Answer: The volume of [tex]NaOH[/tex] required is 25.0 ml
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]HNO_3[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]HNO_3[/tex] solution = 2.00 M
[tex]V_1[/tex] = volume of [tex]HNO_3[/tex] solution = 50.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 4.00 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = ?
Putting in the values we get:
[tex]1\times 2.00\times 50.0=1\times 4.00\times V_2[/tex]
[tex]V_2=25.0ml[/tex]
Therefore, volume of [tex]NaOH[/tex] required is 25.0 ml
The volume of 4.00 M NaOH is required to exactly neutralize 50.0 ml of a solution of a 2.00 M solution of [tex]HNO_3[/tex] is 25.0 ml.
What is [tex]HNO_3[/tex]?[tex]HNO_3[/tex] is nitric acid also known as the spirit of niter. It is colorless in its original form but appears yellow-colored.
By the neutralization law
[tex]n_1M_1V_1 = n_2M_2V_2[/tex]
n1 = 1
M1 = 2.00
M2 = 4.00
V1 = 50.0 ml
n2 = NaOH = 1
Putting the value in the formula
[tex]1 \times 2.00 \times 5.00 ml = 1 \times 4.00 \times V_2\\\\V_2 = 25.0\; ml[/tex]
Thus, the volume of NaOH required is 25.0 ml.
Learn more about nitric acid
https://brainly.com/question/26015251
350.0 ML of air is at 23.0°C what is the volume at 90.0°C
Answer:
V=0.430 Liters
Explanation:
First off you need to convert ml to l and celsius to kelvin, in order for them to be in the S.I.
So, 350.0mL is 0.350 L and 23.0 C is (273.15+23=) 296.15 K (you can ignore the 0.15)
From the equation pV=nRT, lets name this equation (1), we can tell that the number of moles, pressure, and R, stay the same. The only thing changing is the volume, and temperature.
With the information given, let's figure out the pressure. From equation (1) if we solve it for the pressure of the gas, p=nRT/V => p=nR*296.15/0.350 => p=846.15 *nR
Now, we have to figure out the volume of the gas at 90.0 C (363.15 K), and solve equation (1) for volume, using the pressure we previously found.
v=nRT/p => v=nR*363.15/846.15*nR => (the nR's from top and bottom go away) v=0.429 L
Since we used 273.15 for the conversion of celsius to Kelvin, we could round up the number to
V=0.430 Liters
Someone help me out with this brain pop ⚠️
8. Calculate the pH of a solution if the [OH-] concentration is 0.015 M.
A) 1.82
B) 8.82
C) 12.18
D) 4.32
Answer:
1.82
Explanation:
pH is given by the equation
why does the sky appear orang or red at sunset and sunrise?
Answer:
Because the sun is low on the horizon, sunlight passes through more air at sunset and sunrise than during the day, when the sun is higher in the sky. More atmosphere means more molecules to scatter the violet and blue light away from your eyes.
Given this balanced equation: CS2 + 3 O2 CO2 + 2 SO2
Calculate how many moles of SO2 can be produced with when given 4 moles of CS2.
58.67 g
Now calculate how many moles of SO2 can be produced with when given 4 moles of O2.
Which one is the limiting reactant (4 moles CS2 or 4 moles of O2)? How do you know?
Answer: The FitnessGram PACER Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The test is used to measure a student's aerobic capacity as part of the FitnessGram assessment. Students run back and forth as many times as they can, each lap signaled by a beep sound.
Explanation:
10 How does no-till farming help the environment?
A It decreases soil erosion.
C It increases fertilizer use.
B It increases soil removal.
D It decreases crop yield.
Answer: Answer is A it will decrease soil erosion
Explanation:it just will trust me
Answer:
A.
Explanation:
the soil will not loosen when u till it
Using this illustration, what is the chemical formula? Picture and possible answers are below.
The answer is It is NH3.....
Pt2 science......
Select correct answer ♡!
If a lab requires you to use 1.25 mol oxygen gas in a chemical reaction, how many molecules of oxygen will you need?
Answer:
7.53*10²³ molecules of oxygen will you need.
Explanation:
Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) that can be found in the amount of one mole of said substance. Its value is 6.023*10²³ particles per mole. Avogadro's number applies to any substance.
You can then apply the following rule of three: if by definition of Avogadro's Number 1 mole of oxygen gas contains 6.023*10²³ molecules, 1.25 moles contains how many molecules?
[tex]amount of molecules=\frac{1.25 moles*6.023*10^{23}molecules }{1 mole}[/tex]
amount of molecules= 7.53*10²³
7.53*10²³ molecules of oxygen will you need.
what is modal class?
தமிழ் வாழ்க
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency.
Answer:
Modal means the one that occurs most often (averages: mode). In maths, the mode is one of the most common ways to describe a set of data. ... The modal class is, therefore, the group with the highest frequency. For example: if you counted the number of pencils in different pencil cases and you decided to group them.
Explanation:
தமிழன் ❤
An unknown amount of sodium azide (NaN3) reacts and produces 0.033 moles of nitrogen gas. What mass of sodium metal is produced
Answer:
Mass of sodium metal is 130.87 gram
Explanation:
The complete reaction is
2 NaN3 --> 2 Na + 3 N2
We know that PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
On substituting the given values, we get
[tex]n = \frac{\frac{99707}{101325}*75 }{0.082 *(273.15 +15)} \\n = 3.02[/tex]moles of N2
Sodium azide's molar mass
3.02 *(2/3) = 2.013 moles
Mass = 2.03 * 65.01 = 130.87 gram
What is the molarity of .65 L of solution containing 63 grams of NaCl? (dont forget to convert grams to moles)
Answer:
1.66 M
Explanation:
Molarity = moles/L solution
We have the following data:
mass NaCl = m = 63 g
volume of solution = V = 0.65 L
Thus, we first convert the mass to moles with the molar mass of NaCl (MM):
MM(NaCl) = 23 g/mol Na + 35.4 g/mol Cl = 58.4 g/mol
moles NaCl = m/MM = 63 g/(58.4 g/mol)= 1.08 mol
Finally, we divide the moles into the volume of solution to calculate the molarity:
M = moles NaCl/V = 1.66 mol/L
A student adds 5400.0mL of 0.15M NaOH to 201.2mL of 4.0M NaOH. What is the final [NaOH]?
Answer:
0.287 M
Explanation:
Multiply the concentration of each solution by the volume of each (in liters) to get the moles of NaOH in that solution.
0.15 M • 5.4000 L = 0.81 mol NaOH
4.0 M • 0.2012 L = 0.80 mol NaOH
Add the mol of NaOH together to get the total --> 0.81 + 0.80 = 1.61 mol NaOH
Divide by the total volume of solution (5400.0 mL + 201.2 mL = 5,601.2 mL = 5.6012 L)
1.61 mol / 5.6012 L = 0.287 M NaOH
Weathering (breaking off sediments upriver), erosion (moving the sediments down river) and finally deposition caused the changes in the river.
What helps hold sediments in place to prevent erosion?
Answer:
Explanation:
Maintaining a healthy, perennial plant cover.
Mulching.
Planting a cover crop – such as winter rye in vegetable gardens. ...
Placing crushed stone, wood chips, and other similar materials in heavily used areas where vegetation is hard to establish and maintain.???
Select the correct answer.
How does the equilibrium change with the removal of hydrogen (H2) gas from this equation?
2H2S ⇌ 2H2(g) + S2(g)
A.
Equilibrium shifts right to produce more product.
B.
Equilibrium shifts left to produce more reactant.
C.
Equilibrium shifts right to produce less product.
D.
Equilibrium shifts left to produce less reactant.
Answer:
the guy above is wrong
Explanation:
i just did the test and got it wrong
Please someone help me and all of the terms do not have to eh used
Answer:
The correct answer is -
1. D. mold
2. A. Cast
3. F. trace fossil
4. C. original material fossils
5. B. fossil record.
Explanation:
Mold is the impression of an organism in a rock that occurs due to the complete dissolving of the organism and only an impression left in sedimentary rocks.
The cast is a fossil copy of an organism in a rock that takes place when water-containing minerals fill the molds and creates a three-dimension copy of the fossil.
Trace fossils are the fossils that are preserved in such a manner that records of biological activity stored only instead of remains of plants or animals.
Storing originals animals or parts of the remaining such as tissue of an organism in natural form is known as original-material fossils.
Fossil records are the fossils ever found or discovered on the earth.
WHAT INVESTMENT OF A $125 WOULD HAVE THE MOST LASTING VALUE FOR YOUR FUTURE?
A pair of jordans
Some nice cologne or perfume
3 college credits at MCC BAG
a dinner with 2 or 3 people
Answer:
a pair of jordans
Explanation:
How much water must be added to 40.0 g of CaCl2 to produce a solution that is 35.0 wt% CaCl2?
The mass of water present in the solution is 21.5 g.
What is concentration?Concentration refers to the amount of solute in a solution. There are various ways of expressing concentration such as;
Molar concentrationMass concentrationPercentage concentrationWe have the following information;
Percent concentration = 35.0 %
mass of solute = 40.0 g
Mass of water = ?
So;
35 = x/40 + x × 100/1
35 = 100x/40 + x
35(40 + x) = 100x
1400 + 35x = 100x
1400 = 100x - 35x
1400 = 65x
x = 1400/65
x = 21.5 g
Hence the mass of water is 21.5 g.
Learn more about percent concentration: https://brainly.com/question/1600559
Which of these is a learned behavior of a dog?
1.Begging for food
2.Drinking water
3.Panting on a hot day
4.Chewing on a bone
Describe the different energy levels of electrons in an atom.
Answer:
Explanation:
If it is at a higher energy level, it is said to be excited, or any electrons that have higher energy than the ground state are excited. They are then called degenerate energy levels.
PLEASE ME!!!! ANSWER IF YOU KNOW THE ANSWER
Answer:
organism 1
Explanation:
the arrow points away from it so that means that it is being eaten and it always starts from a producer so organism 1 is likely a producer :)
10. Air is a homogenous mixture of gases. Oxygen is 20% by volume of air typically. What
amount of moles of oxygen is present in 20 L of air at STP?
Answer:
893 moles
Explanation:
An ideal gas at STP occupies 22.4 liters. Calculating Oxygen as if it were an ideal gas there are . 893 moles of Oxygen in 20.0 liters.
a substance made up of only atoms of one type is called
Answer: chemical element
Explanation: A chemical element is a substance that contains only one type of atom, which is the smallest particle of an element.
can somebody explain two dimensional gas chromatography in arson investigation
Answer:
Comprehensive Two-dimensional gas chromatography, or GCxGC is a multidimensional gas
Determine which molecule in each pair has the stronger intermolecular forces. Explain why. The main reason that NH3 has [ Select ] intermolecular forces than CH4 is that NH3 [ Select ] . The main reason that NO2 has [ Select ] intermolecular forces than CO2 is that NO2 [ Select ] . The main reason that CS2 has [ Select ] intermolecular forces than CO2 is that CS2 [ Select ] .
Answer:
See explanation
Explanation:
As for NH3 and CH4, the former is a polar molecule and possess a dipole. Hence, in addition to dispersion forces, dipole-dipole interaction as well as hydrogen bonding creates a stronger intermolecular interaction than in nonpolar CH4 where only dispersion forces are in operation.
Between NO2 and CO2, the former possesses a dipole moment while the later does not. As a result of that, dipole interaction are in operation in NO2 while only dispersion forces are n operation in CO2.
Between CO2 and CS2, the both molecules are nonpolar but CS2 has a greater molecular mass than CO2. Recall that the greater the molecular mass of a substance the greater its magnitude of intermolecular forces.
Taking into account the intermolecular forces, you get that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Intermolecular forces or bonds are those interactions that hold molecules together. These are electrostatic forces.
Van der Waals forces are weak attractions that hold electrically neutral molecules together. At some point these molecules present an induced dipole, that is, the molecule acquires a partially positive and a partially negative charge momentarily, causing them to attract each other. They are Van de Waals forces: Dipole - Dipole Forces, London Forces, Ion - Dipole Forces.
London Dispersion Forces: occurs between nonpolar molecules due to the movement of electrons. At some point there are more electrons to one side, which, being close to another atom or molecule, the electrons of the second are repelled, originating two instantaneous dipoles, which originate an attractive force. In summary, this type of force occurs because when two molecules approach, a distortion of the electronic clouds of both is originated, generating in them, transient induced dipoles, due to the movement of the electrons, thus allowing them to interact with each other. They are very weak forces.Ion-ion forces: It is the attraction between two ions of different charges: cations (positively charged ion) and anions (negatively charged ion). That is, it occurs between different charged molecules that will tend to form an electrostatic bond between the ends of opposite charges due to the attraction between them.Ion-dipole forces: these are forces of attraction between an ion (an atom that has lost or gained an electron, so it has a charge) and a polar molecule. A molecule is a dipole when there is an asymmetric distribution of electrons because the molecule is made up of atoms of different electronegativity. The ion then binds to the part of the molecule that has its opposite charge: the positive end of the polar molecule is oriented towards the anion (negatively charged ion) and the negative end of the polar molecule is oriented towards the cation ( positively charged ion).Dipole-dipole forces: dipole-dipole forces are forces of attraction between polar molecules. These molecules attract when the positive end of one of them is close to the negative of the other.Hydrogen bonds: they are a type of dipole-dipole force. In this interaction, a molecule that presents hydrogen interacts with another that presents an atom with high electronegativity, such as oxygen, fluorine or nitrogen (O, F, N). In this way, between the hydrogen, which has a low electronegativity and the electronegative atom, an interaction is established, due to their opposite charges.The relative order of magnitude of the intermolecular forces is:
Ion-ion forces> Ion-dipole forces> Hydrogen bonds> Dipole-dipole forces> London Dispersion Forces
Taking into account all the above, it can be said that:
The main reason that NH₃ has weaker intermolecular forces than CH₄ is that NH₃, being nonpolar, possesses London Dispersion Forces, while CH₄ possesses the Hydrogen Bonding forces.The main reason that NO₂ has the same intermolecular forces than CO₂ is that in NO₂ and CO₂ there are London forces because they are nonpolar molecules. The main reason that CS₂ has the same intermolecular forces than CO₂ is that CS₂ in CS₂ and CO₂ there are London forces because they are nonpolar molecules.Learn more:
https://brainly.com/question/17111432?referrer=searchResultshttps://brainly.com/question/14220340?referrer=searchResultsA 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 24
Answer:
There are 0.311 moles of gas in the tank
Explanation:
Complete question
A 4.00g sample of gas is found to exert a pressure of 1.71 atm when confined in 3.60L container at a temperature of 241 K. Find the number of moles of the gas
Solution
As we know
[tex]PV = nRT[/tex]
where P is the pressure of the gas in atm
V is the volume in liters
n is the number of moles
R is the gas constant = 0.08206 L·atm/K·mol
and T is the temperature in Kelvin
Substituting the given values in above equation, we get -
[tex]1.71 * 3.60 = n * 0.08206 * 241\\n = 0.311[/tex]
There are 0.311 moles of gas in the tank
What do plants do that requires Energy?
Answer:
Photosynthesis
Explanation:
Photosynthesis uses energy from light to convert water and carbon dioxide molecules into glucose (sugar molecule) and oxygen. The oxygen is released, or “exhaled”, from leaves while the energy contained within glucose molecules is used throughout the plant for growth, flower formation, and fruit development.
The results of photosynthesis as glucose and oxygen
A) Photosynthesis
B)Products
C)Chloroplasts
D)Glucose
Answer:
Products
Explanation:
which reacts faster, rock salt or grains of salt? Why?
Answer:
salt
Explanation:
because it has a much larger volume ratio
CH3(ch2)2C(ch3)3 IUPAC name please?
Answer:
Explanation:
The name is of the compound is 3,3,4,4-tetramethylhexane.