Answer:
3.16×10⁹ pL
Explanation:
Given data:
Volume in mL = 3.16
Volume in picoliters = ?
Solution:
Picoliter and milliliters are units of volume. Milliliter is greater unit than picoliter.
1 mL = 10⁹ pL
Now we will convert the 3.16 mL into pL.
3.16 mL × 10⁹ pL/ 1 mL
3.16×10⁹ pL
After lab, all of Darrel's friends looked at his data and laughed and laughed. They told him that he was 30.8% too low in the boiling point he had just recorded. He had recorded a boiling point of 50o C on his data sheet. What is the correct boiling point of the liquid he was working with in lab?
Answer:
100°
Explanation:
For a boiling point is it always 100°
the number of moles in 4.5 x 10^24 atoms of oxegen is
Answer:
The answer is 7.48 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\ [/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{4.5 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 7.47508...[/tex]
We have the final answer as
7.48 molesHope this helps you
A cube of metal has a mass of 5.05 x 10°g and its density is known to be 12.77 g/mL, what is the volume of this metal?
A 395.5 mL
B. 2.529 mL
C. 63,910 mL
D. 64.48 ml
Answer:
Explanation:
option A is correct
A metal object has a density of 2 g/ml. When placed in a graduated cylinder with 500 ml of water, the
water rises to 508 ml. What is the mass of the metal object?
Answer:
The answer is 16 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
density = 2 g/ml
volume = final volume of water - initial volume of water
volume = 508 - 500 = 8 mL
We have
mass = 2 × 8
We have the final answer as
16 gHope this helps you
6. Now, revise your definition for waves to include energy and matter.
A wave is a phenomenon that...
Answer:
A wave is phenomenon that transfers energy from one point to another through a disturbance without affecting the matter.
Explanation:
A wave is phenomenon that transfers energy from one point to another through a disturbance without affecting the matter.
There are two main types of waves Longitudinal waves travels parallel to their source. For example, sound waves. Through a series of rarefactions and compressions, longitudinal waves are propagated. Transverse waves travel perpendicular to their source.Scientists have changed the model of the atom as they have gathered new evidence. One of the atomic models is shown below. A purple center outlined in black with two concentric black circles around the center, the inner circle having 2 small green balls on it and the outer circle having 8 small green balls on it. What experimental evidence led scientists to change from the previous model to this one? A few of the positive particles aimed at a gold foil seemed to bounce back. The colors of light emitted from heated atoms had very specific energies. Experiments with water vapor showed that elements combine in specific proportions. Cathode rays were bent in the same way whenever a magnet was brought near them.
Answer:
B: The colors of light emitted from heated atoms had very specific energies.
Explanation:
dont know if its the same question i had on edg but i think its B. Sorry if i didnt understand the question :)
Answer:
b
Explanation:
What metal is Potassium (K)?
Explanation:
Potassium is a chemical element with the symbol K and atomic number 19. Potassium is a silvery-white metal that is soft enough to be cut with a knife with little force. Potassium metal reacts rapidly with atmospheric oxygen to form flaky white potassium peroxide in only seconds of exposure
Answer:
alkali metalExplanation:
Potassium is a chemical element with symbol K and atomic number 19. Classified as an alkali metalhow does litmus indicator work
I need help in chemistry!!!!!!!!!!!
Answer:
ok whats the question dude just ask :PPPPPPPPPPPPPPPPPPPPPP
OTHERWISE EOEOEEOEOEOOEOEOEOEOEOOEOWOWOWOWOW
wow is mom upide down
Explanation:
How many carbon atoms are there in 2.23 grams of propane (C3H8)?
Answer:
3.05x10²³ (3 sig. fig.)
Explanation:
Propane (C₃H₈) is a colorless alkane gas with three carbons and eight hydrogen atoms. In 2.23 grams of propane, there are 3.05 x 10²³ carbon atoms present.
What is the number of particles/atoms?
The number of atoms or the particles being the smallest units is estimated by the product of the number of moles and Avogadro's number.
The Avogadro's number (Na) is used to determine the number of particles that have been present in a mole of a substance. A mole of a substance is said to have 6.022 × 10²³ ions, atoms, electrons, molecules, etc.
