help please i have 5 minutes to do this !!!

Answer:

BF3

Explanation:

Hybridization can be defined as the mixing of two or more atomic pure orbitals. ( s, p ,  and d) to produce two or more hybrid atomic orbitals that are similar and identical in shape and energy e.g sp,sp²,sp³ ,sp³d, sp³d². Usually , the central atom of a covalent molecules or ion undergoes hybridization.

in BF3; Boron is the central atom. Here, A 2s  electron is excited from the ground state of boron ( 1s²2s²2p¹) to one empty orbitals of 2p.

The 2s orbital is then mixed with two orbitals of 2p to form three sp² hybrid orbitals tat are trigonally arranged in the plane in order to minimize repulsion . Each of the three hybrid orbitals overlaps with p-orbital of fluorine atom to form three bonds of equal strength and with bond angles of 120⁰.

                                  Energy                                                                  

B     ⇵  ║   ⇅  ║    ↑     ----------->    *B    ⇵ ║     ↑  ║     ↑  ║   ↑

       1s      2s         2p                              1s       2s           2p  

    Ground state                                        Excited State

The above shows an illustrative example of how electrons  move from the ground state to the excited state.

Answer:

[tex]t=2.08s[/tex]

Explanation:

Hello,

In this case, for first order reactions, we can use the following integrated rate law:

[tex]ln(\frac{[A]}{[A]_0} )=kt[/tex]

Thus, we compute the time as shown below:

[tex]t=-\frac{ln(\frac{[A]}{[A]_0} )}{k}=- \frac{ln(\frac{0.220M}{0.690M} )}{0.55s^{-1}} \\\\t=-\frac{-1.14}{0.550s^{-1}}\\ \\t=2.08s[/tex]

Best regards.

Answer:

i think option a is correct answer because when there is low temperature then the kinetic enegry will be very less and the atoms moves very slowly.

Answer:

A. very, very slowly

Explanation:

A is the answer because atoms will move faster in hot gas than in cold gas.

The question is incomplete, the solute was not given.

Let the solute be K₂CrO₄ and the solvent be water

Complete Question should be like this:

The density of a 0.438 M solution of potassium chromate (K₂CrO₄) at 298 K is 1.063 g/mL.

Calculate the vapor pressure of water above the solution. The vapor pressure of pure water at this temperature is 0.0313 atm. Assume complete dissociation.  

Pvap = ________atm

Answer:

Pvap (of water above the solution) = 0.0306 atm

Dissolution of the solute

K₂CrO₄ => 2K⁺ + Cr₂O₄²⁻

Explanation:

Given

volume of solution = 1 Litre = 1000 mL of the solution

density of the solution = 1.063 g/mL

concentration of the solution= 0.438M

temperature of the solution= 298 K

vapour pressure of pure water = 0.0313atm

Recall: density = mass/volume

∴mass of solution = volume x density

m = 1000 x 1.063 = 1063 g

To calculate the moles of K₂CrO₄ = volume x concentration

= 1 x 0.438 = 0.438 mol

Mass of K₂CrO₄ = moles x molar mass = 0.438 x 194.19 = 85.055 g

Mass of water = mass  of solution - mass of K₂CrO₄

= 1063 - 85.055 = 977.945 g

moles of water = mass/molar mass

∴ moles of water = 977.945/18.02 = 54.27 mol

 Dissolution of the solute

K₂CrO₄ => 2K⁺ + Cr₂O₄²⁻

(dissolution is the process by which solute(K₂CrO₄) is passed into solvent(H₂O) to form a solution

moles of ions = 3 x moles of K₂CrO₄

= 3 x 0.438 = 1.314 mol

Vapor pressure of solution = mole fraction of water x vapor pressure of water  

= 54.27/(54.27 + 1.314) x 0.0313 = 0.0306 atm

Answer:

Gaseous

Explanation:

Gasses can move freely and do not form the shape of their containers

Liquids are more free than solids, but they conform to the shape of their container

Solids are not free

Answer:

0.0031 moles

Explanation:[tex]Molarity=\frac{molSolute}{LitreSolution}\\ 0.0125M=\frac{molRNA}{0.25L} \\molRNA=0.0125*0.25=0.0031 mol[/tex]

Answer:

The gas evolved because of reaction of acid with metal carbonate or metal hydrogen carbonate turns lime water milky. This shows that the gas is carbon dioxide gas. This happens because of formation of white precipitate of calcium carbonate.

Hope it helps you!

The milky substance formed is CO₂ gas.

