The alternative that can be utilized to change the /* missing code */ in order for the statement to compile correctly is.
List of years, The Java programming language is the subject of this query. As can be seen from the query, an ArrayList is involved. In Java, the syntax to declare an ArrayList with no specific data type is as follows: ArrayList [Name of the Lists] = new ArrayList(); The list name is now "years" in the query. Thus; The appropriate statement to replace any missing code in order to avoid mistakes is; ArrayList years is a replacement option that can be used to fill in any missing code, ensuring that the statement compiles successfully. Simply put, resizable arrays are ArrayLists. The statements (b) new ArrayList() and (c) I and III only are capable of substituting for the missing code, respectively. ArrayList creation syntax is as follows: new ArrayListType>() using the argument ArrayListType> str;
Learn more about ArrayList here:
https://brainly.com/question/29309602
#SPJ4
a design team is developing a prototype co 2 cartridge for a manufacturer of rubber rafts. this cartridge will allow a user to quickly inflate a raft.
A prototype is produced, tested, and then modified as necessary until an acceptable result is obtained from which the entire system or product can be developed using the prototyping model, which is a systems development technique.
Explain about the prototype?Developed to test a concept or procedure, a prototype is an early sample, model, or release of a product. Its usage spans a wide range of fields, including software development, design, electronics, and semantics. In most cases, system analysts and users will use a prototype to assess a new design that will improve precision.
An early or initial model of something, such a machine, is called a prototype. From the prototype, new forms are created or replicated. The prototype is what the aeronautical engineers design and test on in the research and development division of a corporation that, for instance, manufactures flying machines.
To learn more about prototype refer to:
https://brainly.com/question/27896974
#SPJ4
the hub and blades of a utility scale wind turbine form the ________, which converts wind energy into rotational energy that turns an electrical generator
An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.
What is the conversion of wind turbine energy? An electric generator is linked to the rotor, which rotates when the blades are turned by the wind.The four basic components of most wind turbines are as follows: A hub, to which the blades are fastened, rotates in tandem with them.Rotor is comprised of blades and hub.The aerodynamic force produced by a wind turbine's rotor blades—which function similarly to an airplane wing or a helicopter rotor blade—converts wind energy into electricity.Gearbox.The main bearing, main shaft, gearbox, generator, and rotor make up the drivetrain.The rotor (blades and hub assembly) of the turbine rotates at low speed and high torque, which is converted into electrical energy by the drivetrain.To learn more about electric generator refer
https://brainly.com/question/12475693
#SPJ4
Help with answering questions
Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.
What are the different types of threads?Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.The threads' crests and roots are at their tops and bottoms, respectively, with the flanks connecting them.Six of the most popular thread types:NPT and NPTF. UN/UNF.BSPP (BSP, parallel) (BSP, parallel).metric parallel BSPT, or BSP with a taper.Measured in metric.In terms of thread form, we mean the screw thread's profile.Thread standards that specify thread form, series, class, allowance, tolerance, and designation are often published per thread form.Be aware that different standards use different methods to identify screw threads.To learn more about threads refer
https://brainly.com/question/29212867
#SPJ1
using the definition of moment of inertia, calculate ib , the moment of inertia about an axis through point b, for this object. point b coincides with (the center of) one of the spheres (see the figure).
Assuming the object is composed of two spheres of radius R and mass M, the moment of inertia about an axis through point b is given by Ib = 2MR2.
Moment of Inertia
The theory used in this question is the definition of the Moment of Inertia.
This states that the moment of inertia is the rotational inertia of a body about a given rotation axis, equal to the sum of the products of the mass of each particle in the body and the square of its distance from the axis.
Step 1: Define the Moment of Inertia.
The moment of inertia (I) is the rotational inertia of a body about a given rotation axis, equal to the product of the mass of each individual body particle and the square of its angular separation from the axis.
Step 2: Identify the Object. The object consists of two spheres with radius R and mass M.
Step 3: Calculate the Moment of Inertia. Since point b coincides with the center of one of the spheres, the moment of inertia about an axis through point b is given by Ib = 2MR2.
To learn more about Moment of Inertia refer :
https://brainly.com/question/14460640
#SPJ4
When using a micron gauge, if the pressure gauge falls from 1,300 to 1,000 instantly,
the vehicle needs to:
be moved to a warmer environment.
be started up and accelerated to 1500 RPMs.
be left alone with the vacuum pump running for another hour.
None of the answers listed
Part A Is the section made by the procedure of sections 0 if a body experiences a loading component? coplanar loading scheme
What does the word "component" signify in terms of health?
Component. a series of neurons constituting a functional system for carrying the afferent and efferent impulses in the somatic and splanchnic processes of the body. The most recent revision was made on July 23rd.
The bits that make up something are its components. A nuclear weapon's essential ingredient is enriched uranium. The management strategy is composed of four key parts.
Know more about procedure, Visit:
https://brainly.com/question/27176982
#SPJ1
a buck converter has an input of 50 v and an output of 25 v. the switching frequency is 100 khz, and the output power to a load resistor is 125 w. (a) determine the duty ratio. (b) determine the value of inductance to limit the peak inductor current to 6.25 a. (c) determine the value of capacitance to limit the output voltage ripple to 0.5 percent.
Duty ratio is a ratio used to measure the amount of time that a particular device or system spends in a specific state.
The required details for Duty ratio in given paragraph
(a) Duty Ratio = Output Voltage / Input Voltage = 25 V / 50 V = 0.50
(b) Inductance, L = (Vin - Vout) / (f x Ipk) = (50 V - 25 V) / (100 kHz x 6.25 A) = 4 µH
(c) Capacitance, C = (Vin - Vout) / ((f x Ripple %) x Vout) = (50 V - 25 V) / (100 kHz x 0.005 x 25 V) = 40 µF
What is duty ratio?
This ratio is often used to measure the amount of on-time versus off-time for a device or system. For example, the duty ratio of a motor might be expressed as the amount of time the motor is running versus the amount of time it is not running. Duty ratio is also frequently used to measure the performance of a system or device, as it can provide insight into how well the system is performing. Duty ratio can be a useful indicator of system performance, as it can provide a measure of how efficiently a system is running.
Duty ratio can also be used to compare the performance of different systems, as it can be an important factor in determining the overall performance of a system.
To learn more about capacitance refer to:
brainly.com/question/27258294
#SPJ4
given a channel with intended capacity of 90 mbps, the bandwidth of the channel is 8 mhz.what signal-to-noise ratio is required to achieve this capacity?
The signal-to-noise ratio required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is 18 dB.
The signal-to-noise ratio (SNR) is a measure of the ratio of the signal power to the noise power in a communication system. The SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz can be calculated using the Shannon-Hartley theorem. According to this theorem, the SNR required to achieve a channel capacity of C Mbps with a bandwidth of B MHz is given by SNR = (C x log2(1 + S/N))/B. In this case, the SNR required to achieve a channel capacity of 90 Mbps with a bandwidth of 8 MHz is (90 x log2(1 + S/N))/8 = 18 dB.
Learn more about signal-to-noise ratio here
https://brainly.com/question/21988943
#SPJ4
particle a of charge 3.03 10-4 c is at the origin, particle b of charge -5.70 10-4 c is at (4.00 m, 0), and particle c of charge 1.05 10-4 c is at (0, 3.00 m). we wish to find the net electric force on c.
The net electric force on c is 51.05N. If a charge is subjected to two or more interactions, the net electric force is the vector sum of those individual forces.
What is net electric force?
When each vector of each electric force of those respective charges is added together, the net electrostatic force exists when any charge or particle goes against each other. Coulomb's law computes the magnitude of the force F between two point charges separated by a distance r, q1 and q2. F=k|q1q2|r²
Here,
rBC =
= 5.00 m
(FAC)ₓ = 0
(FAC)y = |FAC| = Ke (|qA||qC|)/r²AC
= (8.99 x 10⁹N.m²/C²) x (3.00 x 10⁻⁴C)(1.05 x 10⁻⁴) / (3.00m)²
= 30.05N
(FBC)y = |FBC| = Ke (|qB||qC|)/r²BC
= (8.99 x 10⁹N.m²/C²) x (5.70 x 10⁻⁴C)(1.05 x 10⁻⁴) / (5.00m)²
= 21N
Net force = 21N + 30.05N
= 51.05N
To learn more about net electric force refer to :
brainly.com/question/14284308
#SPJ4
From the following list, select all of the devices to which the Clausius statement of the second law directly applies
a) Coal-fired power plant
b) Heat pump
c) Air conditioner
d) Automobile engine
Answer:
a) Coal-fired power plant
b) Heat pump
c) Air conditioner
Answer:I hope this helps let me know if I can wrong
Explanation:
b) Heat pumpc) Air conditioner
The Clausius statement is expressed as: it is impossible to construct a device that operates in a cycle and produces no effect other than the transfer of heat from a lower-temperature body to a higher-temperature body
what was the significance of the voting rights act?
It outlawed the discriminatory voting practices adopted in many southern states after the Civil War, including literacy tests as a prerequisite to voting.
What is meant by Civil War ?
War between established parties within the same state is known as an intrastate conflict or civil war (or country). One side's objective may be to seize power in the nation or a specific area, secure regional independence, or alter governmental practices. The Latin word bellum civil, which means "war of or related to citizens," is where the term "civil war" originates. It was initially used to refer to the Roman civil conflicts of the first century BCE.
The Confederate States of America, a grouping of eleven southern states that seceded from the Union in 1860 and 1861, and the United States of America fought each other in the American Civil War.
To learn more about Civil War refer to
brainly.com/question/24992590
#SPJ4
compute the alternating sum of all elements in an array. for example, if your program reads the input 1 4 9 16 9 7 4 9 11 then it computes
The Java-based method is as follows: for(int index = myarray.length-1;) public static void Array Reverse
(int Array[]) index greater than or equal to 0; index--) System.out print (Array "index" plus ");
How should the program be computed?The method public static void Array Reverse(int Array[]) is defined on this line.
This line iterates through the array from highest to lowest index for (int index = myarray.length-1; index>=0; index--)
The system prints the elements of the array in reverse. out. print(Mary [index]+");
Reverse(mar) array;However, before the method can be called, mar must be declared and filled in as an integer array. The reverse() method returns a reference to the same array in which the first array element is now the last and the last array element is now the first. In other words, the order of the array's elements will change in the opposite direction from what was stated earlier.
How can an array array be reversed?The most fundamental method for reversing an array is to iterate through it and swap its elements in such a way that they reverse the array—for example, swap the first element for the last, swap the second element for the second last, and so on—until we reach the middle of the array.
Learn more about reverse array :
brainly.com/question/30408417
#SPJ4
The variable isOpen is to be used to indicate whether or not a store is currently open. Which of the following the most appropriate data type for isOpen?
A. Boolean
B. number
C. string
D. list
The most appropriate data type for is Open is a Boolean. Correct answer: letter A.
A Boolean is a data type that can only have one of two values, either true or false. In this case, the value of is Open would be true if the store is open, and false if it is closed.
Variables are used to store data or values in a program. There are different types of variables depending on the type of data they are used to store.
The most common types of variables are numerical variables which are used to store numeric values such as integers and floats, string variables which are used to store text or character values, Boolean variables which are used to store true or false values, and lists which are used to store multiple values. Each type of variable has its own characteristics and can be used in different ways to create more complex programs.
Learn more about Boolean:
https://brainly.com/question/26041371
#SPJ4
Trojan Horses
Revisit the permissions on the /shared_data/accounting.txt file. Bob is unable to read this file, but he would very much like to know its content.
Bob knows Alice is a fool for ASCII art, and so he creates the /shared data/bob/fun script. View and take a screenshot of this file's contents with an appropriate command (as Bob). Your output should look fun/maybe be some ASCII art.
As Bob, can you modify that script so that if Alice (or Harry) run the script, it will make a copy of the accounting.txt file in a manner that allows Bob to see the content? In other words, when Alice runs the file, Bob gets access to the file
Play around with the permissions and see how far you can get, as Bob, in gaining access to Alice's accounting.txt file. You might want to check the permissions on the /shared_data directory – check out the ls command options for the appropriate flag to do this.
Yes, Bob can change the script to copy the accounting.txt file to a location where he can see it. He can verify the permissions of the /shared_data directory with the ls -l command.
What are permissions for files?The ability to control who can access and modify files is the basis of the theory behind this question. The chmod command, as well as user and group accounts, are used to implement this crucial aspect of computer security.
The following are the procedure's steps:1: To examine the permissions of the /shared_data directory, Bob can use the command "ls -l." He will be able to check to see if Alice has granted him access to the accounting.txt file by using this method.
2: Bob can modify the permissions with the chmod command if they are incorrect. Bob will be able to read the file due to this.
3: Bob can develop a script to move the accounting.txt file to a location where he has permission to view it once he has the appropriate permissions. To create the copy, he can use the cp command.
4: Finally, Bob can change the script so that when Alice or Harry run it, the accounting.txt file will be copied in a way that lets Bob see the contents.
What does the Trojan horse virus do?A Trojan, also known as a Trojan horse, is a type of malware that deceives users into thinking a harmless file is what it really is. A Trojan's "payload" is unknown to the user, but it can serve as a delivery vehicle for a variety of threats, similar to the wooden horse used to sack Troy.
Learn more about Trojan Horses :
brainly.com/question/29757000
#SPJ4
which of the following is true about log files? group of answer choices they aid in database roll back log files are optional for each database there can be only one log file per database they should be stored on the same physical disk as data files
The following statements are true about log files:
Log files are essential for databases as they are used to keep track of all changes made to the database.Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure.There can be multiple log files per database, depending on the size and complexity of the database.Log files are essential for databases as they are used to keep track of all changes made to the database. Log files contain information about each change that is made to the database, such as the type of change (e.g. insert, update, or delete), the time of the change, and the user who made the change.
This information is used to ensure the integrity of the data, and to recover data in the case of a system crash or corruption. Log files should be stored on a separate physical disk from the data files, as they are used to recover data in the event of a failure. There can be multiple log files per database, depending on the size and complexity of the database.
Learn more about Log files:
https://brainly.com/question/4595770
#SPJ4
after passing another vehicle on the highway, what is the best indication that it is safe to retrun to the lane in front of the vehicle that is passed
If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.
A highway or highway with only one lane of traffic in each direction and typically no intermediate obstacles is referred to as a double carriageway or dual carriageway. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. Example of a two-lane road showing that passing is allowed Markers for two lanes, with overtaking allowed in both directions. A yellow centreline marking with a dash in the middle designates a two-lane road. Arrows show direction. One lane in each direction of travel. It might have been constructed thus way because to limitations or space set aside for expansion as traffic volumes rise. If five or more cars are following you while you are travelling on a two-lane roadway where passing is dangerous, turn around.
Learn more about Dual carriageway here:
https://brainly.com/question/29510481
#SPJ4
What can occur during a ping of death (POD) attack? Check all that apply.A Denial-of-Service (DoS)A buffer overflowBaitingRemote code execution
When malicious packets are sent to a target, the result can be a DoS attack, a buffer overflow, baiting, or remote code execution. This assault is known as a Ping of Death (POD) attack. Attackers may be able to access private information or disrupt operations by causing systems to crash or become unresponsive.
In a Ping of Death (POD) attack, malicious packets are sent to a target, which may result in a DoS attack, a buffer overflow, baiting, or remote code execution. A denial-of-service (DoS) attack occurs when an attacker delivers a large number of malicious packets to a target, overwhelming and impairing the target's system. When a malicious packet exceeds the buffer's size, it causes a buffer overflow, which crashes the target's machine. In order to trick a target into clicking a malicious link, an attacker will send them harmful packets. Last but not least, remote code execution occurs when a hacker can run harmful code, giving them access to confidential data or causing disruption.
Learn more about operation here-
brainly.com/question/28335468
#SPJ4
Which action can cause an increase in density that results in a deep ocean current?
Choose the correct answer.
The sun heats the water’s surface.
A warm wind blows across cold water.
An iceberg melts, adding fresh water to ocean water.
Warm water loses energy to its surroundings and cools
Answer:
An iceberg melts, adding fresh water to ocean water.
That’s the top of the worksheet.
Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.
What are the different types of threads?Simply put, the thread form is how the thread is arranged in an axial plane and is made up of the crest, root, and flanks.The threads' crests and roots are at their tops and bottoms, respectively, with the flanks connecting them.Six of the most popular thread types:NPT and NPTF. UN/UNF.BSPP (BSP, parallel) (BSP, parallel). metric parallel BSPT, or BSP with a taper.Measured in metric.In terms of thread form, we mean the screw thread's profile.Thread standards that specify thread form, series, class, allowance, tolerance, and designation are often published per thread form.Be aware that different standards use different methods to identify screw threads.To learn more about threads refer
brainly.com/question/29212867
#SPJ1
which of the following is not a technique a designer can use to understand how a user currently accomplishes a task?A. Naturalistic observationB. Focus GroupsC. SurveysD. Interviews
Answer:
B
Explanation:
B. Focus Groups is not a technique a designer can use to understand how a user currently accomplishes a task, it's a technique for gathering information and feedback from a group of people about a specific topic, product, or service.
A. Naturalistic observation is a technique where designers observe users in their natural environment, to see how they currently accomplish a task.
C. Surveys is a technique where designers ask users a series of questions to gather information about how they currently accomplish a task.
D. Interviews is a technique where designers have one-on-one conversations with users to gather information about how they currently accomplish a task.
what is providing the upward force to propel the rocket into space?
The gravity of earth
Alice and Bob, two students of CS 331, were asked to provide algorithms for a simple program.
The program is supposed to receive a stream of integers as input. After each input integer, the program must report the average of the integers it has seen so far. Alice and Bob came up with the following algorithms to do this simple task, as in Algorithm 1 and 2, respectively.
State whether Alice and Bob have provided correct algorithms, ignoring truncation due to integer division. Also, either prove the algorithm to be right, or show how it is wrong. If there are any incorrect steps in the algorithms, suggest rectifications to correct the mistake.
_________________________________________________________
__________________________________________________________
Algorithm 1: Alice's Algorithm
Initially sum is 0 and count of integers read is 0; while the input stream is not empty do
Read the integer i;
add i to the sum;
report average as sum/count;
increase count by 1;
____________________________________________________________
In the Alice's Algorithm, at every step, sum is updated and count is increased.
What is Algorithm?An algorithm is a procedure used for solving a problem or performing a computation. Algorithms act as an exact list of instructions that conduct specified actions step by step in either hardware- or software-based routines.Algorithms are widely used throughout all areas of IT. In mathematics and computer science, an algorithm usually refers to a small procedure that solves a recurrent problem. Algorithms are also used as specifications for performing data processing and play a major role in automated systems.An algorithm could be used for sorting sets of numbers or for more complicated tasks, like recommending user content on social media. Algorithms typically start with initial input and instructions that describe a specific computation. When the computation is executed, the process produces an output.To learn more about data processing refer to:
https://brainly.com/question/30094947
#SPJ4
The orifice tube should be replaced if the compressor comes apart internally because
it can catch debris from the compressor and become clogged.
true
false
The statement given is TRUE.
What is a Compressor?A compressor is a mechanical device that lowers a gas's volume while raising its pressure. One particular kind of gas compressor is an air compressor. Pumps and compressors are comparable in that both raise the pressure on a fluid and can move it through a pipe.
Hence, it can be seen that the orifice tube should be replaced if the compressor comes apart internally because it can catch debris from the compressor and become clogged.
Read more about compressors here:
https://brainly.com/question/29345949
#SPJ1
three different materials, designated a, b, and c, are tested in tension using test specimens hav- ing diameters of 0.505 in. and gage lengths of 2.0 in. (see figure). at failure, the distances between the gage marks are found to be 2.13, 2.48, and 2.78 in., respec- tively. also, at the failure cross sections, the diameters are found to be 0.484, 0.398, and 0.253 in., respectively. determine the percent elongation and percent reduction in area of each specimen. using your own judgment, classify each material as brittle or ductile.
The first material(a) is a Brittle material and The last material(c) is a Ductile material.
What is a Ductile and Brittle material ?A material's ductility refers to its capacity to withstand plastic deformation or drawing without breaking. As a result, it provides information on how "soft" or pliable the material is. The types and concentrations of alloying elements present affect the ductility of steels in different ways.
A material's susceptibility to drawing is referred to as a mechanical attribute as ductility. The degree to which a material can withstand plastic deformation under tensile stress before failing is known as ductility in the field of materials research. In engineering and manufacturing, ductility is a crucial factor.
Glass, ceramic, graphite, and certain alloys with very low plasticity are examples of brittle materials. In these materials, fractures can start without plastic deformation and quickly progress to brittle breaking.
Diameter of the materials are 0.505 in
Diameter after appling tension in each material 0.484, 0.398 and 0.253 in
Initial length of the materials are 2 in
Length after appling tension in each material 2.13, 2.48 and 2.78 in
We can observe that the first material is not elongating that much as well as is not changing its diameter that much so the material can be classified as Brittle.
Again, We can observe that the last material is elongating maximum as well as its diameter changed maximum so the material can be classified as Ductile..
To learn more about Material properties refefr to :
https://brainly.com/question/14959576
#SPJ4
using the ideas discussed in your text, in what sense are we star stuff?
Almost all of the atoms that make up our bodies were once found inside stars.We would not be here if it weren't for galaxies' ability to recycle material from one star generation to the next.
What does "star stuff" mean in the context of the concepts covered in your text? Almost all of the atoms that make up our bodies were once found inside stars.We would not be here if it weren't for galaxies' ability to recycle material from one star generation to the next.Carl Sagan wasn't using figurative language when he declared, "We're formed of star stuff."He was merely noting—in his singularly precise and poetic fashion—that the constituent parts of our physical bodies were fashioned in the cores of faraway, long-extinct stars.We can see how the universe's matter is structured on a vast scale by looking at galaxies. Scientists research how the matter is currently arranged and how that organization has changed across cosmic time in order to comprehend the nature and history of the universe.To learn more about star stuff refer
https://brainly.com/question/15162950
#SPJ4
match the algorithm with the problem that it primarily solves drag and drop options on the right-hand side and submit. for keyboard navigation...show more press space or enter to grab transitive closure warshall's algorithm transitive closure press space or enter to grab single source / single destination a* search algorithm single source / single destination press space or enter to grab single source / single destination bellman-ford algorithm single source / single destination press space or enter to grab all sources / all destinations floyd's algorithm all sources / all destinations
In a single switched network with seven switches separating, it from the target host, the source host addresses the frame to the destination host.
When defining a rule, you can specify the source and destination hosts for the traffic pattern you're trying to match. These hosts must be supplied as IP addresses, which can be done in a variety of formats such as lists or CIDR ranges, as was discussed above when discussing Snort and Suricata settings. You'll notice that in the example rule we're using, we decide to create IP addresses using the $HOME NET and $EXTERNAL NET variables. If the rule cannot be limited to a particular group of hosts, the word "any" may be used to match any hosts. In a single switched network with seven switches separating, it from the target host, the source host addresses the frame to the destination host.
Learn more about Hosts here:
https://brainly.com/question/30026661
#SPJ4
A Search Distance Heuristic Homework. Unanswered o For each method - sometimes used as heuristic, what is the distance from start to end? (Ignore any coloring in the boxes) Drag and drop options on the right-hand side and submit. For keyboard navigation...Show More Manhattan Distance V41 Chebyshev Distance = Euclidean Distance = G = 9 = 7 Fullscreen
A search distance heuristic is an algorithm used to find the shortest path between two points in a graph.
The Manhattan distance heuristic is based on the idea of moving along a grid using only horizontal and vertical steps, while the Chebyshev distance heuristic is based on the idea of moving along a grid using only diagonal steps.
The Euclidean distance heuristic is based on the idea of moving along a straight line between two points. The G-value heuristic is based on the idea of using a cost function to determine the optimal path between two points.
Learn more about the heuristic:
https://brainly.com/question/25878205
#SPJ4
How should you approach the dock when docking your vessel? A. Into the wind or current, whichever is stronger B. With the wind or current, whichever is stronger C. At regular operating speed without slowing down D. Between other vessels in heavy traffic.
The best way to approach the dock when docking your vessel is A. Into the wind or current, whichever is stronger
What is a Dock?This refers to the term that is used to describe and define the area of water between or close to one or more man-made structures that are used to handle boats, ships, or similar objects
Hence, it can be seen that according to maritime laws, it is expected that when docking a vessel, one should approach into the wind or current, whichever is stronger
Read more about docks here:
https://brainly.com/question/10782017
#SPJ1
A raised plaster cover (ofen called a plaster ring or mud ring) is permitted to increase the maximum n conductors permitted in an outlet box when it is a. listed as a box extension b. by the same manufacturer as the box c. marked with its cubic-inch volume d. metallic and capable of being grounded
Answer is option B) by the same manufacturer as the box.
What is the box of an outlet called?
The answer is based on the specifications provided by the manufacturer of the outlet box. The box of an outlet is typically called an electrical box or outlet box. It is used to house the electrical wiring and components of an outlet, such as the receptacle, switches, and wiring. It is usually made of metal or plastic to provide protection from shocks and short circuits. Outlet boxes come in various sizes and shapes depending on the type of outlet and the number of wires it needs to contain. A raised plaster cover is a device used to increase the maximum number of conductors allowed in an outlet box. It is typically listed as a box extension and marked with its cubic-inch volume.
The plaster cover must also be metallic and capable of being grounded. In order for the plaster cover to be accepted, it must be from the same manufacturer as the box.
To learn more about outlet box refer :
https://brainly.com/question/25878272
#SPJ4
a 600-lb tensile load is applied to a test coupon made from 0.625-in. flat steel plate (e=29 msi, n=0.3). determine the resulting change (a) in the 2-in. gage length, (b) in the width of portion ab of the test coupon\
The theory used in this question is Hooke's Law, which states that the amount of stress (force divided by area) applied to an object is proportional to the amount of strain (deformation of the object) caused.
a) The change in the 2-in. gage length is 0.0079 in.
b) The change in the width of portion ab of the test coupon is 0.0035 in.
What is Hooke's Law?
This means that if a certain amount of force is applied to an object, the amount of deformation will be proportional to the force. To answer the question, we can use the formula for Hooke's Law, which is:
Stress = E x Strain
where E is the Modulus of Elasticity of the material and Strain is the change in length of the object divided by its original length.
Since we know the tensile load (600 lb) and the modulus of elasticity (E = 29 msi) of the material, we can calculate the strain of the object.
Strain = Stress / E
= 600 lb / 29 msi
= 0.0207
This means that the object will be deformed by 0.0207.
We can then calculate the change in the 2-in. gage length using the formula:
Change in Length = Original Length x Strain
= 2 in. x 0.0207
= 0.0079 in.
We can similarly calculate the change in the width of portion AB of the test coupon, using the formula:
Change in Width = Original Width x Strain
= 0.625 in. x 0.0207
= 0.0035 in.
To learn more about Hooke's Law refer :
https://brainly.com/question/2648431
#SPJ4
A plane flying through the air can be modeled like a particle. Which of the following forces should be included on the free body diagram?
a. the thrust from the engines
b. the friction of the air
c. the weight of the plane
d. the lift from the wings
e. the force connecting the wing to the plane
The push from the engines, air friction, the weight of the plane, the lift from the wings, and the force attaching the wing to the plane are the forces that need to be shown on the free body diagram
A free body diagram is a technique used to examine a particle's motion by taking into account all of the forces that are exerting pressure on it. The thrust from the engines, air friction, the weight of the plane, lift from the wings, and the force linking the wing to the plane should all be represented on the free body diagram when simulating a plane traveling through the air as a particle. The force moving the plane forward is the thrust from the engines. The force that the plane must overcome to move through the air is air friction. Gravity is dragging the plane down because of the weight of the aircraft.
Learn more about plane here-
https://brainly.com/question/29511090
#SPJ4