How is the atomic mass of an atom determined?​

Answers

Answer 1

Answer:

Atomic mass is defined as the number of protons and neutrons in an atom


Related Questions

Finding volume using displacement and calculating density

Answers

Answer:

a) 0.1

b) density = mass/volume

                 = 0.5 /0.1

                 = 5 kg/[tex]m^{3}[/tex]

A horizontal 52 Newton force is needed to slide a 50-kg box across a flat surface of a constant velocity of 3.5 m s what is the coefficient of kinetic friction between the box and the floor

Answers

Answer:

μk = 0.106

Explanation:

When the box is moving across the flat surface with a constant velocity, the force applied on it must be equal to the kinetic frictional force applied on the object:

F = μk*W = μk*mg

Where,

F = Force applied on box = 52 N

m = mass of box = 50 kg

g = 9.8 m/s²

μk = coefficient of kinetic friction between box and floor = ?

Therefore,

52 N  = μk(50 kg)(9.8 m/s²)

μk = (52 N)/(490 N)

μk = 0.106

The coefficient of kinetic friction between the box and the floor will be 0.106.

What is kinetic friction?

A force that acts among sliding parts is referred to as kinetic friction. A body moving on the surface is subjected to a force that opposes its progressive motion

The size of the force will be determined by the kinetic friction coefficient between the two materials.

The given data in the problem is;

μ is the coefficient of kinetic friction=?

m is the mass = 50 kg

g is the acceleration due to gravity= 9.81 m/s²

v is the speed =3.5 m/sec

Force(F)= 52 Newton

The formula for kinetic friction force is;

[tex]\rm F= \mu_k R \\\\ R=mg \\\\ F= \mu_k mg \\\\\ 52 = \mu_k \times 50 \times 9.81 \\\\ \mu_k = 0.106[/tex]

Hence,the coefficient of kinetic friction between the box and the floor will be 0.106.

To learn more about the kinetic friction refer to;

https://brainly.com/question/13754413

#SPJ5

Consider again the objects you ranked by distance. Suppose each object emitted a burst of light right now. Rank the objects from left to right based on the amount of time it would take this light to reach Earth, from longest time to shortest time.a. star on far side of Andromeda Galaxyb. star on near side of Andromeda Galaxyc. star on far side of Milky Way Galaxyd. star near center of Milky Way Galaxy1. Orion Nebula2. Alpha Centauri3. Pluto4. The Sun

Answers

Answer:

Following are the solution to this question:

Explanation:

That light takes a very long time to hit the planet, and the object is far off the earth. The light of such an item near to the planet takes less time to enter it. The star is 2,5 million light-years from the Planet on the far side of the Andromeda Galaxy. But on the other hand, the moon is 15 crore miles from the earth, so sunlight is quickly reached on the ground as the other thing.  

That milky way away from the earth is 66,500 light-years far, that distance between Earth and Orion nebula is 1,344 light-years, with such a distance of 4,367 light-years. The earth is 5.2261 trillion km apart from Pluto.

Monica walks from +21 m to - 46 m along a stretched-out tape measure.

What is her total DISTANCE traveled? Include units.

What is her total
DISPLACEMENT? Include units.

Answers

Answer:

67 meters (distance) +67 meters (displacement)

Explanation:

21 - (-46) meters

= 21 + 46 meters

= 67 meters

Hope this helped!

Answer:

67m

67m

both dist and displacement are the same oz it is on the same line

brainlists please help

on the coner opposite of 8n is 5n​

Answers

Answer:

resultant force=16N→(TOWARDS THE DIRECTION OF 8N)

Explanation:

resultant force=8N+13N-5N

                        =16N→(TOWARDS THE DIRECTION OF 8N)

What is the force needed to move a 300 kg object if you have an acceleration of 8 m/s2?

Answers

Answer: mass = 10 kg, acceleration = 3 m/s2.

Explanation: I hope that helped!!

define the unit of time and unit of length​

Answers

This is your perfect answer

The base unit for time is the second (the other SI units are: metre for length, kilogram for mass, ampere for electric current, kelvin for temperature, candela for luminous intensity, and mole for the amount of substance). The second can be abbreviated as s or sec.

Answer:

hope you like

Explanation:

A unit of time is any particular time interval, used as a standard way of measuring or expressing duration.Its SI unit is second

A unit of length refers to any arbitrarily chosen and accepted reference standard for measurement of length. Its SI unit is meter

What is the power of a crane that does 5.60 kJ of work in 2.80 s?

Answers

Answer:

I don't understand what is a power cane??

A 10 gram ball is rolling at 3 m/s. What is the energy the ball has?

Answers

Answer:

K = 0.045 J

Explanation:

It is given that,

Mass of a ball, m = 10 g = 0.01 kg

Speed of the ball, v = 3 m/s

To find,

The energy of the ball.

Solution,

Due  to the motion of the ball, it will have kinetic energy. It can be given by the formula as follows :

[tex]K=\dfrac{1}{2}mv^2\\\\K=\dfrac{1}{2}\times 0.01\times 3^2\\\\K=0.045\ J[/tex]

So, the ball will have a kinetic energy of 0.045 J.

Please help. to find these














Answers

Answer:

Velocity ratio & input work

Explanation:

If u input velocity u can work the ratio...;D ;D ;D xD

UWU plz help 50 points!!
A sprinter accelerates from the starting blocks with an acceleration of 2.5 m/s/s. They accelerate for a total of 8 seconds.
a. How far will they run while accelerating? Explain how you found your answer.
b. How fast are they moving after those 8 seconds? Explain how you found your answer

Answers

Answer:

i think its 20m for b

Explanation:

Calculate Vector component in Y if the hypotenuse is 32 and angle is 45

Answers

Answer:

The correct option is;

c. 22.6

Explanation:

The given parameters are;

The hypotenuse of the vector = 32

The angle of the vector = 45°

Therefore, the vector component in the y-axis is given as follows;

[tex]v_y = v \times sin(\theta)[/tex]

Substituting the values from the question gives;

[tex]v_y = 32 \times sin(45^{\circ}) \approx 22.6[/tex]

The vector component in the y-axis, [tex]v_y[/tex], is approximately 22.6.

Which of the following best describes inertia?
A. Rowing a boat
B. Moving forward in your seat when the car suddenly stops
C. A rocket taking off from the launching pad
D. A bicycle requires less force to move than a car

Answers

I think B I’m not quite sure

PLEASE HELP!! ITS URGENT!!!​

Answers

Answer:

F = 800 [N]

Explanation:

To be able to calculate this problem we must use the principle of momentum before and after the impact of the hammer.

We must summarize that after the impact the hammer does not move, therefore its speed is zero. In this way, we can propose the following equation.

ΣPbefore = ΣPafter

[tex](m_{1}*v_{1}) - F*t = (m_{1}*v_{2})[/tex]

where:

m₁ = mass of the hammer = 0.15 [m/s]

v₁ = velocity of the hammer = 8 [m/s]

F = force [N] (units of Newtons)

t = time = 0.0015 [s]

v₂ = velocity of the hammer after the impact = 0

[tex](0.15*8)-(F*0.0015) = (0.15*0)\\F*0.0015 = 0.15*8\\F = 1.2/(0.0015)\\F = 800 [N][/tex]

Note: The force is taken as negative since it is exerted by the nail on the hammer and this force is directed in the opposite direction to the movement of the hammer.

Lily can run 100 m in 10s. How fast was her average speed?

Answers

Answer:

The answer is 10 m/s

Explanation:

The average speed can be found by using the formula

[tex]v = \frac{d}{t} \\ [/tex]

d is the distance

t is the time taken

From the question we have

[tex]v = \frac{100}{10} \\ [/tex]

We have the final answer as

10 m/s

Hope this helps you

Two bowling balls, each with a mass of 8.52 kg, are traveling toward each other. Find the total momentum of the system if both balls have a speed of 2.13 m/s, but are traveling opposite of one another.
a. 18.1
b. 36.3
c. 0.0

d. 17.4

Answers

b=36•3

momentum=mass×velocity

The total momentum of the given system is equal to zero. Therefore, option (C) is correct.

What is the law of conservation of momentum?

The linear momentum can be described as the product of the mass times the velocity of that object. Conservation of momentum is a property of an object as the total amount of momentum stays the same.

According to the law of conservation of momentum, the sum of the momentum before and after the collision of the objects must be equal.

m₁ u₁ + m₂ u₂ = m₁ v₁ + m₂v₂

where u₁ and u₂ are initial speed while v₁ & v₂ is final speed and m₁ and m₂ is the mass of the collided objects.

The first ball, m = 8.52 g and v = 2.13 m/s

The momentum of the first ball = 18.15 g.m/s

The second ball is moving in the opposite direction w.r.t. first ball,

The second ball, m = 8.52 g and v = - 2.13 m/s

The momentum of the first ball = - 18.15 g.m/s

The total momentum  of the system = 18.15 + (-18.15) = 0

Therefore, the total momentum of the given system is zero.

Learn more about the law of conservation of linear momentum, here:

brainly.com/question/17140635

#SPJ6

Find the mass if the force is 18 n and the acceleration is 2 m/s/s

Answers

Answer:

The answer is 9 kg

Explanation:

The mass of an object can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question we have

[tex]m = \frac{18}{2} \\ [/tex]

We have the final answer as

9 kg

Hope this helps you

What are the different forms of potential energy

Answers

Answer:

   Gravitational potential energy.

   Chemical energy.

   Nuclear energy.

   Elastic potential energy

   Electrical potential energy

    Hope this helps :)

3. A student fills a plastic bottle full of water. He make a hole in the bottle half-way up,
and another hole at the bottom.
(a) Does the water come faster out of the hole in the middle or the hole at the bottom?
Explain your answer.​

Answers

Answer:

It would go out the bottom hole faster.

Explanation:

It goes down the bottom hole faster because the water would get poured out the bottom before they even flipped the water bottle.

The sum of two component vectors is referred to as the
vector.
Addition
Quantitative
Subtraction
Resultant

Answers

resultant is the correct answer!

Select the correct answer.
What condition should be met for the stellar parallax method to be useful?
A.
the star should be situated within the Milky Way
B.
the star should be brighter than the Sun
C.
the star should be close enough to the Sun to show a measurable parallax
D.
the star should be visible with the naked eye

Answers

Answer:

The answer is: C. the star must be close enough to the Sun to show measurable parallax.

Explanation:

In the field of astronomy, parallax is called stellar parallax in distant stars.

The stars for which parallax measurements have been made are those that are relatively close to the sun on the galactic scale.

The answer is: C. the star must be close enough to the Sun to show measurable parallax.

A cork floats on the surface of an incompressible liquid in a container exposed to atmospheric pressure. The container is then sealed and the air above the liquid is evacuated. The cork:

Answers

Question:

A cork floats on the surface of an incompressible liquid in a container exposed to atmospheric pressure. The container is then sealed and the air above the liquid is evacuated. The cork:

A. sinks slightly  

B. rises slightly  

C. floats at the same height  

D. bobs up and down about its old position

Answer:

The correct answer is C)  floats at the same height  

Explanation:

The liquid is incompressible because its density very high and leaves no room for further compaction whether or not there is atmospheric pressure. So when you put a cork on the liquid, pressure or no pressure, there is no displacement hence it floats on the same height regardless of the absence of air.

Cheers!

If the astronaut from question #9 collides with a satellite and comes to a complete stop, where did his momentum go? Explain this in terms of conservation of momentum.

Answers

Answer:

    m v ´- MV = (m + M) v ’

Explanation:

If the astronaut initially has a speed v the satellite has a speed V, we can define a system that is formed by the two bodies, therefore the forces during the collision are internal, so the momentum is conserved

initial instant. Before the crash

          p₀ = m v - MV

final instatne. After the crash, we have two cases

1) inelastic shock

          m_f = (m + M) v '

          p₀ = p_f

         m v ´- MV = (m + M) v ’

2) elastic collision with the astronaut's velocity, zero in this case the moment remains

        m v - MV = mv ’+ Mv’

also the kinetic energy is conserved

       mv'2 + M V2 = mv'2 + m v'2

with these two equations we can find the speed of the cars

40 POINTS I WILL GIVE TO BRAINLYEST.
PLEASE HELP​

Answers

Just divide the d/t to get answer: 10.99

Explanation:

Just divide the distance you are traveling (100m) by the mps (9.1m) and that’s it

Put in your calculator 100 divide by 9.1 and you get the answer:

10.989011

Hope that helps :D

Which line represents a stationary object?
A. Line A
B. Line B
C. Line C
D. Line D
PLZ HELP

Answers

I believe the answer is B. Stationary usually means that the object is not moving. Line B is going straight which would indicate that the object is not moving. Therefore I am pretty sure the answer is B. Hope this helps! <3

Line D represents a stationary object.

When an object is stationary, the line on the graph is horizontal.

When the object is stationary the gradient is?

We know, that an object is stationary means the slope of its position-time graph is zero or its pt graph is a straight line parallel to the x-axis.

What is an example of a stationary object?

The nest, or the resting place, is a stationary object, and one cannot put one's foot in front of it. A string is then tied from the head assembly to another stationary object.

Learn more about stationery objects here https://brainly.com/question/19650625

#SPJ2

Which of the following groups contain three elements with stable electron configurations?

A. xenon, neon, boron
B. helium, xenon, neon
C. argon, neon, barium
D. lithium, krypton, argon

Answers

Answer:

B. helium, xenon, neon

Explanation:

B is the correct answer because Helium, Xenon, and Neon are all Noble Gases at Group 18, which means they contain the full 8 electrons they need meaning they all have stable electron configurations.

Need help solving this question.

Answers

Answer:

See the answers below.

Explanation:

to solve this problem we must make a free body diagram, with the forces acting on the metal rod.

i)

The center of gravity of the rod is concentrated in half the distance, that is, from the end of the bar to the center there is 40 [cm]. This can be seen in the attached free body diagram.

We have only two equilibrium equations, a summation of forces on the Y-axis equal to zero, and a summation of moments on any point equal to zero.

For the summation of forces we will take the forces upwards as positive and the negative forces downwards.

ΣF = 0

[tex]-15+T-W=0\\T-W=15[/tex]

Now we perform a sum of moments equal to zero around the point of attachment of the string with the metal bar. Let's take as a positive the moment of the force that rotates the metal bar counterclockwise.

ii) In the free body diagram we can see that the force acts at 18 [cm] of the string.

ΣM = 0

[tex](15*9) - (18*W) = 0\\135 = 18*W\\W = 7.5 [N][/tex]

Exit ticket: A lamp is plugged into a 110 Volt electrical outlet. There is a 9 Watt LED bulb in the lamp. a. What is
the current in the bulb? b. What is the resistance of the bulb?

Answers

Answer:

(a) 0.081 A (b) 1358.02 ohms

Explanation:

Voltage, V = 110 volt

Power of a LED bulb, P = 9 Watt

(a) Let the current is I. The formula for ower in terms of voltage and power is given by :

P = VI

[tex]I=\dfrac{P}{V}\\\\I=\dfrac{9}{110}\\\\=0.081\ A[/tex]

(b) Let R is the resistance of the bulb. Using Ohm's law as follows :

V = IR

[tex]R=\dfrac{V}{I}\\\\R=\dfrac{110}{0.081}\\\\=1358.02\ \Omega[/tex]

Hence, this is the required solution.

(a) The current in the bulb is 82mA

(b) The resistance of the bulb is 1340 Ω

Given information:

Supply voltage, V = 110V

The power rating of the bulb, P = 9 W

Electrical Power:

(a) Current in the bulb:

The electrical power is given by:

P = VI

where V is the voltage, and I is the current

So, I = P/V

I = 9W / 110V = 0.082A

I = 82 mA

(b) Resistance of the bulb:

According to the Ohm's Law:

The relation between voltage (V), current (I), and resistance (R) is given by:

V = IR

110 = 0.082R

R = 1340 Ω

Learn more about electrical power:

https://brainly.com/question/20002509?referrer=searchResults

A space shuttle travels around the Earth at a constant speed of 28000 kilometers per hour. If it takes 90 minutes to complete one orbit, how far is its journey around Earth?​

Answers

42000 kilometers

Explanation:

distance is velocity × time

28000 ×1.5

42000

remember to match units

thats why i wrote 1.5 hours instead of 90minutes

PLEASE HELP IF YOU KNOW THE ANSWER QUICK PLEASE!!!

Answers

Answer:

d

Explanation:

Other Questions
Give two examples of compounds exhibiting double covalent bonds between atoms of its constituent molecules and explain why they form a double covalent bond. 2.4 *10^25.25*10^22.53*10^11.8*10^3Order from least to greatest What are the similarities between European and Japanese feudalism? Carmen is designing an intersection of the rail line and four streets. She wants to know which streets are parallel. Transversal t crosses lines c, d, e, f forming 16 angles. Clockwise from top left, the angles formed with line c are blank, blank, blank, 114 degrees; with line d are blank, blank, 68 degrees, blank; with line e are blank, 112 degrees, blank, blank; with line f are blank, blank, 66 degrees, blank. Which streets are parallel? Check all that apply. c || d c || e c || f d || e d || f e || f Select all that apply.A graph shows _____ in picture form.variablesfactscolorstatisticssumsdata 4.What is the meaning of the prefix ad-?together withbeforeto or towardover or above Match the following terms and definitions.1. cross-breeding; a method that unionizes gametes of differing genes to create a new individual recombinant DNA 2. cultured DNA molecules from different biological sources hybridization 3. a process of breeding organisms because of their specific traits selective breeding kadalasan Ang taong nagiging environmentalist o magsasaka at may talingong ? Before the clincial trials, drugs are tested in the laboratory. The laboratory trials are not trials on people. What is the drug tested on in these laboratory trials? Mark makes a 4.5% commission on all electronics at RC Willey's how much did he makethis month by selling $8,000 in electronics? Describe what happens to particles of matter as you cool the matter to absolute zero (0K). In your description, be sure to explain the changes in kinetic energy and particles motion. The ______ is designed to store audio data on computers and/or digital music players.A. waveformB. audio file formatC. sample rateD. bandwidth Aisha has used an ineffective phrase in sentence 5. Which word could best replace came onto in sentence 5? F. Battered G. Propelled H. Pushed J. Stirred A child throws a baseball straight up into the air and it takes 4.5 seconds to reach maximum height. What is the total time of flight for the baseball after being thrown and the baseball player catching it? What are the known and unknown variables? And what equation must be used? g(x) = 5x - 12. What is g(8)?Your answer what information do you get from the symbol?(Fb logo) Find the sum of the digits 10^151. By which process does yeast produce the carbon dioxide responsible for bread rising?A. PhotosynthesisB. glycolysisC. cellular respirationD. dehydration synthesis According to Yousafzai, whom does Malala day honor? When did Confucius live? A:among dynastyB:Tao dynastyC:Chou dynasty D:Han dynasty