Answer:
The density of igneous rocks is related to its color. Darker colored rocks have a higher density because of its greater mineral and iron content. Its characteristics is opposite compared to lighter colored rocks that have less density because of lower mineral and iron content
If you stay at 90 degrees Celsius and a gas in a liquid solution has a pressure of 2 atm, what solubility should it have if it has a solubility of 64 g/L at a pressure of 8 atm?
Answer:
im not sure
Explanation:
What is one difference between an electron and a neutron?
Answer: Neutron has no charge, electron has a charge and mass. Neutron occurs inside the nucleus where electron is seen outside the nucleus.
Explanation:
Find the molarity of 4.18 g MgCI2 in 500mL of water
Answer:
The molarity of MgCl₂ in water is 0.088 mol/L.
Explanation:
The molarity of MgCl₂ can be calculated as follows:
[tex] C = \frac{\eta}{V} = \frac{m}{MV} [/tex]
Where:
C: is the molarity =?
η: is the number of moles of MgCl₂ = m/M
V: is the volume of water = 500 mL = 0.500 L
m: is the mass of MgCl₂ = 4.18 g
M: is the molar mass of MgCl₂ = 95.211 g/mol
Hence, the molarity is:
[tex] C = \frac{m}{MV} = \frac{4.18 g}{95.211 g/mol*0.500 L} = 0.088 mol/L [/tex]
Therefore, the molarity of MgCl₂ in water is 0.088 mol/L.
I hope it helps you!
What type of wave has the SHORTEST wavelength and the highest frequency?
Answer:
The answer is gamma rays.
Explanation:
Gamma rays have the highest energies, the shortest wavelengths, and the highest frequencies on the electromagnetic spectrum.
6) What is the picture below an example of?
Answer:
The picture below is an example of a food chain.
Explanation:
The bug (can't tell which one by the picture) eats the grass, the frog eats the bug, the snake eats the frog, and the eagle eats the snake.
help me please guys #9
Answer:
Bases
Explanation:
Most soaps fall under the base category as they are slippery and will taste bitter if you taste it (DONT TRY IT THO).
The addition of 250.0 J to 30.0 g of copper initially at 22.0°C will change its temperature to what final value? (Specific heat of Cu= 0.387 J/g °C
Answer:
Final temperature = [tex]43.53^{\circ} C[/tex]
Explanation:
Given that,
Heat added, Q = 250 J
Mass, m = 30 g
Initial temperature, T₁ = 22°C
The Specific heat of Cu= 0.387 J/g °C
We know that, heat added due to the change in temperature is given by :
[tex]Q=mc\Delta T\\\\Q=mc(T_2-T_1)\\\\\dfrac{Q}{mc}=(T_2-T_1)\\\\T_2=\dfrac{Q}{mc}+T_1[/tex]
Put all the values,
[tex]T_2=\dfrac{250}{30\times 0.387}+22\\\\=43.53^{\circ} C[/tex]
So, the final temperature is equal to [tex]43.53^{\circ} C[/tex].
Which product is made from nonmetallic mineral resources?
a. Stainless steel
b. iron nails
c. Copper wires
d. concrete
Answer:
Concrete
Explanation:
2. Explain how an ionic bond is formed. Use the words "metal", "transfer", "nonmetal”, “cation", "anion" and
"attraction" in your description
Forming an Ion Ionic bonds are a class of chemical bonds that result from the exchange of one or more valence electrons from one atom, typically a metal, to another, typically a nonmetal. This electron exchange results in an electrostatic attraction between the two atoms called an ionic bond.
How many formula units are in 325 grams of iron (III) chloride?
Answer:
1.204 × 10^24 formula units
Explanation:
Using the following formula to convert mass of iron (III) chloride to moles;
mole = mass/molar mass
Molar mass of FeCl3 = 56 + 35.5(3)
= 56 + 106.5
= 162.5g/mol
Mole = 325/162.5
mole = 2mol
Next, to calculate the formula units of FeCl3, we multiply the number of moles of FeCl3 by Avagadro number (6.02 × 10^23)
Formula units of FeCl3 = 2 × 6.02 × 10^23
12.04 × 10^23
= 1.204 × 10^24 formula units.
What is the molarity of 40ml of NaOH if it takes 25ml of 0.5 molar HCl to neutralize it?
Answer:
Molarity of 40 ml of NaoH is 0.3125 mL
Explanation:
As we know
Molarity of acid * volume of acid = molarity of base * volume of base
Substituting the given values, we get
[tex]0.5 * 25 = X* 40 \\X = \frac{0.5*25}{40} \\X = 0.3125[/tex]
Molarity of 40 ml of NaoH is 0.3125 mL
The first organisms to arrive in an ecosystem?
The solid dissolves quickly is a chemical or physical reaction
Answer:
i think it is chemical wait no physical
Explanation:
Convert 4.00 atm to mmHg
Group of answer choices
404 mmHg
2430 mmHg
.746 mmHg
3040 mmHg
Answer:
3040 mmHg
Explanation:
Here
we have to convert 4.00 atm to mmHg
As we know that
The number of atm in 1 mmHg is 0.0013157895567935
Now there is 4.00 atm So, in mmHg it would be
And, according to this, the working is given below:
= 4 ÷ 0.0013157895567935
= 3,039.99
= 3040 mmHg
Hence, the last option is correct
And, the same is relevant and considered too
A lead mass is heated and placed in a foam cup caloriemeter containing 40.0mL of water at 17.0 C. The water reaches a temperature of 20.0 C. How many joules of heat were released by the lead?
the Answer is 502 Joules
What volume of hydrogen sulfide gas will be collected if
39.0 grams of sodium sulfide are reacted?
Answer:
yes
Explanation:
Answer:
578.....882...767..86
Una determinada cantidad de neón ocupa 0,5 litros (L) a 200ºC. Calcular el volumen que ocuparía a 0ºC si la presión se mantiene constante. Recuerda que la temperatura la debes transformar a K (grados Kelvin), y para ello se suma °C + 273.
Answer:
[tex]V_2=0.87L[/tex]
Explanation:
¡Hola!
En este caso, al considerar la información dada, inferimos que este problem se resuelve aplicando la ley de Charles, dado que tenemos una relación entre el volume y la temperatura:
[tex]\frac{V_2}{T_2}=\frac{V_1}{T_1}[/tex]
Así, despejamos V2 (volumen final) y obtenemos:
[tex]V_2=\frac{V_1T_2}{T_1}\\\\V_2=\frac{0.5L*473.15K}{273.15K}\\\\V_2=0.87L[/tex]
Saludos!
Dropping leaves in the fall is a characteristic of what type of tree?
A; deciduous
B; evergreen
C; coniferous
D; boreal
Answer:
A; deciduous
Explanation:
Trees that lose all of their leaves for part of the year are known as deciduous trees. Those that don't are called evergreen trees. Common deciduous trees in the Northern Hemisphere include several species of ash, aspen, beech, birch, cherry, elm, hickory, hornbeam, maple, oak, poplar and willow
Answer:
the answer is decidous trees
As the concentration of a KOH solution increases, the number of moles of HCl needed to neutralize the KOH solution?
A) Decreases
B) Increases
C) Remains the same
B) increasesAnswer:
Explanation:
As the concentration of a KOH solution increases, the number of moles of HCl needed to neutralize the KOH solution increases. Therefore, the correct option is option B.
What is mole?The World System representing Units (SI) uses a mole (symbol mol) as the unit of material amount. How many fundamental entities of a particular substance are present in an object and sample is determined by the quantity of that material. An elementary entity can be a single atom, a molecule, a pair of ions, an ion pair, even a subatomic particle like a proton depending on the makeup of the substance.
For instance, although having differing volumes and masses, ten molecules of liquid (a chemical compound) because 10 moles of mercurial (a chemical element) both have the same quantity of substance, because the mercury has exactly one atom every every molecular structure of the water. As the concentration of a KOH solution increases, the number of moles of HCl needed to neutralize the KOH solution.
Therefore, the correct option is option B.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Name the following alkyne.
Please help me <3
Answer:
D. 7-methyl-3-octyne
Explanation:
1) Identify the parent chain and name it like an alkane.
• The longest chain of carbons, which consists of the functional group (which is the alkyne group in this case: C≡C).
• There are 8 carbons in the longest chain, so it is called an octane.
2) Now, identify the location of the functional group.
• The location number of the functional group should be as low as possible. Thus although we could count from the right, we start counting from the left since the functional group is closer to the left. From the left, the functional group would be at carbon 8 while from the left, it is on carbon 3.
• Replace 'ane' with 'yne' in octane for the alkyne group.
• This would give us 3-octyne.
3) Lastly, add in the name of the branch.
• Here we have one branch, -CH₃. This is read as methyl.
• Identify the location number of the branch by counting the number of carbons in the same direction as when we counted the location number of the functional group. The methyl branch has a location number of 7.
• Adding the name of the branch before the parent chain, we would arrive at 7-methyl-3-octyne as the IUPAC name of the alkyne.
Further Explanation:
A) This option is incorrect as there are only 8 carbons in the parent chain. Although there are 9 carbons in total, the 9th carbon is taken care of in '7-methyl'.
B) Location number of the functional group should be as low as possible, so start counting the number of carbons from the left!
C) Since the functional group is an alkyne, the word 'octane' should be 'octyne' instead.
Two glass rods are rubbed together. One of the glass rods are brought near (but
does not touch) an uncharged pith ball. Would you expect the pith ball to attract,
repel, or do nothing? Explain why.
Answer:
Do Nothing
Explanation:
Charges are transferred by friction when two different types of bodies are rubbed together. This is known as charging by friction.
However, when two materials of the same type are rubbed together, no charge is transferred from one object to the other hence there is no transfer of charges by friction and none of the two glass rods are charged.
Therefore, when one of the glass rods is brought close but does not touch the pith ball, nothing happens.
Draw Conclusions does the F2 generation support that lack of wings is a genetic trait? Explain why or why not
Answer:
An F1 offspring could produce four types of gametes, RY, Ry, rY, and ry. The F2 generation supports the independent-assortment model and refutes the linkage model.
Explanation:
6. Calculate the new pressure in atm if 2.45 L of a gas at a pressure of 1.20 atm is contracted to a new
volume of 2.20 L
Answer:
[tex]\boxed {\boxed {\sf x \approx 1.34 \ atm}}[/tex]
Explanation:
Since we are dealing with temperature and pressure, we must use Boyle's Law. This states that the pressure is inversely proportional to the volume. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
Where P is the pressure and V is the volume.
We know the original pressure (P₁) of the gas is 1.20 atmospheres and the volume (V₁) is 2.45 liters.
[tex]1.20 \ atm * 2.45 \ L = P_2V_2[/tex]
We also know the gas is contracted to a new volume of 2.20 liters (V₂) , but we do not know the pressure (P₂). We can use x.
[tex]1.20 \ atm *2.45 \ L = x * 2.20 \ L[/tex]
We can solve the left side of the equation and multiply.
[tex]2.94 \ atm *L= x*2.20 \ L[/tex]
We are trying to find the new pressure (x), so we must isolate the variable. It is being multiplied by 2.20 liters. The inverse of multiplication is division, so we divide both sides by 2.20 L.
[tex]\frac {2.94 \ atm *L}{2.20 \ L}=\frac{x*2.20 \ L}{2.20 \ L}[/tex]
[tex]\frac {2.94 \ atm *L}{2.20 \ L}=x[/tex]
The units of liters cancel.
[tex]\frac {2.94 \ atm}{2.20 \ }=x[/tex]
[tex]1.33636363636 \ atm =x[/tex]
The original measurements have 3 significant figures, so our answer should have the same. For the number we found, that is the hundredth place.
The 6 in the thousandth place tells us to leave the 3 in the hundredth place.
[tex]1.34 \ atm \approx x[/tex]
The new pressure is approximately 1.34 atmospheres.