The gas evolved because of reaction of acid with metal carbonate or metal hydrogen carbonate turns lime water milky. This shows that the gas is carbon dioxide gas.

This happens because of formation of white precipitate of calcium carbonate.

Lime water turns milky when the gas liberated from an acidified carbonate solution is passed into it.

The liberated CO₂ reacts with lime water to give calcium bicarbonate as the precipitate.

Hence, the milky substance formed is CO₂ gas.

Learn more about white precipitate, here:

https://brainly.com/question/3518266

#SPJ2

Answer:

41.3kJ of heat is absorbed

Explanation:

Based in the reaction:

Fe₃O₄(s) + 4H₂(g) → 3Fe(s) + 4H₂O(g) ΔH = 151kJ

1 mole of Fe3O4 reacts with 4 moles of H₂, 151kJ are absorbed.

63.4g of Fe₃O₄ (Molar mass: 231.533g/mol) are:

63.4g Fe₃O₄ × (1mol / 231.533g) = 0.274moles of Fe₃O₄

These are the moles of Fe₃O₄ that react. As 1 mole of Fe₃O₄ in reaction absorb 151kJ, 0.274moles absorb:

0.274moles of Fe₃O₄ × (151kJ / 1 mole Fe₃O₄) =

Answer:

1.41 M

Explanation:

First we must use the information provided to determine the concentration of the aluminum hydroxide.

Mass of aluminum hydroxide= 320mg = 0.32 g

Molar mass of aluminum hydroxide= 78 g/mol

Volume of the solution= 5.00 ml

From;

m/M= CV

Where;

m= mass of aluminum hydroxide= 0.32 g

M= molar mass of aluminum hydroxide = 78 g/mol

C= concentration of aluminum hydroxide solution = the unknown

V= volume of aluminum hydroxide solution = 5.0 ml

0.32 g/78 g/mol = C × 5/1000

C = 4.1×10^-3/5×10^-3

C= 0.82 M

Reaction equation;

Al(OH)3(aq) + 3HCl(aq) -----> AlCl3(aq) + 3H2O(l)

Concentration of base CB= 0.82 M

Volume of base VB= 1.60 ml

Concentration of acid CA= the unknown

Volume of acid VA= 2.80 ml

Number of moles of acid NA = 3

Number of moles of base NB= 1

Using;

CA VA/CB VB = NA/NB

CAVANB = CBVBNA

CA= CB VB NA/VA NB

CA= 0.82 × 1.60 × 3/ 2.80 ×1

CA= 1.41 M

Therefore the concentration of HCl is 1.41 M

Answer:

using ideal gas equation =12.4576atm to 4.significant figure

using vander Waals equation = 12.3504

The differences is 0.10atm

Answer:

[tex]P_2=1.1x10^6Pa[/tex]

Explanation:

Hello.

In this case, we can solve this problem by applying the Boyle's law which allows us to understand the pressure-volume behavior as a directly proportional relationship:

[tex]P_1V_1=P_2V_2[/tex]

In such away, knowing the both the initial pressure and volume and the final volume, we can compute the final pressure as shown below:

[tex]P_2=\frac{P_1V_1}{V_2}[/tex]

Consider that the given initial pressure is also equal to Pa:

[tex]P_2=\frac{1.00x10^5Pa*11.00m^3}{1.00m^3}\\ \\P_2=1.1x10^6Pa[/tex]

Which stands for a pressure increase when volume decreases.

Regards.

Answer:

Ecell = +0.25V

Explanation:

the half-cell reactions for a voltanic cell

cathode(reduction): 2H⁺(aq) + 2e⁻ ------- H₂(g)

anode(oxidation): 2AgCl(s) ------- 2Ag⁺(aq) + 2Cl⁻ + 2e⁻

we have the standard cell potential E⁺cell = 0.18V at 80C respectively

Q = [H⁺]/[Cl⁻]

sub for [H+] = 0.10M and [Cl-] = 1.5M

Q= 0.1M/1.5M

Q = 0.067

Ecell = E⁺cell - [tex]\frac{0.059}{n}[/tex] logQ

= 0.18 - [tex]\frac{0.056}{1}[/tex] log 0.067

0.18- 0.059(-1.174)

Ecell = +0.25V

Answer:

The correct answer is 8.4 %

Explanation:

The mass percent of a compound in a solution is calculated as follows:

mass percent = mass of solute/mass of solution x 100

The solute is vitamin C, so its mass is:

mass of solute = 5.20 g

The solvent is water, and its mass is 55.0 g. The mass of the solution is given by the sum of solute + solvent:

mass of solution= 5.20 g + 55.0 g = 60.2 g

Finally we calculate the mass percent:

mass percent = 5.20 g/60.2 g x 100 = 8.64%

Answer:

296.1g of Ag is the maximum amount of silver

Explanation:

A solution of 6.3% Ag by mass contains 6.3g of Ag per 100g of solution. Thus, you need to calculate the mass of the solution and then, the mass of Ag present in solution, thus:

Mass of solution:

Assuming a density of 1g/mL:

[tex]4.7L \frac{1000mL}{1L} \frac{1g}{mL} = 4700g[/tex]

If the solution contains 6.3g of Ag per 100g of solution, the mass of Ag in 4700L is:

4700L × (6.3g Ag / 100g) =

Answer:

First, write a balanced equation of the reaction.

A hydrocarbon reacting with oxygen usually gives out carbon dioxide and water (combustion)

2C2H6 + 7O2 ---> 4CO2 + 6H2O

From the equation, we can see the mole ratio of ethane : oxygen is 2:7, meaning 2 moles of ethane reacts with 7 moles of oxygen.

If there's 1 mole of ethane gas, we need y moles of oxygen gas for complete reaction.

[tex]\frac{2}{7} =\frac{1}{y}[/tex]

y= 3.5 moles

Since 5 moles of oxygen is more than the required 3.5 moles, we can deduce oxygen gas is in excess, meaning ethane is limiting.

(You can get the same results too if you take y as ethane gas required).

The no. of moles of product produced ALWAYS depend on the no. of moles of the limiting reactant, since they are the ones which reacts completely.

So, from the equation, since the mole ratio of ethane : water = 2:6,

hence, (take the no. of moles of water produced as z),

[tex]\frac{2}{6} =\frac{1}{z} \\z= 3[/tex]

Therefore, 3 moles of water is produced.

Ethane is the limiting reagent in the given reaction. The number of moles of water produced from the reaction is 3 moles.

A limiting reagent can be defined as that reactant in the chemical reaction which is consumed first among the other reactants during the completion of a chemical reaction.

The limiting reagent is the reactant which decides the yield of the product when the quantity of the reactants is not taken in stoichiometry.

Given, chemical reaction of ethane and oxygen is:

[tex]C_2H_6 + \frac{7}{2} O_2 \longrightarrow 2CO_2 +3H_2O[/tex]

Given, the number of moles of ethane = 1 mol

The number of moles of oxygen = 5 mol

One more of ethane reacts with moles of oxygen = 3.5 mol

Therefore, ethane is the limiting reagent in this reaction as the oxygen is given in excess.

From the balanced equation, one mole of ethane produces moles of water equal to 3 moles.

Learn more about limiting reagent, here:

brainly.com/question/11848702

#SPJ2

Answer:

Answer:

It depends on the weather.

Explanation:

Like rain and hail, snow comes from the water vapor that forms the clouds, but obviously its formation is different: snow forms when the temperature is low in the atmosphere. In these conditions the water vapor drops freeze and when they collide form tiny crystals that join together to form snowflakes, which fall to Earth when they are heavy enough.

Answer:

1- there are 16 hydrogen atoms. ( heptane  C7H16)

2- The compound is octane (C8H18)

explanation

to determine any atom in an alkane, this formula is used Cn H 2n +2, where n is the number of carbon atoms in the molecule.

to find the compound in Q2 we'll apply the numbers:

C nH₂n+2

Answer:

[tex]m_{Fe}=23.0gFe[/tex]

Explanation:

Hello,

In this case, the undergoing chemical reaction is:

[tex]FeO+Mg\rightarrow Fe+MgO[/tex]

Thus, for the given masses of reactants we should compute the limiting reactant for which we first compute the available moles of iron (II) oxide:

[tex]n_{FeO}=40.0gFeO*\frac{1molFeO}{72gFeO} =0.556molFeO[/tex]

Next, we compute the consumed moles of iron (II) oxide by the 10.0 g of magnesium, considering their 1:1 molar ratio in the chemical reaction:

[tex]n_{FeO}^{consumed}=10.0Mg*\frac{1molMg}{24.3gMg}*\frac{1molFeO}{1molMg}=0.412molFeO[/tex]

Therefore, we can notice there is less consumed iron (II) oxide than available for which it is in excess whereas magnesium is the limiting reactant. In such a way, the produced mass of iron turns out:

[tex]m_{Fe}=0.412molFeO*\frac{1molFe}{1molFeO}*\frac{56gFe}{1molFe}\\ \\m_{Fe}=23.0gFe[/tex]

Regards.

