HELP! The question is in the photo

Answer:

The energy transported by a wave is directly proportional to the square of the amplitude. So whatever change occurs in the amplitude, the square of that effect impacts the energy. This means that a doubling of the amplitude results in a quadrupling of the energy.

Explanation:

When the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.

The amplitude of a wave may be defined as the maximum displacement or distance moved by a point on a vibrating body or wave measured from its equilibrium position. It is equal to one-half the length of the vibration path.

It is the principle of physics that when the amplitude of the wave is higher, the energy also gets higher. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.

Therefore, when the energy of a wave increases, the amplitude also increases. This is because the amplitude of the wave is directly proportional to the energy of a wave.

To learn more about Energy and amplitude, refer to the link:

https://brainly.com/question/19036728

#SPJ6

Answer:

Initial velocity describes how fast an object travels when gravity first applies force on the object. On the other hand, the final velocity is a vector quantity that measures the speed and direction of a moving body after it has reached its maximum acceleration.

Explanation:

Answer:

1. The speed of the wave is affected by wavelength frequency because waves travel through a medium and sound, ocean waves and seismic waves, etc. are the physical properties of the medium that determines the speed of the mechanical waves.

2. I think the frequency of the wave doesn't have any effect on the wave speed. Only the characteristics of the medium the wave is traveling through determines its speed.

3. As a wave moves from a medium of low density to a higher density the wave speed increases and when a wave moves from a higher density to a medium density the wave speed decreases because the wave length shortens causing the wave speed to lower.

4.If the instrument is initially flat they should tighten it because once it is tightened there is going to be force applied to the gears, and after you've reached the correct pitch the gears won't be able to move. So ultimately, you will be able to meet the intended pitch you were going for.

Answer:

The amount of energy needed to melt the ice is 1670 J

hope it helpss!!!

The power generated by solar panel will be "2.7 W".

According to the question,

The values are:

Output of solar panel,

Current,

The electrical power generated will be:

→ [tex]P = VI[/tex]

By substituting the given values is the above formula, we get

→     [tex]= 10\times 0.27[/tex]

→     [tex]=2.7 \ W[/tex]

Thus the above answer is right.

Learn more about power here:

https://brainly.com/question/16642746

Answer:

1a) 857143 m

1b) 414 m

2a)

2b)

3) the medium of air has a wavelength of 0.334 m, the medium of water has a wavelength of 1.493 m, and the medium of 5.130 m.

Explanation:

Question 1a)

Given the velocity/speed, and frequency of the wave, the length can be calculated using these two quantites.

[ λ = v / f ] wavelength = velocity of the wave / frequency of the wave in Hz.

Since 3 × 10^8 × ms^-1 is the velocity, and 350Hz is the frequency.

Anything to the negative power is reciprocated. i.e ms^-1 = m/s.

The wavelength is 300000000m/350Hz = 857142.8571428..... m ≈ 857143 m

Question 1b) Given that the frequency of the second wave in water is 1% of the first wave, and the speed of the second wave is 1450ms^-1

Therefore the second wave has a frequency of 1% of 3.5 = 350/100 Hz = 3.5 Hz

The wavelength is found using the same

formula: wavelength = 1450m/3.5Hz = 414.2857142857.... m ≈ 414 m

Question 2a)

Question 2b)

Question 3) Remember, the speed of sound of the medium = frequency of the medium × wavelength of the medium.

Therefore the wavelength of the medium = speed of sound of the medium / frequency of the medium. This has a similar correlation to the wavelength formula. We are given that all these mediums have a frequency of 1KHz = 1000Hz, where So the wavelength of each medium =

Question 4)

Answer:

80 km is distance and 30km north is displacement

Explanation:

distance= 50+30=80km

displacement= 50-20=30

his displacement is 30km north

When Tyler drives 50 km north and then drives back 30 km south, we have:

1. The distance that he covers is 80 km.

2. Tylor's displacement is 20 km.  

1. The distance is a scalar that is given by the sum of the kilometers traveled by Tyler as follows:

[tex] d = d_{1} + d_{2} = 50 km + 30 km = 80 km [/tex]

Hence, the distance traveled by Tyler was 80 km.

2. The displacement is a vector that depends on the direction of travel. Takin the north direction as positive we have:

[tex] x = x_{1} + x_{2} = 50 km + (-30 km) = 20 km [/tex]

Therefore, Tyler's displacement is 20 km.

You can find more about displacement and distance here: https://brainly.com/question/4307551?referrer=searchResults

I hope it helps you!            

Answer:

W = V Q          energy = work / charge * charge

Q = I t            charge = current * time

V = W / (I * t)

V = 3 * 10E8 J / (1.5 * 10E4 amps * 2 * 10E-4 sec)

V = 10^8 volts

Stefan's distance and displacement are 11 miles and 8.54 miles southeast

The distance can be calculated directly by adding up the individual distance.

To calculate the displacement of Stefan, we make use of the Pythagoras theorem.

From Pythagoras theorem,

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

While the displacement is 8.54 miles southeast.

Hence, Stefan's distance and displacement are 11 miles and 8.54 miles southeast.

Learn more about distance and displacement here: https://brainly.com/question/17273444

Answer:

The answer is "The ball slows down in the air due to an unbalanced force "

Explanation:

If plays kick the ball, its object is mainly controlled by various forces its player's power as well as the other gravitational force, which acts in such a direction often focused from around Earth.  

Its force of its player will decrease because as strength of gravity is consistent, enabling both forces to interfere, therefore slowing the speed of football.

Answer:

t = 2.02 secs

Explanation:

Given the following data;

Height = 20m

We know that acceleration due to gravity, g = 9.8m/s²

To find the time, we would use the formula for maximum height;

H = ½gt²

Substituting into the equation, we have;

20 = ½*9.8t²

20 = 4.9t²

t² = 20/4.9

t² = 4.082

Taking the square root of both sides, we have;

t = 2.02 secs

Therefore, it would take the bullet 2.02 seconds to hit the ground.

Answer:

c

Explanation: i took the same text and got a 90

Direct current (DC) would be best because with DC, the current flows steadily in one direction.  correct   answer be Option (B).

There are two main methods for creating electric current. Direct current (DC) and alternating current (AC) are these (AC).

Direct current is a technique in which electricity consistently flows in the same direction, like the flow of a river. It discusses how electricity generated by solar panels, batteries, and other sources flows.

On the other hand, alternating current (AC) is a method in which the positive and negative sides are alternately switched at regular intervals, thereby altering the direction of the energy flow. This is the electricity that is provided by a plug-in or a generator. Both the electricity generated at power plants and the electricity delivered to homes are transmitted using alternating current.

So, Direct current (DC) would be best for LED lights will only work if the current is flowing in one direction.

Learn more about Direct Current here:

https://brainly.com/question/2625601

#SPJ2

Answer:

maria is right.

Explanation:

Answer:

Earth orbits the Sun

Explanation:

Answer:

Which surface applied the greatest force of friction on the object?

Rougher surfaces have more friction between them. Heavier objects also have more friction because they press together with greater force.

I hope you helped>_<

Answer:

hey want you to separate the energy’s and put them in the categories they go in like why are They different what is chemically different about them? Etc.why do they act differently.. do they act the same in some ways? Think about that

Explanation:

Answer:

B- Gravitational Field

Explanation:

Have a nice day, hope you get a good grade!

The  generator converts mechanical energy to electrical energy by using a conducting metal loop turning in a gravitational field.

In terms of physics, a gravitational field represent the model that should be used for explaining the impact where the massive body should be extended into the space around it. Also, generating the force on the another massive body.

Therefore, based on the above explanation, the correct option is b.

Learn more about energy here: https://brainly.com/question/18167856

Answer:

by taking other atoms that have one shell and putting it i the spot that they need t in

Explanation:

Answer:

M = 4.5

Explanation:

He ran 3 meters, which is three meters. Then he ran back half of 3, which is 1.5 meters. 3 + 1.5 is 4.5

Answer:

Answer:

umm??????? i dont understand

Explanation:

Answer:

0.678m

Explanation:

Find: Δx

Δx = ½ (v + v₀) t

Δx = ½ (4.127 m/s + 2.179 m/s) (0.215 s)

Δx = 0.678 m

Answer:

Explanation:

If you drop a ball from

the top of a building it

gains speed as it falls.

• Every second, its

speed increases by

10 m/s.

• Also it does not fall

equal distances in

equal time intervals

• If the acceleration = 0 then the velocity is

constant. [remember that acceleration is

the rate of change of velocity]

• In this case the distance an object will

travel in a certain amount of time is given

by distance = velocity x time

• For example, if you drive at 60 mph for

one hour you go 60 mph x 1 hr = 60 mi.