Hey can someone pls help me answer these questions? It should be easy maybe. It’s just science. The question just won’t to know where you would put the arrow above to show the motion of the plates. Where would I put it?

Answer:

12.8

Explanation:

14 = pOH + pH

pH = 14 - pOH

pH = 14 - 1.2

pH = 12.8

Answer:

At D: Soil erosion us the process taking place.

Soil erosion is the washing away of the Earth's or soil's top layer by eroding agents.

Answer:

1.15 M

Explanation:

Step 1: Given data

Step 2: Calculate the final concentration of the solution

We want to prepare a dilute solution from a concentrated one by adding water. We can calculate the concentration of the dilute solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁/V₂

C₂ = 3.00 M × 0.125 L/0.325 L = 1.15 M

Solution :

The balanced chemical equation are

The Catabolism of the glucose takes place in five stages :

1. Glucose + [tex]$ATP$[/tex] → glucose - [tex]$6$[/tex] - phosphate [tex]$+ ADP$[/tex]  ,  [tex]$\Delta G^0=-16.7 \ kJ/mol$[/tex]

2. Glucose - [tex]$6$[/tex] - phosphate → Fructose - [tex]$6$[/tex] - phosphate ,  [tex]$\Delta G^0=1.7 \ kJ/mol$[/tex]

3. Glucose - [tex]$6$[/tex] - phosphate + [tex]$ATP$[/tex] → [tex]$ADP$[/tex] + Fructose - [tex]$1,6- \text{biophosphate}$[/tex],  [tex]$\Delta G^0=-14.2 \ kJ/mol$[/tex]

4. Fructose - [tex]$1,6- \text{biophosphate}$[/tex]  → dihydroxyacetonephosphate + glyceraldehyde  [tex]$-3 - $[/tex] phosphate,   [tex]$\Delta G^0=23.8 \ kJ/mol$[/tex]

5. Dihydroxyacetonephosphate → glyceraldehyde  [tex]$-3 - $[/tex] phosphate , [tex]$\Delta G^0=7.5 \ kJ/mol$[/tex]

Therefore, the overall net equations

Glucose + [tex]$2ATP \rightarrow$[/tex] glyceraldehyde  [tex]$-3 - $[/tex] phosphate + [tex]$2ADP$[/tex] [tex]$\Delta G^0=2.1 \ kJ/mol$[/tex]

Answer:

Explanation:

Heat is a reactant.

If the equation requires heat to occur, the reaction is endothermic

The equation would have this model

A + B + heat =====> C + D

If the equation gives away heat, then it is exothermic

The equation would look like this. (I'll use a common reaction)

CH4 + 2O2 - heat ===> CO2 + 2H2O

The heat is minus when it has to be given away.

Answer:

A. Autotrophs

Explanation:

an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.

humans and other mammals, plants, and a select few other things

Answer:

1. Distance  = 5 cm

Displacement = 1 cm

2. Distance = 7 cm

Displacement = 1 cm

3. Distance = 5 cm

Displacement = -1 cm

4. Distance  = 6 cm

Displacement = -2 cm

5. Distance  = 4 cm

Displacement = 0 cm

Explanation:

The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.

Displacement however, is a measure of how far away or apart an object is from its starting position.  It a vector quantity as it takes into account both the magnitude and direction in its measurement.

From the attachment provided, considering forward direction as positive and reverse as negative :

1. When a object moves from point 1 to point 4 and reverses to point 2.:

Distance  = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm;  3 + 2 = 5 cm

Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm;  3 - 2 = 1 cm

2. When an object moves from point 1 to 5 and reverses to 2:

Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm

Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm;  4 - 3 = 1 cm

3. When an object moves from point 1 to 3 and then reverses to 0.

Distance  = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm;  2 + 3 = 5 cm

Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm;  2 - 3 = -1 cm

4. When an object moves from point 3 to 5 and then reverses to 1:

Distance  = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm;  2 + 4 = 6 cm

Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm;  2 - 4 = -2 cm

5. When an object moves from point 2 to 4 and then reverses to 3.

Distance  = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm;  2 + 2 = 4 cm

Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm;  2 - 2 = 0 cm

Answer:

Temperature usually increases when water condenses. What behavior of water is most directly responsible for this phenomenon? The release of heat by the formation of hydrogen bonds. Hydrogen bonds stabilize and keep the of ice farther apart than the water molecules of liquid water.

Answer:

1 mole of KClO_3 contains 3 moles of O.

10 moles of O_2 contains 20 moles of O.

You need 20/3 moles of KClO_3 to produce 10 moles of O_2

Explanation:

sana makatulong

Answer:

in my opinion I think the answer the be "A"

Answer:

Baking a cake

Explanation:

Ape-x aprroved

Answer:

B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.

Explanation:

Hello there!

In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.

Best regards!

Answer:

Go to the pool , Bake, sleep, Watch ,Movies, go out with my freinds<3

Explanation:

Answer:

Look below

Explanation:

Nitrogen: N

Phosphorus: P

Bromine: Br

Zinc: Zn

Potassium: K

Magnesium: Mg

Hope this helps(would be very grateful if you mark this answer branliest bc i need for lvl up)

Answer:there different from the rocky like planets gas giants don't have such a firm surface like rocky terrestrial planets

Explanation:

Answer:

answer po Yan hope it help

Answer:

B

Explanation:The poisonous substances, present in the environment can easily get into the trophic level as living organism depends on each other and environment for food and nutrition. These poisonous substances may not be broken down in the body or excreted easily, efficiently and quickly. Instead, they accumulate in the tissues, and as the living organism eats more, the concentration of these substances increases and they pass from one trophic level to the next. The tertiary consumer being at the top of trophic levels receives the maximum pollutant. This phenomenon is known as biological magnification.

So, the correct answer is option B.

Answer:

B is correct :)

Explanation:

Trust me I just took the test

Answer:

0. 070g

Mass of 1 Si atom =28.08/6.022*1023

So mass 1.5 *1021*4.6629*10-23

Answer:

[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]

Explanation:

We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.

1. Convert Atoms to Moles

First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.

In this case, the particles are silicon atoms. We can set up a proportion.

[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Multiply by the value of atoms given.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]

Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.

[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]

[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]

[tex]0.002490866822 \ mol \ Si[/tex]

2. Convert Moles to Grams

Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).

Use this value as a ratio.

[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

Multiply by the number of moles we calculated.

[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]

The moles of silicon units cancel, so we are left with grams.

[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]

[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]

[tex]0.06995599469 \ g \ Si[/tex]

3. Round

Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.

[tex]0.069\underline95599469 \ g Si[/tex]

The 9 tells us to round the other 9 to a 0, then the 6 to a 7.

[tex]0.070 \ g \ Si[/tex]

The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.

Answer: If the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.

Explanation:

A solution which contains the maximum amount of solute is called a saturated solution. Whereas a solution in which more amount of solute is able to dissolve is called an unsaturated solution.

Now, the number of moles present in 36 g of NaCl (molar mass = 58.4 g/mol) is as follows.

[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{36 g}{58.4 g/mol}\\= 0.616 mol[/tex]

This shows that solubility of sodium chloride is 36 grams per 100 grams of water means a maximum of 0.616 mol of NaCl will dissolve in 100 mL of water.

So, a solution in which number of moles of NaCl are less than 0.616 mol per 100 mL then the solution formed will be an unsaturated solution.

[tex]Moles = \frac{5.8 mol}{1000 mL} \times 100 mL\\= 0.58 mol[/tex]

[tex]Moles = \frac{3.25 mol}{500 mL} \times 100 mL\\0.65 mol[/tex]

[tex]Moles = \frac{1.85 mol}{300 mL} \times 100 mL\\= 0.616 mol[/tex]

Thus, we can conclude that if the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.

Answer:

B. Particles of matter have spaces between them.

Explanation:

The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :

1. Matter is made of small particles of atoms or molecules.

2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.

3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.

4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.

The correct option is B.

Answer:

habitat/shelter

Explanation:

Answer:

Ka=[H+][A−]/[HA]

which solution has the lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq) :

Higher value of Ka indicates greater ionization thus more protons in solution, higher H+ concentration in solution means lower pH value.

Since HF have higher Ka have, thus HF solution will have lower pH.

The measurement is when the solution has the lower pH so HF should have higher ka.

In the given solution, it contains the  lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq).

Here higher value of Ka represents the high ionization so there should be more protons in the solutions. and, the higher h+ concentration have the lower pH value.

So in the case when HF has higher Ka, due to this, HF solution will have lower pH.

Learn more about solution here: https://brainly.com/question/14619461

Answer:

https://sensorex.com/ph-calculator/

Explanation:

go to this link and then scroll down a little bit and then you'll find the answer

Answer:

mi = 31.28 g

Explanation:

According to the law of conservation of energy:

[tex]Heat\ Gain\ by\ Ice = Heat\ Lost\ by\ Water\\m_iL = m_wC\Delta T\\[/tex]

where,

mi = mass of ice = ?

L = Latent heat of fusion of ice = 334 J/g

mw =  mass of water = 50 g

C = specific heat of water = 4.18 J/g.°C

ΔT = change in temperature of water = 75°C - 25°C = 50°C

Therefore,

[tex]m_i(334\J/g) = (50\ g)(4.18\ J/g.^oC)(50^oC)[/tex]

mi = 31.28 g

Answer:

CuSO4 cell will have the greatest amount of deposit among all three. The deposit will occur at the cathode

Explanation:

The valence of the elements in this case is as follows -

Cu - 2e-

Sn - 4e-

Cr - 3e-

CuSO4 cell will have the greatest amount of deposit among all three

The atoms of copper metal will deposit at the cathode. At the cathode, the least number of moles of electrons needed .

Hence, more amount of copper  can be extracted out by the electrolyte

Answer: Primary consumers make up the second trophic level. They are also called herbivores. They eat primary producers—plants or algae—and nothing else. For example, a grasshopper living in the Everglades is a primary consumer

Answer:

primary consumer make up the second trophic level .they are also herbivores they eat primary consumer plants or alger and nothing else .for example a grasshopper living in the everglades is a primary consumer

Answer:

SnSO₄

Explanation:

Tin(II) sulfate is a chemical compound. It is a white solid that can absorb enough moisture from the air to become fully dissolved, forming an aqueous solution; this property is known as deliquescence.

Answer:

please give me brainlist and follow

Explanation:

SnSO₄