Answer:

Due to an electron-pair acceptor and donor.

Explanations:

Lewis acid can be defined as an electron-pair acceptor. An example is Hydrogen ion(H+). This is because it is a proton and it distributes positive charge which means that it accepts electrons(negative charge).

Lewis base can be defined as an electron-pair donor. This is because it donates electrons to be accepted by the proton. An example is ammonia(NH3).

Answer:

Oxidation by FAD  

Explanation:

1. Oxidation by NAD⁺

Succinate ⇌ Fumarate + 2H⁺ + 2e⁻;                  E°´ =  -0.031 V  

NAD⁺ + 2H⁺ + 2e⁻ ⇌ NADH + H⁺;                      E°´ = -0.320 V

Succinate + NAD⁺ ⇌ Fumarate  + NADH + H⁺; E°' =  -0.351 V

2. Oxidation by FAD

Succinate ⇌ Fumarate + 2H⁺ + 2e⁻;        E°´ = -0.031 V  

FAD + 2H⁺ + 2e⁻ ⇌ FADH₂;                    E°´  = -0.219 V

Succinate + FADH₂ ⇌ Fumarate + FAD; E°' = -0.250 V

Neither reaction is energetically favourable, but FAD has a more positive half-cell potential.

FAD is the stronger oxidizing agent.

The oxidation by FAD has a more positive cell potential, so it is more favourable energetically.  

Answer:

Manganese (II) ion, Mn²⁺

Explanation:

Hello,

In this case, given the overall reaction:

[tex]2Ce^{4+}(aq) + Tl^+(aq) + Mn^{2+}(aq) \rightarrow 2Ce^{3+}(aq) + Tl^{3+}(aq) + Mn^{2+}(aq)[/tex]

Thus, since manganese (II) ion, Mn²⁺ is both at the reactant and products, we infer it is catalyst, since catalysts are firstly consumed but finally regenerated once the reaction has gone to completion. Moreover, since inner steps are needed to obtain it, we can infer that the given rate law corresponds to the slowest step that is related with the initial collisions between Ce⁴⁺ and Mn²⁺

Best regards.

Answer:

[tex]49.45~%[/tex]

Explanation:

In this case, we have to start with the chemical reaction:

[tex]C_6H_1_2O~->~C_6H_1_0~+~H_2O[/tex]

So, if we start with 10 mol of cyclohexanol ([tex]C_6H_1_2O[/tex]) we will obtain 10 mol of cyclohexanol ([tex]C_6H_1_0[/tex]). So, we can calculate the grams of cyclohexanol if we calculate the molar mass:

[tex](6*12)+(10*1)=82~g/mol[/tex]

With this value we can calculate the grams:

[tex]10~mol~C_6H_1_0\frac{82~g~C_6H_1_0}{1~mol~C_6H_1_0}=820~g~C_6H_1_0[/tex]

Now, we have as a product 500 mL of [tex]C_6H_1_0[/tex]. If we use the density value (0.811 g/mL). We can calculate the grams of product:

[tex]500~mL\frac{0.811~g}{1~mL}=405.5~g[/tex]

Finally, with these values we can calculate the yield:

[tex]%~=~\frac{405.5}{820}x100~=~49.45%[/tex]%= (405.5/820)*100 = 49.45 %

See figure 1

I hope it helps!

Based on the data given, the percentage yield of the student's work is 49.45 %.

The equation of the clay-catalyzed dehydration of cyclohexanol is given below:

From the equation of the reaction, 1 mole of cyclohexanol yields 1 mole of cyclohexene.

Therefore 10 moles of cyclohexanol should yield 10 moles of cyclohexene.

First we determine the mass of cyclohexene obtained.

Mass = density * volume

volume of cyclohexene = 500 mL

density = 0.811 g/mL

mass of cyclohexene = 500 * 0.811

mass of cyclohexene = 405.5 g

Number of moles of cyclohexene = mass/molar mass

molar mass of cyclohexene = 82 g

moles of cyclohexene = 405.5 g/82

moles of cyclohexene = 4.945 moles

Percentage yield = 4.945/10 * 100%

Percentage yield = 49.45%

Therefore, the percentage yield of the student's work is 49.45 %.

learn more about percentage yield at: https://brainly.com/question/8638404

Answer:

- N2 does not exist as a liquid at pressures below 0.127 atm.

- N2 is a solid at 16.7 atm and 56.5 K.

- N2 is a liquid at 1.00 atm and 73.9 K

- N2 is a gas at 0.127 atm and 84.0 K.

Explanation:

Hello,

At first, we organize the information:

- Normal melting point: 63.2 K.

- Normal boiling point: 77.4 K.

- Triple point: 0.127 atm and 63.1 K.

- Critical point: 33.5 atm and 126.0 K.

In such a way:

- N2 does not exist as a liquid at pressures below 0.127 atm: that is because below this point, solid N2 exists only (triple point).

- N2 is a solid at 16.7 atm and 56.5 K: that is because it is above the triple point, below the critical point and below the normal melting point.

- N2 is a liquid at 1.00 atm and 73.9 K: that is because it is above the triple point, below the critical point and below the normal boiling point.

- N2 is a gas at 0.127 atm and 84.0 K: that is because it is above the triple point temperature at the triple point pressure.

Best regards.

Answer:

Explanation:

0,44

Answer:

molarity of the solution = 0.548 mol/L

Note: Additional information about the question is given as follows;

One brand of laundry bleach is an aqueous solution containing 4.00% sodium hypochlorite (NaOCl) by mass

What is the molarity of this solution? (Assume a density of 1.02 g/mL .)

Explanation:

A 4.00 percentage by mass composition of sodium hypochlorite (NaOCl) solution means that 100 g of the solution contains 4.00 g NaOCl.

Thus, a 1000 g of the solution contains 40.0 g NaOCl

Density of solution = 1.02 g/mL

Therefore, the volume occupied by 1000 g solution = mass/density

volume of 1000 g solution = 1000 g/1.02 g/ml = 980.4 mL

Molar mass of NaOCl = 74.5 g/mol

Number of moles = mass/molar mass

Number of moles of NaOCl = 40.0 g/74.5 g/mol

Number of moles of NaOCl  = 0.537 mole

Therefore, molarity = number of moles / volume(L)

volume of solution in litres = 980.4/1000 = 0.9804 L

Molarity = 0.537/0.9804 = 0.548 mol/L

Therefore, molarity of the solution = 0.548 mol/L

The question is incomplete as the options are missing, however, the correct complete question is attached.

Answer:

The correct answer is option A. ( check image)

Explanation:

The most stable contributor to the intermediate arenium ion produced by electrophilic bromination of methoxybenzene in given options is option a due to the fact that this resonating form follows the octet rule is satisfied for all atoms and additional π bond is present in between C-O that makes it more stable, while in other options there are positive charge which means they do not follows octet rule completely.

Thus, the correct answer is option A. ( check image)

Answer:

C7H5F3

Explanation:

The following data were obtained from the question:

Mass of Carbon (C) = 57.53g

Mass of Hydrogen (H) = 3.45g

Mass of Fluorine (F) = 39.01g

The empirical formula of the compound can be obtained as follow:

C = 57.53g

H = 3.45g

F= 39.01g

Divide each by their molar mass

C = 57.53/12 = 4.79

H = 3.45/1 = 3.45

F = 39.01/19 = 2.05

Divide each by the smallest

C = 4.79/2.05 = 2.3

H = 3.45/2.05 = 1.7

F = 2.05/2.05 = 1

Multiply through by 3 to express in whole number

C = 2.3 x 3 = 7

H = 1.7 x 3 = 5

F = 1 x 3 = 3

Therefore, the empirical formula for the compound is C7H5F3

Hey there!

For this we can use the combined gas law:

[tex]\frac{P_{1}V_{1} }{T_{1}} = \frac{P_{2}V_{2} }{T_{2}}[/tex]

We are only working with pressure and temperature so we can remove volume.

[tex]\frac{P_{1} }{T_{1}} = \frac{P_{2} }{T_{2}}[/tex]

P₁ = 2 atm

T₁ = 27 C

P₂ = 2.2 atm

Plug these values in:

[tex]\frac{2atm}{27C} = \frac{2.2atm}{T_{2}}[/tex]

Solve for T₂.

[tex]2atm = \frac{2.2atm}{T_{2}}*27C[/tex]

[tex]2atm * T_{2}={2.2atm}*27C[/tex]

[tex]T_{2}={2.2atm}\div2atm*27C[/tex]

[tex]T_{2}=1.1*27C[/tex]

[tex]T_{2}=29.7C[/tex]

Convert this to kelvin and get 302.85 K, which is closest to B. 330 K.

Hope this helps!