Answer: lower
There are a number of factors that can affect the coefficient of friction, including surface conditions.
Values of the coefficient of sliding friction can be a good reference for specific combinations of materials. The frictional force and normal reaction are directly proportion but an increase or decrease in coefficient of friction will cause an increase or decrease in the resistance of sliding respectively
I attach a 4.1 kg block to a spring that obeys Hooke's law and supply 3.8 J of energy to stretch the spring. I release the block and it oscillates with a period of 0.13 s. What is the amplitude of oscillation
Answer:
The amplitude of the oscillation is 2.82 cm
Explanation:
Given;
mass of attached block, m = 4.1 kg
energy of the stretched spring, E = 3.8 J
period of oscillation, T = 0.13 s
First, determine the spring constant, k;
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
where;
T is the period oscillation
m is mass of the spring
k is the spring constant
[tex]T = 2\pi \sqrt{\frac{m}{k} } \\\\k = \frac{m*4\pi ^2}{T^2} \\\\k = \frac{4.1*4*(3.142^2)}{(0.13^2)} \\\\k = 9580.088 \ N/m\\\\[/tex]
Now, determine the amplitude of oscillation, A;
[tex]E = \frac{1}{2} kA^2[/tex]
where;
E is the energy of the spring
k is the spring constant
A is the amplitude of the oscillation
[tex]E = \frac{1}{2} kA^2\\\\2E = kA^2\\\\A^2 = \frac{2E}{k} \\\\A = \sqrt{\frac{2E}{k} } \\\\A = \sqrt{\frac{2*3.8}{9580.088} }\\\\A = 0.0282 \ m\\\\A = 2.82 \ cm[/tex]
Therefore, the amplitude of the oscillation is 2.82 cm
A vector quantity has direction, a scalar quantity does not.
Explanation:
hope you like then comment plz
Which compound is composed of oppositely charged ions?
Answer:
Option A. Li2O
Explanation:
To know which of the compound contains oppositely charged ions, let us determine the nature of each compound. This is illustrated below:
Li2O is an ionic compound as it contains a metal (Lithium, Li) and non metal (oxygen, O). Ionic compounds are charactized by the presence of aggregate positive and negative charge ions. This is true because they are formed by the transfer of electron(s) from the metallic atom to the non-metallic atom.
2Li —> 2Li^+ + 2e
O2 + 2e —> O^2-
2Li + O2 + 2e —> 2Li^+ + O^2- + 2e
2Li + O2 —> 2Li^+ O^2- —> Li2O
OF2 is a covalent compound as it contains non metals only (i.e oxygen, O and fluorine, F). Covalent compounds are characterised by the presence of molecules. This is true because they are formed from the sharing of electron(s) between the atoms involved.
PH3 is a covalent compound as it contains non metals only (i.e phosphorus, P and hydrogen, H).
SCl2 is a covalent compound as it contains non metals only (i.e sulphur, S and chlorine, Cl).
From the above information, we can see that only Li2O contains oppositely charged ions.
Answer:
A
Explanation:
Just took the test
A rod has length 0.900 mm and mass 0.500 kgkg and is pivoted at one end. The rod is not uniform; the center of mass of the rod is not at its center but is 0.500 mm from the pivot. The period of the rod's motion as a pendulum is 1.49 ss. What is the moment of inertia of the rod around the pivot
Answer:
The moment of inertia is [tex]I =0.14 \ kg \cdot m^2[/tex]
Explanation:
From the question we are told that
The length of the rod is [tex]l = 0.900 \ m[/tex]
The mass of the rod is [tex]m = 0.500 \ kg[/tex]
The distance of the center of mass from the pivot is [tex]d = 0.500 \ m[/tex]
The period of the rod's motion is [tex]T = 1.49 \ s[/tex]
Generally the period of the motion is mathematically represented as
[tex]T = 2 \pi * \sqrt{\frac{I}{m* g * d} }[/tex]
Where [tex]I[/tex] is the moment of inertia about the pivot so making [tex]I[/tex] the subject of formula
[tex]I = [\frac{T}{2\pi } ]^2 * m * g * d[/tex]
substituting values
[tex]I = [\frac{1.49}{2* 3.142 } ]^2 * 0.5 * 9.8 * 0.5[/tex]
[tex]I =0.14 \ kg \cdot m^2[/tex]
If an object is determined to have a negative charge of 1.6 micro Coulomb, you can conclude that the object has an excess of
Answer:
The object has an excess of [tex]10^{13}[/tex] electrons.
