HELP PLS PLS
THANK YOU

The density of the spheres is 1.004 gm/cm³.

The maximum velocity attained by an object as it falls through a fluid is known as terminal velocity.

It occurs when the sum of the drag and buoyancy forces acting on the object equals the downward force of gravity. Because the object's net force is zero, it has no acceleration.

The  terminal speed = 2.34 cm/s.

The viscosity of water =  1.00 × 10⁻³ CGS unit.

Terminal velocity: v =  (2/9)(σ − ρ)gr²/η.

σ = 9vη/{2gr²} + ρ

= (9 × 2.34 × 1.00 × 10⁻³)/(2×980×(0.105/2)²) + 1

= 1.004 gm/cm³

Hence, The density of the spheres is 1.004 gm/cm³.

Learn more about terminal velocity here:

https://brainly.com/question/2654450

#SPJ1

The term "spontaneous generation" is erroneous. Only life can give birth to more life. Airborne microbes can be detected.

A scientific experiment is any method that uses measurements and tests to confirm or deny a theory. A hypothesis is a notion that looks to be true but has yet to be confirmed, from which a study might be created. A basic experiment often addresses a "What would happen if...?" cause-and-effect inquiry. For example, you're wondering if misting a plant with water helps it develop faster. You get a sense of how the plant grows without being misted and then compare it to how it grows after being misted.

Here,

The phrase "spontaneous generation" is incorrect. Only life can create more life. Microbes in the air can be detected.

To know more about experiment,

https://brainly.com/question/29865934

#SPJ4

The electric field strength from the origin is  1.95 x 10¹² q ( N/C ).

The electric field of a charged particle is the region of space where the influence of electric force is felt.

Mathematically, the formula for electric field strength is given as;

E = kq / r²

where;

The electric field strength from the origin is calculated as follows;

E = ( 9 x 10⁹ x q ) / ( 0.068 m )²

E = 1.95 x 10¹² q ( N/C )

Learn more about electric field strength here: https://brainly.com/question/14372859

#SPJ1

Following the receipt of these results, researchers will proceed to the control condition.

A condition in an experiment or research design that does not entail exposure to the therapy or intervention being studied. Thus, introducing a control condition helps researchers to compare how things are in the presence of an independent variable to how things would have been if an independent variable had not been present. Participants in an experimental condition are given a treatment or experience, but those in a control condition are not. The major method by which researchers achieve this level of control over extraneous factors across conditions is known as random assignment, which refers to the use of a random procedure to choose which people are evaluated in which situations.

Here,

After receiving these data, researchers will move on to the control condition.

To know more about control condition,

https://brainly.com/question/30258580

#SPJ4

Since the cart moves along the track at a constant speed, its velocity vector at points a, b, and c will have the same magnitude and direction.

The velocity vector can be represented as an arrow pointing in the direction of motion with the magnitude being the speed of the cart.

The acceleration vector at points a, b, and c will be zero since the cart is moving at a constant speed. The acceleration vector can be represented as a zero vector or a vector of length 0 with no direction.

So, the velocity and acceleration vectors at points a, b, and c can be represented as:

Point a:

Point b:

Point c:

Learn more about velocity here:

https://brainly.com/question/25905661

#SPJ4

Answer: ch2.7 × 10.0m = 2.10 ÷ 1.40 sec

= ch.10.23.

Explanation:

The measured value of gravity 'g' can be found by plugging the given height and time into the formula h = 0.5*g*t^2. Solving for 'g' gives us a measured value of approximately 10.20 m/s^2.

You can calculate the measured value of gravity 'g' using the formula for motion under gravity, which is: h = 0.5*g*t^2. Here 'h' stands for height, 'g' for gravitational acceleration and 't' for time.

Given in the problem is h = 10.0 m, t = 1.40 s. Substituting these values in the formula, we get 10.0 = 0.5*g*(1.40)^2.

Solving for 'g', we find g ~ 10.204 m/s^2. Hence your measured value of 'g' is approximately 10.20 m/s^2.

https://brainly.com/question/20324590

#SPJ2

The speed of the truck just before braking is 23.24 m/s.

The speed of the truck before braking is calculated by applying the third kinematic equation as shown below.

v² = u² - 2as

where;

When the truck stops, the final velocity = 0

0 = u² - 2as

u²  = 2as

u = √2as

u = √ ( 2 x 6 x 45 )

u = 23.24 m/s

Learn more about initial speed here: https://brainly.com/question/24493758

#SPJ1

The power required to do the same amount of work in three times the time is 19000 watts / 3 = 6333.33 watts.

