Answer: There are [tex]6.926\times 10^{23}[/tex] molecules of glucose.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the molecules, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {Avogadro's number}}[/tex]
[tex]1.15=\frac{x}{6.023\times 10^{23}}[/tex]
[tex]x=1.15\times 6.023\times 10^{23}=6.926\times 10^{23}[/tex]
Thus there are [tex]6.926\times 10^{23}[/tex] molecules of glucose.
Can someone help me with this
Answer:
a
b
d
c
Explanation:
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee (so bot sees more so thinks it explain)
One mole of a metallic oxide reacts with one mole of hydrogen to produce two moles of the pure metal
and one mole of water. 5.00 g of the metallic oxide produces 2.32 g of the metal. What is the metallic
oxide? (Use molar masses)
Answer:
Lithium oxide, Li₂O.
Explanation:
Hello!
In this case, according to the given amounts, it is possible to write down the chemical reaction as shown below:
[tex]M_2O+H_2\rightarrow 2M+H_2O[/tex]
Which means that the metallic oxide has the following formula: M₂O. Next, we can set up the following proportional factors according to the chemical reaction:
Thus, we perform the operations in order to obtain:
[tex]\frac{10X}{(2X+16)}=2.32[/tex]
So we solve for x as shown below:
[tex]10X=2.32(2X+16)\\\\10X=4.64X+37.12\\\\X=\frac{37.12}{10-4.64}\\\\X= 6.93g/mol[/tex]
Whose molar mass corresponds to lithium, and therefore, the metallic oxide is lithium oxide, Li₂O.
Best regards!
After adding 20.0 mL of 5% NaOH solution into the remaining organic layer, followed by mixing and venting, the solution separated into two distinct layers. Match the following:
1. The top layer was the ______________ layer.
2. 9-fluorenone was most soluble in the ____________ layer.
3. Deprotonated chloroanilic acid was most soluble in the _____________ layer.
4. The bottom layer was the __________________ layer.
5. The organic layer was a ________________ colored solution.
6. The aqueous layer turned into a _____________ colored solution.
a. organic
b. aqueous
c. yellow
d. pink
Answer:
Explanation:
The objective of this experiment is to match the expected result with each of the propositions given after the experiment had been carried out.
1. The top layer was the organic layer. This is because all the organic compounds have lesser density than water except chloroform that will be formed when NaOH is added.
2. 9-fluorenone was most soluble in the organic layer. This is so as a result of its non-polar carbon structure.
3. Deprotonated chloroanilic acid was most soluble in the aqueous layer as a result of the formation of an electrovalent bond with water.
4. The bottom layer was the aqueous layer as a result of the huge amount of water density.
5. The organic layer was a yellow colored solution.
6. The aqueous layer turned into a pink colored solution.
Which of the following involves a reaction in which energy is absorbed?
O A. An instant cold pack
O B. A car's engine
C. A chemical hand-warmer
O D. A campfire
Ways in which ions may form include
Answer:
Ions are formed by the addition of electrons to, or the removal of electrons from, neutral atoms or molecules or other ions; by combination of ions with other particles; or by rupture of a covalent bond between two atoms in such a way that both of the electrons of the bond are left in association
The ways Ions may form includes the following
The addition of electrons to neutral atoms or moleculesThe removal of electrons from neutral atoms or molecules By combination of ions with other particlesWhen the number of protons does not equal the number of electrons in an atomMeaning of an IonAn ion can be defined as an atom or group of atoms possessing an electrical charge. Ions are of two types, they are : Anions which are negatively charged and Cations which are positively charged.
In conclusion, an ion can be formed by many ways, but a few has been listed above.
Learn more about ions : https://brainly.com/question/14511468
#SPJ2
Fill the plastic cup half full with room-temperature water, and drop in the whole tablet. Use a stopwatch to measure how long it takes the tablet to dissolve completely. Record your observation.
Answer:
it bubbles up and has a chemical reaction also releases co2
Explanation:
Hope it helps <3
Apply: Click Reset. Set m to 1.0 kg, L to 2.0 m, g to 9.8 m/s2, and θ to –40 degrees. What is the maximum velocity of this pendulum? Show your work. (Hint: The exact height of the pendulum is now 0.468 m.)
