Answer:
1.05 mol
Explanation:
Step 1: Given data
Molarity of sulfuric acid (M): 1.325 M (1.325 mol/L)Volume of solution (V): 395 mL (0.395 L)Step 2: Calculate the moles of sulfuric acid (n)
We will use the following expression.
M = n/V
n = M × V
n = 1.325 mol/L × 0.395 L = 0.523 mol
Step 3: Calculate the moles of H⁺
H₂SO₄ dissociates completely according to the following equation.
H₂SO₄ ⇒ 2 H⁺ + SO₄²⁻
The molar ratio of H₂SO₄ to H⁺ is 1:2. The moles of H⁺ are 2/1 × 0.523 mol = 1.05 mol.
A sample of gas at 62.0°C occupies a volume of 4.80 L at a pressure of 2.90 atm. How many
moles of gas are contained in the sample?
Answer: 37.01 moles (mol) of gas
Explanation:Use PV=nRT
which is also equal to n=PV/RT
P=2.90
V= 4.80
R = 8.31 (R will always be the same in any equation)
T= 62.0
2.90 x 4.80= 13.92 / 8.31 x 62= 515.22
13.92/13.92=515.22/13.92
n= 37.01 mol
A paracetamol tablet was crushed and an excess of HCl 25cm³ of 1.0mol was added. the result of the solution was titrate against 0.5mol of NaOH. calculate the mass of CaCO3 in the paracetamol.
Answer:
1.35g of CaCO₃ are in the paracetamol
Explanation:
Assuming the volume of the 0.5mol NaOH was 23cm³
The CaCO₃ of paracetamol reacts with HCl as follows:
CaCO₃ + 2HCl → CO₂ + H₂O + CaCl₂
When an excess of HCl is added and titrated, we can find the moles of HCl that react = Moles CaCO₃ based on the second reaction:
NaOH + HCl → H₂O + NaCl
Moles added of NaOH:
23cm³ = 0.023L * (0.5mol / L) = 0.0115 moles NaOH = Moles HCl in excess
Moles of HCl:
25cm³ = 0.025L * (1.0mol / L) = 0.025 moles HCl
The moles of HCl that reacted = Moles CaCO₃ are:
0.025 moles - 0.115 moles = 0.0135 moles CaCO₃
The mass of CaCO₃ -Molar mass: 100.09g/mol- is:
0.0135 moles CaCO₃ * (100.09g/mol) =
1.35g of CaCO₃ are in the paracetamolChanges of state is an example of a chemical change.
CHANGES
OF STATE
True
False
A device which make work easy it call
Which of the following leads to a higher rate of effusion?
Answers:
1. Reduced temperature
2. Lower molar mass
3. Slower particle movement
4. Cooler gas sample
Answer:
Lower molar mass :)
Explanation:
Answer:
2. Lower Molar Mass
Explanation:
effusion can increase with either temperature increase, faster moving particles, or when the gas has lower molar mass. the only answer option that fits the description is answer option 2. Lower molar mass
Car manufacturers use radiation for which task?
A) Sealing Windows
B) Drying paint
C) Cleaning tires
D) Lubricating engines
THE CORRECT ANSWER IS B.
#edge2021
Answer:
Indeed it is B, you are correct! :3
Explanation:
:3
Answer:
B. Drying paint
Car manufacturers use UV radiation to dry the paint o the vehicle. The high reflectivity of infrared radiation helps to keep the car interior cool. It also gives advantages over convection heating.
Explanation:
Hope it helps
what is a reservoir?
Answer:
a storage space for fluids
Explanation:
Answer:
an area where large amounts of water are stored
Explanation:
Determine the number of moles of phosphorus contained in 4.41 x 10^24
atoms of phosphorus.
Answer:
7.33 mol P
Explanation:
4.41 × 10²⁴ / 6.02 × 10²³ = 7.33
Answer:
the answer is 7.33 mol P
Explanation:
A walnut stuck to a pin is burned beneath a can containing 100.0 grams of water at 21°C. After the walnut has completely burned, the
water's final temperature is a warmer 28°C. How much heat energy arose from the burning walnut?
2,000 joules
3,000 joules
5,000 joules
O 9,000 joules
Answer:5000 i think
Explanation:
Which of the following models a synthesis reaction?
Answer: D
Explanation: i’m right
Itis usually alloyed with aluminum to produce high quality, anti-corrosion
wheel mags
Answer:
Aluminum is the second most abundant metallic element on earth. It has been estimated that 8% of the earth's crust is composed of aluminum, usually found in the bauxite form. On a volume basis, aluminum has become the most widely used non-ferrous metal.
Primary aluminum production is the quantity of primary aluminum produced in a specified period and the quantity of molten or liquid metal tapped from pots that is weighed before transfer to a holding furnace or before further processing.
Explanation:
How many liters of carbon dioxide gas is produced from 7.98x10^24 molecules of C4H10 (2C4H10 + 13O2 → 8CO2 + 10H2O)?
Copper has two isotopes,
copper-63 and copper-65. It has an atomic mass of 63.546 amu. Sketch a pie graph that shows the approximate abundance of each
copper isotope based on the atomic mass?
Answer:
69.152 % → 63Cu
30.848 % → 65Cu
Explanation:
As you know, the average atomic mass of an element is determined by taking the weighted average of the atomic masses of its naturally occurring isotopes.
Explain how to use the displacement method to find the volume of an irregularly shaped object.
Answer:
Subtract the volume of the water alone from the volume of the water plus the object. For instance, if "b" was 50 milliliters and "a" was 25 milliliters, the volume of the irregularly shaped object would be 25 milliliters.
Explanation:
Hope it helps
Solve this problems using the equation: C = λ x ν........ A microwave oven emits radiation at a wavelength of 5.00 x 10e-5 m. What is the frequency of this radiation?
Answer:
c = λ x ν
v =c/λ=(3*10e8)/(5.00 x 10e-5)=6000000000000
f = v/λ =6000000000000/5.00 x 10e-5=120000000
Explanation:
Methane is the major component of natural gas. The standard molar enthalpy of formation of methane CH4 is -74.9 kJ/mol. For the balanced reaction equation of methane use:
CH4 + 2O2 --> CO2 + 2H2O.
All the chemicals in this reaction are gases. What is the enthalpy change of this reaction in kJ/mol?
Answer:
[tex]\Delta _rH=-802.2kJ/mol[/tex]
Explanation:
Hello!
In this case, according to the given chemical reaction, it is possible to calculate the enthalpy change of the reaction via:
[tex]\Delta _rH=\Delta _fH_{CO_2}+2\Delta _fH_{H_2O}-\Delta _fH_{CH_4}[/tex]
Since the enthalpy of formation of oxygen is 0. Thus, given the enthalpies of formation of gaseous carbon dioxide and water, we obtain:
[tex]\Delta _rH=(-393.5kJ/mol)+2(-241.8kJ/mol)-(-74.9kJ/mol)\\\\\Delta _rH=-802.2kJ/mol[/tex]
Best regards!
24. What is the total number of grams of potassium chloride needed to saturate exactly 300 grams of water at 10°C?
1) 70 2) 90 3) 80 4) 60
Answer:
That would be 90 grams
Explanation:
This should be right but please, please, please correct me if I'm worng because I dont want anyone to fail because of me. Have a great day luv <3
The answer is option B , 90 grams of potassium chloride(KCl) is needed to saturate exactly 300 grams of water at 10°C
How do you define Solubility ?The measure of the degree to which a substance gets dissolved in a solvent to become a solution.
The solubility of KCl in water at 10°C is 31.2gm/100gm of water .
So in 300 gm of water 3 * 31.2 gm = 93.6 gm
Using Significant Figures we can select option B i.e. 90 gm.
Hence Option B , 90 grams of potassium chloride is needed to saturate exactly 300 grams of water at 10°C
To know more about Solubilty
https://brainly.com/question/8591226
#SPJ2
Fill in the Blank
All three types of rock form in which earth layer? _________.
