Answer:
This question is incomplete
Explanation:
The question is incomplete. However, to determine the time (in seconds) it took a worker to hit the ground from an elevated point. The speed the worker was coming with to the ground and the distance between the elevated point and the ground will have to be considered. Thus the formula to be used here will be
Speed (in meter per second) = distance (in meters) ÷ time (in seconds)
time (in seconds) = distance (in meters) ÷ speed (in meter per seconds)
An automobile traveling 88.0 km/h has tires of 72.0 cm diameter. (a) What is the angular speed of the tires about their axles
Answer:
angular speed = 67.91 rad/s
Explanation:
Given that,
The diameter of a tire, d = 72 cm
The radius of a tire, r = 36 cm = 0.36 m
Linear speed of an automobile, v = 88 km/h = 24.45 m/s
We need to find the angular speed of the tires about their axles. The relation between angular speed and angular speed is given by :
[tex]v=r\omega\\\\\omega=\dfrac{v}{r}\\\\\omega=\dfrac{24.45 }{0.36}\\\\\omega=67.91\ rad/s[/tex]
So, the angular speed of the tire is 67.91 rad/s.
What do you do abt onion eyes (MY EYES ARE BURNING BADDD)
Answer:
Leave onions in cold water for about 15 minutes! Takes out the chemical reaction in the onion's defense system.
Explanation:
This is what people NEED to know for cooking... Lol :)
Two balls collide in a head-on elastic collision and rebound in opposite directions. One ball has velocity 1.2 m/s before the collision, and −2.3 m/s after. The other ball has a mass of 1.1 kg and a velocity of −4.2 m/s before the collision. (a) What is the mass of the first ball? (b) What is the velocity of the second ball after the collision?
Answer:
If two particles are involved in an elastic collision, the velocity of the second particle after collision can be expressed as: v2f=2⋅m1(m2+m1)v1i+(m2−m1)(m2+m1)v2i v 2 f = 2 ⋅ m 1 ( m 2 + m 1 ) v 1 i + ( m 2 − m 1 ) ( m 2 + m 1 ) v 2 i .
Explanation:
Mark me as brainliest and follow me
PLEASE PROVIDE AN EXPLANATION.
THANKS!!!
Answer:
(a) A = 0.0800 m, λ = 20.9 m, f = 11.9 Hz
(b) 250 m/s
(c) 1250 N
(d) Positive x-direction
(e) 6.00 m/s
(f) 0.0365 m
Explanation:
(a) The standard form of the wave is:
y = A cos ((2πf) t ± (2π/λ) x)
where A is the amplitude, f is the frequency, and λ is the wavelength.
If the x term has a positive coefficient, the wave moves to the left.
If the x term has a negative coefficient, the wave moves to the right.
Therefore:
A = 0.0800 m
2π/λ = 0.300 m⁻¹
λ = 20.9 m
2πf = 75.0 rad/s
f = 11.9 Hz
(b) Velocity is wavelength times frequency.
v = λf
v = (20.9 m) (11.9 Hz)
v = 250 m/s
(c) The tension is:
T = v²ρ
where ρ is the mass per unit length.
T = (250 m/s)² (0.0200 kg/m)
T = 1250 N
(d) The x term has a negative coefficient, so the wave moves to the right (positive x-direction).
(e) The maximum transverse speed is Aω.
(0.0800 m) (75.0 rad/s)
6.00 m/s
(f) Plug in the values and find y.
y = (0.0800 m) cos((75.0 rad/s) (2.00 s) − (0.300 m⁻¹) (1.00 m))
y = 0.0365 m
Doing specific exercises to improve a particular skill or type of health fitness is called training? True or false
If a car is able to accelerate a 500kg truck at 50m/s^2 what is the force applied by the engine on the car? Please show work
Answer:
The answer is 25,000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 500 × 50
We have the final answer as
25,000 NHope this helps you
Answer:
Force applied by the engine on the car = 25 kN
Explanation:
Mass (m) = 500 kg
Acceleration (a) = 50 m/s²
The force (F) is equated to the product of the mass times the acceleration.
[tex] \boxed{ \bf{F = ma}}[/tex]
By substituting values, we get:
[tex] \longrightarrow [/tex] F = 500 × 50
[tex] \longrightarrow [/tex] F = 25000 N
[tex] \longrightarrow [/tex] F = 25 kN
One atomic mass unit is defined as 1.66 x 10^-27 kg. If a proton has a mass of one atomic mass unit and a density of approximately 5.8 x 10^27 kg/m3^ . What is the diameter of a proton if we assume it is a sphere?
Answer:
The diameter is [tex]d = 8.18*10^{-19} \ m[/tex]
Explanation:
From the question we are told that
The value of one atomic mass unit is [tex]u = 1.66 *10^{-27} \ kg[/tex]
The density of the proton is [tex]\rho = 5.8 *10^{27} \ kg/m^3[/tex]
Generally the volume of the proton (sphere)is mathematically represented as
[tex]V = \frac{4}{3} * \pi * r^3[/tex]
Generally this volume can also be evaluated as
[tex]V = \frac{u}{\rho}[/tex]
=> [tex]V = \frac{1.66 *10^{-27}}{5.8*10^{27}}[/tex]
=> [tex]V = 2.862 *10^{-55} \ m^3[/tex]
So
[tex]2.862 *10^{-55} = \frac{4}{3} * 3.142 * r^3[/tex]
=> [tex]r^3 = 6.832 *10^{-56}[/tex]
=> [tex]r = 4.088 *10^{-19} \ m[/tex]
Now the diameter is mathematically represented as
[tex]d = 2 * r[/tex]
=> [tex]d = 2 * 4.088 *10^{-19}[/tex]
=> [tex]d = 8.18*10^{-19} \ m[/tex]
Which state of matter does this model represent?
Image of particles tightly packed
Solid
Liquid
Gas
Plasma
Answer:
gas
Explanation:
it is gas because the particles are floating up none of the above would be floating up.
Answer:
Solid
Explanation:
A: Solid- Solids have the particles tightly packed. They have a definite shape and volume
B: Liquid- Liquids have particles not to tightly packed but kind of loose. They have an indefinite shape but a definite volume
C: Gas- Gas has particles freely all around. Indefinite shape and volume
D: Plasma- Plasma is different and should be explained with an example; think of lighting....
Since the image shows tightly packed particles, it is clear the answer is a solid.
You perform an experiment to test how far a cannon will shoot a performer at
different angles. The data are shown below.
Angle
Distance (feet)
30°
110
34°
120
38°
128
42°
133
46°
127
50°
119
54°
109
At which angle will the performer travel the shortest distance?
A. 44°
B. 54
Ο Ο Ο Ο
C. 32
D. 50°
Answer:
128
Explanation:
Answer:
54 degrees
Explanation:
NEED HELP ASP
WILL GIVE POINTS OR WHATEVER
Answer:
you need to multiply the momentum and the mass
Describe the difference between simply taking measurements and doing a scientific experiment.
In 2-3 sentences
A student made a model of an onion skin cell she viewed using a microscope. The scale is 500:1. The student's cell model has a length of 15 cm. How many centimeters is the cells length
I feel like I'm in a city
Answer:
0.03 cm
Explanation: If the scale is 500:1, you have to divide 500 by 15 to get 0.03. You do not multiply 500 times 15 because the cells are smaller than the scale representation so you divide.
The rotational inertia of a thin rod about one end is 1/3 ML2. What is the rotational inertia of the same rod about a point located 0.40 L from the end
Answer:
The value is [tex]I = 0.0932 ML ^2[/tex]
Explanation:
From the question we are told that
The rotational inertia about one end is [tex]I_R = \frac{1}{3} ML^2[/tex]
The location of the axis of rotation considered is [tex]d = 0.4 L[/tex]
Generally the mass of the portion of the rod from the axis of rotation considered to the end of the rod is [tex]0.4 M[/tex]
Generally the length of the rod from the its beginning to the axis of rotation consider is
[tex]k = 1 - 0.4 L = 0.6L[/tex]
Generally the mass of the portion of the rod from the its beginning to the axis of rotation consider is
[tex]m = 1- 0.4 M = 0.6 M[/tex]
Generally the rotational inertia about the axis of rotation consider for the first portion of the rod is
[tex]I_{R1} = \frac{1}{3} (0.6 M )(0.6L)^2[/tex]
[tex]I_{R1} = \frac{1}{3} (0.6 M )L^2 0.6^2[/tex]
Generally the rotational inertia about the axis of rotation consider for the second portion of the rod is
[tex]I_{R2} = \frac{1}{3} (0.6 M )(0.6L)^2[/tex]
=> [tex]I_{R2} = \frac{1}{3} (0.4 M )(0.4L)^2[/tex]
=> [tex]I_{R2} = \frac{1}{3} (0.4 M )L^2 0.4^2[/tex]
Generally by the principle of superposition that rotational inertia of the rod at the considered axis of rotation is
[tex]I = \frac{1}{3} (0.6 M )L^2 0.6^2 + \frac{1}{3} (0.4 M )L^2 0.4^2[/tex]
=> [tex]I = \frac{1}{3} ML ^2 [0.6 * (0.6)^2 + 0.4 * (0.4)^2 ][/tex]
=> [tex]I = 0.0932 ML ^2[/tex]
a steel is 40cm long at 20c.the coefficient of linear expansivity for steel is 0.000012.find the increase in length at 70C
Answer:
janakajnakanabjjiaj yav good day for you to everyone else to do with my family is it just doesn't want me and I am
An arrow in a bow has 357 J of elastic potential energy How much Winette enere
Will the arrow have after it has been shot assuming there is no sir restoran
Answer:
357 J
Explanation:
The elastic potential energy of arrow in the stretched bow is 357 J.
The kinetic energy of the arrow after it has been shot is given by half of the product of the arrow's mass and velocity of the arrow.
Here there are no other forms of energy at play here. Only potential and kinetic energy.
As we know that in any system the energy is conserved accordingly the elastic potential energy of the arrow will be equal to the kinetic energy of the bow after it is released i.e., 357 J.
MULTIPLE CHOICE
Newton’s first law of motion is also known as the law of ______ while the Newton’s 2nd law of motion is known as the law of _____ and Newton’s third law is also known as the law of ______
Answer:
1st law known as low of inertial
2nd law of acelaration and force relationship
3rd law of action and reaction
What kind of food would you expect a turtle with a hard, sharp beak and short neck to eat?
YOUR IN THE RUNNING
OF CLAIMING
YER NEXT
B R A I N L I E S T
Which statement best explains why two flowers of the same species have different colored petals?:
A. exposure to sunlight
B. expression of an inherited trait
C. expression of an acquired trait
D. photosynthesis
You will get brainliest just for trying because i could use the help.
Answer:
B
Explanation:
it could be because they have a difference in genes
Why are continental rocks much older than oceanic crust?
A. Oceanic crust is continually recycled through convection in the earth's mantle
B. Oceanic crust is made out of much less dense material than continental crust
C. Continental crust is continually renewed through convection in the earth's mantle
D. Continental crust eats oceanic crust for breakfast
Answer:
A. Oceanic crust is continually recycled through convection in the earth's mantle
Explanation:
The oceanic plate is constantly being recycled through the forces of convection within the earth's mantle.
New oceanic plate are formed mid-oceanic ridge for example. As the magma cools and solidifies, they are moved away continually.
This is not the case for the continental curst.
If you can answer my last post ill give you 75 points pls its very important and please make sure it correct!!!!!!!
Answer:
I can't see the post :/
Explanation:
Answer:
ok
Explanation:
ok how many points is this?????
What is the difference in
momentum between a 0.216 kg bird
flying 5.87 m/s and a 7.29 kg baby
crawling 0.234 m/s?
Answer:
0.438kg/ms-¹
Explanation:
Momentum, denoted by p, can be calculated by using the formula;
p = mv
Where;
m = mass (kg)
v = velocity (m/s)
Momentum (p) of bird = 0.216 kg × 5.87 m/s = 1.268kg/ms-¹
Momentum (p) of crawling baby = 7.29 kg kg × 0.234 m/s = 1.706kg/ms-¹
Having calculated the momentum of the bird to be 1.268kg/ms-¹, and the momentum of the baby to be 1.706kg/ms-¹, the difference in momentum between the flying bird and the crawling baby is:
{1.706kg/ms-¹ - 1.268kg/ms-¹} = 0.438kg/ms-¹
PLS HURRY!!!! 15 PTS!!! The pictures represent three different states of matter.
Which order of pictures places molecules with the most
amount of motion to the least amount of motion?
O X Y Z
O ZYX
O Y Z
O Y - X - Z
A 1400 kg car traveling in the positive direction takes 11.0 seconds to slow from 25.0 meters per second to 12.0 meters per second. What is the average force on the car during this time?
Answer:
–1652 N. The negative sign indicate that the force is in opposite direction to car.
Explanation:
The following data were obtained from the question:
Mass (m) of car = 1400 kg
Time (t) = 11 s
Initial velocity (u) = 25 m/s
Final velocity (v) = 12 m/s
Force (F) applied on the car =?
Next, we shall determine the acceleration of the car. This can be obtained as follow:
Time (t) = 11 s
Initial velocity (u) = 25 m/s
Final velocity (v) = 12 m/s
Acceleration (a) =?
a = (v – u) /t
a = (12 – 25) /11
a = –13/11
a = –1.18 m/s²
Finally, we shall determine the force on the car as follow:
Acceleration (a) = –1.18 m/s²
Mass (m) of car = 1400 kg
Force (F) applied on the car =?
F = ma
F = 1400 × –1.18
F = –1652 N
Thus, the force on the car is –1652 N. The negative sign indicate that the force is in opposite direction to car.
A piece of wood from a nearby construction site floats near the shore of a lake. It floats in very calm water with half of its volume just above the surface. What is the density of this piece of wood
Answer:
Explanation:
The density of a substance can be described as the mass per volume of the substance. The density of the piece of wood described in the question can be calculated as the mass of the wood divided by the volume of the water the wood displaced (which was referred to in the question as making half of the wood's volume i.e half of the thickness of the wood was in the water).
When scientists make models of dynamic physical events, they will normally choose to have values that may change as time progresses. What are these values called?
boundary conditions
initial conditions
outputs
gravity
Answer:
1. Initial conditions
2. The speed of a character at the moment of contact
3. The hardness of the sidewalk where the mug landed
4. The location where potential energy is zero
5. Aerodynamic properties
Explanation:
100%
The values that may change over time in a model are called initial conditions.
Scientists use models to represent actual conditions. A model is always a representation of real life situations and are very useful for explanatory and predictive purposes.
When scientists make models of dynamic physical events, they will normally choose to have values that may change as time progresses. These values are called initial conditions.
Learn more: https://brainly.com/question/8646601
Suppose that the space shuttle Columbia accelerates at 14.0 m/s2 for 8.50 minutes after takeoff.
A. What will be the speed of the shuttle at the end of 8.50 minutes?
B. How far will the shuttle have traveled during this time?
Answer:
A. speed = 7.14 Km/s
B. distance = 1820.7 Km
Explanation:
Given that: a = 14.0 m/[tex]s^{2}[/tex], t = 8.50 minutes.
But,
t = 8.50 = 8.50 x 60
= 510 seconds
A. By applying the first equation of motion, the speed of the shuttle at the end of 8.50 minutes can be determined by;
v = u + at
where: v is the final velocity, u is the initial velocity, a is the acceleration and t is the time.
u = 0
So that,
v = 14 x 510
= 7140 m/s
The speed of the shuttle at the end of 8.50 minute is 7.14 Km/s.
B. the distance traveled can be determined by applying second equation of motion.
s = ut + [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]
where: s is the distance, u is the initial velocity, a is the acceleration and t is the time.
u = 0
s = [tex]\frac{1}{2}[/tex]a[tex]t^{2}[/tex]
= [tex]\frac{1}{2}[/tex] x 14 x [tex](510)^{2}[/tex]
= 7 x 260100
= 1820700 m
The distance that the shuttle has traveled during the given time is 1820.7 Km.
Electricity is produced in a hydroelectric plant when moving water turns a turbine.
Which describes this energy transformation from the turning turbine to electricity?
A
kinetic energy into electric energy
B
nuclear energy into electrical energy
С
thermal energy into electric energy
chemical energy into electric energy
Answer:
It involves both energy transformation and energy transfer.
Explanation:
In the hydroelectric power plant, the energy is transformed from kinetic energy to electricity. Therefore, option (A) is correct.
How is the energy transformed in the hydroelectric power plant?In the hydroelectric power plant, electric energy is generated using water from a turbine. The moving water is used to propel the turbines. At first, a large amount of the flowing water is stored across the dams. The kinetic energy of moving water is stored as potential energy in the dams.
Then the stored water will fall on the turbines and rotate the turbines which causes the potential energy of water to be used to turn the turbines which is mechanical energy.
Therefore, the potential energy of water is converted into mechanical energy. Then the rotating turbines generate electricity and the mechanical energy is converted into electrical energy.
Therefore, the hydroelectric power plant converts the kinetic energy of water into electrical energy.
Learn more about the hydroelectric power plant, here:
https://brainly.com/question/2635539
#SPJ2
Bru challenge with the physics.
Answer:
WHATATATATTAT
Explanation:
Which kind of wave interaction is shown?
Answer:
where?
Explanation:
ill edit my answer when see it
What famous equation describes the energy of stars?
Answer:
E=mc2
Explanation:
It explains that in their interiors, atoms fuse together, creating energy.
To solve this we must be knowing each and every concept related to energy and its different types. Therefore, the famous equation that describes the energy of stars is E=mc².
What is energy?In physics, energy is the capacity to accomplish work. It can be potential, kinetic, thermal, electric, chemical, radioactive, or in other forms.
There is also heat and work—energy inside the process of being transferred by one body to the other. Energy is always classified according to its type once it has been transmitted. As a result, heat transported could become thermal energy, whereas labor done may emerge as mechanical energy. The famous equation that describes the energy of stars is E=mc²
Therefore, the famous equation that describes the energy of stars is E=mc².
To know more about energy, here:
https://brainly.com/question/29763772
#SPJ2