Answer:
[tex]3.029\ \text{m/s}[/tex]
Explanation:
m = Mass of pendulum = 1 kg
L = Length of pendulum = 2 m
g = Acceleration due to gravity = [tex]9.8\ \text{m/s}^2[/tex]
h = Height of the pendulum = 0.468 m
[tex]\theta[/tex] = Angle of deflection = [tex]-40^{\circ}[/tex]
[tex]\cos\theta=\dfrac{L-h}{L}\\\Rightarrow h=L-L\cos\theta\\\Rightarrow h=L(1-\cos\theta)\\\Rightarrow h=2(1-\cos(-40))=0.468\ \text{m}[/tex]
The energy balance of the pendulum is as follows
[tex]mgh=\dfrac{1}{2}mv^2\\\Rightarrow v=\sqrt{2gh}\\\Rightarrow v=\sqrt{2\times 9.8\times 0.468}\\\Rightarrow v=3.029\ \text{m/s}[/tex]
The maximum velocity of this pendulum is [tex]3.029\ \text{m/s}[/tex].
Answer:
Max velocity = 3.03 m/s
Explanation:
Mgh = ½ mv2
(1 kg)(9.8 m/s2)(0.468 m) = ½ (1 kg) v2
2 x 4.5864 = ½ v2 x 2
√V2 = √9.1728
V = 3.03 m/s
I hope this helps!
How are the smallest ocean waves produced?
Answer:
The moon is not pulling the tide as hard
Explanation:
I suppose, I know it dills with the moon though
Explanation:
Normalmente, las olas se forman por el viento aunque su historia comienza muy lejos, en el Sol. ... Cuando el viento sopla sobre el mar, las partículas de aire rozan a las partículas de agua y se empiezan a formar pequeñas olas de pocos milímetros de longitud, llamadas ondas capilares.
Normally, waves are formed by the wind, although their history begins very far away, in the Sun. ... When the wind blows over the sea, the air particles brush against the water particles and small waves of few millimeters in length, called capillary waves.
What is the energy of an electron in the third energy level of hydrogen?
Answer:
Electrons in a hydrogen atom must be in one of the allowed energy levels. If an electron is in the first energy level, it must have exactly -13.6 eV of energy.
...
Energy Levels of Electrons.
Energy Level Energy
1 -13.6 eV
2 -3.4 eV
3 -1.51 eV
4 -.85 eV
What is the definition of lava?
Answer:
Lava, magma (molten rock) emerging as a liquid onto Earth's surface. The term lava is also used for the solidified rock formed by the cooling of a molten lava flow.
Explanation:
A formula unit made with Na and unknown nonmetal "Z" has the formula, NaZ. Which element does "Z" represent?
In which state of matter are the particles at rest (not moving at all)?
none of these
solid
liquid
gas
Answer:
Solids for sure
particles of solid cant flow.
Answer:
B)Solids
Solids have tightly packed particles unlike liquids and gases whose particles can move freely but rate of movement is highest in gas while compared to water
Based on this reaction, how many moles of H2 can be obtained starting with 3 mol CH4?
Answer:
9 moles of H₂ are produced
Explanation:
Note: The question is incomplete. the complete question and the given image is found below:
The diagram represents a high-temperature reaction between CH4 and H2O. Based on this reaction, how many moles of H2 can be obtained starting with 3 mol CH4?
From the attachment, the equation of the reaction can be written as:
2CH₄ + 2H₂O ----> 2CO + 6H₂
From the equation the reaction shown above, 2 moles of methane, CH₄ reacts with 2 moles of gaseous water or steam, H₂O (since the reaction occurs at a high temperature) to produce six moles of hydrogen gas, H₂.
Therefore, starting with 3 moles of CH₄ and assuming the number of H₂O are equal to or greater than three moles (since the mole ratio of CH₄ to H₂O is 1 : 1 according to the equation of the reaction), number of moles of H₂ that will be produced = 3 * 6/2 moles of H₂
number of moles of H₂ produced = 9 moles
Therefore, 9 moles of H₂ are produced
Considering the reaction stoichiometry, 9 moles of H₂ can be obtained starting with 3 moles of CH₄.
The balanced reaction is:
CH₄ + H₂O → CO + 3 H₂
Reaction stoichiometryBy reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 mole H₂O: 1 mole CO: 1 mole H₂: 3 molesAmount of moles of H₂ obtainedThen you can apply the following rule of three: if by stoichiometry 1 mole of CH₄ produce 3 mole of H₂, 3 moles of CH₄ will produce how many moles of H₂?
[tex]amount of moles of CH_{4} =\frac{3 moles of CH_{4}x3 moles of H_{2} }{1 mole of CH_{4}} [/tex]
amount of moles of H₂= 9 moles
Finally, 9 moles of H₂ can be obtained starting with 3 moles of CH₄.