After a drought in which all the cotton crops died, a farmer moves away. Which of the following best describes the order of growth if the farm is left abandoned?
a
Cotton --> shrubs --> tall grasses --> weeds
b
Lichen --> flowers --> shrubs --> weeds
c
Lichen --> shrubs --> weeds --> flowers
d
Weeds --> tall grasses --> shrubs --> trees
How much energy is required to change 75 grams of copper at 35 degrees Celsius
to liquid copper at 1200 degrees C?
34950 J of energy is required to change 75 grams of copper at 35 degrees Celsius to liquid copper at 1200 degrees Celsius.
What is Specific Heat?The specific heat is the amount of heat per unit mass required to raise the temperature by one degree Celsius.
It is a measure of how much energy it takes to raise the temperature of a substance. It is the amount of heat necessary to raise one mass unit of that substance by one temperature unit.
It is given by the formula -
Q = mcΔT
where, Q = amount of heat
m = mass
c = specific heat
ΔT = Change in temperature
Given,
Mass of copper = 75g
ΔT = ( 1200 - 35) = 1165⁰C
c = 0.4 J/g ⁰C
Q = mcΔT
= 75 × 0.4 × 1165
= 34950 J
Therefore, 34950 J of energy is required to change 75 grams of copper at 35 degrees Celsius to liquid copper at 1200 degrees Celsius.
Learn more about Specific heat, here:
https://brainly.com/question/11297584
#SPJ2
What is the enthalpy of reaction for the decomposition of calcium carbonate?
CaCO3(s) Right arrow. CaO(s) + CO2(g)
A 2-column table with 6 rows. Column 1 is labeled Compound with entries upper C a upper O solid, Upper C a upper C upper O subscript 3 solid, Upper C subscript 6 upper H subscript 6 gas, Upper C upper O subscript 2 gas, Upper H subscript 2 upper O gas, Upper N upper O subscript 2 gas. Column 2 is labeled Delta H subscript f in kilojoules per molecule with entries negative 157.3, negative 1,207.1, 82.90, negative 393.5, negative 241.82, 33.84.
Answer:
First Blank: 656.3 kJ
Second Blank: Endothermic
Explanation:
Edge 21'
Answer:
1. 656.3
2. endothermic
Explanation:
Define Acid and alkalis
Answer:
Acids have a pH less than 7. Acids contain lots of hydrogen ions
Alkalis have a pH greater than 7. Alkalis contain lots of hydroxide ions
Please mark as brainliest if answer is right
Have a great day, be safe and healthy
Thank u
XD
Answer:
ACID - A substance with particular chemical properties including turning litmus red, neutralizing alkalis, and dissolving some metals; typically, a corrosive or sour-tasting liquid of this kind. Often contrasted with alkali and base.
ALKALIS - A compound with particular chemical properties including turning litmus blue and neutralizing or effervescing with acids; typically, a caustic or corrosive substance of this kind such as lime or soda: Often contrasted with acid and base.
Hope this helps
Which force was the first to be discovered?
Gravity
Weak nuclear force
Strong nuclear force
Electromagnetic force
Answer:
Gravity
Explanation:
Sir Isaac Newton was an English mathematician and mathematician and physicist who lived from 1642-1727. The legend is that Newton discovered Gravity when he saw a falling apple while thinking about the forces of nature.
Answer:
A. Gravity
Explanation:
because Isaac Newton published a comprehensive theory of gravity in 1687. Though others had thought about it before him, Newton was the first to create a theory that applied to all objects, large and small, using mathematics that was ahead of its time.
6)
Which formula can represent
an
alkyne?
A)
C₃H6
B)
C₂H4
C)
C3H4
D)
C₂H6
Answer:
c)C3H4
Explanation:
Answer: C. C3H4
Explanation:
I got it wrong and castle learning showed me the answer
2 P + 5 Cl2=2 PCl3 +886.0 kJ
How much energy will be produced when 1.382 mol P reacts with excess
Cl2?
Answer:
612.2kJ are produced
Explanation:
Based on the reaction:
2P + 5Cl₂ → 2PCl₃ + 886.0kJ
When 2 moles of P react with an excess of chlorine 886.0kJ are produced (That is 886.0kJ / 2mol P).
To solve this question we must use the last statement as follows:
1.382mol P * (886.0kJ / 2mol P) =
612.2kJ are produced