Answer:
-371 degrees f
Explanation:
-371 degrees F.
speeds on Uranus range from 90 to 360 mph and the planet's average temperature is a frigid -353 degrees F. The coldest temperature found in Uranus' lower atmosphere so far is -371 degrees F., which rivals Neptune's frigid temperatures.
(hope this helps can i plz have brainlist :D hehe)
determine the density of an object that is 25 cm long 10 cm wide and 2 cm high with a mass of 50 g
Answer:
[tex]\boxed {\boxed {\sf \rho= 0.1 \ g/cm^3 }}[/tex]
Explanation:
Density is found by dividing the mass by the volume.
[tex]\rho=\frac{m}{v}[/tex]
The mass is 50 grams, but we have to find the volume.
Assuming this is a solid rectangular object, we can use this formula for volume:
[tex]v=l*w*h[/tex]
The length is 25 centimeters, the width is 10 centimeters, and the height is 2 centimeters.
[tex]v= 25 \ cm * 10 \ cm * 2 \ cm[/tex]
[tex]v= 250 \ cm^2 * 2 \ cm[/tex]
[tex]v= 500 \ cm^3[/tex]
Now we know the mass and volume:
[tex]m= 50 \ g\\v= 500 \ cm^3[/tex]
Substitute the values into the formula.
[tex]\rho = \frac{50 \ g}{500 \ cm^3}[/tex]
[tex]\rho= 0.1 \ g/cm^3[/tex]
The density of the object is 0.1 grams per cubic centimeter.
The element with the atomic mass of 12 amu, and 6 nuetrons: (E2) A (B3) (D4) O (14)
Answer:like my photo bc i like it
Explanation:
omg i look .........................................
name and define the quantity represented by H
Answer:
Molar enthalpy change, the enthalpy change for one mole of a pure substance
Explanation: i think
Which of the following is an example of a chemical element a. Salt B.water c.sugar d.sodium
Answer:
the answer is sodium
Explanation:
hope this helps
A camper pours 500 g of coffee, initially in a pot at 80 oC, into a 110-g aluminum cup initially at 30 oC. What is the final temperature? Assume that coffee has the same specific heat as water and that no heat is exchanged with the surroundings. (cwater=4.18 J/goC). (cAluminum=0.900J/g.C)
The final temperature : t=77.74 °C
Further explanationGiven
500 g coffee, t = 80 °C
110 g aluminum cup, t = 30 °C
Required
The final temperature
Solution
Q in = Q out
Q absorbed = Q released
Q aluminum cup = Q coffee
110 x 0.9 x (t-30)=500 x 4.18 x (80-t)
99t-2970=167200-2090t
2189t=170170
t=77.74 °C
How many c atoms are there in 5K2CO3
Answer:
8 atoms.
Explanation:
37 grams of H3PO4 ????
Answer:
76 grams is the correct answer to this question
48g of methane was burned in an excess of air. What mass of carbon dioxide would be produced in the reaction assuming complete combustion? Use the information below to answer the question.
Answer:
132g
Explanation:
CH4= 12+4=16
moles= m/Mr moles=48/16=3 mol
CO2= Mr=44
there are the same number of moles as methane:
Mass= Mrxmoles
44x3=132g
The mass of the carbon dioxide produced by the combustion of the 48 g of methane is equal to 132 g.
What is the combustion reaction?Combustion reaction involves the complete oxidation of the hydrocarbon such reactions generally release only carbon dioxide and water as products.
A hydrocarbon undergoes combustion to produce carbon dioxide and water as the product. No other side products are formed in the combustion reaction.
The given combustion reaction of the methane can be written as follows:
CH₄ + 2 O₂ → CO₂ + 2H₂O
Given the amount of methane for combustion = 48 g
The molar mass of methane = 16g/mol
The molar mass of the carbon dioxide, CO₂ = 44g/mol
16 grams of methane produce carbon dioxide = 44g
The 48 grams of methane will produce CO₂ = (44/16) ×48 = 132 g
Therefore, the mass of 132 g of carbon dioxide is produced by the combustion of 48g of methane.
