Answer:
0.9248kPa
Explanation:
We are to convert from torr to kPa;
To solve this problem, more appropriately the conversion process is from:
torr to Pa and then kPa
These are units of pressure;
1 torr = 1Pa
So;
924.8torr is the same as 924.8Pa
1000Pa = 1kPa
924.8Pa = [tex]\frac{924.8}{1000}[/tex] = 0.9248kPa
20 POINTS! SAVE ME PLS!
Which ion below is fluorine most like to form? A) F+1 B) F+2 C) F-1 D) F-2
20 POINTS PLS SAVE ME!!!!
If an element is a metal, is it more likely to ________ its valence electrons when it bonds. When it does that, it will become _________.
A. add to, a cation
B. lose, an anion
C. add to, an anion
D. lose, a cation
Answer:
Uhhh d ?
Explanation:
Prepare 800 mL of 2M sodium chloride. How many grams of NaCl needs to be dissolve in a 800 mL distilled water?
Answer:
93.6 g of NaCl.
Explanation:
We'll begin by converting 800 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
800 mL = 800 mL × 1 L / 1000 mL
800 mL = 0.8 L
Next, we shall determine the number of mole of NaCl in the solution. This can be obtained as follow:
Molarity = 2 M
Volume = 0.8 L
Mole of NaCl =?
Molarity = mole / Volume
2 = mole of NaCl / 0.8
Cross multiply
Mole of NaCl = 2 × 0.8
Mole of NaCl = 1.6 moles
Finally, we shall determine the mass of NaCl needed to prepare the solution. This can be obtained as follow:
Mole of NaCl = 1.6 moles
Molar mass of NaCl = 23 + 35.5
= 58.5 g/mol
Mass of NaCl =?
Mole = mass /Molar mass
1.6 = Mass of NaCl / 58.5
Cross multiply
Mass of NaCl = 1.6 × 58.5
Mass of NaCl = 93.6 g
Therefore, 93.6 g of NaCl is needed.
93,6 grams of NaCl is needed to prepare a 800ml of 2M sodium chloride.
Molar concentrationIn a 2M solution, there are 2 moles of the substance per 1 liter, that is, in 800 ml we have:
[tex]\frac{2 mol}{x mol} =\frac{1000 ml}{800ml}[/tex]
[tex]x = 1.6 mol[/tex]
Thus, 1.6 mol of NaCl is needed to prepare the solution.
Mass calculationTo calculate the mass in an amount of moles, we use the molar mass, so that:
[tex]MM_{NaCl}= 58.5g/mol[/tex]
[tex]m = MM \times mol[/tex]
[tex]m = 58.5 \times 1.6[/tex]
[tex]m = 93.6g[/tex]
So, 93,6 grams of NaCl is needed to prepare a 800ml of 2M sodium chloride.
Learn more about mole calculation in: brainly.com/question/2845237
helppp nowwww plsss
Answer:
The answer is number 2.
Explanation:
How many moles are there in 36.0 grams of water?
Answer:
There are 4 moles of hydrogen atoms in 36 grams of water,
Explanation:
When a real gas is placed into a container at high pressure, why might the pressure of the gas be higher than what was predicted by the ideal gas law?
Answer:The correct answer is A.
Explanation:Properties of ideal gases have different volumes under very high pressure. These gases take up additional volume when there is high pressure exerted, and the predicted volume of these gases will end up being smaller than the actual values of the gas volumes. Therefore, the true volume of the gases will be higher than the low ones that were predicted, giving your answer A.
Convert 2.345 centimeters cubed to inches cubed. 1inch = 2.54cm
Answer:
0.92322835
Explanation:
0.92322835 rounded= 0.9 or 0.92
2.345 centimeters cubed is equal to 0.1431 inches cubed.
Units of volume are used to measure the amount of space occupied by an object or substance. Volume is a three-dimensional quantity and is typically expressed in cubic units. Some common units of volume include:
Cubic Meter (m³): This is the SI unit of volume and represents the volume of a cube with sides measuring one meter.Cubic Centimeter (cm³): This is a smaller unit of volume often used for measuring the volume of small objects or substances. It is equal to the volume of a cube with sides measuring one centimeter.Liter (L): The liter is a commonly used unit of volume in everyday life. It is equal to one cubic decimeter or 1,000 cubic centimeters.Milliliter (mL): The milliliter is a smaller unit of volume often used for measuring liquids or small quantities. It is equal to one-thousandth of a liter or one cubic centimeter.Other units of volume, such as gallons, cubic feet, and ounces, are also used in specific contexts or regions. It is important to use appropriate conversion factors when converting between different units of volume.
1 inch = 2.54 cm.
1 cm = 1/2.54 inches
(1 cm)³ = (1/2.54 inches)³
1 cm³ = (1/2.54)³ inches³
2.345 cm³ = 2.345 × [(1/2.54)³] inches³
2.345 cm³ ≈ 0.1431 inches³ (rounded to four decimal places)
Learn more about Units of volume, here:
https://brainly.com/question/8101354
#SPJ2
Which of the following correctly describes molecules of two different gases if they are at the same temperature and pressure?
CA. They must have the same mass.
CB. They must have the same velocity
CC. They must have the same average kinetic energy
CD. They must have the same average potential energy
Answer: C. They must have the same average kinetic energy.
Explanation: I got it right
How many grams are contained in 19.7 moles of Copper (III) Hydroxide?
Answer:
1912.1893280000002 or rounded to the nearest tenth is, 1912.19
Explanation:
How many grams are in 2.2 moles of sodium hydroxide (NaOH)?
Answer:
1 mole is equal to 1 moles NaOH, or 39.99711 grams.
(( hoped this helped ))
Answer:
1 mole is equal to 1 moles Sodium Hydroxide, or 39.99711 grams. Note that rounding errors may occur, so always check the results.
2H2O = 2H2 +O2
If 30mL of hydrogen are produced in above reaction, how many mL of oxygen are produced? Please show work.
Answer:
15 mL of O₂.
Explanation:
The balanced equation for the reaction is given below:
2H₂O —> 2H₂ + O₂
From the balanced equation above,
2 mL of H₂O reacted to produce 2 mL of H₂ and 1 mL of O₂.
Next, we shall determine the volume of H₂O needed to produce 30 mL of H₂. This can be obtained as follow:
From the balanced equation above,
2 mL of H₂O reacted to produce 2 mL of H₂.
Therefore, 30 mL of H₂O will also react to produce 30 mL of H₂.
Thus, 30 mL of H₂O is needed for the reaction.
Finally, we shall determine the volume of O₂ produced from the reaction. This can be obtained as follow:
From the balanced equation above,
2 mL of H₂O reacted to produce 1 mL of O₂.
Therefore, 30 mL of H₂O will react to produce = (30 × 1)/2 = 30/2 = 15 mL of O₂.
Thus, 15 mL of O₂ were produced from the reaction.
lithium sulfate + magnesium nitrate =
Answer:
Magnesium Sulfate + Lithium Nitrate
Explanation:
Magnesium Nitrate + Lithium Sulfate = Magnesium Sulfate + Lithium Nitrate.
The complete word equation for this reaction is:
lithium sulfate + magnesium nitrate = lithium nitrate+ magnesium sulfate
Balanced chemical reaction:When lithium sulfate reacts with magnesium nitrate, lithium nitrate and magnesium sulfate are formed. This type of reaction is also known as a double displacement reaction. In this type of reactions ions of the salts get exchanged to form the new salts.
Word equation:
lithium sulfate + magnesium nitrate = lithium nitrate+ magnesium sulfate
Chemical equation:
[tex]Li_2SO_4+ MgNO_3---- > LiNO_3+ MgSO_4[/tex]
Find more information about chemical reaction here:
brainly.com/question/16416932
convert 2.39 x 1022 molecules of water into moles of water
Answer:
[tex]0.0397\ \text{mol}[/tex]
Explanation:
Number of molecules of water = [tex]2.39\times 10^{22}[/tex]
[tex]N_A[/tex] = Avogadro's number = [tex]6.022\times 10^{23}\ \text{mol}^{-1}[/tex]
Number of moles is given by
[tex]\dfrac{2.39\times 10^{22}}{6.022\times 10^{23}}[/tex]
[tex]=0.0397\ \text{mol}[/tex]
The number of moles of water is [tex]0.0397\ \text{mol}[/tex].
NEED QUICK
According to the Periodic Table, the properties of calcium are most like.
1. manganese
2. magnesium
Answer: 2. magnesium
Explanation: correct spelling...?
Convert 4.56 g/ml to lb-fl-oz
Answer:
g-lb 0.01005308
ml-fl Oz 0.1541919
The value of 4.56 g/mL is 0.296 lb/fl-oz.
Explanation:
Given:
The density with 4.56 g/mL
To find:
Convert 4.56 g/ml to lb/fl-oz
Solution:
In 1 pound there are 453.592 grams:
[tex]1 pound = 453.592 grams\\1 grams=\frac{1}{453.592 } pounds\\4.56 g/mL=4.56\times\frac{1}{ 453.592} lb/mL\\=0.0100 lb/mL[/tex]
In 1 fluid ounce there are 29.5735 milliliters:
[tex]1 \text{fluid ounce} = 29.5735 milliliter\\1 mL=\frac{1}{29.5735} fl-oz\\0.0100 lb/mL=\frac{0.0100}{\frac{1}{29.5735}} lb/fl-oz\\0.0100 lb/mL=0.0100 \times\frac{29.5735}{1} lb/fl-oz\\=0.296 lb/fl-oz[/tex]
The value of 4.56 g/mL is 0.296 lb/fl-oz.
Learn more about conversions here:
brainly.com/question/17743460
brainly.com/question/24530464
Given the Punnett Square above, with Y=dominant yellow allele and y= recessive green allele, what is the probability of an offspring plant having a green phenotype?
Question 5 options:
25% green phenotype
50% green phenotype
75% green phenotype
100% green phenotype
Answer:
50 percent
Explanation:
Considering one heterozygous parent and a homo-zygous recessive parent, the probability of an offspring plant having a green (recessive) phenotype is 50 percent (50%).
What is a Punnett square?A Punnet square is a diagram used to represent the gametic combination that will give rise to a given genotype/phenotype.
In this case, one parent is heterozygous (genotype Yy, carrier of the recessive allele), whereas the other parent is recessive homo-zygous (genotype yy).Here, the Punnett square is equal to:Y y
y 1/4 Yy 1/4 yy
y 1/4 Yy 1/4 yy
In conclusion, considering one heterozygous parent and a homo-zygous recessive parent, the probability of an offspring plant having a green (recessive) phenotype is 50 percent (50%).
Learn more in:
https://brainly.com/question/3522181
5. As a sample of matter is heated, its particles *
O A are unaffected
O B. move more quickly
O C. move more slowly
D. stop moving
Answer:
B. move more quickly
Explanation:
As a sample of matter is heated, we know that the particles begins to move more quickly.
This is because the temperature of a substance is directly proportional to the average kinetic energy of a system.
As the temperature increases, the body gains more kinetic energyThis is translated to the particles of the medium. Then they begin to move quickly and very fast enough.How has the human population changed during the past 50 years
Answer:
The human population has increased by the billions, and we have been creating better and more complex technology over the years. So, overall there is a difference between now and 50 years ago.
Why water is able to stick to the side of a glass
Answer:
Water uses adhesive forces that allow it to stick to certain surfaces such as glass.
Explanation:
When the angle between vertical direction and the glass wall is small, surface tension is stronger and the component of gravity perpendicular to the glass wall is small. The result of this causes water to stick to the side of a glass.
Hope this helps!
Question Determine the concentration of hydroxide ions for a 25 °C solution with a pH of 8.22. . Your answer should contain 2 significant figures.
Answer:
[tex][OH^-]=1.7x10^{-6}M[/tex]
Explanation:
Hello!
In this case, since the pOH of a solution can be computed when knowing the pH as shown below:
[tex]pH+pOH=14\\\\pOH=14-8.22=5.78[/tex]
And therefore, the concentration of hydroxide ions based on the definition of pH:
[tex][OH^-]=10^{-pOH}[/tex]
In such a way, we obtain:
[tex][OH^-]=10^{-5.78}=1.7x10^{-6}M[/tex]
Best regards
Please help!!!!!!!!
Alyssa has four different subjects oil water sand and air. she would like to fill four Identical balloons with these materials until all of the balloons have the same mass. Which balloon would take up the most space
Answer:
air
Explanation:
The material that will take up the most space is air. Air and most gases have no definite volume.
They simply take up shape and volume of any medium they are introduced into.
The attribute of no fixed shape and volume sets gases apart from other matter. The air will fill the entire space of the balloon and it will have the most volume. Oil, water and sand have fixed volume that is predetermined.Answer:
Air
Explanation:
The material that will take up the most space is air. Air and most gases have no definite volume.
They simply take up shape and volume of any medium they are introduced into.
The attribute of no fixed shape and volume sets gases apart from other matter.
The air will fill the entire space of the balloon and it will have the most volume.
Oil, water and sand have fixed volume that is predetermined.
A weather balloon contains 59.5 L of helium at sea level, where the atmospheric pressure is 1 atm. The balloon is released from a 4000m mountain top where the pressure is 0.609atm. What is the volume of the balloon when it is released?
Answer:
97.7 L
I found the answer on some website and I got it right after turning it in.
So I’m in science and it says “The three major areas of professional careers are I have no idea what to put can somebody please help me
Answer:
I’m getting 1 hour and 50 minutes
Explanation:
Answer:
its Teaching, research, design.
Explanation:
hope this helps :)
A substance that loses electron and itself is oxidized is called a?
Answer:
oxidation-reduction or redox reaction
Explanation:
n
How many grams of aluminum in required to produce 17.5 g of hydrogen
Mass of Aluminum = 157.5 g
Further explanationGiven
17.5 g of Hydrogen
Required
Mass of Aluminum
Solution
Reaction
2Al + 3H₂SO₄ → Al₂(SO₄)₃ + 3H₂
mol Hydrogen :
= mass : molar mass
= 17.5 g : 2 g/mol
= 8.75
From the equation, mol Al :
= 2/3 x mol H₂
= 2/3 x 8.75
= 5.83
Mass Al :
= 5.83 x 27 g/mol
= 157.5 g
How many grams of ethanedioic acid is required to prepare 2M solution of the NaOH
Answer:
I don't know
Explanation:
kahit Hindi ko alam
Silver is the metal with the highest conductivity, followed by copper, gold and aluminium. Why do you think copper and aluminium are used for electrical wire and cable rather than silver and gold?
Explanation:
Copper and aluminum are used for electric wires and cables because they are readily available and cheaper to produce.
The abundance of copper and aluminum is higher compared to silver and gold.
This makes the metals easier to mine than silver and gold. It would be impossible to use the scare amount of gold and silver to make electric wires and cables.
This use cannot be sustained.
Select all of the ways collection areas use to gain water. precipitation falls direction into the collection area runoff from precipitation water evaporates from the collection area
"Precipitation falls direction into the collection area" and "runoff from precipitation" are the correct ways.
Ways of collecting waterThe ways such as "Precipitation falls direction into the collection area" and "runoff from precipitation" through which collection areas use to gain water because these two activities bring water to the collection areas
While on the other hand, "water evaporates from the collection area" is the activity which removes water from the collection area so we can conclude that "Precipitation falls direction into the collection area" and "runoff from precipitation" are the correct ways.
Learn more about precipitation here: https://brainly.com/question/866725
The analysis of data leads to _____.
A. theories
B. variables
C. hypotheses
D. conclusions
Answer: D, Conclusions
Explanation: Gradpoint
Calculate the mass of iron (iii) oxide that contains a trillion iron atoms
Answer:
Calculate the mass of iron(III) oxide (Fe20) that contains a trillion (1.000x 10") oxygen atoms. Be sure your answer has a unit symbol if necessary, and round it to 4 significant digits. A chemist measures the amount of oxygen gas produced during an experiment. He finds that 9.2 g of oxygen gas is produced.
Explanation: