this is what i usually do -
watch videos based on the topic and take notesread articles based on the topic watch documentaries based on the topicthis is what works best for me it may work different for you but using these methods i'm able to do well on tests without really memorizing much
hope that helps :)
Answer:
its good
Explanation:
it's great vsvhebejehsdhdbehhebehdbeh
The total number of d orbitals in the third principal energy
level is
Answer:
Five.
Explanation:
The third principal energy level has one s orbital, three p orbitals, and five d orbitals, which can each hold up to 10 electrons. This allows for a maximum of 18 electrons.
How does peer review affect research?
Experimental results will be trusted by the scientific community only if they have been peer-reviewed. Thus, option A is correct.
What is research?Research is the creation of new knowledge and/or the use of existing knowledge in a new and creative way so as to generate new concepts and understandings.
“Peer-reviewed” means that the paper is analyzed by fellow scientists, who evaluate the logic or methodology that might shed doubt on the findings.
Learn more about the research here:
https://brainly.com/question/14389222
#SPJ2
1.
What is the chemical symbol for silver?
Answer:
Explanation:
Ag
Describe to me the difference on an
atomic/particle level between a Solid and a Gas.
ANSWER ASAPP
What causes the motion of particles? And more energy equals what?
Answer:
particles in solids are always vibrating (moving back and forth) in place the vibrational motion of particles in solids is kinetic energy heat makes the particles in a solid vibrate faster, giving them more kinetic energy faster-vibrating particles bump into one another more often and hit each other harder
PLEASEEE ANSWERRR FASTT
Number 5 is metal & number 6 is nonmetals
Explanation:
When exposed to very high temperatures, metals like iron can be turned into fluids that flow and can be poured into molds. What happens within the iron to allow it to flow?
Answer: the particle vibrate
!
If a substance has a mass of 12.50 g and takes up 3.4 mL of space, what is the density?
Answer:
The answer is
3.68 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} [/tex]From the question
mass of substance = 12.50 g
volume = 3.4 mL
The density of the substance is
[tex]density = \frac{12.50}{3.4} \\ = 3.676470588...[/tex]
We have the final answer as
3.68 g/mLHope this helps you
1. Identify the layer of Earth that is made primarily of silicon and oxygen.
Crust
Mantle
Core
Answer:The crust
Explanation:
HELP ASAP
What is volume? O A. The measure of the amount of space a substance takes up B. The measure of the amount of space per unit of volume O C. The measure of the amount of matter per unit of volume O D. The measure of the amount of matter in a substance
Answer:
A. The measure of the amount of space a substance takes up
Explanation:
What most likely occurred during this demonstration?
In a science demonstration, a teacher mixed zinc (Zn)
with hydrogen chloride (HCI) in a flask and quickly
attached a balloon over the mouth of the flask Bubbles
formed in the solution and the balloon inflated,
O The Zn and HCl both retained their identity
Either Zn or HCI, but not both, retained its identity
O Evaporation of one of the substances occurred
One or more new substances formed
Answer:
Hydrogen gas and a salt formed at the end of the reaction.
Explanation:
Hydrogen Gas has formed which inflated the balloon
Usually, metals and acids react to form a salt and Hydrogen Gas.
Here's what happened:
Zn (s) + 2HCl (aq) → [tex]ZnCl_2[/tex](aq) +[tex]H_2[/tex](g)
Cheers :)
Answer:
One or more new substances formed.
Explanation:
This is an example of a chemical property because bubbles formed, and the mixture produced a gas which allowed the balloon to inflate. The production of bubbles is an indicator of a chemical change. When a chemical change occurs, one or more new substances form as a result.
- I took the quiz and got 100%
Hope this helps!
I need help with this question. Will give 5 stars
Answer:
yes
Explanation:
4. Who discovered the proton?
Answer:
ernest rutherford
Explanation:
Which property refers to how a mineral reflects light?
Luster is how the surface of a mineral reflects light. It is not the same thing as color, so it crucial to distinguish luster from color. For example, a mineral described as “shiny yellow” is being described in terms of luster (“shiny”) and color (“yellow”), which are two different physical properties.
Answer:
It is definitly Luster
Explanation:
How shiny something is or how its acts in the sun
Match the labels to the
diagram
Cell
Vacuole
membrane
Nucleus
Endoplasmic
reticulum
Ribosomes
Lysosome
Golgi
body
Mitochondrion
Answer: For the first blank, that is the endoplasmic reticulum
For the second, it is lysosome
For the third blank, it is the cell membrane
For the fourth, it is the ribosomes
For the fifth, that is the vacuole
For the sixth, that is mitochondrion
For the seventh, that is Golgi body
And lastly the eighth, it is the nucleus
It goes in a circle from top left to top right
What the other guy said
it is very much correct
PLEASE GIVE THEM BRAINLIEST THEY DESERVE IT!!
What is the net charge of a nitrogen atom with 8 electrons
Answer:
– 1
Explanation:
From the question given above, we obtained the following:
Electron = 8
Net charge of nitrogen =.?
Nitrogen has atomic number of 7. This also means that nitrogen has 7 proton because atomic number of an element is the equal to number of protons in the atom of the element.
Thus, we can obtain the net charge of nitrogen with 8 electrons by calculating the difference between the protons and electrons of the nitrogen atom. This can be obtained as follow:
Proton = 7
Electron = 8
Net charge = Proton – Electron
Net charge = 7 – 8
Net charge = – 1
Therefore, the net charge of the nitrogen atom with 8 electrons is – 1
Why do some objects that collide have different effects from the equal force that occur due to the collision ?
Answer:
In a collision between two objects, both objects experience forces that are equal in magnitude and opposite in direction.
Before you start an investigation, you see the Hazard symbol for Electrical Hazard. What safety steps should you follow when conducting this investigation?
Explanation:
Safety hazards means they are are the unsafe working conditions which can cause the workmen injury, illness, or death. Safety hazards are some of the most common risks at the workplace.
Electrical hazards may be defined as a place or a condition which is dangerous and where a person working can come in contact with electrical contact with some energized equipment or any electrical conductor. There is always danger or a chance for the workmen to get injury or get a flash burn while working.
The safety steps are :
1. Follow the instruction properly
2. Take proper safety measures like wearing gloves, shoes, not touching any live wires, etc.
3. Follow the clean up procedure properly.
Answer:
The safety steps are :
1. Follow the instruction properly
2. Take proper safety measures like wearing gloves, shoes, not touching any live wires, etc.
3. Follow the clean up procedure properly.
Explanation:
Why do atoms always contain the same number of electrons and protons?
Answer:
An electron is a negatively charged subatomic particle and a proton is a positively charged subatomic particle. Positive charge(s) attract negative charge(s) and vice versa. The proton and neutron stay together and attract one another to give the atom an overall charge of zero (neutral). Which is the charge of an atom. When there is an unequal number of protons and neutrons an ion is formed. If the number of protons are more than the electron, a positively charged ion called cation is formed. On the other hand, if the number of electrons are more than the protons a negatively charged ion called anion is formed.
Answer:
When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral. ... Chemically, we say that the atoms have formed bonds.
Explanation:
A scientist grew bacteria on gel in her lab.
She wanted to find out if bacteria would grow faster on gel A or gel B.
she placed a few bacteria on gel A and a few on gel B.
After 24 hours, she observed how many bacteria were present.
Identify the independent and dependent variables.
Answer:
The independent variable is type of gel and the dependent variable is the number of bacteria.
Explanation:
An experiment generally tests how one variable is affected by another. The affected variable is called the dependent variable. In the plant experiment shown above, the dependent variable is plant growth. The variable that affects the dependent variable is called the independent variable. In the plant experiment, the independent variable could be fertilizer—some plants will get fertilizer, others will not. The scientists change the amount of the independent variable (the fertilizer) to observe the effects on the dependent variable (plant growth). An experiment needs to be run simultaneously in which no fertilizer is given to the plant. This would be known as a control experiment. In any experiment, other factors that might affect the dependent variable must be controlled. In the plant experiment, what factors do you think should be controlled? (Hint: What other factors might affect plant growth?)
Q1.What is the mass of 5 moles Of 1.Mg 2.CaCO3 Q2. Calculate the number of atoms in 10g of Na Q3.calculate the number of molecules in 10g of NaCl Q.4.What is Avogadro's number? How many number of atoms are present in 4g of Oxygen?
Answer:
Explanation:
Q1) as we know that moles=given mass/molar mass
mass of 5 moles of Mg is
mass =moles*molar mass
mass=5*24
mass=120 g
mass of 5 moles of CaCO3 is
mass= moles*molar mass
mass=5*100=500
Q2) number of atoms in 10 g Na
first we need number of moles of sodium
moles =mass/molar mass
moles=10/23=0.43
now we know that moles=number of atoms /avogadro number
for number of atom the formula become
number of atom=moles*avogadro number
number of atom=0.43*6.023*10^23=2.6*10^23
Q3)number of molecule in 10 g of NaCl
again we need number of moles of NaCl
moles=given mass/molar mass
moles=10/58.5=0.17
now number of molecules=moles*avogadro number
number of molecules=0.17*6.023*10^23=1.02*10^23
Q4) avogadro number is the number of particles(atoms,molecules,ions) present in one mole of a substance its value is 6.023*10^23
Q5)Number of atoms in 4g of oxygen
again we need number of moles of oxygen
moles=mass/molar mass
moles=4/16=0.25
now number of atoms=moles*avogadro number
number of atoms=0.25*6.023*10^23 =1.5*10^23
two samples of the same material are touching directly.
1.) Name the process is happening
2.) Describe in what direction the heat will flow and why
Answer:
1) The process that occurs were two items are in direct contact with each other is known as conduction. Conduction is the form of heat transfer that occurs or requires the direct contact of two bodies before it can take place
2) In heat transfer, heat would flow from the hotter sample sample through the process of conduction until thermal equilibrium is established
Explanation:
help me slove this question
which places have more kinetic energy than potential energy
Answer:
usually at a higher place or height as in at the highest point on a roller coaster.
Explanation:
Something made of all one material
Answer:
element
Explanation:
an element is something made up of only one type of atom
What happens to the price of the mineral that was extracted when mining companies are required to reclaim the land that they used for mining? Please help me.
Does it go down
Increase
No effect
Or stays the same
Answer:
innerdisactive react to be step counter function.
Explanation:
i feel
describe the trend in viscosity of hydrocarbon fuels
Answer:
Hydrocarbons are the chemical compound that contain the elements carbon and hydrogen only.
They are compounds that are obtained from the fossil fuel crude oil by a process called fractional distillation.
Question 8 Multiple Choice Worth 1 points)
(01 03 LC)
How is volume calculated given mass and density?
Sum of mass and density
O Mass divided by density
Mass multiplied by density
O Difference of mass and density
A what is the answer and
What is the application of Complexometric titration?
Explanation:
Complexometric titration (sometimes chelatometry) is a form of volumetric analysis in which the formation of a colored complex is used to indicate the end point of a titration. Complexometric titrations are particularly useful for the determination of a mixture of different metal ions in solution.
hope it will help u ✌️
Summarize the process a scientist goes through to come up with a
satisfactory solution.
6. An alloy of iron contains 75.0% iron and 25.0% other elements. How many grams of iron are present in 150. g of the alloy?
Answer:
108.5
Explanation:
half of 150 is 75 and half of that is 32.5. Add that to 75 and you'll get your answer
112.5 g of iron is present in the alloy.
From the question given above, the following data were obtained:
Percentage of iron (Fe) = 75%
Percentage of other elements = 25%
Mass of the alloy = 150 g
Mass of iron (Fe) =?The mass of the iron present in the alloy can be obtained as follow:
[tex]Percentage = \frac{mass of element }{total mass }\\\\[/tex]
75% = [tex]\frac{mass of Fe}{150}[/tex]
[tex]0.75 = \frac{mass of Fe}{150}\\\\[/tex]
Cross multiply
Mass of Fe = 0.75 × 150
Mass of Fe = 112.5 gTherefore, 112.5 g of iron is present in the alloy.
Learn more: https://brainly.com/question/8474670