Answer:
Due to flipping of polarity
Explanation:
During the changing of polarity, the current on the one side is maximum as the polarity change then the current is gradually reducing toget from another end.
Blue light (λ = 475 nm) is sent through a single slit with a width of 2.1 µm. What is the maximum possible number of bright fringes, including the central maximum, produced on the screen? (Hint: What is the largest angle that can be used?)
Answer:
m = 4
Explanation:
The expression that explains the constructive interference of a diffraction pattern is
a sin θ = m λ
where a is the width of the slit and λ the wavelength
sin θ = m λ / a
The maximum value is for when the sine is 1, let's substitute
1 = m λ/a
m = a /λ
let's reduce the magnitudes to the SI system
a = 2.1 um = 2.1 10⁻⁶
lam = 475 nm = 475 10⁻⁹ m
let's calculate
m = 2.1 10⁻⁶ / 475 10⁻⁹
m = 4.42
with m must be an integer the highest value is
m = 4
what is mean by the terminal velocity
Terminal Velocity is the constant speed that a falling thing reaches when the resistence of a medium prevents the thing to reach any further speed.
Best of Luck!
The spectral lines of two stars in a particular eclipsing binary system shift back and forth with a period of 3 months. The lines of both stars shift by equal amounts, and the amount of the Doppler shift indicates that each star has an orbital speed of 88,000 m/s. What are the masses of the two stars
Answer:
Explanation:
given
T = 3months = 7.9 × 10⁶s
orbital speed = 88 × 10³m/s
V= 2πr÷T
∴ r = (V×T) ÷ 2π
r = (88km × 7.9 × 10⁶s) ÷ 2π
r = 1.10 × 10⁸km
using kepler's 3rd law
mass of both stars = (seperation diatance)³/(orbital speed)²
M₁ + M₂ = (2r)³/([tex]\frac{1}{4}[/tex]year)²
= (1.06 × 10²⁵)/(6.2×10¹³)
1.71×10¹²kg
since M₁ = M₂ =1.71×10¹²kg ÷ 2
M₁ = M₂ = 8.55×10¹¹kg
Legacy issues $570,000 of 8.5%, four-year bonds dated January 1, 2019, that pay interest semiannually on June 30 and December 31. They are issued at $508,050 when the market rate is 12%.
1. Determine the total bond interest expense to be recognized.
Total bond interest expense over life of bonds:
Amount repaid:
8 payments of $24,225 $193,800
Par value at maturity 570,000
Total repaid 763,800
Less amount borrowed 645 669
Total bond interest expense $118.131
2. Prepare a straight-line amortization table for the bonds' first two years.
Semiannual Period End Unamortized Discount Carrying Value
01/01/2019
06/30/2019
12/31/2019
06/30/2020
12/31/2020
3. Record the interest payment and amortization on June 30. Note:
Date General Journal Debit Credit
June 30
4. Record the interest payment and amortization on December 31.
Date General Journal Debit Credit
December 31
Answer:
1) Determine the total bond interest expense to be recognized.
Total bond interest expense over life of bonds:
Amount repaid:
8 payments of $24,225: $193,800
Par value at maturity: $570,000
Total repaid: $763800 (193,800 + 570,000)
Less amount borrowed: $508050
Total bond interest expense: $255750 (763800 - 508,050)
2)Prepare a straight-line amortization table for the bonds' first two years.
Semiannual Interest Period End; Unamortized Discount; Carrying Value
01/01/2019 61,950 508,050
06/30/2019 54,206 515,794
12/31/2019 46,462 523,538
06/30/2020 38,718 531,282
12/31/2020 30,974 539,026
3) Record the interest payment and amortization on June 30:
June 30 Bond interest expense, dr 31969
Discount on bonds payable, Cr (61950/8) 7743.75
Cash, Cr ( 570000*8.5%/2) 24225
4) Record the interest payment and amortization on December 31:
Dec 31 Bond interest expense, Dr 31969
Discount on bonds payable, Cr 7744
Cash, Cr 24225
How can global warming lead to changes to the Earth’s surface? a. Global warming can lead to an increased number of earthquakes, which change the Earth’s surface. b. Global warming can lead to glaciers melting, causing flooding to areas and the decrease of glacial land masses. c. Global warming leads to a decrease in water levels of coastal wetlands. d. Global warming cannot lead to changes to the Earth’s surface.
Answer:
Option: b. Global warming can lead to glaciers melting, causing flooding to areas and the decrease of glacial land masses.
Explanation:
Global warming is the reason for the changes in environment and climate on earth. Melting of glaciers leads to an increase in water level and a decrease in landmass. One of the most climactic consequences is the decrease in Arctic sea ice. Melting polar ice along with ice sheets and glaciers across Greenland, North America, Europe, Asia, and South America suspected to increase sea levels slowly. There is an increase in the glacial retreat due to global warming, which leaves rock piles that covered with ice.
Answer:
B: Global warming can lead to glaciers melting, causing flooding to areas and the decrease of glacial land masses.
Explanation:
Global warming is primarily caused by the increase in greenhouse gases, such as carbon dioxide, in the Earth's atmosphere. This leads to a rise in global temperatures, which has various impacts on the Earth's surface. One significant effect is the melting of glaciers and ice caps in polar regions and mountainous areas.
As temperatures increase, glaciers and ice sheets start to melt at a faster rate. This melting results in the release of massive amounts of water into rivers, lakes, and oceans. Consequently, there can be an increase in the frequency and intensity of flooding events in regions downstream from these melting glaciers.
Moreover, the melting of glaciers and ice caps contributes to a rise in sea levels. As the melted ice enters the oceans, it adds to the overall volume of water, leading to a gradual increase in sea levels worldwide. This rise in sea levels poses a threat to coastal areas, as they become more vulnerable to coastal erosion, storm surges, and saltwater intrusion into freshwater sources.
Additionally, the loss of glacial land masses due to melting can have long-term effects on ecosystems. Glaciers act as freshwater reservoirs, releasing water gradually throughout the year. With their decline, the availability of freshwater for agriculture, drinking water, and other human needs can be significantly affected.
Therefore, global warming can indeed lead to changes in the Earth's surface, particularly through the melting of glaciers and subsequent impacts on sea levels, flooding, and glacial land masses.
E23 verified.
A spring with a 3.15kg weight hanging from it measures 13.40cm, and without the weight 12.00cm. If you hang a weight on it so as to store 10.0J potential energy in it, how long will the spring be?
Answer:
21.52 cm
Explanation:
Given that
mass of the spring, m = 3.15 kg
Length of the spring l2, = 13.4 cm = 0.134 m
Length of the spring l1 = 12 cm = 0.12 m
change in extension, x = 0.134 - 0.12 = 0.014 m
Acceleration due to gravity, g = 9.8 m/s²
Potential Energy, U = 10 J
See attachment for calculation
Answer:
Final Length = 12.45 cm
Explanation:
First we need to find the spring constant. From Hooke's Law:
F = kΔx
where,
F = Force Applied on Spring = Weight = mg = (3.15 kg)(9.8 m/s²) = 30.87 N
k = spring constant = ?
Δx = change in length of spring = 13.4 cm - 12 cm = 1.4 cm = 0.014 m
Therefore,
30.87 N = k(0.014 m)
k = (30.87 N)/(0.014 m)
k = 2205 N/m
Now, for the Potential Energy of 10 J:
P.E = (1/2)KΔx²
where,
P.E = Potential Energy of Spring = 10 J
Δx = ?
Therefore,
10 J = (2205 N/m)Δx²
Δx = √[10 J/(2205 N/m)
Δx = Final Length - Initial length = 0.0045 m = 0.45 cm
Final Length = 0.45 cm + 12 cm
Final Length = 12.45 cm
A beam of light is propagating in the x direction. The electric-field vector Group of answer choices can oscillate in any arbitrary direction in space. must oscillate in the z direction. must oscillate in the yz plane. must oscillate in the x direction. must have a steady component in the x direction.
Answer:
Option C is correct.
The electric-field vector must oscillate in the yz plane.
Explanation:
Light, in waveform, is an electromagnetic wave.
And electromagnetic waves are known to have their electric and magnetic field perpendicular to each other and also simultaneously perpendicular to the direction of propagation of the wave.
If the velocity of direction of propagation of the wave is in one direction, the electric-field vector must be in a direction we are sure is perpendicular to this direction of wave propagation and the wave's magnetic field.
Of the options provided, only option B (z-direction) and option C (yz-plane) show a direction that is indeed perpendicular to the direction of propagation of the wave (x-axis).
And truly, the electric-field vector for this wave can be in any of the two directions without breaking the laws of physics, but the electric-field vector oscillating in the yz-plane is a more general answer as it covers all the possible directions that the electric-field can oscillate in, including the one specified by option B (z-direction).
Hence, the correct answer is option C.
Hope this Helps!!!
2. A 2.0-kg block slides down an incline surface from point A to point B. Points A and B are 2.0 m apart. If the coefficient of kinetic friction is 0.26 and the block is starting at rest from point A. What is the work done by friction force
Answer:a
Explanation:
Does there appear to be a simple mathematical relationship between the acceleration of an object (with fixed mass and negligible friction) and the force applied to the object (measured by the force probe mounted on the object)? Describe the mathematical relationship in words.
Answer:
the net force applied to an object is directly proportional to the acceleration undergone by that object
Explanation:
This verbal statement can be expressed in equation form as follows:
a = Fnet / m
Two identical pendulums have the same period when measured in the factory. While one pendulum swings on earth, the other is taken on a spaceship traveling at 95%% the speed of light. Assume that both pendulums operate under the influence of the same net force and swing through the same angle.
When observed from earth, how many oscillations does the pendulum on the spaceship undergo compared to the pendulum on earth in a given time interval?
a. more oscillations
b. fewer oscillations
c. the same number of oscillations
Answer:
Explanation:
As a result of impact of time widening, a clock moving as for an observer seems to run all the more gradually than a clock that is very still in the observer's casing.
At the point when observed from earth, the pendulum on the spaceship takes more time to finish one oscillation.
Hence, the clock related with that pendulum will run more slow (gives fewer oscillations as observed from the earth) than the clock related with the pendulum on earth.
Ans => B fewer oscillations
Find the terminal velocity (in m/s) of a spherical bacterium (diameter 1.81 µm) falling in water. You will first need to note that the drag force is equal to the weight at terminal velocity. Take the density of the bacterium to be 1.10 ✕ 103 kg/m3. (Assume the viscosity of water is 1.002 ✕ 10−3 kg/(m · s).)
Answer:
The terminal velocity of a spherical bacterium falling in the water is 1.96x10⁻⁶ m/s.
Explanation:
The terminal velocity of the bacterium can be calculated using the following equation:
[tex] F = 6\pi*\eta*rv [/tex] (1)
Where:
F: is drag force equal to the weight
η: is the viscosity = 1.002x10⁻³ kg/(m*s)
r: is the radium of the bacterium = d/2 = 1.81 μm/2 = 0.905 μm
v: is the terminal velocity
Since that F = mg and by solving equation (1) for v we have:
[tex] v = \frac{mg}{6\pi*\eta*r} [/tex]
We can find the mass as follows:
[tex] \rho = \frac{m}{V} \rightarrow m = \rho*V [/tex]
Where:
ρ: is the density of the bacterium = 1.10x10³ kg/m³
V: is the volume of the spherical bacterium
[tex] m = \rho*V = \rho*\frac{4}{3}\pi*r^{3} = 1.10 \cdot 10^{3} kg/m^{3}*\frac{4}{3}\pi*(0.905 \cdot 10^{-6} m)^{3} = 3.42 \cdot 10^{-15} kg [/tex]
Now, the terminal velocity of the bacterium is:
[tex] v = \frac{mg}{6\pi*\eta*r} = \frac{3.42 \cdot 10^{-15} kg*9.81 m/s^{2}}{6\pi*1.002 \cdot 10^{-3} kg/(m*s)*0.905 \cdot 10^{-6} m} = 1.96 \cdot 10^{-6} m/s [/tex]
Therefore, the terminal velocity of a spherical bacterium falling in the water is 1.96x10⁻⁶ m/s.
I hope it helps you!
A coil has resistance of 20 W and inductance of 0.35 H. Compute its reactance and its impedance to an alternating current of 25 cycles/s.
Answer:
Reactance of the coil is 55 WImpedance of the coil is 59 WExplanation:
Given;
Resistance of the coil, R = 20 W
Inductance of the coil, L = 0.35 H
Frequency of the alternating current, F = 25 cycle/s
Reactance of the coil is calculated as;
[tex]X_L=[/tex] 2πFL
Substitute in the given values and calculate the reactance [tex](X_L)[/tex]
[tex]X_L =[/tex] 2π(25)(0.35)
[tex]X_L[/tex] = 55 W
Impedance of the coil is calculated as;
[tex]Z = \sqrt{R^2 + X_L^2} \\\\Z = \sqrt{20^2 + 55^2} \\\\Z = 59 \ W[/tex]
Therefore, the reactance of the coil is 55 W and Impedance of the coil is 59 W
1. A ski-plane with a total mass of 1200 kg lands towards the west on a frozen lake at 30.0
m/s. The coefficient of kinetic friction between the skis and the ice is 0.200. How far does
the plane slide before coming to a stop?
Answer:
d = 229.5 m
Explanation:
It is given that,
Total mass of a ski-plane is 1200 kg
It lands towards the west on a frozen lake at 30.0 m/s.
The coefficient of kinetic friction between the skis and the ice is 0.200.
We need to find the distance covered by the plane before coming to rest. In this case,
[tex]\mu mg=ma\\\\a=\mu g\\\\a=0.2\times 9.8\\\\a=1.96\ m/s^2[/tex]
It is decelerating, a = -1.96 m/s²
Now using the third equation of motion to find the distance covered by the plane such that :
[tex]v^2-u^2=2ad\\\\d=\dfrac{-u^2}{2a}\\\\d=\dfrac{-(30)^2}{2\times -1.96}\\\\d=229.59\ m[/tex]
So, the plane slide a distance of 229.5 m.
What direct current will produce the same amount of thermal energy, in a particular resistor, as an alternating current that has a maximum value of 2.59 A?
Answer:
The direct current that will produce the same amount of thermal energy is 1.83 A
Explanation:
Given;
maximum current, I₀ = 2.59 A
The average power dissipated in a resistor connected in an AC source is given as;
[tex]P_{avg} = I_{rms} ^2R[/tex]
Where;
[tex]I_{rms} = \frac{I_o}{\sqrt{2} }[/tex]
[tex]P_{avg} = (\frac{I_o}{\sqrt{2} } )^2R\\\\P_{avg} = \frac{I_o^2R}{2} ----equation(1)[/tex]
The average power dissipated in a resistor connected in a DC source is given as;
[tex]P_{avg} = I_d^2R --------equation(2)[/tex]
where;
[tex]I_d[/tex] is direct current
Solve equation (1) and (2) together;
[tex]I_d^2R = \frac{I_o^2R}{2} \\\\I_d^2 = \frac{I_o^2}{2} \\\\I_d=\sqrt{\frac{I_o^2}{2} } \\\\I_d = \frac{I_o}{\sqrt{2}} \\\\I_d = \frac{2.59}{\sqrt{2} } \\\\I_d = 1.83 \ A[/tex]
Therefore, the direct current that will produce the same amount of thermal energy is 1.83 A
A water-balloon launcher with mass 5 kg fires a 1 kg balloon with a velocity of
8 m/s to the east. What is the recoil velocity of the launcher?
Answer:
1.6 m/s west
Explanation:
The recoil velocity of the launcher is 1.6 m/s west.
What is conservation of momentum principle?When two bodies of different masses move together each other and have head on collision, they travel to same or different direction after collision.
A water-balloon launcher with mass 5 kg fires a 1 kg balloon with a velocity of 8 m/s to the east.
Final momentum will be zero, so
m₁u₁ +m₂u₂ =0
Substitute the values for m₁ = 5kg, m₂ =1kg and u₂ =8 m/s, then the recoil velocity will be
5 x v +1x8 = 0
v = - 1.6 m/s
Thus, the recoil velocity of the launcher is 1.6 m/s (West)
Learn more about conservation of momentum principle
https://brainly.com/question/14033058
#SPJ2
In this problem we will consider the collision of two cars initially moving at right angles. We assume that after the collision the cars stick together and travel off as a single unit. The collision is therefore completely inelastic. Two cars of masses m1 and m2 collide at an intersection. Before the collision, car 1 was traveling eastward at a speed of v1, and car 2 was traveling northward at a speed of v2. After the collision, the two cars stick together and travel off in the direction.
Required:
a. Write the momentum conservation equation for the east-west components.
b. Write the momentum conservation equation for the north-south components.
c. Find the tangent of the angle.
Answer:
a) vfₓ = m₁ / (m₁ + m₂) v₁, b) tan θ = m₂ / m₁ v₂ / v₁, c)
Explanation:
Momentum is a vector quantity, so the consideration must be fulfilled in all axes
a) conservation of the moment east-west direction
the system is formed by the two cases, so that the forces during the sackcloth have been internal and therefore the mummer remains
before the crash
p₀ = m₁ v₁
after the crash
[tex]p_{f}[/tex]= (m1 + m2) vfₓ
p₀ = pf
m₁ v₁ = (m₁ + m₂) vfₓ
vfₓ = m₁ / (m₁ + m₂) v₁
b) conservation of the North-South axis moment
before the shock
p₀ = m₂ v₂
after the crash
p_{f} = ( m₁ +m₂) [tex]vf_{y}[/tex]
p₀ = p_{f}
me 2 v₂ = (m₁ + m₂) vfy
[tex]vf_{y}[/tex] = m₂ / (m₁ + m₂) v₂
c) the angle with which the car moves is
tan θ = Vfy / Vfₓ
tan θ = [m₂ / (m₁ + m₂) v] / [m₁ / (m₁ + m₂) v₁]
tan θ = m₂ / m₁ v₂ / v₁
The momentum conservation equation for the north-south components is [tex]m_1u_1 = v(m_1 + m_2)[/tex]
The momentum conservation equation for the north-south components is [tex]m_2u_2 = v(m_1 + m_2)[/tex]
The tangent of the angle is 1.
The given parameters;
angle between the initial velocity of the cars, θ = 90Apply the principle of conservation of linear momentum of inelastic collision as shown below;
[tex]m_1u_1 + m_2u_2 = v(m_1 + m_2)[/tex]
The momentum conservation equation for the east-west components is written as follows;
[tex]m_1(u_1cos \ 0) + m_2(u_2 cos 90)= v(m_1 + m_2)\\\\m_1u_1 = v(m_1 + m_2)[/tex]
The momentum conservation equation for the north-south components is written as follows;
[tex]m_1(u_1sin 0) + m_2(u_2sin90) = v(m_1 + m_2)\\\\m_2u_2 = v(m_1 + m_2)[/tex]
The tangent of the angle is calculated as follows;
[tex]tan \ \theta = \frac{p_y}{p_x} = \frac{v(m_1 + m_2)}{v(m_1 + m_2)} \\\\tan \ \theta = 1\\\\\theta = tan^{-1} (1) \\\\\theta = 45\ ^0[/tex]
Learn more here:https://brainly.com/question/24424291
3. A body moves along a semicircular path. The ratio of distance to displacement is
Answer:
Ratio of distance to displacement is pi/2
Explanation:
Pls see attached file for diagram and explanation
When a hydrometer (see Fig. 2) having a stem diameter of 0.30 in. is placed in water, the stem protrudes 3.15 in. above the water surface. If the water is replaced with a liquid having a specific gravity of 1.10, how much of the stem would protrude above the liquid surface
Answer:
5.79 in
Explanation:
We are given that
Diameter,d=0.30 in
Radius,r=[tex]\frac{d}{2}=\frac{0.30}{2}=0.15 in[/tex]
Weight of hydrometer,W=0.042 lb
Specific gravity(SG)=1.10
Height of stem from the water surface=3.15 in
Density of water=[tex]62.4lb/ft^3[/tex]
In water
Volume of water displaced [tex]V=\frac{mass}{density}=\frac{0.042}{62.4}=6.73\times 10^{-4} ft^3[/tex]
Volume of another liquid displaced=[tex]V'=\frac{V}{SG}=\frac{6.73\times 10^{-4}}{1.19}=5.66\times 10^{-4}ft^3[/tex]
Change in volume=V-V'
[tex]V-V'=\pi r^2 l[/tex]
Substitute the values
[tex]6.73\times 10^{-4}-5.66\times 10^{-4}=3.14\times (\frac{0.15}{12})^2l[/tex]
By using
1 ft=12 in
[tex]\pi=3.14[/tex]
[tex]l=\frac{6.73\times 10^{-4}-5.66\times 10^{-4}}{3.14\times (\frac{0.15}{12})^2}[/tex]
l=2.64 in
Total height=h+l=3.15+2.64= 5.79 in
Hence, the height of the stem protrude above the liquid surface=5.79 in
A 40.0 kg ballet dancer stands on her toes during a performance with 25.0 cm2 in contact with the floor. What is the pressure exerted by the floor over the area of contact if the dancer is stationary
Explanation:
40×10ms^-2
400N.
25/100m^2
0.25m^2
1.P=F/A
=400N/0.25m^2
=100Nm^-2
=100Pa
Two lenses of focal length 4.5cm and 1.5cm are placed at a certain distance apart, calculate the distance between the lenses if they form an achromatic combination
3.0cm
Explanation:
For lenses in an achromatic combination, the following condition holds, assuming the two lenses are of the same materials;
d = [tex]\frac{f_1 + f_2}{2}[/tex] ---------(i)
Where;
d= distance between lenses
f₁ = focal length of the first lens
f₂ = focal length of the second lens
From the question;
f₁ = 4.5cm
f₂ = 1.5cm
Substitute these values into equation (i) as follows;
d = [tex]\frac{4.5+1.5}{2}[/tex]
d = [tex]\frac{6.0}{2}[/tex]
d = 3.0cm
Therefore, the distance between the two lenses is 3.0cm
your washer has a power of 350 watts and your dryer has a power of 1800 watts how much energy do you use to clean a load of clothes in 1 hour of washing and 1 hour of drying?
A. 1.29 x 10^3 J
B. 2.58 x 10^3 J
C. 1.55 x 10^7 J
D. 7.74 x 10^6 J
Answer:
7.74 x 10⁶ Joules
Explanation:
recall that "Watts" is the SI unit used for "energy per unit time"
Hence "Watts" may also be expressed as Joules / Second (or J/s)
We are given that the washer is rated at 350W (i.e. 350 Joules / s) and the dryer is rated at 1800W (i.e. 1800 Joules / s).
We are also given that the appliances are each run for 1 hour
1 hour = 60 min = (60 x 60) seconds = 3600 seconds
Hence the total energy used,
= Energy used by Washer in 1 hour + Energy used by dryer in 1 hour
= (350 J/s x 3600 s) + (1800 J/s x 3600 s)
= 3600 ( 350 + 1800)
= 3600 (2150)
= 7,740,000 Joules
= 7.74 x 10⁶ Joules
A proton with an initial speed of 400000 m/s is brought to rest by an electric field.
Part A- Did the proton move into a region of higher potential or lower potential?
Part B - What was the potential difference that stopped the proton?
?U = ________V
Part C - What was the initial kinetic energy of the proton, in electron volts?
Ki =_________eV
Answer:
moves into a region of higher potential
Potential difference = 835 V
Ki = 835 eV
Explanation:
given data
initial speed = 400000 m/s
solution
when proton moves against a electric field so that it will move into higher potential region
and
we know Work done by electricfield W is express as
W = KE of proton K
so
q × V = 0.5 × m × v² ......................1
put here va lue
1.6 × [tex]10^{-19}[/tex] × V = 0.5 × 1.67 × [tex]10^{-27}[/tex] × 400000²
Potential difference V = 1.336 × 10-16 / 1.6 × 10-19
Potential difference = 835 V
and
KE of proton in eV is express as
Ki = V numerical
Ki = 835 eV
A loop of wire with cross-sectional area 1 m2 is inserted into a uniform magnetic field with initial strength 1 T. The field is parallel to the axis of the loop. The field begins to grow with time at a rate of 2 Teslas per hour. What is the magnitude of the induced EMF in the loop of wire
Answer:
The magnitude of the EMF is 0.00055 volts
Explanation:
The induced EMF is proportional to the change in magnetic flux based on Faraday's law:
[tex]emf\,=-\,N\, \frac{d\Phi}{dt}[/tex]
Since in our case there is only one loop of wire, then N=1 and we get:
[tex]emf\,=-\,N\, \frac{d\Phi}{dt}[/tex]
We need to express the magnetic flux given the geometry of the problem;
[tex]\Phi=B\,\,A[/tex]where A is the area of the coil that remains unchanged with time, and B is the magnetic field that does change with time. Therefore the equation for the EMF becomes:
[tex]emf\,=-\,N\, \frac{d\Phi}{dt} = \frac{d\Phi}{dt} =-\frac{d\,(B\,A)}{dt} =-\,A\,\frac{d\,(B)}{dt}=- 1\,m^2(2\,\,T/h})= -2\,\,m^2\,T/(3600\,\,s)= -0.00055\,Volts[/tex]
Which statement describes one feature of a mineral's definite chemical composition?
It always occurs in pure form.
It always contains certain elements.
It cannot form from living or once-living materials.
It cannot contain atoms from more than one element.
N
Answer:
It always contains certain elements
Explanation:
Minerals can be defined as natural inorganic substances which possess an orderly internal structural arrangement as well as a particular, well known chemical composition, crystal structures and physical properties. Minerals include; quartz, dolomite, basalt, etc. Minerals may occur in isolation or in rock formations.
Minerals contain specific, well known chemical elements in certain ratios that can only vary within narrow limits. This is what we mean by a mineral's definite chemical composition. The structure of these minerals are all well known as well as their atom to atom connectivity.
The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
A mineral is a naturally occurring chemical compound, usually of a crystalline form.
A mineral has one specific chemical composition.chemical composition that varies within a specific limited range and the atoms that make up the mineral must occur in specific ratiosthe proportions of the different elements and groups of elements in the mineral.Thus, The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
Learn more:
https://brainly.com/question/690965
A typical arteriole has a diameter of 0.080 mm and carries blood at the rate of 9.6 x10-5 cm3/s. What is the speed of the blood in (cm/s) the arteriole
Answer:
v= 4.823 × 10⁻⁹ cm/s
Explanation:
given
flow rate = 9.6 x10-5 cm³/s, d = 0.080mm
r = d/2= 0.080/2= 0.0040 cm
speed = rate of blood flow × area
v = (9.6 x 10⁻⁵ cm³/s) × (πr²)
v = (9.6 x 10⁻⁵ cm³/s) × π(0.0040 × cm)²
v= 1.536 × 10⁻⁹π cm/s
v= 4.823 × 10⁻⁹ cm/s
Which of the following gives the magnitude of the average velocity (over the entire run) of an athlete running on a circular track with a circumference of 0.5 km, if that athlete runs a total length of 1.0 km in a time interval of 4 minutes?
a. O m/s
b. 2 m/s
c. 4.2 m/s
d. 16.8 m/s
Answer:
c. 4.2 m/s
Explanation:
The definition of the average velocity, measured in meters per second, is given by the following expression:
[tex]\bar v = \frac{x_{f}-x_{o}}{t_{f}-t_{o}}[/tex]
Where:
[tex]x_{o}[/tex], [tex]x_{f}[/tex] - Initial and final positions, measured in meters.
[tex]t_{o}[/tex], [tex]t_{f}[/tex] - Initial and final instants, measured in seconds.
Positions and instants must be written in meters and seconds, respectively:
[tex]x_{o} = 0\,m[/tex], [tex]x_{f} = 1000\,m[/tex].
[tex]t_{o} = 0\,s[/tex], [tex]t_{f} = 240\,s[/tex].
Finally, the average velocity of the athlete that runs a total length of 1.0 kilometer in a time interval of 4 minutes is:
[tex]\bar v = \frac{1000\,m-0\,m}{240\,s-0\,s}[/tex]
[tex]\bar v = 4.167\,\frac{m}{s}[/tex]
Hence, the best option is C.
A 1.20 kg water balloon will break if it experiences more than 530 N of force. Your 'friend' whips the water balloon toward you at 13.0 m/s. The maximum force you apply in catching the water balloon is twice the average force. How long must the interaction time of your catch be to make sure the water balloon doesn't soak you
Answer:
t = 0.029s
Explanation:
In order to calculate the interaction time at the moment of catching the ball, you take into account that the force exerted on an object is also given by the change, on time, of its linear momentum:
[tex]F=\frac{\Delta p}{\Delta t}=m\frac{\Delta v}{\Delta t}[/tex] (1)
m: mass of the water balloon = 1.20kg
Δv: change in the speed of the balloon = v2 - v1
v2: final speed = 0m/s (the balloon stops in my hands)
v1: initial speed = 13.0m/s
Δt: interaction time = ?
The water balloon brakes if the force is more than 530N. You solve the equation (1) for Δt and replace the values of the other parameters:
[tex]|F|=|530N|= |m\frac{v_2-v_1}{\Delta t}|\\\\|530N|=| (1.20kg)\frac{0m/s-13.0m/s}{\Delta t}|\\\\\Delta t=0.029s[/tex]
The interaction time to avoid that the water balloon breaks is 0.029s
Q 6.30: What is the underlying physical reason for the difference between the static and kinetic coefficients of friction of ordinary surfaces
Answer:
the coefficient of static friction is larger than kinetic coefficients of friction
Explanation:
The coefficient of static friction is usually larger than the kinetic coefficients of friction because an object at rest has increasingly settled agreements with the surface it's resting on at the molecular level, so it takes more force to break these agreement.
Until this force is been overcome, kinetic coefficient of friction is not going to surface.
Note: coefficient of static friction is the friction between two bodies when the bodies aren't moving. Meanwhile, kinetic coefficient is the ratio of frictional force of a moving body to the normal reaction.
[tex]F_{s}[/tex] ≤μ[tex]_{s}[/tex]N(coefficient of static friction)
where [tex]F_{s}[/tex] is the static friction, μ[tex]_{s}[/tex] is the coefficient of static friction and N is the normal reaction
μ = [tex]\frac{F}{N}[/tex](kinetic coefficient of friction)
attached is diagram illustrating the explanation
What is the work done in stretching a spring by a distance of 0.5 m if the restoring force is 24N?
Answer:
3Nm
Explanation:
work = 0.5 x 12 x 0.5 = 3
The work done in stretching the spring by a distance of 0.5 m, with a restoring force of 24 N, is 6 joules.
To calculate the work done in stretching a spring, we can use the formula for work done by a spring:
Work = (1/2) * k *[tex]x^2[/tex]
where:
k = spring constant
x = distance the spring is stretched
Given that the restoring force (F) acting on the spring is 24 N, and the distance the spring is stretched (x) is 0.5 m, we can find the spring constant (k) using Hooke's law:
F = k * x
k = F / x
k = 24 N / 0.5 m
k = 48 N/m
Now, we can calculate the work:
Work = (1/2) * 48 N/m * [tex](0.5 m)^2[/tex]
Work = (1/2) * 48 N/m * [tex]0.25 m^2[/tex]
Work = 6 joules
Therefore, the work done in stretching the spring by a distance of 0.5 m, with a restoring force of 24 N, is 6 joules.
To know more about work done, here
brainly.com/question/2750803
#SPJ2
A soap bubble of radius R is situated in a uniform electric field of magnitude E. The electric flux through the surface of the soap bubble is
Answer:
The electric flux around the soap bubble will be
Ф = q/ε
Explanation:
The radius of the soap bubble = R
The electric field around the soap bubble = E
The electric flux = ?
The soap can be approximated to be a sphere, so we find the surface area of the sphere
For the soap bubble, the surface area will be
A = [tex]4\pi R^{2}[/tex]
Recall that electric flux is given as
Ф = EA
substituting value of A from above, we'll have
Ф = E[tex]4\pi R^{2}[/tex]..... equ 1
Also recall that the electric field E is given as
E = q/(4πε[tex]R^{2}[/tex])
substitute the value of E into equ 1, to get
Ф = q/(4πε[tex]R^{2}[/tex]) * [tex]4\pi R^{2}[/tex]
The electric flux around the soap bubble reduces to
Ф = q/ε