Moles of propane are calculated as,
Moles = mass ÷ molar mass
= 2.23 ÷ 440.094
= 0.05057
Now, the number of particles is calculated as,
Number = moles × Avogadro's number
= 0.05057 × 6.022 × 10²³
= 3.05 x 10²³
Therefore, 3.05 x 10²³ carbon atoms are present in 2.23 grams of propane.
Learn more about the number of particles/atoms here:
https://brainly.com/question/11884840
#SPJ2
Which RNA strand would match with this DNA strand?
AGGCTAAT
What is the DNA strand? You have not named it.
what does CER mean for science?
Explanation:
Claim, Evidence, Reasoning (CER) model, an explanation consists of: A claim that answers the question. Evidence from students' data. Reasoning that involves a rule or scientific principle that describes why the evidence supports the claim.
You will learn in this course that organic compounds have covalent bonds with a significant amount of energy stored in them. This is why we burn fossil fuels to generate energy to heat our homes or drive our cars. Given this information, which of the compounds listed below would you expect to have the most energy is its carbon-carbon bond?
Answer:
See explanation
Explanation:
This question is obviously supposed to be a multiple choice question but the options are missing.
However, the question intends to test the student's knowledge about combustion of fossil fuels. Fossil fuels are mostly composed of hydrocarbons of different chain lengths.
The longer the chain length, the greater the energy released when the compound is burnt since there are more energy stored in its bonds.
Hence, the correct answer to this question will be the option that contains the greatest number of C-C and C-H bonds.
Not all protists use flagella or cilia to move. Give an example of another way protists move and identify the type of protist that uses that mode of movement.
Answer: One of the most striking features of many protist species is the presence of some type of locomotory organelle, easily visible under a light microscope. A few forms can move by gliding or floating, although the vast majority move by means of “whips” or small “hairs” known as flagella or cilia, respectively. (Those organelles give their names to informal groups—flagellates and ciliates—of protists.) A lesser number of protists employ pseudopodia. Those same organelles may be used in feeding as well.
Explanation:
Homer notices that his shower is covered in a strange green slime. His friend Barney tells him that coconut juice will get rid of the green slime. Homer decides to check this out by spraying half of the shower with coconut juice. He sprays the other half of the shower with water. After 3 days of "treatment" there is no change in the appearance of the green
Answer:
This strange green slime is a colonization of fungi caused by the humidity of the bathrooms, which to be eradicated requires a non-specific antimicrobial such as sodium hypochlorite that generates an osmotic imbalance producing a fungicidal effect.
Explanation:
The fungi that appear in the form of slime at the microscopic level have many forms of colonization, by adding coconut milk it was assumed that this would generate an environment not suitable for their metabolism and reproduction but this did not happen, therefore they continued their reproduction.
Answer:
Explain?
Explanation:
Which statement desrcribes an intensive property of matter? -it is the same for every sample of a single substance -it depends on how a substance was formed -it is the same for every sample of every substances -it depends on the amount of substances present
Answer:
The statement which describes an intensive property of matter is - :
it is the same for every sample of a single substance.
Explanation:
It is the same for every sample of a single substance. -: Since a substance 's intense property does not depend on either mass or volume, it is the same for each sample of a single substance. Hence , this statement is correct .It depends on how a substance was formed -: Intensive property do not depend upon the amount of the substance or the formation of the sample . Therefore this statement ifs wrong about intensive property .It is the same for every sample of every substances -: This is not possible to be for every sample of the substance , a every substance have different qualities. Hence this statement is also incorrect.it depends on the amount of substances present -: This is the characteristic of a extensive property of matter that relies on the amount of the material/substance. This assertion is, therefore, not valid.Hence , the correct option is A (it is the same for every sample of a single substance).
Which pair of symbols represents nuclei with the same number of neutrons?
A. 56 Co and 580
B. 57Co and 58Ni
c. 57Fe and 58 Ni
D. 57Mn and 57Fe
Answer:
B
Explanation:
Mass number = number of neutrons + number of protons
Atomic number is the number of protons in the nucleus.
58Ni : 58 is the number of neutrons + number of protons
atomic number of Ni is 28. Thus, 58 -28 = 30 neutrons
57Co ; 57 is the number of neutrons + number of protons
number of Co is 27. Thus, 57 – 27 = 30 neutrons
Do 2. A student determines that there are 1.3 x 1025 molecules of an unknown
substance in a 968 g sample. Which compound most likely represents this
unknown substance?
CO
CIO
2)
CO2
N203
CLEAR ALL
Answer:
The correct option is;
CO₂
Explanation:
The given information are;
The number of molecules in the substance = 1.3 × 10²⁵
The mass of the substance = 968 g
Therefore, we have;
The number of molecules in one mole of a substance = 6.02 × 10²³
The number of moles present = (1.3 × 10²⁵)/(6.02 × 10²³) ≈ 21.595 moles
Therefore, 968 g = 21.595 moles
1 mole = 968/21.595 = 44.826 g
The mass of one mole of the substance = 44.826 g
Therefore the mass of one mole of the substance is closely related to the mass of one mole of CO₂ which is 44.01 g/mol.
The correct option is CO₂
The calculation is as follows:The number of molecules in one mole of a substance should be = 6.02 × 10²³
And,
The number of moles present is
= (1.3 × 10²⁵)/(6.02 × 10²³)
≈ 21.595 moles
Now
1 mole = 968/21.595 = 44.826 g
The mass of one mole of the substance = 44.826 g
So, the mass of one mole of the substance is closely related to the mass of one mole of CO₂ i.e. 44.01 g/mol.
Learn more: https://brainly.com/question/1504221?referrer=searchResults
The
force acting on an object is the combination of
all of the individual forces acting on it.
Check it
2 SCRATCHPAD
~ Improve this questio
Answer:
Yes as you can improve The invisible to human eye force or physical force if any being applied to a object of any mass and with all individual forces as they are acting on this object
Explanation:
How to separate these pure substance?if it is not possible, please write cannot be separate
Oxgen
Water
Gold
Carbon Dioxide
Carbon
Answer:
Oxgen- cannot be separated
Water - chemical change
Gold - cannot be separated
Carbon Dioxide - chemical change
Carbon - cannot be separated
Explanation:
A pure substance, which can either be an element or a compound, contains only one type of such element or compound. In opposition to a mixture, pure substances cannot be separated by physical means.
- Elements as a pure substance cannot be separated because it contains only one type of atom. However, compounds contain two or more types of atoms, and hence, can only be separated into its individual atoms via chemical means.
In this question, oxygen (O2), Gold (Au) and carbon (C) are all elements and hence cannot be separated. Carbon dioxide (CO2) and water (H2O) are compounds because they contain two different atoms respectively, hence, can be separated into individual atoms.
explanation of atomic radius
Ah yes.
The atomic radius is basically the distance between the nucleus of the atom and the outermost electron in the farthest orbital of the atom. The more bigger the atomic radius , the less powerful is the force that holds together the nucleus and its electrons.
Identify the heterogeneous mixtures.
Group of answer choices
salad
water
vegetable soup
apple juice
trail mix
brass
Two compounds of phosphorus and fluorine have the following
mass ratios.
Compound 1: 10.14 g fluorine for every 3.38 g phosphorus
Compound 2: 8.42 g fluorine for every 4.21 g phosphorus
Find the whole number ratio of masses of fluorine in compound
1 to compound 2.
Help me please
Answer: 3:2
Explanation: (10.14÷3.38)÷(8.42÷4.21)=1.5=3/2
The diagram shows a model of an animal cell. Explain how you'd modify the model to show the structures in a plant cell.
Answer:to show the structures of a plant cell,add a cell wall around the membrane and increase the size of the vaculoe insidethe cell, draw green ovals to represent chloroplasts.
Explanation:
How many electrons are there in the only energy level of helium, a noble gas? * Two Three Six Eight
Answer:
Explanation:
Noble gases are the least reactive of all known elements. That's because with eight valence electrons, their outer energy levels are full. The only exception is helium, which has just two electrons.
What is hydrochloride acid plus water plus salt and water
Aquanauts explore the area called?
Answer:
Inner space
Explanation:
I hope this helps
Name for each compoud
1.CO
2.H2SO4
3CaCO3
4 H202
5NaF
50 POINTS: PLEASE ANSWER AS QUICK AS POSSIBLE!
Question:
After getting their results in, a group of scientists went back and looked at their study. As planned, their experiment consisted of three groups. The first group received a new medicine at a normal dose, the second group received the medicine at half the dose, and the third group received the medicine at twice the dose.
Which of the following best describes what went wrong with the scientists’ study?
Choices:
- an improper experimental procedure
- the lack of a control group
- selection bias
- human error
Explanation:
The lack of a control group
Convert 122 moles of Methane to liters?