A reversible change, where appearance is altered, but the composition stays the same is _________. An irreversible change that alters the chemical makeup of a substance is _________. Is the melting of ice into liquid water a physical or chemical change? _____ What is involved in any change in matter? ________
The lithosphere is where all three forms of rocks form. A physical change is a reversible change and chemical changes are irreversible. The melting of ice is a physical change and change of matter is chemical.
What are physical and chemical changes. ?The lithosphere is the layer of earth where all three types of rocks such as igneous, metamorphic, and sedimentary can be found. The physical changes are those that affect physical properties and are reversible like heating and cooling.
While the chemical changes are irreversible. The physical changes lead to the change in form of the substance while chemical change leads to the rearrange of matter.
Find out more information about the types of rocks.
brainly.com/question/26400505
HELPPP PLEASE !/!/!/!/!/!/!/!
Answer:
the second question should be along the staircase
Plants do not grow well when the soil is either too acidic or too basic. How do you solve these problems?
__Zn + __HCl --> __ZnCl2 + __H2
If 26.22 Liters of Hydrogen gas are produced, how many moles of Hydrochloric acid were reacted?
Answer:
1. The balanced equation:
Zn + 2HCl —> ZnCl₂ + H₂
The coefficients are: 1, 2, 1, 1
2. 2.34 moles of HCl
Explanation:
1. The balanced equation
__Zn + __HCl —> __ZnCl₂ + __H₂
There are 2 atoms of H on the right side and 1 atom on the left side
It can be balance by writing 2 before HCl as shown below:
Zn + 2HCl —> ZnCl₂ + H₂
Now the equation is balanced.
The coefficients are: 1, 2, 1, 1
2. Determination of the number of mole of HCl that reacted.
NOTE: 1 mole of H₂ = 22.4 L at STP.
Zn + 2HCl —> ZnCl₂ + H₂
From the balanced equation above,
2 moles of HCl reacted to produce 1 mole (i.e 22.4 L) of H₂.
Finally, we shall determine the number of mole of HCl needed to produce 26.22 L of H₂. This can be obtained as follow:
From the balanced equation above,
2 moles of HCl reacted to produce 22.4 L of H₂.
Therefore, Xmol of HCl will react to produce 26.22 L of H₂ i.e
Xmol of HCl = (2 × 26.22)/22.4
Xmol of HCl = 2.34 moles
Thus, 2.34 moles of HCl is needed for the reaction.
Why are many chemical names so complex?
Answer:
cause they like it that way
Explanation:
btw cant tell if this is legit or not
Which of the statements listed below is negative aspect of a volcanic eruption?
A. generating geothermal energy.
B. lava flows and lahars clear areas of woodland or agriculture,
C. the dramatic scenery created by volcanic eruptions attracts tourist.
D. lava and ash deposited during a volcanic eruption breaks down to provide valuable
nutrients for the soil.
CANO
Answer:
C . the dramatic scenery created by volcanic eruptions attracts tourists.
The statement 'lava flows and lahars clear areas of woodland or agriculture' is a negative aspect of a volcanic eruption (Option B).
A volcanic eruption refers to the expulsion of lava and dangerous gases from a volcano.These volcanic eruptions can destroy large areas including lands for agriculture or woodland.A lahar can be defined as a mix of cold/warm water and fragments of sediments (rocks) that flow fast down the slope of the volcano.In conclusion, the statement 'lava flows and lahars clear areas of woodland or agriculture' is a negative aspect of a volcanic eruption (Option B).
Learn more in:
https://brainly.com/question/1622004
Solve whoever gets it right first gets brainlest!
__Na3PO4 + __Sr(NO3)2 --> ___Sr3(PO4)2 + __NaNO3
If .0789 moles of Strontium Nitrate are reacted, how many moles of Sodium Phosphate were reacted?
Answer:
0.0526mol
Explanation:
The chemical equation given in this equation is as follows:
Na3PO4 + Sr(NO3)2 → Sr3(PO4)2 + NaNO3
However, this equation is unbalanced as the number of atoms of each element on each side does not correlate. The balanced equation is as follows:
2Na3PO4 + 3Sr(NO3)2 → Sr3(PO4)2 + 6NaNO3
This balanced equation means that:
2 moles of Sodium Phosphate (Na3PO4) is required to react with 3 moles of Strontium Nitrate (Sr(NO3)2)
Hence, if 0.0789 moles of Strontium Nitrate are reacted, then 0.0789 × 2/3
moles of sodium phosphate will also react.
= 0.0789 × 2/3
= 0.1578/3
= 0.0526mol
When these marbles collide, what force is experienced by each marble?
Answer:
when they collide they can experience collision
because without force collision wouldn't have happen.
PLZ HELP I NEED THIS RN!
when the balls reach the bottom of the ramp, which statement will describe their energy?
A. they will have no kinetic energy
B. they will have 100% potential energy
C. they will have 100% kinetic energy
C. they will have different amounts of potential energy
Answer:
they will have 100% kinetic energy
Explanation:
all the potential energy has been used when it is at the bottom of the ramp
Which one of the following atoms has the largest radius?
Sr, Rb, K, Ca, Y
Answer: Rb (rubidium) has a radius of 290 pm, making it have the largest of the 5 elements listed.
Explanation:
How does carbon cycle
Answer:
The carbon cycle describes the process in which carbon atoms continually travel from the atmosphere to the Earth and then back into the atmosphere. ... Carbon is released back into the atmosphere when organisms die, volcanoes erupt, fires blaze, fossil fuels are burned, and through a variety of other mechanisms.
hopefully that answered your question. brainliest would be appreciated. have a awesome day!
Answer:
evaporation or released from natural eruptions by nature
Questions
1. Is the statement true that a gas takes on the shape of the container?
2. What happened to the water when it was poured into the glass? Into the square container?
3. Did the wood have a fixed shape?
4. Of what state of matter is water an example?
5. Of what state of matter is
ice an example?
6. Of what state of matter is steam an example?
This is for a project. Complete in complete sentences. Please. Sorry if this is confusing
Answer:
1. It will take the shape of its container. Particles can move about within a liquid, but they are packed densely enough that volume is maintained. Gaseous matter is composed of particles packed so loosely that it has neither a defined shape nor a defined volume. A gas can be compressed
2. However after pouring the water from one short glass into a tall glass, to be the same amount after being poured into any other container
3. Yes, wood have a fixed shape. Explaination: The reason is that it's solid and solids have a definite volume and shape. ... They have shapes that do not change and volumes that can be measured
4. Water is known to exist in three different states; as a solid, liquid or gas. Clouds, snow, and rain are all made of up of some form of water. A cloud is comprised of tiny water droplets and/or ice crystals, a snowflake is an aggregate of many ice crystals, and rain is just liquid water
5. Solids are sometimes formed when liquids or gases are cooled; ice is an example of a cooled liquid which has become solid. Other examples of solids include wood, metal, and rock at room temperature
6. For example, water commonly exists in three states of matter: solid (ice), liquid (water), and gas (steam)
Explanation:
plzzzzzzzzzzzzzz give brainly
1. It will adopt its container's shape. Within a liquid, particles can move around, yet the volume is maintained because of the liquid's dense packing. Particles in gaseous stuff are arranged so haphazardly that neither their shape nor their volume can be determined.
What is liquid ?The term liquid is defined as substance which is not solid but which flows and can be poured and take a shape of container. water is an example of liquid.
2. However, the same amount of water would be poured into any other container after being transferred from one short glass to a tall glass.
3. The shape of wood is fixed. It's solid, and solids have a distinct volume and shape, which explains why. They have measurements-able volumes and unchanging forms.
4. There are three recognized states of water: solid, liquid, and gas. Snow, rain, and clouds are all composed of water in some way. A snowflake is an accumulation of several ice crystals, a cloud is made up of microscopic water droplets and/or ice crystals, and rain is just liquid water.
5. When liquids or gases are chilled, solids can occasionally form; ice is an example of a cooled liquid that has solidified. At room temperature, solids also include wood, metal, and rock.
6. As an illustration, water typically exists in three states: solid (ice), liquid (water), and gas (steam).
Thus, to learn more about liquid, follow the link;
https://brainly.com/question/20922015
#SPJ2