Learn more about reaction stoichiometry:
brainly.com/question/16487206?referrer=searchResults
brainly.com/question/14446695?referrer=searchResults
brainly.com/question/11564309?referrer=searchResults
brainly.com/question/4025026?referrer=searchResults
brainly.com/question/18650135?referrer=searchResults
Which of the following substances contains MOSTLY ionic bonding? A) LIF B) CO2 C) AICI: D) BeCl2 E) Cu
Answer: [tex]LiF[/tex] , [tex]AlCl_3[/tex] and [tex]BeCl_2[/tex]
Explanation:
An ionic bond is formed when an element completely transfers its valence electron to another element. The element which donates the electron is known as electropositive element or the metal and the element which accepts the electrons is known as electronegative element or non metal.
A covalent bond is formed when an element shares its valence electron with another element. This bond is formed between two non metals.
[tex]LiF[/tex] , [tex]AlCl_3[/tex] and [tex]BeCl_2[/tex] contain ionic bonds as they aremade up of metals and non metals.
if a gas at 300k occupies 3.60 liters at a pressure of 1.00 atm, what will be it’s new pressure if the volume is compressed to 2.0 liters at a temperature of 450K?
Answer: The new pressure if the volume is compressed to 2.0 liters at a temperature of 450K is 2.7 atm
Explanation:
The combined gas equation is,
[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 1.00 atm
[tex]P_2[/tex] = final pressure of gas = ?
[tex]V_1[/tex] = initial volume of gas = 3.60 L
[tex]V_2[/tex] = final volume of gas = 2.0 L
[tex]T_1[/tex] = initial temperature of gas = [tex]300K[/tex]
[tex]T_2[/tex] = final temperature of gas = [tex]450K[/tex]
Now put all the given values in the above equation, we get:
[tex]\frac{1.00\times 3.60}{300}=\frac{P_2\times 2.0}{450}[/tex]
[tex]P_2=2.7atm[/tex]
The new pressure is 2.7 atm
How many molecules in 4.10 mol H2O?
6.02×10^23
1.4×10^23
2.47×10^24
1.15×10^-23
Answer:
2,47 * [tex]10^{24}[/tex] (molecules)
Explanation:
Avogadro's number is a very important relationship: 1 mole = 6,02 * [tex]10^{23}[/tex] atoms, molecules, protons, etc.
To convert from moles to molecules, multiply the molar amount by Avogadro's number.
4,1 mol * 6,02 * [tex]10^{23}[/tex] ≈ 24,7 * [tex]10^{23}[/tex] = 2,47 * [tex]10^{24}[/tex] (molecules)
Therefore the third answer is correct
please help me with this problem
the amount of reactants = the amount of products
N2 + 3H2 --> 2NH3
Please answer this. List the three most abundant minerals in this bottle of mineral water.
In order to use a pipet, place a at the top of the pipet. Use this object to fill the pipet such that the of the liquid is even with the volume line. Release the liquid, touching the tip of the pipet to the side of the container if necessary to release the last drop the pipet tip.
Answer:
bulb or pump, meniscus, outside
Explanation:
In order to use a pipet, place a BULB OR PUMP at the top of the pipet. Use this object to fill the pipet such that the MENISCUS of the liquid is even with the volume line. Release the liquid, touching the tip of the pipet to the side of the container if necessary to release the last drop OUTSIDE the pipet tip.
Western art criticism unique in that
Answer:
they are a lot tougher and are expecting only greatness, sort of like theater critiques.
Explanation:
what is the answer to this?
Answer:
1. I
2.LOVE
3.YOU
JUST KIDDING
REAL ANSWER
Therefore, to get a neutral compound requires two Br and one Ca - ie, CaBr2.
hope it helps pleass give me a brainlliest answer love youu
Why is it important to know gas properties at STP?
Answer:
STP values are most often cited for gases because their characteristics change dramatically with temperature and pressure. One common definition of STP is a temperature of 273 K (0° Celsius or 32° Fahrenheit) and the standard pressure of 1 atm. Under these conditions, one mole of a gas occupies 22.4 L.
33) Which is the correct name for the molecule depicted below?
A. 2-isopropyl-2,3,4-trimethylbutane
B. 2-isopropyl-2,3-dimethylpentane
C. 2,3,3,4-tetramethylhexane
D. 1,1,2,2,3-pentamethylpentane
E. None of these choices is correct.
Answer:
C. 2,3,3,4-tetramethylhexane
Explanation:
PLEASE ANSWER QUICKLY!!!
Answer:
A and C
Explanation:
An ion dipole interaction exists between a molecule having a dipole and an ion. The positive end of the dipole interacts with a negative ion while the negative end of the dipole interacts with a positive ion.
If we look at the options listed, the H-H bond is non polar, hence it can not show ion-dipole interaction.
