Answer:The world population increased from 1 billion in 1800 to 7.7 billion today. The world population growth rate declined from 2.2% per year 50 years ago to 1.05% per year. Other relevant research: World population growth – This article is focusing on the history of population growth up to the present.
Explanation:
Question 1
Part A
Describe the sequence of adding ingredients to make the recipe for condensed tomato soup. To mix the ingredients, you have an industrial-sized vat with a capacity of 800 L. You also have the ability to heat what is in the vat and/or stir the vat, both of which require energy and therefore, cost you money. Focus on the fact that the manufacturing process should be time efficient and cost efficient in terms of energy use. Be sure to refer to the solubility charts or graphs that you find for salt and sugar during your research. Finally, presume that the tomato powder has low solubility which is not temperature dependent.
Part B
What changes could be made to optimize the manufacturing process?
Answer:
Part A:
"360 grams of NaCl can be dissolved in 1 L water. So, 2000 grams sugar can be dissolved in 1 L water then we can say that the solubility of salt is lesser in water as to sugar and both heightened by increasing the temperature. If we make a batch of 800 L we can add sugar, 1600 kg at 25 0c. We can add salt is 288 kg at 25 0c and the ingredient tomato is having low solubility."
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/8061-describe-the-sequence-of-adding-ingredients-to-make-the-recipe.html
Part B:
'Manufacturers can generate new value minimize cost and increase operational stability by focusing on 4 broad areas; Management, Supply Circle, Product Design, and Value Recovery.'
Read more at Answer.Ya.Guru – https://answer.ya.guru/questions/2807911-what-changes-could-be-made-to-optimize-the-manufacturing-process.html
In order to make tomato soup, the salt NaCl is first added, then followed by sugar and finally the tomato powder.
What are the ingredients required in making tomato soup?Tomato soup is made of the following ingredients:
Tomato powder salt, NaClsugarIn order to make tomato soup, the salt NaCl is first added, then followed by sugar. This is to ensure increase in the boiling point of water and to reduce the heating time of the tomato soup.
The solution is heated to induce more dissolution if solute and finally the tomato powder is added.
In order to optimize the manufacturing process, changes should be made in the design, supply and composition of the soup.
Therefore, an optimized manufacturing process will reduce cost of production.
Learn more about tomato soup at: https://brainly.com/question/21475711
Someone please help me
Answer:reflection
Explanation:
High levels and long periods of stress can increase a person’s risk for many diseases.
True
False
Answer:
true
Explanation:
what is chemical bonding?and types of chemical bonding there are?
Answer:
There are three primary types of bonding: ionic, covalent, and metallic. Ionic bonding. Definition: An ionic bond is formed when valence electrons are transferred from one atom to the other to complete the outer electron shell. Example: A typical ionically bonded material is NaCl (Salt).Explanation:
Hope it helps
#CarryOnLearning
An electromagnetic wave has a wavelength of 4000 meters. What is this wave length and scientific notation?
A. 4.0 x 10-3 m
B. 4.0 x 10 3 m
C. 4.0 x 10 2 m
D. 4.0 x 10-2 m
Answer:
Wavelength of electromagnetic wave = 4.0 × 10³
Explanation:
Given:
Wavelength of electromagnetic wave = 4000 meter
Find:
Write, Wavelength of electromagnetic wave into scientific notation
Computation:
Wavelength of electromagnetic wave = 4000 meter
Wavelength of electromagnetic wave = 4.0 × 1,000 meter
Wavelength of electromagnetic wave = 4.0 × 10³
So,
Option "B" is the correct answer to the following question.
What is the rate of diffusion of NO gas to CO gas?
Answer:
0.97
Explanation:
Let R₁ represent the rate of diffusion of NO.
Let R₂ represent the rate of diffusion of CO.
Molar mass of NO (M₁) = 14 + 16 = 30 g/mol
Molar mass of CO (M₂) = 12 + 16 = 28 g/mol
Thus, the rate of NO to CO can be obtained as follow:
R₁ /R₂ = √(M₂/M₁)
R₁ /R₂ = √(28/30)
R₁ /R₂ = √(28/30)
R₁ /R₂ = 0.97
R₁ : R₂ = 0.97
NO : CO = 0.97
Therefore, the rate of diffusion of NO to CO is 0.97
The chemical equation for zinc in hydrochloric acid is: Zn + HCI = ZnCl2 + H2
Does the above equation demonstrate the law of conservation of mass as it is currently written? Explain why or why not.
Answer: No it does not
Explanation:
The law of conservation of mass states that mass is neither created nor destroyed and in this equation you start with 1 molecule of Cl and 1 of H, but on the reactants side you end up with 2 of each. To make it follow the law of conservation of mass you would have to balance the equation
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation:
How many grams of LiF are needed to make 87 g LiF solution into a
34.5% solution?
solution?
answer options:
30 g LIF
0.01 g LIF
45.8 g LIF
0.02 g LIF
Answer: 30 g LiF
Explanation:
The concentration of carbon-14 in a piece of wood from an ancient burial mound indicates that two half-lives of this radioisotope have passed. If the half-life (t 1/2) for carbon-14 is 5730 years, approximately how many years ago did this sample of wood die?
If the half-life for carbon-14 is 5730 years, then it will take 11,460 years to complete die of this sample.
What is half life period?Half life period is a time of decay in which concentration of reactant is left half of its initial concentration, means half of the reactant will convert into product.
Total time of decay will be calculated as:
T = (t)ⁿ, where
t = half life time = 5730 years
n = number of half lives = 2 (given)
On putting values, we get
T = (5730)² = 11,460 years
Hence required time for decay is 11,460 years.
To know more about half life time, visit the below link:
https://brainly.com/question/2320811
Answer:
The first part is 5 and the second part is 28,650
An ideal gas is contained in a cylinder with a volume of 5.0x102 mL at a temperature of 30°C and a pressure of 710. Torr. The gas is then compressed to a volume of 25 mL, and the temperature is raised to 820° C. What is the new pressure of the gas?
Answer:
51207 torr is the new pressure of the gas
Explanation:
We can solve this question using combined gas law that states:
P1V1T2 = P2V2T1
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas
Computing the values of the problem:
P1 = 710torr
V1 = 5.0x10²mL
T1 = 273.15 + 30°C = 303.15K
P2 = ?
V2 = 25mL
T2 = 273.15 + 820°C = 1093.15K
Replacing:
710torr*5.0x10²mL*1093.15K = P2*25mL*303.15K
3.881x10⁸torr*mL*K = P2 * 7.579x10³mL*K
P2 = 51207 torr is the new pressure of the gas
Which effects would many organisms likely experience if global warming occurs? Check all that apply.
disrupted food webs
increased competition
increased number of glaciers
disrupted life-cycle events
forced relocation
and any MHA fan to
Answer:
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Explanation:
Global warming refers to a gradual rise in the temperature of the earth due to the increase in the concentration of greenhouse gases in the atmosphere which trap infrared radiation close to the earth.
This gradual increase in the temperature of the earth often have devastating effects on the lives of various organisms on earth. These effects include;
Disrupted food webs
increased competition
disrupted life-cycle events
forced relocation
Due to changes that occur in the ecosystem as a result of global warming, many species may be compelled to relocate from place to place. This in turn disrupts food webs and may lead to disruption of life cycle events of the concerned organisms. Decrease in the number of certain populations due to global warming may lead to increased competition among species for food.
How do you convert from grabs to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
PLEASE HELP !!!
The correct question is as follows:
How do you convert from grams to moles of a substance
1. Divide by the molar mass
2. Subtract the molar mass
3. Add the molar mass
4. Multiple by the molar mass
Answer: In order to convert from grams to moles of a substance divide by the molar mass.
Explanation:
The number of moles of a substance is the mass of substance in grams divided by its molar mass.
The formula to calculate moles is as follows.
[tex]Moles = \frac{mass}{molar mass}[/tex]
This means that grams are converted to moles when grams is divided by molar mass.
Thus, we can conclude that in order to convert from grams to moles of a substance divide by the molar mass.
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
Answer:
The muscoloskeletal system
Explanation:
The musculoskeletal system is made up of the body's bones (the skeleton), muscles, cartilage, tendons, ligaments, joints, and other connective tissue that supports and binds tissues and organs together. Its primary functions include supporting the body, allowing motion, and protecting vital organs.
How many grams of NaCl are in 1.25 X 1024
molecules of Naci? Use one decimal place
Answer:
121.1g
Explanation:
First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number
That is, n = number of molecules ÷ 6.02 × 10²³
n = 1.25 X 10²⁴ ÷ 6.02 × 10²³
n = 1.25/6.02 × 10^ (24-23)
n = 0.207 × 10¹
n = 2.07moles
Using the formula; mole = mass ÷ molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
mass = molar mass × mole
mass = 58.5 × 2.07
mass = 121.1g
PLEASE PLEASE HELP CHEMISTRY
Sulfur (2.56 grams) was burned in a calorimeter with excess 02(g) . The temperature increased from 21.25C to 26.72C. The bomb had a heat capacity of 923 J/C, and the calorimeter contained 815 grams of water
Calculate the heat evolved as the sulfur burned:
Calculate the heat per mole of SO2 formed in the course of the reaction
S(s) + O2 (g) SO2 (g)
is A tomato smells rotten a chemical
reaction
Answer:
yup
Explanation:
because chemical change took place
the reaction cant be reversible
the tissue which continually forms new cells in plants
Answer:
Meristematic Tissues. Tissues where cells are constantly dividing are called meristems or meristematic tissues. These regions produce new cells.
Explanation:
thank me later
Explain why for static electricity to occur between two surfaces that are rubbed against each other, one of the materials has to be an insulator
When two surface come in contact and rub each other a frictional force causing them s deformation and this leads to a voltage giving rise to a static charge.
What is static charge?Static charge is developed within a body temporarily with an induced polarization. These charges are not moving and set into a pole in the material.
When two materials rub against each other in which one is a conductor and other to be an insulator, they will attract by the induced polarization. Rubbing causes the free electrons in the condutor to be transferred towards the insulator.
This will cause a deformation that, the random charges in the material get polarized where the electrons in the insulator will repel to the opposite pol and positive charges will align in a pole close to the condutor.
This charge separation causes the positive pole of the insulator gets attracted into the conductor surface. Hence, there forms a static electricity by the passage of electron.
To find more on static electricity, refer here:
https://brainly.com/question/12791045
#SPJ5
Energy that is made from the power of moving water
a
b
ОООО
wind
hydroelectric
coal
с
d
biomass
Hydroelectric energy is produced.
Mole ratios used for conversions come from?
What is diffusion? How does the motion of gas molecules explain how a gas diffuses throughout a room?
Answer:
Diffusion in gases
Diffusion is driven by differences in concentration. When chemical substances such as perfume are let loose in a room, their particles mix with the particles of air. The particles of smelly gas are free to move quickly in all directions
Explanation:
hope this helps
Another term for natural radioactive decay into another element is
Answer:
The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus
Answer:
radioactive disintegration
Explanation:
conclusion on friendship
Explanation:
Conclusion. A good friendship is very difficult to come across. That is why we should appreciate this divine relationship that is based on understanding and feelings. ... A true friend is one of the most precious possessions that one can have in his life.Hope it's helpful for Yuh bro!!
Answer:
Friendship is, in many respects, a "comfortable" love relationship. Friendships involve as little or as much intimacy as the partners are inclined to express at any given time. Friends are not normally obligated to exchange benefits, but do so in ways that are often so natural as to be unwitting. The ties that bind them are by unfettered mutual consent. In spite of its being so comfortable, in fact because of it, friendship contributes in unique ways .
A sample of O2 with an initial temperature of 50.0 oC and a volume of 105 L is cooled to -25 oC. The new pressure is 105.4 kPa and the new volume is 55.0 L. What was the initial pressure of the sample? Show your work, using the G.U.E.S.S. method.
Answer:
71.92 kPa
Explanation:
Using the combined gas law equation;
P1V1/T1 = P2V2/T2
Where;
P1 = initial pressure (kPa)
P2 = final pressure (kPa)
V1 = initial volume (L)
V2 = final volume (L)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
T1 = 50°C = 50 + 273 = 323K
V1 = 105L
T2 = -25°C = -25 + 273 = 248K
P2 = 105.4 kPa
P1 = ?
V2 = 55.0 L
Using P1V1/T1 = P2V2/T2
P1 × 105/323 = 105.4 × 55/248
105P1/323 = 5797/248
0.325P1 = 23.375
P1 = 23.375 ÷ 0.325
P1 = 71.92 kPa
When 1 mol of methane is burned at constant pressure, −890 kJ/mol of energy is released as heat. If a 1.67 g sample of methane is burned at constant pressure, what will be the value of ∆H
Answer:
[tex]\Delta H=-92.7kJ[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer that 890 kJ of energy are released when 1 mole of methane is burned; however, to find the total heat when 1.67 grams are burned, we first need to calculate the moles in this mass of methane:
[tex]1.67gCH_4*\frac{1molCH_4}{16.04gCH_4}=0.104molCH_4[/tex]
And thus, for calculating the resulting ∆H, we proceed as follows:
[tex]\Delta H=-890kJ/mol*0.104mol\\\\\Delta H=-92.7kJ[/tex]
Regards!
Electrical charge of an alpha particle is,
A. +1
B. +2
C. +3
D. +4
Pls answer this Il give brainiest question in picture ty
Answer:
c
Explanation:
troposphere is the answer
Para este mismo ejercicio, si se administran 2.5 litros de está solución (2,500ml) en un intervalo de 24 horas que cantidad en gramos de paciente en un día?
Answer:
Se administran 2500 gramos de solución por día.
Explanation:
Dado
Volumen de la solución = 2,5 litros
Como sabemos 1 litro = 1000 gramos
Por lo tanto, 2.5 litros = 2500 gramos
Se administran 2,5 litros en un intervalo de 24 horas o 1 día.
De ahí que se pueda decir que se administran 2500 gramos de solución al día.