why the iron nail not rusted on a chemical to absorb water vapour
Answer:
Thus there was no accumulation of ions on the nails, as the dissolved gases were already removed, hence no rust formation. In test tube C, a chemical was added to absorb the water vapour. We know that rust formation takes place when a metal is exposed to water vapour.
Explanation:i hope u have a wonderful night and stays safe
What is the relationship between melting/boiling point and intermolecular forces
Which of the following factors is the most in-
fluential in the formation of soil?
HELPPPPPP!!
Protons are a subatomic particle. Which description below accurately describes a proton's charge, location, and mass?
a) A proton is in the nucleus, has no charge, and atomic mass of 1 amu.
b) A proton is outside the nucleus, has a negative charge, and is so small it doesn't contribute to the mass.
c) A proton is in the nucleus, has a positive charge, and an atomic mass of 1 amu.
d) A proton is outside the nucleus, has a positive charge, and is so small it doesn't contribute to the mass.
Answer: C) a proton is in the nucleus, has a positive charge, and an atomic mass of 1 amu.
Explanation:
Protons are positive so they give a positive charge, they are also never outside of the nucleus. Only electrons are outside the nucleus.
Please! I need this quick! THANK YOU!!
Answer:
Force
Explanation:
The force is applied to either pushing or pulling forwarding momentum and movement.
Answer:
A: Force
It is a push/pull that changes the motion of an object
Consider the reaction Mg₂Si(s) + 4 H₂O(ℓ) → 2 Mg(OH)₂(aq) + SiH₄(g). How many grams of silane gas (SiH₄) are formed if 25.0 g of Mg₂Si reacts with excess H₂O?
Answer:
10.60 grams of silane gas are formed.
Explanation:
From the reaction:
Mg₂Si(s) + 4H₂O(l) → 2Mg(OH)₂(aq) + SiH₄(g)
We know that the limiting reactant is Mg₂Si, so to find the mass of SiH₄ formed we need to calculate the number of moles of Mg₂Si:
[tex]\eta_{Mg_{2}Si} = \frac{m_{Mg_{2}Si}}{M_{Mg_{2}Si}}[/tex]
Where:
m: is the mass of Mg₂Si = 25.0 g
M: is the molar mass of Mg₂Si = 76.69 g/mol
[tex]\eta_{Mg_{2}Si} = \frac{m_{Mg_{2}Si}}{M_{Mg_{2}Si}} = \frac{25.0 g}{76.69 g/mol} = 0.33 moles[/tex]
Now, the stoichiometric relation between Mg₂Si and SiH₄ is 1:1 so:
[tex] \eta_{Mg_{2}Si} = \eta_{SiH_{4}} = 0.33 moles [/tex]
Finally, the mass of SiH₄ is:
[tex] m_{SiH_{4}} = \eta_{SiH_{4}}*M_{SiH_{4}} = 0.33 moles*32.12 g/mol = 10.60 g [/tex]
Therefore, 10.60 grams of silane gas are formed.
I hope it helps you!
Which organelle in cytoplasm is responsible for carrying hereditary information?
Answer:
Nucleus
Explanation:
The nucleus serves as the cells command center, sending direction to the cell to grow, mature, divide, or die
When a coil of wire is connected to a battery, an electric current flows through it.
True
false
Fe2O3(s) + 3CO(g) → 3CO2(g) + 2Fe(s)
If 6 moles of CO reacted with excess Fe2O3, then how many moles of Fe were produced?
Answer:
4 moles Fe(s)
Explanation:
Fe₂O₃(s) + 3CO(g) → 3CO₂(g) + 2Fe(s)
Reaction shows a 3:2 ratio between CO(g) & Fe(s) ...
∴moles of Fe(s) produced = 2/3(6) moles Fe(s) produced = 4 moles Fe(s)
I need help someone plz
Answer:It has 8grams of hydrgen
Explanation:
Need quick! Please help rn! THANK YOU!
Answer:
B. Unbalanced force
Explanation:
Answer:
I think its unbalanced force
Explanation:
crazy what a quick go.ogle search can do! :)
Two or more substances combined but not chemically, are called what?
Answer:
a mixture
Explanation:
Two or more substances combined chemically, are called a compound
sound travels slower in colder air than it does in warmer air why does the speed of sound depend on air temperature
Answer:
Explanation:
The speed of sound in the air mainly depends on temperature. At high altitudes, where it is much colder, sound travels slower. The higher the temperature, the faster the air molecules are moving to begin with, and the quicker they bump into each other as a sound wave passes through.
Answer:
Air molecules have more energy at higher temperature which means they vibrate faster
How is a compound different from a mixture?
A. Mixtures are created through physical changes; compounds are created through chemical reactions.
B. Compounds are created through physical changes; mixtures are created through chemical reactions.
C. Mixtures, on average, are heavier than compounds.
D. Compounds, on average, are heavier than mixtures.
HELP PLEASE || TEN PTS WILL MARK BRAINLEST ||Reaction B could produce a substance with a pH of...
Group of answer choices
4.
14.
10.
7.
Answer:
the answer is 4
Explanation:
i took the test and got it right and i would recommend using quizlet it has these flash cards and the answers are there you just click on the one that says your question and it will say your answer on the back. It helps with most of my test! Hope this helps (:
how many moles of MgO can be made from 10 moles of fe2O3?
Answer:
Fe 2 O3 .
Explanation:
What are chemical formulaes?
give your own response!!
Answer:
is a way of presenting information about the chemical proportions of atoms
Explanation:
which basic postulates of Dalton's atomic theory are modified by the modern atomic theory
Answer:
Dalton's atomic theory has been modified as
Explanation:
Atoms of same element may not have same atomic mass. For example, some atoms of chlorine have atomic mass 35 amu while others have atomic mass 37 amu. Such atoms of same element having different atomic masses are called isotopes
Answer:
On the basis of new experimental facts, Dalton's atomic theory has been modified as: ... Atoms of same element may not have same atomic mass. For example, some atoms of chlorine have atomic mass 35 amu while others have atomic mass 37 amu. Such atoms of same element having different atomic masses are called isotopes.
Explanation:
Plz mark brainliest thanks
Arrange these Alkaline Earth metals from lowest to highest electronegativity: Ca, Be, Ba, Sr
Ca is -2
Be is stabilized
Ba is -4
Sr is -3
so it would be => Ba, Sr, Ca, Be
have a wonderful day! :)
The arrangement of the alkaline earth metals from the lowest to highest electronegativity is; Ba< Sr< Ca<Be
Electronegativity refers to the ability of the atoms of an element in a compound to attract the shared electrons of that bond towards itself. It is a property that decreases down the group but increases across the period.
Electronegativity increases across the period as atoms of elements become smaller in size and decreases down the group because of increase in distance between the valence electrons and nucleus.
Since electronegativity decreases down the group, the order of electronegativity from lowest to highest is; Ba< Sr< Ca<Be
Learn more: https://brainly.com/question/2060520
Kindly Help Please!
Can you write the symbol equations for each of the reactions below:
and Can you balance them?
1) Ethane + Oxygen = Carbon Dioxide + Water
2) Butane + Oxygen = Carbon Dioxide + Water
3) Octane + Oxygen = Carbon Dioxide + water
4) Decane + Oxygen = Carbon Dioxide + Water
thank you!
Answer: 1) [tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
2) [tex]2C_4H_{10}+13O_2\rightarrow 8CO_2+10H_2O[/tex]
3) [tex]2C_8H_{18}+25O_2\rightarrow 16CO_2+18H_2O[/tex]
4)[tex]2C_{10}H_{22}+31O_2\rightarrow 20CO_2+22H_2O[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side.
The balanced chemical reactions will be:
1) Ethane + Oxygen = Carbon Dioxide + Water : [tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
2) Butane + Oxygen = Carbon Dioxide + Water : [tex]2C_4H_{10}+13O_2\rightarrow 8CO_2+10H_2O[/tex]
3) Octane + Oxygen = Carbon Dioxide + water: [tex]2C_8H_{18}+25O_2\rightarrow 16CO_2+18H_2O[/tex]
4) Decane + Oxygen = Carbon Dioxide + Water : [tex]2C_{10}H_{22}+31O_2\rightarrow 20CO_2+22H_2O[/tex]
NEED HELP!!! pls help mee :)
Red is dominant to white for flower color in a particular plant. If a red flowered plant (RR) is crossed with a white flowered plant (rr), what color will the offspring be?
Answer:
The offspring will all have red-colored flowers
Explanation:
A dominant character is one that is always expressed when it is present.
A recessive character or trait is one that is only expressed in the absence of the dominant character. Thus, when the dominant and recessive character are both present in an organism, the recessive character will be hidden while the dominant character will be expressed.
According to Menedel's laws of inheritance, in the cross between the dominant (RR) red-flowered plant and the recessive (rr) white-flowered plant, the genotype of the offspring will be as follows:
RR x rr = Rr, Rr, Rr,Rr
The offspring are all heterozygous for flower color. However, since red flower color is dominant over white flower color, all the offspring produced will have red-colored flowers.
A volume of 20.0L of oxygen is warmed from -30.0C to SATP condition. What is the new volume if the pressure is kept constant
What is the van't hoff factor of C7H7NO?
Answer:
i = 1
Explanation:
Van't Hoff factor (i) is explained as the number of ions dissolved in solution.
It is needed to determine colligative properties which depend on the amount of solute.
C₇H₇NO is an organic compound → benzamide
All the organic compound have 1, as Van't Hoff factor.
In order to predict i, you consider ionic salts. For example:
AlCl₃
CaCl₂
NH₄NO₃
When you dissociate them, you determine i:
AlCl₃ → Al³⁺ + 3Cl⁻ i =4
CaCl₂ → Ca²⁺ + 2Cl⁻ i = 3
NH₄NO₃ → NH₄⁺ + NO₃⁻ i =2
The van't Hoff's factor of C₇H₇NO is 1
Van't Hoff factorThe Van't Hoff factor denoted with the symbol i is the number of ions dissolved in solution.
Non electrolyte (such as organic compounds) generally have van't Hoff's factor as 1The Van't Hoff's factor for ionic compounds varies with the number of ions in the solution. How to determine the Van't Hoff's factor for C₇H₇NOC₇H₇NO (benzamide) is an organic compound and as such, it have a Van't Hoff's factor of 1
Learn more about Van't Hoff's factor:
https://brainly.com/question/23764376
Difference girteen tungsten and nichrome
Answer:Tungsten is made of tungsten while Nichrome is made of nickel chromium. ... Tungsten is used to make filament of bulbs. Nichrome have high resistivity than tungsten.
Explanation:i hope u have a wonderful night and stay safe
What is the molarity of NaOH if 300.mL of
5.00M HCl is titrated with 200.mL of NaOH?
Water forms according to the equation below: 2H2(g) + O2(g) 2H2O(g) Hrxn = -483.64 kJ How much energy is released during the formation of 1 mol H2O(g)?
Answer:
Hrxn = -241.82 kJ
Explanation:
2H2(g) + O2(g) --> 2H2O(g) Hrxn = -483.64 kJ ............. (i)
The equation for formation of 1 mol of H2O is given as;
H2(g) + 1/2O2(g) --> H2O(g) ................. (ii)
Eqn (ii) is obtained by dividing eqn (i) by 2
That means the heat of reaction for eqn (ii) is given as;
Hrxn = -483.64 kJ / 2
Hrxn = -241.82 kJ
Answer:-241.82 kJ
Explanation:
your welcome kaylee and have a great day ;)
How do movement of rocks cause earthquakes?
Answer:
Well its actually the movement of tectonic plates under the earths surface that when the slide along each other, pull away from each other, or push up against each other they create earth quakes.
Explanation: yes.
(HELP ASAP) what is the reaction for Si + S₈ --> Si₂S₄
Answer:
Synthesis reaction~~~~~~~
Explanation:
The diagram shows the different models of the atom that eventually led to the modern atomic theory.
Which model was proposed as a result of Rutherford's scattering experiment where positive particles did not pass straight through a foil as expected? (5 points)
Model A
Model B
Model C
Model D
Answer:
B.
Explanation:
The atomic model represents the position of the sub-atomic particles. Model A was proposed after Rutherford's scattering experiment where the positive particles were deflected in the middle. Thus, option A is correct.
What was Rutherford's atomic model?Rutherford's atomic model proposed the presence of the positive nucleus in the middle of the atom while the electrons surrounded them in their orbitals with a negative charge.
He performed the scattering experiment where alpha particles emitted by the radioactive element were used to locate the positions of the electrons, neutrons, and protons.
According to the experiment, model A, best fits as the nucleus made of protons and neutrons takes the center of the atom with negative electrons surrounding them. The nucleus is small as compared to the entire atom.
Therefore, option A. model A best proposes Rutherford's model.
Learn more about Rutherford's model here:
https://brainly.com/question/17941604
#SPJ2