Similarly, the H-F bond is polar, but the negative end of the dipole (F) is made to interact with a sulphide(negative) ion which is incorrect.
ch4(g) + h2o(g) 3h2(g) + co(g) enthalpy of formation of CH4
Answer:
Kc=[[CO][H2]3[CH4][H2O]
3.90=(0.30)(0.10)3[CH4]×0.02
[CH4]=0.023.90×0.30×(0.10)3=5.85×10−2 M
Thus, the concentration of methane in the mixture is 5.85×10−2 M.
Number of liters in 0.50 moles of O2
Answer:
there are about 11.2 liters
A sample consisting of 65.0 g of xenon is confined in a container at 2.00 atm and 298 K and then allowed to expand adiabatically (a) reversibly to 1.00 atm, (b) against a constant pressure of 1.00 atm. Calculate the final temperature and the expansion work at each case. Use the fact that xenon is a monoatomic gas.
Answer:
[a]. - 445.45J,
[b]. - 367.92 J
Explanation:
The following parameters are given in the question above. These information are used in solving this problem.
The mass of Xenon = 65.0 g of xenon, pressure = 2.00 atm, temperature = 298 K.
The number of moles of xenon = mass/ molar mass = 65g/ 131.293= 0.495.
The cp= 3/2 R, cp =3/2R + R = 5/2 R.
j = cp/cv = 3/2.
[a]. The final temperature,T2 = (2)^-2/3 × (298)^5/3 = T2^5/3.
Final temperature,T2 = 225.84K.
Expansion work = nCv [ T₂ - T₁] = 0.495 × 3/2 × 8.314 × [ 225.84 - 298] = - 445.45J.
(b). The final temperature can be Determine as;
3/2( T2 - 298k) = - 1 (T2 /1 - 298/2).
3/2(T2 - 298) = - T2 + 149K.
3T2 - 894 = - 2T2 +298K.
T2 = 238.4 K.
Workdone= nCv (T2 - T1) = 0.495 × 3/2 × 8.314 (238.4 - 298) = - 367.92 J.
Which of the following represents C3H8?
Among the given options the compound with the formula C₃H₈ is option C. It is an organic compound under named as propane.
What is propane?
Propane is an organic compound classified as a hydrocarbon with saturated carbon - hydrogen bonds. It's formula is C₃H₈. It contains 3 carbons and 8 hydrogens.
The two end carbons contains 3 hydrogens each and the middle carbon contains 2 hydrogens. They are all bonded through sigma bonding. The compound in A is C₅H₁₂ and in B, it is C₆H₁₄.
The formula of the compound in option D is C₅H₁₀. Hence, the skeleton showing the compound with the formula of C₃H₈ is option C.
To find more on propane, refer here:
https://brainly.com/question/24159489
#SPJ2
Which of the following represent chemical processes? Which represent physical processes?
A). Calcium chloride dihydrate (CaCl2 * 2H2O) slowly heated in a crucible to become calcium chloride (anhydrous).
B). A hydrocarbon such as propane (C3H8) undergoes combustion to power a grill
C). A rock climber’s rope becomes frayed and turns the color of the rocks
D). A dog urinates on an air conditioner coil and the coil becomes corroded
Answer:
A). Calcium chloride dihydrate (CaCl2 * 2H2O) slowly heated in a crucible to become calcium chloride (anhydrous).
Dehyration is a physical process
B). A hydrocarbon such as propane (C3H8) undergoes combustion to power a grill
Combustion is a chemical process.
C). A rock climber’s rope becomes frayed and turns the color of the rocks
This is physical process
D). A dog urinates on an air conditioner coil and the coil becomes corroded
Corrsion is a chemical process.
Explanation:
The chemical process is combustion and corrosion i.e. B and D. The physical change has been the heating of calcium chloride, and fraying of rock i.e. A and C.
A chemical process has been given as the reaction in which the composition of the sample changes. It has been an irreversible process.
A physical process has been described as a change in the physical properties of substances. It is a reversible process.
The following reaction can be given as:
A. The reaction between calcium chloride and water has been mediated by heating. It is a reversible process and does not change the chemical composition. It is a physical process.
B. The combustion results in the change in the chemical constituents of propane. It is a chemical process.
C. There has been no change in the chemical composition of materials. It has been a physical process.
D. The corrosion has resulted from the chemical change in the iron. It has been a chemical process
Thus, the chemical process is combustion and corrosion. The physical change has been the heating of calcium chloride, and fraying of rock.
For more information about the chemical process, refer to the link:
https://brainly.com/question/1286014
Read the list of common household substances.
Yogurt, soaps, window cleaner, vinegar
Which of these substances are likely to have a slippery feel? (1 point)
Yogurt, soaps
Yogurt, vinegar
Soaps, window cleaner
Window cleaner, vinegar
Answer:
A
Explanation: