Answer:Okay, so first, let's turn the grams into moles.
1.3 g C / 12.011 g/mol = 0.1082341187 mol C
Next, we need to multiply it by Avogadro's Number for the number of atoms.
0.1082341187 mol C * 6.022*10^23 mol^-1 = 6.51785863*10^22 atoms C
Now we take significant figures into consideration. We started with two, so we need to end it with two.
6.5*10^22 atoms C
Explanation:
______________- the layers of soil. More mature (older) soils have more of these layers
fill in the blank please
I am not sure why your teacher isn't asking for the layers, but here is the list of layers;
A -(topsoil) Mostly minerals from parent material with organic matter incorporated. A good material for plants and other organisms to live.
E - (eluviated) - Leached of clay, minerals, and organic matter, leaving a concentration of sand and silt particles of quartz or other resistant materials – missing in some soils but often found in older soils and forest soils.
B - (subsoil) Rich in minerals that leached (moved down) from the A or E horizons and accumulated here.
C - (parent material) The deposit at Earth’s surface from which the soil developed.
R - (bedrock) A mass of rock such as granite, basalt, quartzite, limestone or sandstone that forms the parent material for some soils – if the bedrock is close enough to the surface to weather. This is not soil and is located under the C horizon.
Explain why Ra is larger than Be. With 2 points.
Explanation:
Radium(Ra)=>atomic number=88
BERYLLIUM (Be)=>atomic number =4
why is Ra larger than Be
1. since the atomic number of Ra is greater than Be, the number of electrons is more, which means there are more number of shells present in Ra than Be. (atomic Radius)2. the more the valence electron (excluding fully filled ones) the less is the nuclear attraction forcesince Ra has more valence electron in its outermost shell, the nuclear attraction force is less which means that Ra 's size is greater than Be.hope it helps:)
what is the chemical equation for this?
Answer:
J
Explanation:
Chlorine Gas is Cl2 so if it isnt on the left as that its wrong.
Then on the products see that Fe III means Fe is +3 charge so we have to have 3 Cl to balance it to 0 since each cl as -1 charge.
FInally check if the equation is balanced J is maybe H but its to blurry to tell
_Fe +_02 → _Fe2O3
Answer:4,3,2
Answer:
4Fe+3O2------>2fe2O3
Explanation:
please follow me
and sa thanks for my answer
What THREE organisms use photosynthesis?
Answer:
Plants, bacteria, and algae
Explanation: Plants are known to gather food from the sun, algae is a type of plant, and bacteria gather food from the sun while they are in the air.
Explain why, in a balanced chemical equation C + O2 CO2, we know that 1 gram of C will not react exactly with 1 gram of O2.
Answer:
See the answer below
Explanation:
From the equation, 1 mole of C requires 1 mole of O2 for a balanced reaction.
1 g of C will not exactly react with 1 g of O2 because the 1 g of each of the reactants contain different amounts of the substance.
The amount (in moles) of a substance is the mass of that substance divided by the molar mass.
Hence, 1 g of C will contain 1/12 moles of the substance while 1 g of O2 will contain 1/32 moles of the substance.
2 points
Al + HCI—_AICI:
+_H2
Synthesis
Decomposition
Single Replacement
Double Replacement
Combustion
PLEASE HELP CHEMITRY!
What happens to the binding energy of lighter elements when they undergo fusion?
What is the most stable nucleus (the one with the highest binding energy)?
What happens to the binding energy of elements like uranium when they undergo fission?
Why does the fusion of elements beyond iron in our universe require a supernova? Use this diagram to explain your answer.
Answer:
.
Explanation:
Answer:
1) In fusion reactions, two light atomic nuclei fuse together to form a heavier nucleus. In doing so, they release a comparatively large amount of energy that arises from the binding energy, creating an increase in temperature of the reactants.
2) iron-56
3) When a large, fissile atomic nucleus such as uranium-235 or plutonium-239 absorbs a neutron, it may undergo nuclear fission. However, one neutron does collide with an atom of uranium-235, which then splits and releases two neutrons and more binding energy.
4) Iron cannot release energy by fusion because it requires a larger input of energy than it releases. This energy blows the outer layers of the star off into space in a giant explosion called a supernova (plural: supernovae.)
have you tried G o o g l e
HELP NEEDED ASAP
What mass of Al is produced when 0.500 mole of Al2 S3 is completely reduced with excess H2? (At. Masses of Al=27, S=32, H=1)
Select one:
a. 13.5 g
b. 27.0 g
c. 2.7 g
d. 54.0 g
The name for TiSO5 is
Answer:
Titanium oxide sulphate
Explanation:
Why is it so important to use more than just fossil fuels for our energy sources?
Answer:
Fossil fuels are non-renewable which means that they wont last forever and they contribute largely to unnatural climate change.
Explanation:
Complete Symbols
Find each of these:
a) number of protons
b) number of neutrons
c) number of electrons
d) atomic number
e) mass Number
80Br35
Answer: a) 35 , b) 45 , c) 35 , d) 35 , e) 80
Explanation:
a) - protons equal to atomic number of element , b) - subtract atomic number by number of protons to get neutrons (80 - 35 = 45) , c) - protons same as electrons unless its an ion , d) - atomic number is equal to protons , e) - protons plus neutrons equal mass number (35 + 45 = 80). :)
the pH of a solution of a is increased from 2 to 3 then the concentration of h + ions will become
Answer:
The H+ concentration would decrease by 10 fold. From .01 to .001
Explanation:
This is due to how a pH of 2 is expressed in scientific notation as 10^-2 power when referring to H+ concentration so a pH of 3 would be 10^-3. Hence it would be 10 times smaller in concentration as the power increases to the negative power the smaller the concentration becomes.
The name for the ionic compound CoHPO4
Answer:
Dicalcium phosphate. (I'm sure meant for the "o" to be an "a" for Calcium).
Explanation:
I hope this helps! :D Have a nice night!
How does altitude affect the freezing, melting, and boiling points of water?
Answer:
At higher altitudes, air pressure is lower. When atmospheric pressure is lower, such as at a higher altitude, it takes less energy to bring water to the boiling point. Less energy means less heat, which means water will boil at a lower temperature at a higher altitude.
In an ordinary container (exposed to atmospheric pressure). The freezing point will increase with altitude (and corresponding decrease in atmospheric pressure), but the difference is very slight.
Explanation:
When at a higher altitude , the atmospheric pressure is usually low and it
requires lesser amount of energy for the water to reach its boiling point. This
means that at higher altitudes , water boils at a lower temperature.
The freezing point of water increases with a higher altitude. This means that
water freezes at a higher temperature although the difference is very small.
The low pressure present in higher altitudes increases the melting point of
water(ice)
Read more about Water here https://brainly.com/question/13354891
Write the names of the following covalent compounds: no2
Answer:
nitrogen dioxide
Explanation:
this was on my chemistry test
calculate the percentage of iron in iron (III) sulphate
Answer:
28.01 percent
Explanation:
Iron (III) sulphate, [tex]Fe_2(SO_4)_3[/tex], has 2 atoms of Fe.
One atom of Fe has a molar weight of 56. Hence, 2 atoms of Fe would have a total molar weight of 56 x 2 = 112 g/mol
Molar weight of [tex]Fe_2(SO_4)_3[/tex] = 399.88 g/mol
Percentage Fe in [tex]Fe_2(SO_4)_3[/tex] = 112/399.88 x 100%
= 28.01%
The percentage of iron is iron (III) sulphate is, therefore, 28.01 percent.
If I have a 30,000 mL container that holds 65 moles of gas at a temperature of 205 degrees Celsius, what is the pressure inside the container?
Answer:
85.384 atm or 64608.13086 mmHg
Explanation:
PV= NRT
P= NRT/V
n= mols
R= gas constant (i used .0821 for atm)
T= Temp in Kelvins (Celsius degrees + 273)
V= in L
(65molsx480kx.0821)/30L
Which particles are referred to as nucleons (subatomic particles located in the nucleus)?
Answer:
protons and neutrons
Explanation:
The protons have a positive electrical charge and the neutrons have no electrical charge. A third type of subatomic particle, electrons, move around the nucleus. The electrons have a negative electrical charge
Match each type of mass movement to its description.
the rapid downhill flow of a mixture of rock,
soil, and water
slump
mudflow
the slow downhill movement of rock and soil
creep
the rapid downhill movement of a mass of
rock, debris, or soil
landslide
a loosely connected mass of rock and soil
that moves a short distance
Answer: np
Explanation:
Correctly matched are :
landside - rapid movement of rock, debris, and soil. mudflow - mixture of rocks, soil, water. slump - loosely mass of rocks and soil.What is a landslide?A landslide is also called a land slip. It refers to several forms of mass wasting and may include a wide range of ground movements. They occur in a variety of environments characterize by gentle and steep slope gradients.
The mudflow is a mixture of rocks and soil along with water. While a creep is a slow downloads movement of rocks and soil.
Find out more information about the mass movement.
brainly.com/question/6068732
Describe the Electromagnetic spectrum. Which waves have most/least energy? List the colors in the visible spectrum from weakest to strongest.
A pH of 1 there are a lot of ______ in a solution. 2.A pH of 14 there are a lot of ______ in a solution.
Answer:
Hydrogen or hydroxonium ions in the solution
Hydroxyl ions in the solution
Explanation:
A pH of 1 shows there is a lot of hydroxonium ions in the solution and a pH of 14 shows there is a lot of hydroxyl ions in the solution.
The pH scale ranges from 1 to 14 As the values tends towards 1, the acidity increases due to concentration of hydroxonium ions in the solution. As the pH tends towards 14, the basicity increases due to the concentration of hydrogen ions in the solution.Which chemicals are reactants?
0: NH₃ + 0 02
0:02 0: N2 + 0:420
A. NH3 and O2
B. O, and H2O
C. N, and H2O
D. NH3 and N2
Calculate the mass of 1.25 mol ammonium sulfide, (NH4)2S. *
Answer:
85g
Explanation:
To convert the moles of a substance to grams we need to know the molar mass of the substance. We, as first, must obtain the molar mass of (NH₄)₂S as follows:
There are 2 atoms of N, 8 of H and 1 of S:
N = 2*14g/mol = 28g/mol
H = 8*1g/mol = 8g/mol
S = 1*32g/mol = 32g/mol
Molar mass: 68g/mol
That means 1 mole of (NH₄)₂S has a mass of 68g.
1.25moles have a mass of:
1.25moles * (68g/mol) =
85gElena makes the table below to determine the number of atoms of each element in the chemical formula 3(NH4)2SO4. A table with 3 columns and 4 rows. The first column labeled element has entries nitrogen, hydrogen, sulfur, oxygen. The second column labeled calculation has entries 1 times 2 times 3 , 4 times 2 times 3, 1 times 4 times 3, 4 times 3. The third column labeled total atoms has entries 6, 24, 12, 12. What mistake did Elena make? She should not have multiplied the sulfur atoms by the subscript 4. She should not have multiplied the nitrogen atoms by the subscript 2. She should not have multiplied the oxygen atoms by the coefficient 3. She should not have multiplied the hydrogen atoms by the coefficient 3.
Answer:
c
Explanation:
because i got 100 on the quiz
Answer: A) She should not have multiplied the sulfur atoms by the subscript 4
Explanation: got an 100 on the quiz:)
halogenation of propane
Answer:
The halogenation of propane discloses an interesting feature of these reactions. All the hydrogens in a complex alkane do not exhibit equal reactivity. For example, propane has eight hydrogens, six of them being structurally equivalent primary, and the other two being secondary
How many moles of Ba(NO3)2 are there in 0.25 L of a 2.00 M Ba(NO3)2 solution?
Use Molarity equals StartFraction moles of solute over liters of solution EndFraction..
0.13 mol
0.50 mol
2.25 mol
8.0 mol
Answer:
0.5moles
Explanation:
Given parameters:
Volume of solution= 0.25L
Molarity of solution = 2.00M
Unknown:
Number of moles = ?
Solution:
To solve this problem;
Molarity is the number of moles of solute in a given volume of solution, so
Number of moles = molarity x volume
Now insert the parameters and solve;
Number of moles = 0.25 x 2 = 0.5moles
Answer:
b
Explanation:
got it right on test
How many valence electrons does antimony have
In a solid, the particles..
A. Vibrate in place
B. Overcome the strong attraction
C. Slide past one another
D. Move freely
Write one equation each for the decomposition reactions where energy is supplied in the form of (a) electricity and
Answer:
Electrolysis of water
Explanation:
The electrolysis of water is a decomposition reaction in which electricity is used to break down a compound into simpler molecules.
Decomposition of water is carried out in the Hofman Voltameter.
This process is achieved by passing current through an acidified water.
The expression is given as:
2H₂O → 2H₂ + O₂