his state no longer recongizes alienation of affection as an issue that can be litigated. which motion should

Friction Force Calculation.

(a) The horizontal force required to accelerate the blocks at 1.4 m/s² is the combined force of friction acting on the three blocks. To find this force, we need to know the coefficient of friction between the blocks and the surface.
According to Table 5.1, the coefficient of friction for oak on oak is 0.4. To find the force of friction, we use the equation: friction force = coefficient of friction * normal force.
The normal force is the force acting perpendicular to the surface and is equal to the combined weight of the three blocks, which is

ma + mb + mc = 4.0 kg + 6.0 kg + 3.0 kg = 13.0 kg. The force of friction is then: friction force = 0.4 * 13.0 kg * 9.8 m/s² = 52.24 N.

(b) To find the force exerted by ma on mc, we need to find the force of friction acting on ma and mc. The force of friction on ma is: friction force = coefficient of friction * normal force = 0.4 * 4.0 kg * 9.8 m/s² = 15.68 N.

The force of friction on mc is: friction force = coefficient of friction * normal force = 0.4 * 3.0 kg * 9.8 m/s² = 11.76 N.

The force exerted by ma on mc is the force of friction on ma + the force of friction on mc = 15.68 N + 11.76 N = 27.44 N

(c) To find the force exerted by mc on ma, we can use the same method as above. The force of friction on mc is: friction force = coefficient of friction * normal force = 0.4 * 3.0 kg * 9.8 m/s² = 11.76 N.

The force of friction on ma is: friction force = coefficient of friction * normal force = 0.4 * 4.0 kg * 9.8 m/s² = 15.68 N.

The force exerted by mc on ma is the force of friction on mc + the force of friction on ma = 11.76 N + 15.68 N = 27.44 N

Learn more about : friction force
https://brainly.com/question/24386803

A hypothetical planet has seven times the mass of Earth and twice the radius of Earth.

what is  hypothetical planet?

To learn more about planet refers to;

https://brainly.com/question/30280519

#SPJ4

The acceleration increases as the graph becomes more steep. A horizontal line indicates a constant speed of motion for the object. The object is slowing down when the line slopes downward.

Motion is the change in an object's location with relation to time. Motion can be heard in a book dropping off a table, water running from the faucet, rattling windows, etc. Even the air we breathe is in motion!

Motion in physics is the shift in an object's location in relation to its environment over a specific period of time. Following phrases can be used to describe how a mass-containing object moves: Displacement. Distance. Speed.

To know more about Motion visit:

https://brainly.com/question/22810476

#SPJ1

(a) Energy per photon is [tex]3.8 x 10^{-19 }J[/tex] and Number of photons per second is [tex]2.63 x 10^{20}[/tex] photons/s.

A 100-W yellow lightbulb emitting at 550 nm has a wavelength of [tex]550 x 10^{-9 }[/tex]meters. The energy per photon can be calculated using the relationship:

Energy per photon = h * c / wavelength

where h is Planck's constant ([tex]6.62607015 x 10^{-34} Js[/tex]) and c is the speed of light (299792458 m/s).

Substitute the values:

Energy per photon = [tex](6.62607015 x 10^{-34} Js) * (299792458 m/s) / (550 x 10^{-9} m)[/tex]

Energy per photon = [tex]3.8 x 10^{-19 }J[/tex]

To calculate the number of photons emitted per second, we can use the relationship:

Number of photons per second = Power / Energy per photon

By substituting the values:

Number of photons per second = [tex]100 W / (3.8 x 10^{-19} J)[/tex]

Number of photons per second = [tex]2.63 x 10^{20}[/tex] photons/s

(b) Energy per photon is [tex]2.0 x 10^{-25 }J[/tex] and Number of photons per second is [tex]5.0 x 10^{25}[/tex] photons/s

A 1-kW microwave source emitting at a wavelength of 1 cm has a wavelength of 1 x 10^-2 meters. The energy per photon can be calculated using the same relationship as before:

Energy per photon = h * c / wavelength

Energy per photon = [tex](6.62607015 x 10^{-34} Js) * (299792458 m/s) / (1 x 10^{-2} m)[/tex]

Energy per photon = [tex]2.0 x 10^{-25 }J[/tex]

To calculate the number of photons emitted per second, we can use the same relationship as before:

Number of photons per second = Power / Energy per photon

Number of photons per second = [tex]1000 W / (2.0 x 10^{-25} J)[/tex]

Number of photons per second = [tex]5.0 x 10^{25}[/tex] photons/s.

To learn more about photons:

https://brainly.com/question/15946945

#SPJ4

A bar magnet will pull unmagnetized iron toward it. A current loop is comparable to an atom. When placed in a bar magnet's magnetic field, a piece of iron, which has magnetic properties, aligns into two poles.

It is the north pole if the north pole reports the side in front of it, and vice versa if the south pole reports the south pole. When placed in a bar magnet's magnetic field, a piece of iron, which has magnetic properties, aligns into two poles.

An atom possesses charges that are in motion, which results in current. The rotational orbits of the atoms allow them to function as an analogous current loop. But despite the absence of current, iron is drawn to magnetic.

To know more about unmagnetized

https://brainly.com/question/16325938

#SPJ4

Answer:

-compressions

-rarefactions

Explanation: research

A positive charge and a negative charge held a certain distance apart are released and when they move, the force on each particle increases.

The charge carriers  are the positively charged proton and the negatively charged electron. The movement of any of these charged particles constitutes and explained as electric current.

When there are more or fewer protons in an atom than electrons, the substance has an electric charge. Protons have a positive charge on them, while electrons have a negative charge on them. If a substance has more protons than electrons, it is positively charged; if it has more electrons, it is negatively charged.

The SI units for charge can be written as ampere-second or coulomb.

Learn more about Charge here:

brainly.com/question/18102056

#SPJ4

Most geologist think the movement of Earth’s plates are caused by: convection currents in the mantle. Option C- is the correct answer.

This occurs as a result of differential heating. Lighter (less dense), warm material rises while heavier (more dense) cool material sinks. It is this movement that creates circulation patterns known as convection currents in the atmosphere, in water, and in the mantle of Earth.

These convection currents are in three forms namely:

Learn more about convection currents   on

https://brainly.com/question/8775667

#SPJ1

Answer:

a=2m/s^2

Explanation:

F=ma => a=F/m=100/50=2m/s^2

A michelson interferometer receives beams of monochromatic light. The central spot in the interferometer pattern changes from brilliant to dark and back to bright 1608 times as a result of the movable mirror being moved by 0.301 mm. then the light's wavelength is 3.74.

A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) in the consecutive cycles.

This length is typically set in meters in wireless systems (m) Colors that are monochromatic are all variations of a single hue, including tints, hues, and tones. Lighter and darker shades of the primary color or hue will make up a monochromatic color scheme.

d=mλ / 2

so λ = 2d/m

= {2* 0.301 *10^(-3)}/1608

λ = 0.000602/1608

λ = 3.74

Learn more about monochromatic light Visit: brainly.com/question/1581262

#SPJ4

The height of the balloon when the sandbag was released is 108m which is  moving vertically upwards with a constant speed of 3.00 m/s.

Given the constant speed of hot air balloon (v) = 3m/s

Time taken by the sandbag to fall to the ground (t) = 5s

As the balloon is moving upwards and sandbag is falling downwards they both are in motion opposite to each other.

Let the initial speed of sandbag (u) = 3m/s

Acceleration due to gravity (a) = -9.8m/s^2

From equation of motion we have: s = ut +  1/2at^2

s = 3 x 5 + 1/2(-9.8)(5)^2

s = -108m

Hence the  height of the balloon when the sandbag was released is 108m.

To learn more about speed click here https://brainly.com/question/28224010

#SPJ4

The elastic potential energy of the spring is  375 J. Option C

We have to note that the elastic potential energy has to do with the energy that has been stored in the elastic material and it can be released to do work once the spring has been stretched.

It should be noted that we would have that;

The elastic potential energy which we have shown as E is obtained from;

E = 1/2Fx

F = force applied

x = The stretching of the spring

Then

E = 0.5 * 150 * 5

E = 375 J

Learn more about elastic potential energy:https://brainly.com/question/12807194

#SPJ1

The pressure at the bottom of the water layer is 1.22 x 10⁵ Pa

The fluid's weight divided by the surface area gives an estimate of the pressure that the fluid exerts on its surroundings. The density of the fluid can be calculated by multiplying its mass by the acceleration caused by gravity. In this case, we are given that:

Depth of oil (h oil) = 80 cm = 0.8 m

Depth of water (h water) = 140 cm = 1.4 m

Density of water (ρ water) = 1000 kg/m³

Density of oil (ρ oil) = 881 kg/m³

The Standard Atmospheric Pressure (P) = 101325 Pa = 1.01 x 10⁵ Pa

To calculate the pressure due to the weight of liquid, we can use this following formula:

P= ρ g h

Where:

P = pressure

ρ = density of liquid

g = acceleration due to gravity

H = depth of the liquid

To calculate the absolute pressure at the bottom of the water layer, we use:

P(absolute)= P x [ρ(water) × h(water)× g] + [ ρ(oil) × h(oil)× g]

P(absolute) = 1.01 x10⁵ + (1000 x 1.4 x 9.8) + (881 x 0.8 x 9.8)

P(absolute) = 1.01 x10⁵ + 0.21 x 10⁵

P(absolute) = 1.22 x 10⁵ Pa

To learn more about pressure, click here:

https://brainly.com/question/13259324

#SPJ4

An experiment using gravity lead students to the conclusion that gravity affects the speed of objects.

This is thanks to the experiment that they conducted, which showed that objects fall faster when released from a higher height than when released from a lower height. This indicates that gravity is accelerating the objects as they fall.

The rate of acceleration is proportional to the force of gravity, meaning that the more gravity that is present, the faster the objects will fall. This means that the higher the height, the greater the force of gravity and the faster the objects will fall.

Students can also conclude that the time taken for an object to fall is greater from a lower height than one from a higher height. This is because the higher the height, the greater the force of gravity, meaning that the objects reach their terminal velocity quicker. Terminal velocity is the maximum speed an object will reach, and this can be reached quicker from higher heights.

Overall, students can conclude that gravity affects the speed of objects as they fall and that the higher the height, the faster the objects will fall. This is due to the force of gravity increasing with height, meaning that the objects reach their terminal velocity quicker, leading to faster falls.

Learn more about gravity here:

https://brainly.com/question/14874038

Answer:

1. Mass is the measure of the amount of matter in an object.

2. The objects do not have the same size, shape, or mass, so any differences in drop times cannot be attributed to one variable.

3. Gravity is a force that attracts objects with mass toward each other.

4. by repeating the experiment several times

5. The longer an object falls, the more gravity increases its speed.

(a) The tension T2 must be greater than the tension T1 because it is pointing downwards, supporting both masses.

(b) The acceleration of the system is 9.74 m/s².

(c) The tension in T₁ is -0.78 N and T₂ is 1.02 N.

There are two tensions in the cord and their magnitude is obtained from the following equation.

T₁ = m₁a - m₁g

T₁ = m₁ (a - g )

T₂ = m₂g - m₂a

T₂ = m₂ (g - a )

The resultant tension in the cord is determined as;

( T₂ - T₁)R = Iα

where;

( T₂ - T₁)R = I(aR)

where;

T₂ - T₁ = Ia

m₂g - m₂a - ( m₁a - m₁g ) = Ia

m₂g - m₂a - m₁a + m₁g = Ia

- m₂a - m₁a + m₂g + m₁g = Ia

a(m₂ + m₁) + Ia = m₂g + m₁g

a (m₂ + m₁ + I ) = m₂g + m₁g

a = ( m₂g + m₁g ) / ( m₂ + m₁ + I )

I = ¹/₂MR²

I = ¹/₂ x 8.6 x 0.2²

I = 0.172 kgm²

a = ( 17 x 9.8  + 13 x 9.8 ) / ( 17 + 13 + 0.172 )

a = 9.74 m/s²

The tension in the cords is calculated as;

T₁ = m₁ (a - g )

T₁ = 13 (9.74 - 9.8 )

T₁ = -0.78 N

T₂ = 17 (9.8 - 9.74 )

T₂ = 1.02 N

Learn more about tension here: https://brainly.com/question/24994188

#SPJ1

The energy to run the mechanical clock (or grandfather clock) come from the kinetic energy from a human hand.

option D.

Mechanical energy is a type of energy that a body or object possess  due to its motion or height above the ground.

There are two type of mechanical energy and they include the following;

The kinetic energy of an object is obtained when the speed of the object increases or when the object is set in motion.

To run the mechanical clock or grandfather clock, the human hand is used pedal the clock to supply the energy needed for the clock to run.

Learn more about mechanical energy here: https://brainly.com/question/24443465

#SPJ1

The very slight sound of the impact will reach the spider first, as sound travels faster than the disturbance traveling along the radial thread of the web.

The speed of sound is about 343 meters per second, while the disturbance traveling through the web is much slower.

The spider's ability to detect and react to sound is an important part of its survival, as it allows it to detect predators and other potential threats. Additionally, spiders use sound to communicate with each other and to find potential mating partners.

By understanding how sound travels and how spiders use sound to detect their environment, we can gain a better understanding of how spiders interact with their environment and how they communicate with each other.

Learn more about The speed of sound:

https://brainly.com/question/16012426

#SPJ4

Answer: I am not sure about this but here you go

he overall displacement of the particle, δx, is equal to the final position of the particle minus its initial position. Since the initial and final velocities of the particle are given, the displacement can be calculated using the equation δx = vft - vit, where vf is the final velocity, vi is the initial velocity, and t is the time interval. In this case, δx = 18.0 m/s11.5 s - 29.0 m/s11.5 s = -131 m. Therefore, the overall displacement of the particle is -131 m.

The value of g inside the earth at half of its radius is 4.9 m/s², if the value of g at the surface of the earth is 9.8 m/s².

Let the uniform density of the earth, = ρ

Radius of the earth, = R

We know the relation between the uniform density(ρ) of the earth and the acceleration due to gravity of the earth is as follows:

g = Gρ(4/3)πR

Let the value of acceleration due to gravity at (r = R/2) is g₁.

Then g₁ = Gρ(4/3)π(R/2)

g₁ = (1/2)Gρ(4/3)π(R)

g₁ = (1/2) × g

g₁ = (1/2) × 9.81 = 4.9 m/s²

Hence the correct option is 1.

To know more about density, here

https://brainly.com/question/29775886

#SPJ4

"Endurance" is the capacity to perform tasks for longer than a few minutes. Endurance, which typically refers to aerobic capacity, is the capacity to maintain an activity for prolonged periods of time.

Endurance, which typically refers to aerobic capacity, is the capacity to maintain an activity for prolonged periods of time.

The more repetitions you could perform, the stronger your muscle endurance was.

To know more about the Endurance, here

https://brainly.com/question/15585123

#SPJ4

The density of seawater at a depth where the pressure is 680 atm is 2576 kg/m3. Bulk modulus is defined to be measure of its resistance to compression.

The bulk modulus of a substance is a measure of its resistance to compression. It is defined as the ratio of the change in pressure to the resulting fractional change in volume. The density of a substance can be affected by changes in pressure. The equation to calculate density at a certain pressure is:

density = density surface x (1 + (bulk modulus x pressure) / (density surface x gravity x height surface))

where density surface is the density of the substance at the surface, bulk modulus is the bulk modulus of the substance, pressure is the pressure at a given depth, gravity is the acceleration due to gravity, and height surface is the height of the surface of the substance.

In the case of seawater:

density = 1030 kg/m3 x (1 + (2.3*10^9 N/m2 x 680 atm) / (1030 kg/m3 x 9.8 m/s^2 x 0))

density = 1030 kg/m3 x (1 + 1.502)

density = 1030 kg/m3 x 2.502

density ≈ 2576 kg/m3

So the density of seawater at a depth where the pressure is 680 atm is approximately 2576 kg/m3.

To know more about bulk modulus please refer: https://brainly.com/question/14070556

#SPJ4

Given that plutonium has an atomic mass of 244 and 94 protons per atom, there are 1.48108 C coulombs with positive charge present in 1.54 per kg plutonium.

The particle possesses an electrical charge that is positive and opposite to the electron's. A single protons would weigh only 1.673? 10-27 kilograms if it were isolated, which is just a little bit less than a neutron.

Although protons were once thought of as elementary particles, the Standard Model of subatomic particles now recognizes them as composite particles made up of three valence quark, and they are grouped alongside neutrons as hadrons.

To know more about protons visit:

https://brainly.com/question/12535409

#SPJ4

Clogged main air bleed  is the possible cause of an engine running rich at full throttle if it is equipped with a float type carburetor .

Bleed air is mostly used in civil aircraft to feed the environmental control system with air, which maintains pressure in the cabin. Bleed air is also utilised to prevent ice from forming on important sections of the aircraft, including the wing leading edges. the throttle valve of a carburetor with a float design.

This improves fuel vaporisation and discharge management, especially at low engine speeds. In the carburetor barrel, close to one end of the venturi, is where the throttle, or butterfly valve, is situated. By adjusting the airflow to the engine, it offers a way to control engine speed or power production. The float needle valve is worn or otherwise not seated if a float-type carburetor spills fuel while the engine is turned off.

For such more questions on Vehicle engine:

brainly.com/question/9505366

#SPJ4

If an engine has a float type carburetor, a clogged main air bleed could be the reason why it runs rich when the throttle is fully opened.

Bleed air is mostly utilized in civil airplanes to supply air to the environmental control system, which maintains cabin pressure. Bleed air is also used to stop ice from accumulating on critical areas of the aircraft, such as the wing leading edges. a carburetor's throttle valve with a float arrangement.

This facilitates better fuel vaporization and discharge control, particularly at low engine speeds. The butterfly valve, also known as the throttle, is located inside the carburetor barrel, close to one end of the venturi. It provides a technique to regulate engine speed or power output by changing the airflow to the engine. If a float-type carburetor leaks fuel when the engine is off, the float needle valve is worn or otherwise not seated.

Learn more about Vehicle engine visit: brainly.com/question/9505366

#SPJ4

The speed of the car is 200 km/hour.

The velocity of the car is 200 km/hour in south direction.

The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.

Distance travelled is = 150 km.

Time taken is = 45 minute = 0.75 hour.

Hence, the speed of the car is = 150/0.75 km/hour = 200 km/hour.

As  the car is traveling south, the velocity of the car is 200 km/hour in south direction.

Learn more about velocity here:

https://brainly.com/question/18084516

#SPJ1

Water vapour, or the gaseous state of water, results from the vibration of the water molecules when it is heated. Some of these water molecules escape into the air as steam as a result. It is called evaporation because of this.

What sort of transformation takes place when water boils and turns into steam?

A shift in temperature causes a physical change in water as it boils and transforms into steam.

What kind of energy is transferred to moving water in a boiling pot?

Thermal energy can be seen in the boiling of water on a stove. When a substance's atoms and molecules vibrate more quickly as a result of a rise in temperature, thermal energy is created.

What does evaporation mean?

A liquid transforms into a gas during evaporation. It is simple to picture when puddles of rain "vanish" on a hot day or when wet clothing dries in the sun. In these instances, the liquid water is evaporating into a gas known as water vapor rather than really dissipating.

Visit this link to learn more about evaporation and steam: brainly.com/question/15738157

#SPJ4

The conversion of a liquid into a gas is known as evaporation.The global water cycle includes it as one of its three key stages.

To learn more about evaporation refer

https://brainly.com/question/24258

#SPJ4

For myself and my loved ones, I would wish for good health, happiness, and success so that even if my wish did not come true, I would still have the things that matter most in life.

To interact with individuals from all over the world and fully appreciate all cultures, I would first wish for the capacity to comprehend and speak all languages with ease. This would significantly improve my capacity for international travel and communication. My second desire is for unrestricted riches and resources so that I might support charity causes, assist people in need, and have a constructive effect on society. To enjoy my money and resources and carry on having a beneficial influence on the world, a long and healthy life is my third and last wish.

learn more about wish here:

https://brainly.com/question/18404859

#SPJ4

The potential energy of the system at point A= 6 joules.

We know that there is no loss of energy when a conservative force acts on it.  The total energy is constant it is only transferred to another form which can be easily calculated.

For a conservative force

Total energy = gravitational potential energy + kinetic energy

Now calculating total energy at point B

Total energy =  21  + 0 (velocity is 0 so kinetic energy is zero)

Total energy =  21 joules

Total energy at point A

21 = gpe  +  15

gravitational potential energy = 6 joules

To learn more about potential energy

brainly.com/question/19768887

#SPJ4

Eduardo rode his bicycle 24 meters to his friends house and it took him 2 minutes to arrive at his friends house, then Eduardo's average speed was 727 meters/hour.

Average speed is calculated by dividing total distance traveled by the total amount of time it took to travel that distance.

Given distance - 24m and time is 2 minutes

convert minutes to hours

Now, Average speed = distance traveled / time traveled = 24 meters / (2 minutes / 60 minutes) = 24 meters/ 0.033 hour

Hence, Average speed = 24 / 0.033 = 727 meters/hour

So, Eduardo's average speed was 727 meters/hour.

To know more about average speed, refer

https://brainly.com/question/6504879

#SPJ1

The boundary condition at a perfectly insulated surface (at x = 0, for example) can be expressed as [latex] -k frac{partial T(0, t)}{partial x}=0 [/latex]

This node is the default boundary condition for all Heat Transfer interfaces. This boundary condition means that there is no heat flux across the boundary:

and hence specifies where the domain is well insulated. Intuitively, this equation says that the temperature gradient across the boundary is zero. For this to be true, the temperature on one side of the boundary must equal the temperature on the other side. Because there is no temperature difference across the boundary, heat cannot transfer across it. As the default boundary condition, it can be applied only on external boundaries; but when added manually, it can be applied also on interior boundaries.

Learn more about thermal insulation at https://brainly.com/question/23812426.

#SPJ4

Hence, The net electric field flux is 2. 26* 10^ 5 N m2/C.

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field. It also refers to the physical field of a charged particle system. The electric field can be thought of as an electric property associated with any point in space where a charge exists in any form. The electric force per unit charge is another way to describe an electric field. The formula for the electric field is E = F /Q. Volts per metre (V/m) is the SI unit for the electric field. This unit is the same as Newton's per coulomb. These are derived units in which Newton is a unit of force and Coulomb is a unit of charge.

Here,

Charge, Q=2.00 uC

Electric field E = 100 N/C i

Radius R = 10.0 cm

We need to find the flux. It can be calculate using Gauss's law

The flux of the net electric field,

flux=Q/E0

=2*10^-6/8.85*10^-12

=2.26*10^5 Nm²/C

Hence, The flux of the net electric field is 2. 26 × 10^5 N · m^2/C.

To know more about electric field,

https://brainly.com/question/12868371

#SPJ4