid's curvature is less at the bottom of the loop than it is at the top. We will characterize a clothoid loop as being made up of a number of circular sections that overlap or are adjacent to one another in order to simplify our analysis of the physics of clothoid loops.[tex]V=\sqrt{gR}\\ \\V=speed=18.5m/s\\\\g=gravity=9.81m/s^2\\\\R=radius[/tex]
Calculation- squaring both sides of equation.
[tex]V^2=gR\\\\R=V^2/g\\\\R=18.5^2/9.81\\\\R=342.25/9.81\\\\R=34.88m[/tex]
To study more about centripetal acceleration -
https://brainly.com/question/14465119
#SPJ4