Learn more about combustion reactions, here:
brainly.com/question/12172040
#SPJ2
Pl help it’s for a grade I will give Brainly if right
Answer:
A. moving
Explanation:
Place each noble gas symbol in front of the appropriate partial electron configuration to create an accurate electron configuration.
The noble gas that precedes a given partial electron configuration must itself have an electron configuration that is complete up to the partial electron configuration. The noble gas's electron configuration should, when fully written out right before the partial electron configuration, give us a valid electron configuration for some element.
For the first series, the highest principal energy level has the number 4, so our noble gas should at least be one that is in the third period (numerically, the energy level is the same as the period number). That noble gas would be argon. The partial electron configuration given is not that of a noble gas (note: all noble gases have an electron configuration that contains Np⁶, where N = the highest principal energy level). So, the noble gas that appropriately precedes our first partial electron configuration is [Ar].
Argon's electron configuration is 1s²2s²2p⁶3s²3p⁶. Using the Aufbau Principle, 4s² would correctly follow 3p⁶. [Ar]4s²3d¹⁰4p² is equivalent to writing out 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p²; either way, this would happen to be the electron configuration of germanium.
Now that we hopefully have our fundamentals down, we can apply them to figure out the noble gases that precede the remaining partial electron configurations.
[Kr]5s²4d¹⁰5p⁵: This is the electron configuration of iodine.
[He]2s²2p⁵: This is the electron configuration of fluorine.
[Xe]6s²4f¹⁴5d¹⁰6p²: This is the electron configuration of lead.
[Ne]3s²2: This is the electron configuration of magnesium.
You can fit 25 drops of substance X on a penny and 12 drops of substance Y on a different penny. Explain the difference in terms of strength of IMF.
Answer:
In the experiment performed involving the number of liquid drops that a penny can hold, 25 drops of substance X can fit in a penny while only 12 drops of substance Y can fit on another penny because, substance X is more viscous than substance Y. Thus, the intermolecular forces present in substance X are stronger than those present in substance Y.
Explanation:
Intermolecular forces (IMF) are the forces which exist between the neighboring molecules of a a substance. These forces, though weaker than intramolecular forces which acts between neighboring atoms, they still are responsible for several differences in the physical properties of substances with comparatively similar molecular masses.
The three major types of intermolecular forces are, hydrogen bonding, dipole–dipole interactions and London dispersion forces.
The existence of intermolecular forces in molecules of substances results in increase in melting and boiling points, surface tension, capillary action, viscosity, as well as surface area of substances,
Viscosity, which is the resistance to flow offered by a liquid increases with increase in the intermolecular forces between the molecules of a liquid.
In the experiment performed involving the number of liquid drops that a penny can hold, 25 drops of substance X can fit in a penny while only 12 drops of substance Y can fit on another penny because, substance X is more viscous than substance Y. Thus, the intermolecular forces present in substance X are stronger than those present in substance Y.
In the levels of organization of plants, What are the 2 tissues and their functions?
Which location of the moon relative to the sun and earth may produce a lunar eclipse?
A) A
B) B
C) C
D) D
Answer:
Its just C
Also because its infront of the sun
An object with a mass of 4.0 kg has a force of 12.0 newtons applied to it. What is the resultant acceleration of the object?
Help me?? :(
Answer:
3m/s²
Explanation:
Force applied to an object can be calculated thus;
F = ma
Where;
F = force applied (Newtons)
m = mass of substance (kg)
a = acceleration (m/s²)
According to the information provided in this question, F = 12.0 newtons, m = 4.0 kg, a = ?
Derived from F = m.a
We have; a = F/m
a = 12/4
a = 3
The resultant acceleration of the object is 3m/s².
Select the correct answer.
Which phrase describes a polymer?
A.
a branching structure containing 10 carbon atoms and 22 hydrogen atoms
B.
a crystal containing many sodium ions and many fluoride ions
C.
a long chain of carbon atoms with hydrogen atoms attached to them
D.
a molecule containing six carbon atoms arranged in a ring structure
E.
a single atom of calcium bonded to two atoms of chlorine
C. a long chain of carbon atoms with hydrogen atoms attached to them.
Explanation:
Answer:
C.
a long chain of carbon atoms with hydrogen atoms attached to it
Objects can be charged when electrons move from one object to another by direct contact 1.Charging by conduction (contact) 2.Charging by conduction (contact), , 3.Charging by friction 4.Static electricity charging by induction
Answer:
Charging by conduction (contact)
Static electricity charging by induction
Explanation:
A body can be charged when another body is made to touch it such that charges are transferred from a charged body to an uncharged body. This is known as charging by contact.
A body can also be charged by induction. In this case, a charged body is only brought near an uncharged body without really touching the uncharged body. Charges are transferred without physical contact of the bodies.
Answer:
the one above is correct
Explanation:
-no need-
What is the systematic name and molecular formula of these two:
Answer:
2,4-di Ethyl-2-methylpentane
C10H22
3,4 dimethyl heptane
C9H20
Explanation:
17) In a 0.450 M HONH2 solution, [OH] = 5.28 x 10-6 M.
HONH2(aq) + H20(1) HONH3(aq) + OH(aq)
a. Find [HONH3).
b. Find Kb.
c. Find pOH.
d. Find H.
e. Find the percent ionization of HONH, in a 0.450 MHONH2 solution.
f. What concentration of NaOH would be required to make a solution with
the same pH that was calculated in part d.?
g. Find the percent ionization of NaOH in the above solution.
Answer:
Given
[HONH2] = 0.45M
[OH-] = 5.26 x 10-6 M
HONH2 + H2O -------------> HONH3+ + OH-
Initial 0.45 55 0 0
at equilibrium 0.45-x 55-x x x
Given
[OH-] = x = 5.26 x 10-6 M
Therefore [HONH3+] = x = 5.26 x 10-6 M
pOH = -log[OH-] = -log(5.26 x 10-6) = 5.279
=> pH = 14- pOH = 8.72
From hendersen-hasselbach equaiton
8.72 = pKa + log(0.45/5.26 x 10-6)
=> pKa = 3.788
=> pKb = 14-3.788 = 10.21
percent of ionization = 5.26 x 10-6 * 100/0.45 = 1.17 x 10-3 %
concentration of NaOH required to make the same pH= [OH-] = 5.26 x 10-6 M
Percent of ionization of NaOH = [OH-]*100/NaOH = 5.26 x 10-6 *100/5.26 x 10-6 = 100%
Which statement best explains the type of bond that will form between two elements from group 6A in the model?
A. The two elements will form a covalent bond because both elements will share a single electron in order to have full outer shells
B. The two elements will form a covalent bond because both elements will share a pair of electrons in order to have full outer shells.
C. The two elements will form an ionic bond because one of the elements will donate one electron to the other element in order to have full outer shells.
D. The two elements will form an ionic bind because one of the elements will donate two electrons to the other elements in order to have full outer shells.
*Will give brainliest*
Answer:
D is the answer
Like my answer
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the correct option is option D.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond.
The two elements will form an ionic bind because one of the elements will donate two electrons to the other elements in order to have full outer shells.
Therefore, the correct option is option D.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
Write the name of CO
Answer:
cobalt
Explanation:
What is the percent composition of nitrogen in a 2.57 g sample of Al(NO3)3?
Answer:
19.8% of Nitrogen
Explanation:
In the Al(NO₃)₃ there are:
1 atom of Al
3 atoms of N
And 9 atoms of O
The molar mass of Al(NO₃)₃ is:
1 Al * (26.98g/mol) = 26.98g/mol
3 N * (14g/mol) = 42g/mol
9 O * (16g/mol) = 144g/mol
26.98 + 42 + 144 = 212.98g/mol
We can do a conversion using these molar masses to find the mass of nitrogen is the sample, that is:
2.57g * (42g/mol / 212.98g/mol) =
0.51g N
Percent composition of nitrogen is:
0.51g N / 2.57g * 100
= 19.8% of Nitrogen
List the difference between 3 allotropes of carbon
Answer:
Diamond, graphite and fullerness
Explanation:
Diamond is clear and transparent but graphite is black and opaque
2. A sample of oxygen gas is placed in a rigid 1.5L glass container at STP. If the gas is
heated to 100 degrees (Celcius) what is the new pressure in mmHg?
The new pressure : P₂ = 1038.39 mmHg
Further explanationGiven
1.5 L container at STP
Heated to 100 °C
Required
The new pressure
Solution
Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure).
So P₁ = 1 atm = 760 mmHg
T₁ = 273 K
T₂ = 100 °C+273 = 373 K
Gay Lussac's Law
When the volume is not changed, the gas pressure is proportional to its absolute temperature
[tex]\tt \dfrac{P_1}{T_1}=\dfrac{P_2}{T_2}[/tex]
Input the value :
P₂=(P₁.T₂)/T₁
P₂=(760 x 373)/273
P₂ = 1038.39 mmHg
you were stranded on an island with your little brother or little sister and the only thing you have saved in your bag are a plastic envelope with two sheets of bond paper and a roll of sewing thread while waiting for somebody to rescue you how can you use that you materials to cheer up your brother
Answer:
well with that you can make a water maker that might make you brother happy because it will keep him alive
Explanation:
Answer:
you could sew a doll for him
or you could punch him in the face and tell him to cheer up
Explanation:
19.The Alkali and Alkaline Earth metals belong to which columns, respectively?
a.Column IA & IIA
b.Column VIIA & Column VIIIA
c.Column IIIA & IVA
Answer:
the alkali and the alkaline earth metals comprise the first two columns periodic table traditionally referred to as groups IA and iia. respectively (figure, 1).
Explanation:
the alkaline and alkali earth metals are a group of elements in the periodic table
what special requirements would a helicopter rotor need to have in order to make a helicopter flight possible on the red planet.
Answer:
Explanation:
may u explain what u mean then i will be able to help u because i like knows this but what u mean will be better so i can tell u the right answer thanks have a good day
Why does the periodic table have the shape it has
Answer: The arrangement of electrons in atoms is responsible for the shape of the periodic table.
Explanation: Electron configurations can be predicted by the position of an atom on the periodic table.
O_O O_O O_O
Add me as a freind!!! <3
The periodic table has the shape it has because the elements are arranged according to their atomic number, which is the number of protons in the nucleus of an atom.
The chemical elements are arranged in a periodic table in ascending order of atomic number, allowing one to observe trends in the elements' properties.
Here are some of the reasons why the periodic table has the shape it has:
The number of protons in the nucleus of an atom determines its chemical properties. Elements with similar numbers of protons have similar chemical properties, so they are grouped together in the periodic table.The number of electron shells in an atom determines its size and its reactivity. Elements with the same number of electron shells have similar sizes and reactivities, so they are grouped together in the periodic table.The number of valence electrons in an atom determines its chemical bonding. Elements with the same number of valence electrons have similar chemical bonding properties, so they are grouped together in the periodic table.The periodic table is a valuable tool for understanding the chemical properties of the elements.
Therefore, above mentioned are some of the reasons why periodic table has the shape it has.
Learn more about atom here;
https://brainly.com/question/13654549
#SPJ6
Wow! The future is amazing. Wormholes allow travel to distant planets in a flash. In fact, you can vacation just about anywhere in the universe. I’ve been scoping out one planet in particular. The brochure says it has warm oceans, giant beaches, and incredible scenery, like nothing you’d see on Earth. The resort I want to go to is located in the planet’s Southern Hemisphere, and I want to make sure I go at the right time. Maybe you can help me. Here’s what I know. The planet, called Cryxxlyx, is tilted on its axis at 90 degrees relative to its sun. It takes about 400 days for the planet to complete one orbit of its sun. Does it matter when during its orbit I go to that resort? I’ve drawn a little diagram of the planet and its orbit. I’ve also marked the location of the resort. Remember, I want warm temperatures and lots of sunshine.
Answer:
OMG HOW COOL
Explanation:
11. Acids are described as being because they dissolve some metals.
Answer:
Corosive
Explanation:
CORRECT
Answer:
Corosive
Explanation:
Hope this will help
How does the rate of temperature change depend on the temperature difference of the two beakers?
Answer:
give it your all but know your limits
Explanation: