The growth of a plant toward light is called _____.
phototropism
tropism
geotropism
It's called phototropism
Answer:
The answer is (Phototropism)
Why should a hypothesis be testable?
A. It must be testable in order to be found true or false.
B. It must be testable for the outcome to be predictable.
C. It must be testable for other scientists to consider it reliable.
D. It must be testable if it is to become a scientific theory.
How much heat is required to raise the temperature of a 6.21 g sample of iron from 25.0 oC to 79.8 oC?
Answer:
151.1J
Explanation:
Given parameters:
Mass of iron = 6.21g
Initial temperature of iron = 25°C
Final temperature of iron = 79.8°C
Unknown:
Amount of heat = ?
Solution:
The amount of heat require to cause this temperature can be determined using the expression below;
H = m c (T₂ - T₁)
H is the amount of heat
m is the mass
c is the specific heat capacity
T is the temperature
Specific heat capacity of iron 0.444J/g°C
Insert the parameters and solve;
H = 6.21 x 0.444 x (79.8 - 25)
H = 151.1J
In your own words, please explain how to name acids.
Answer:
Acids are named based on their anion — the ion attached to the hydrogen. In simple binary acids, one ion is attached to hydrogen. Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them.
2. What properties do all acids have?
3. Why should you never use taste as a method for testing an unknown substance?
4. What is used to detect the presence of acids?
10. What can you use to detect the presence of a base?
11. What are some common bases that we use every day?
12. How does an antacid help reduce heartburn?
13. What happens when acid and base are mixed
14. What is used to determine the pH of a substance?
15. Describe how the pH scale works. In other words, what is it actually measuring?
17. Why is pH important to our environment?
18. Describe how salt is formed.
Pls help!!!!!
Which models of the atom does the experimental evidence from Bohr's hydrogen experiment support? Explain why these models are compatible with the experimental results.
The models are Daltons, Thompsons, and Rutherfords
Answer:
Rutherfords
Explanation:
The model of the atom supported by Bohr's hydrogen experiment is the Rutherford's model of the atom.
Rutherford through his experiment on gold foil suggested the atomic model of the atom. The model posits that an atom has a small positively charged center(nucleus) where nearly all the mass is concentrated.
Surrounding the nucleus is the large space containing electrons. In the Bohr's model of the atom, he suggested that the extranuclear space of the atom is made up of electrons in specific spherical orbits around the nucleus.please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
3. Does the siren of a moving police car seem to change pitch to the
police officers inside the car? Why or why not?
Answer:
As the police car moves towards them, the pitch of the police car's siren goes up because the sound waves get closer together in front of the police car. When the police car moves away from the person, the pitch goes down because the waves spread out behind the police and that makes the frequency go down.
Explanation:
Calculate the percent composition of C6H12O6
Answer:
Did you just let your cat walk on your keyboard? XD
Could you explain this a bit better please?
I'll answer the question in the replies of this comment if you can give me a bit more information.
Explanation:
May I have brainliest please? :)
how is a solute and a solvent different
When the following equation is balanced, what is the coefficiant for Br?
___I2 +___NaBr rightwards arrow___NaI +_?_Br2
A.
6
B.
3
C.
1
D.
2
1 points
QUESTION 10
The previous question is an example of what type of chemical reaction?
A.
Synthesis
B.
Decomposition
C.
Single Re-Placement
D.
Double Re-Placement
Answer:
1. A 2. C
Explanation:
because it just is
Which of the following equations is not balanced?
Explanation:
i think the answer is first and last
Calculate how much Carbon Dioxide IN GRAMS needs to be absorbed to
release 500g of oxygen during photosynthesis.
Answer:
687.5 g of CO2
Explanation:
We'll begin by writing the balanced equation for photosynthesis. This is illustrated below:
6CO2 + 6H2O —> C6H12O6 + 6O2
Next, we shall determine the mass of CO2 absorbed and the mass of O2 released from the balanced equation. This is illustrated below:
Mass of CO2 = 12 + (2 × 16) = 12 + 32
= 44 g/mol
Mass of CO2 from the balanced equation = 6 × 44 = 264 g
Molar mass of O2 = 2 × 16 = 32 g/mol
Mass of O2 from the balanced equation = 6 × 32 = 192 g
Summary:
From the balanced equation above,
264 g of CO2 were absorbed to release 192 g of O2.
Finally, we shall determine the mass of CO2 absorbed to release 500 g of O2. This can be obtained as follow:
From the balanced equation above,
264 g of CO2 were absorbed to release 192 g of O2.
Therefore, Xg of CO2 will be absorbed to release 500 g of O2 i.e
Xg of CO2 = (264 × 500)/192
Xg of CO2 = 687.5 g
Thus, 687.5 g of CO2 will be absorbed to release 500 g of O2.
Question 14
1 pts
How many moles of NaCl could be found in 0.4 L of a 0.9 M solution? Round your answer to
two decimal places.
Answer:
0.36mol
Explanation:
Given parameters:
Volume of NaCl = 0.4L
Molarity = 0.9M
Unknown:
Number of moles = ?
Solution:
To find the number of moles, the molarity of a solution is the amount of solute contained in a solution.
Molarity = [tex]\frac{number of moles}{volume}[/tex]
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.4 x 0.9 = 0.36mol
10 g of copper is heated and the mass increases to 12.5 g. What is the mass of the copper in the new substances?
Answer:
10g
Explanation:
The amount of copper in the heated mass of the new substance produced is still 10g because in any chemical action, mass is always conserved.
According to the law of conservation of matter "matter is neither created nor destroyed in a chemical reaction". The change in mass is only due to oxygen gas that combines with the new copper formed or other substances that joined the mass. The substance will still have the same amount of copper as the original one. Since we started with 10g of copper, we end with 10g of copper.Below is a phase diagram for Carbon Dioxide. Use this diagram to answer the following question.
In this example we will start the Carbon Dioxide out at a temperature of -20oC and 1 atm of pressure. If the pressure was raised to 100 atm of pressure while still staying at -20oC, what phases would the Carbon Dioxide change between?
PLEASE HELP ME !!!!!!!
Answer:
it would be 5,045
Explanation:
because it is closer to 5,000. pls correct me if wrong
Write the electron configuration for the electrons identified by the following quantum numbers:
a) 2, 1, 0, -½
b) 4, 2, 0, -½
c) 5, 3, 2, -½
Thanks!
Answer:
see the answer at the pic
The electron configuration for the electrons as listed are:
a) 1s² 2s² 2p⁵ = 9X
b) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d⁸ = 46 X
c) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p⁶ 7s² 5f¹⁴
Using the quantum numbers of the identified electrons to derive the electron configuration ( the representation of the distribution of electrons in the orbit of an atom ) electron configuration of electrons can be calculated using the formula :2n².
where n = orbit number and the various energy levels are represented as 1,2,3,4... while shells of the an atom is written as K,L,M,N
hence the electron configuration of the electrons identified by the quantum numbers are as written above.
Learn more : https://brainly.com/question/20974986
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation:
A wave is a _____that transfers _____ through a ______
A.) medium, disturbance, energy
B.) disturbance, energy, medium
C.) energy, disturbance, medium
D.)disturbance, medium, energy
A wave is a disturbance that transfers energy through a medium. There
are types of such as sound and light waves.
A wave involves the transfer of energy such as sound, light waves etc
through a medium. The medium could be through liquids , solids or air and
they have characteristic waves which pass through them.
When a wave transfers energy through a medium, the matter involved
doesn't experience any type of movement.
Read more on https://brainly.com/question/19210453
How many orbitals surround the nucleus in a neutral atom of sulfur (S)?
1
3
5
6
how do i do the chemicals
you have to put them togeter
PLEASE HELP!!!!!!!!
Step 4: Create Lewis dot diagrams.
a) Draw Lewis dot diagrams of the reactants and products on the paper with your chemical equation.
b) Select a different color to use for each element in the chemical reaction. Use your chosen color
for the element’s symbol and for its valence electrons.
c) Label these diagrams “Lewis Dot Diagrams.”
Answer:
Hey student your question is not proper arrange, i don't understand what you want us to do
I WILL GIVE BRANLIEST What factor is the temperature in an ecosystem? Abiotic or Biotic?
Answer:abiotic .
Explanation:
Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²MQuestion 4 of 10
What is the molarity of a solution of 3 moles (mol) of FeBr3 in 1/2 L water?
A.
3 mol/2L
B.
2L/3 mol
C.
0.5L/3 mol
D.
3 mol/0.5 L
SUBMIT
Answer:
B
Explanation:
Answer:
D. 3 mol/0.5 L
Explanation:
Just took the quiz
Please help i will give brainliest
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
What are the coefficients that will balance the skeleton equation below?
___GaF3 +___KCN rightwards arrow___Ga(CN)3 + ___KF
A.
1, 3, 1, 3
B.
3, 1, 3, 1
C.
1, 1, 1, 3
D.
1, 3, 3, 1
1 points
QUESTION 6
The previous question is an example of what type of chemical equation?
A.
Synthesis
B.
Decomposition
C.
Single Re-Placement
D.
Double Re-Placement
1, 3, 1, 3
Explanation:
Ga - one on both sides
F - three on both sides
CN - three on both sides
K - three on both sides
But remember that CN was being multiplied by 3 on the right side already, meaning GA(CN)3 didn't mean a coefficient.
Answer:
Double re-placement
The two metals switched dance partners, that means it's a double.
How are elements and compounds a part of our daily lives?
Answer:
Aluminium (A1) -Used in the production of duralumin alloy for use in the construction of aeroplane bodies. 3. Silicon (Si) -To make microchips 4. Sulphur (S) -To make matches, fireworks and for the manufacture of sulphuric acid 5.
Explanation:
Hope this helped!
Answer:
yes
Explanation:
we use different elements and compounds in our life ex salt and iron but most of the substances found in our environment are mixture btw scientists need to classified substances to work with our substances and to study pure substances hope it helps u