What is power?

Power is a measure of the rate of energy transfer. It is the rate at which work is done or energy is converted from one form to another. Power is typically measured in watts, which is equal to one joule of energy per second. Power is an important concept in physics, as it can be used to calculate the amount of work done, the amount of energy transferred, or the rate of change of some other physical quantity. Power is also closely related to the concepts of force and energy.

Therefore, The power required to do the same amount of work in three times the time is 19000 watts / 3 = 6333.33 watts.

To learn more about power

Here: https://brainly.com/question/30272839

#SPJ1

The following is required to have a successful collision: ii. A collision of the appropriate orientation must occur,  iii. Transfer of energy must occur in a collision such that the molecule has energy equal to or greater than the activation energy, v. Formation of products.

Collision is when two objects come in contact with one another and experience a force as a result. This force can be a direct result of the objects hitting each other, or it can be the result of the objects exerting a force on one another in order to move away. In either case, the objects experience a momentary change in their respective velocities.

To learn more about collision
https://brainly.com/question/29549592
#SPJ4

Cause: According to this law, the skateboard requires an external source of force to move, which the skateboarder indirectly provides.

Effect: On the pavement, the skateboarder reverses forward (that is he applies a force on the road in a direction opposite the direction of intended motion).

What connection exists between a cart's mass and its acceleration after the spring is let go?

The acceleration of the cart is inversely proportional to its mass. As a result, the acceleration of the cart will decrease as its mass increases.

The mass and acceleration are inversely correlated: the acceleration decreases as mass increases.

Newton's second law states that force and acceleration are directly proportional to one another, so if a cart's mass is held constant while the force acting on it increases, the cart will accelerate. When an object moves, it has kinetic energy, which it then expends.

To learn more about acceleration refer to;

brainly.com/question/460763

#SPJ1

The greatest option is C because all of them are correct. The planet's temperature is affected by the sun's energy output, the amount of carbon dioxide in the atmosphere, and its distance from the earth.

The atmosphere of Earth is the layer of gases with high speed, collectively known as air, that envelops the planet and gives it its planetary atmosphere. The Earth's atmosphere keeps life on the planet safe by maintaining the pressure necessary for liquid water to exist on the surface. The distance between any two places in space is equal to the length of the straight line connecting them, which is also the shortest path. This is the usual conception of distance in classical physics, especially in Newtonian mechanics.

Learn more about speed here

https://brainly.com/question/28224010

#SPJ4

The wall reaction at point A in newton is most nearly calculated to be equal to 60 N.

Wall reaction means that when you push on a wall, the wall pushes back on you with force equal in strength to the force you exerted.

Cylinder is in a state of static equilibrium, which means that net force and net torque acting on it are both zero. Force exerted by the wall at point A is equal in magnitude but opposite in direction to force exerted by the cylinder on wall at point A. Since the cylinder is not accelerating, net force acting on it is zero.

Since the force exerted by the wall at point A is equal in magnitude but opposite in direction to the weight of the cylinder, we say that the wall reaction at point A = 1/2 * weight of cylinder = 1/2 * 120 N = 60 N.

To know more about reaction force, refer

https://brainly.com/question/14360695

#SPJ4

The unit vector notation in the given direction is [tex]0.58 \hat x + 0.81 \hat y[/tex].

A physical quantity that has both directions and magnitude is referred to as a vector quantity.

A lowercase letter with a "hat" circumflex, such as "û," is used to denote a vector with a magnitude equal to one. This type of vector is known as a unit vector.

In terms of subtracting a vector, it works the same as adding the vector's opposite.

Given that:

[tex]\vec A = 22 \hat x + (-14)\hat y,\\\vec B = 2.5\hat x + 13\hat y.[/tex]

( two given vectors are written here.)

Therefore: the subtraction of these two vectors will be:

[tex]\vec A - \vec B = (= 22 \hat x + (-14)\hat y) - (2.5\hat x + 13\hat y)\\= 19.5\hat x - 27 \hat y[/tex]

Unit vector in that direction of vectors  is =

[tex]= \frac{19.5\hat x - 27 \hat y}{\sqrt{19.5^2 + (-27)^2} } \\= 0.58 \hat x + 0.81 \hat y[/tex]

Learn more about vector quantity here:

https://brainly.com/question/3482586

#SPJ1

The option that will be true regarding the relative values of the partial pressures of the gases remaining in the vessel after some of the gas mixture has effused is;

A) Pressure He < Pressure Ne < Pressure Ar

Pressure is defined as the force applied perpendicular to an object's surface per unit area across which that force is dispersed. Gauge pressure is the pressure in relation to the surrounding atmosphere. Pressure is expressed using a variety of units. Pressure is the force acting on a unit area of a surface. It works perpendicular to the surface under pressure. Pressure = force multiplied by the area on which it operates. Pressure is defined as the amount of force exerted perpendicular to an object's surface per unit area, and the symbol for it is p. (or P). The pascal is the SI unit of pressure (Pa).

Here,

The option that will be true in terms of the relative partial pressures of the gases remaining in the vessel after some of the gas mixture has been effused is;

A) Pressure He < Pressure Ne < Pressure Ar

To know more about pressure,

https://brainly.com/question/12824418

#SPJ4

Inferential statistics is used to determine whether a process that fills bottles with soda is working properly by weighing a sample of bottles, so the given statement is true.

To learn more about Inferential statistics refer to :

https://brainly.com/question/18499755

#SPJ4

The two types of simple machine make up this compound machine are  the screw and the lever.

A screw is a simple machine that consists of a spiral groove or ridge, called a thread, wrapped around a cylinder or cone. When the screw is rotated, it can be used to hold two objects together or to lift an object by turning it into a threaded hole.

Therefore, A lever is a simple machine that consists of a rigid bar that pivots on a fixed point, called a fulcrum. A force applied to one end of the lever can be used to lift or move an object at the other end. Lever can be classified into three classes depending on the position of the load, effort and fulcrum.

Learn more about simple machine from

https://brainly.com/question/30111143

#SPJ1

The resistance between two points on the same finger is likely due to the resistance of the skin and the small amount of muscle and fat that is present in the finger.

The resistance between two points on opposite hands is likely due to the resistance of the skin and the larger amount of muscle and fat that is present in the hand. The resistance decreases when more skin is brought into contact with the probes of the ohmmeter because more skin in contact means more surface area for the current to flow through, thus reducing the resistance. The dramatic drop in resistance when the skin is wet is likely due to the fact that water is a better conductor than dry skin. This observation suggests that the resistance of the human body is largely due to the resistance of the skin, and that the internal resistance of the body (i.e., the resistance of muscles, bones, etc.) is relatively low in comparison.

To know more about conductor, visit:

https://brainly.com/question/18084972

#SPJ4

Answer:

True.

Explanation:

A synthesis reaction is a type of chemical reaction in which two or more substances combine to form a new compound. Methane (CH4) and oxygen (O2) can combine in a synthesis reaction to form carbon dioxide (CO2) and water (H2O). This reaction is exothermic and is the basis of combustion reactions.

The balanced equation for this reaction is:

CH4 + 2O2 -> CO2 + 2H2O

In this reaction, one methane molecule and two oxygen molecules combine to form one carbon dioxide molecule and two water molecules.

It's worth mentioning that methane is considered a greenhouse gas, and the combustion of methane releases carbon dioxide and water vapor into the air, which contribute to global warming and climate change.

"Suppose you use the southern cross to determine that the south celestial pole appears 40 degrees above your horizon. Then you must be located at latitude 40 degrees south." The correct option is 4th.

The local sky's star heights are unaffected by longitude.

The celestial equator and celestial horizon would coincide. Now picture yourself on the Earth's equator, at 0° latitude. Here the celestial equator would pass through your zenith and the north celestial pole (NCP) would lie at the North Point of the horizon and have an altitude of 0°.

Degrees north (+) or south (-) of the celestial equator are used to measure declination. The Earth's Equator is projected onto the Celestial Sphere to create the Celestial Equator. By definition, the CE has a declination of 0 degrees.

To know more about latitudes:

https://brainly.com/question/21098820

#SPJ4

The resistance of working potential difference of the 6.2 V, 4.5 W lamp is 8.54 ohm. When terminal pd across the battery is 6.2 V, the emf of the battery is 8.01 V.

The opposition that a substance provides to the flow of electric current is referred to as resistance. The uppercase letter R represents it. The ohm is the standard unit of resistance, which is sometimes written as a word and sometimes represented by the uppercase Greek letter omega. Resistance is a measure of an electrical circuit's resistance to current flow. Resistance is measured in ohms, which is represented by the Greek letter omega ().

Here,

r=2.5 ohm

V= 6.2 volts

P=4.5 watt

P=V²/R

R=V²/P

R=6.2*6.2/4.5

R=8.54 ohm that is about 9 ohm.

I=V/R

I=0.726 A

EMF=V+Ir

=6.2+0.726*2.5

=6.20+1.81

=8.01 volts

The resistance of the 6.2 V, 4.5 W lamp at its working potential difference is 8.54 ohm. The emf of the battery when terminal pd across the battery is 6.2 V is 8.01 V.

To know more about resistance,

brainly.com/question/13258713

#SPJ1

(a) Work function of the metal is 2.74 eV. (b)  maximum speed of the ejected electrons is 1.15 x 10^6 m/s (1.15 million m/s)

The work function is the minimum energy required to remove an electron from the surface of a metal.

AS, Work function (Φ) = hν - eV0

(V0) is stopping potential  and  (ν) is the frequency of the incident light

Given, wavelength of the incident light is 437 nm,

ν = c / λ = 3.00 x 108 m/s / 437 x 10-9 m = 6.87 x 1014 Hz

Hence, Φ = hν - eV0 = 6.626 x 10-34 J ∙ s * 6.87 x 1014 Hz - 1.60 x 10-19 C * 1.67 V = 4.36 x 10-19 J = 2.74 eV

So the work function of the metal is 2.74 eV.

(b) Maximum speed of the ejected electrons can be calculated using the formula: Vmax = √(2eV0/mel)

Vmax is the maximum speed of the ejected electrons, e is charge of an electron, V0 is stopping potential and mel is mass of the electron.

Vmax = √(2 * -1.60 x 10^-19 C * 1.67 V / 9.11 x 10^-31 kg) = 1.15 x 10^6 m/s

So, the maximum speed of the ejected electrons is 1.15 x 10^6 m/s (1.15 million m/s)

To know more about work function, refer

https://brainly.com/question/19427469

#SPJ4

In order to collect data to find an object's gravitational and inertial mass, meterstick and timer are two essential measuring devices that are needed.

Using the angular frequency value (w), inertial mass (m) is determined using the equation below:

w=√k/m

The equation above is solved for mass (m).

m=k/w²

To calculate the gravitational mass, following equation is used:

force gravity =  G  ×  M  ×  m / radius²

Where: mass, m, is 1 kilogram; mass of the Earth, M, is 6.0 × 1024 kilogram; the radius of the Earth (separation of masses), r, is 6.4 × 106 m; and G is 6.67 × 10⁻¹¹ newton square metrekilogram-2}.

To know more on gravitational and inertial mass visit :

https://brainly.com/question/13163709

#SPJ4

The distance at which object falls is 150m.

Given,

The velocity of the object as a function of time is : [tex]v_{y} = (-3\frac{m}{s^{2} } )t[/tex]

We know that [tex]a = dv/dt[/tex] and [tex]a = v. dv/ds[/tex]

Using these two equations we get: [tex]ds = v .dt[/tex]

Where,

v = velocity function

a = acceleration

s = distance

t = time

To find distance we need to integrate i.e.

[tex]s= \int\limits^a_0 {-3t} \, dt[/tex]

Here a = upper limit = 10 sec (t)

So, [tex]s = \frac{-3t^{2} }{2}[/tex]

Putting t=10, we get s = 150m

So, the distance is 150 m.

To know more about kinematics visit:

https://brainly.com/question/29732228

#SPJ4

Midway between A and B is the position in its motion when is the object's potential energy at a maximum.

A body's mass is an inherent quality. Before the understanding of the atom and particle physics, it was widely considered to be tied to the amount of matter present in a physical body. A body's mass doesn't quite alter at any point in time.

Simply put, a mass-Earth-spring system is a spring device with a block hanging or fastened to the open end of the spring. The duration of any item moving in a simple harmonic motion may typically be determined using this system.

To learn more about potential energy  here

brainly.com/question/24284560

#SPJ4

A charged particle will not follow a field line if it is subjected to an external force that is greater than the force of the electric field.

Electric field is an area of influence created by an electric charge. It is a vector field that surrounds a charged particle or object and exerts a force on other charged particles or objects in its vicinity. Electric fields are created by the movement of electrons and protons, which are both components of atoms. The strength of an electric field is determined by the amount of charge present, as well as the distance from the source.

For example, if a charged particle is subjected to a strong magnetic field, it will experience a Lorentz force which can cause the particle to deviate from its original trajectory and follow a curved path instead of following the field line.

To learn more about electric field
https://brainly.com/question/30144963
#SPJ4

4.33×103 N/C, 35.0∘ below the positive x-axis if qa=+2.50 nC, qb=−8.00 nC, and qc=+1.50 nC are the charges on all the three vertexes of an equilateral Triangle.

As we know the electric field at a point due to a charged particle is E = F/q where f is the force and q is the charge. If the orientation of charges is the same as shown in the image attached then

E = KQq/[tex]r^{2}[/tex]q  where k = 8.99 × 10 9 N ⋅ m 2 /C 2.

where Q is charged  particle and q is another charge so

E = 8.99 × 10 9*2.50*8.00 /3/4r*2.5

which results in

4.33*10^3 N/C

that is the net electric field at the center of the Triangle with charges on all the vertexes.

Learn More about Electric Field: https://brainly.com/question/14372859

#SPJ4

The final momentum of the t-shirt can be evaluated by multiplying the mass of the t-shirt (from part a) by its final velocity (from part b). Final momentum = (1.0 kg) x (20.0 m/s) = 20 kg m/s.

Final momentum is the momentum of an object after it has been acted upon by an external force. It is calculated by taking the initial momentum of an object and adding or subtracting the force of the external force to determine the final momentum. The final momentum is equal to the initial momentum plus the change in momentum caused by the external force. Final momentum can be calculated using the equation pfinal = pinitial + FΔt, where pfinal is the final momentum, pinitial is the initial momentum, F is the force of the external force, and Δt is the change in time caused by the force.

To learn more about final momentum
https://brainly.com/question/26485142
#SPJ4

Factoring in everything we currently know about the history of the universe, our best estimate for the age of the universe is 13.8 billion years old. additionally, some scientists speculate that our universe is not the only universe that exists, but the only one we can gather evidence about. this idea is called Multiverse Theory .

The multiverse theory is the idea that there may be multiple universes existing in parallel to our own, with their own laws of physics, laws of nature, and potentially different versions of ourselves. The multiverse theory has been proposed by many scientists.

To learn more about Universe

brainly.com/question/9724831

#SPJ4

According to the acronym TARGET, affiliation is not a strategy to support a mastery oriented environment.

Creating a mastery oriented environment is where students are actively engaged in the learning process, setting and achieving meaningful goals, and feeling a sense of accomplishment. TARGET is a useful acronym for that goal.

TARGET stands for:

Trust: Building trust between teacher and students is essential so that it increases the likelihood for taking risks and giving feedback.

Authenticity: Teachers must be authentic in their interactions with students. This means being genuinely interested and honest in teaching and assessment.

Respect: It is important to create an atmosphere of respect in the classroom. Respect should be shown to all students.

Growth Mindset: A growth mindset is essential and it means emphasizing effort and progress over ability and success.

Expectations: Teachers should set clear expectations for students, but be flexible in how these expectations are met.

Affiliation is not a measure for fostering a mastery-oriented environment.

It refers to the quality of being intimately connected to or allied with a certain individual, organization, party, business, etc.

Learn more about mastery oriented environment here:

https://brainly.com/question/30010700

#SPJ4

The Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) and for soccer at maximum height E(high) = KE(high) + PE(max).

For a pendulum, at the lowest point, all the potential energy is converted into kinetic energy and the pendulum motion reaches its maximum velocity. Ignored air resistance. Therefore, no heat energy is generated. This means that all potential energy is converted into kinetic energy. Taking drag into account, the final energy is the sum of thermal energy and kinetic energy, so the sum of the two equals the potential energy of the tip.

E(total low) = PE(low) + KE(low) + ThE(low)

PE(low) = 0

so, E(total low) = KE(Low) + ThE(low) = PE(high)

For a soccer ball, the ball has a horizontal velocity component at its highest point and reaches a certain height. The top speed is slower than the initial speed. The total energy at the tip is therefore equal to the sum of the kinetic and potential energies. As in the previous case, the thermal energy is missing because we ignored the resistor.

E(high) = KE(high) + PE(max)

Therefore, the Energy equation for the pendulum at the lowest position will be  E(total low) = KE(Low) + ThE(low) = PE(high) and for soccer at maximum height E(high) = KE(high) + PE(max).

To learn more about total energy:

https://brainly.com/question/15576394

#SPJ4

The complete question is:

follow the example below (the figure attached) to write an equation and sketch a graphical model of energy in each situation. Write down the expanded total energy equation in the case of the pendulum at tje low position and for the soccer ball at its maximum height. Also, make the pie chart diagram of different forms of energy (PE, KE, and ThE).