Explanation:
When an object has a negative charge he has an excess of electrons in its body. We can calculate the number of excessive electrons by dividing the charge of the body by the charge of one electron. This is done below:
[tex]n = \frac{\text{object charge}}{\text{electron charge}}\\n = \frac{-1.6*10^{-6}}{-1.6*10^{-19}} = 1*10^{-6 + 19} = 10^{13}[/tex]
The object has an excess of [tex]10^{13}[/tex] electrons.
Refer the attached photo
Answer:
A
Explanation:
since the wooden bat is an opaque object placed after a translucent object, light will come through the plastic sheet but will be unable to go through the bat. hence the dark shadow of the bat on a lit sheet
Two cylindrical resistors are made from the same material. The shorter one has length L, diameter D, and resistance R1. The longer one has length 8L, diameter 4D, and resistance R2. How do the resistances of these two resistors compare
Answer:
the resistance of the longer one is twice as big as the resistance of the shorter one.
Explanation:
Given that :
For the shorter cylindrical resistor
Length = L
Diameter = D
Resistance = R1
For the longer cylindrical resistor
Length = 8L
Diameter = 4D
Resistance = R2
So;
We all know that the resistance of a given material can be determined by using the formula :
[tex]R = \dfrac{\rho L }{A}[/tex]
where;
A = πr²
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
For the shorter cylindrical resistor ; we have:
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
since 2 r = D
[tex]R = \dfrac{\rho L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]
[tex]R = \dfrac{ 4 \rho L }{\pi \ D ^2}[/tex]
For the longer cylindrical resistor ; we have:
[tex]R = \dfrac{\rho L }{\pi r ^2}[/tex]
since 2 r = D
[tex]R = \dfrac{ \rho (8 ) L }{\pi (\frac{2}{2 \ r}) ^2}[/tex]
[tex]R = \dfrac{32\rho L }{\pi \ (4 D) ^2}[/tex]
[tex]R = \dfrac{2\rho L }{\pi \ (D) ^2}[/tex]
Sp;we can equate the shorter cylindrical resistor to the longer cylindrical resistor as shown below :
[tex]\dfrac{R_s}{R_L} = \dfrac{ \dfrac{ 4 \rho L }{\pi \ D ^2}}{ \dfrac{2\rho L }{\pi \ (D) ^2}}[/tex]
[tex]\dfrac{R_s}{R_L} ={ \dfrac{ 4 \rho L }{\pi \ D ^2}}* { \dfrac {\pi \ (D) ^2} {2\rho L}}[/tex]
[tex]\dfrac{R_s}{R_L} =2[/tex]
[tex]{R_s}=2{R_L}[/tex]
Thus; the resistance of the longer one is twice as big as the resistance of the shorter one.
In the photoelectric effect, if the intensity of light shone on a metal increases, what will happen?
Answer:
C) There will be more electrons ejected
Explanation:
The number of electrons ejected whenever a photoelectric effect is identified it is proportional to the intensity of the incident light
Nevertheless, the photoelectrons' maximal kinetic energy is independent of their light intensity
Therefore, the maximum speed of the electron ejected doesn't really depend on the light intensity
So, if the intensity rises, only the number of electrons ejected will rised
Therefore the option c is correct
Answer:
C) There will be more electrons ejected
Explanation:
In the photoelectric effect, photons with an energy of E are shone upon a piece of metal, and if the energy of the photons overcome the work function ϕ of the metal, then electrons with will be ejected from the metal with a kinetic energy KE.
E_photon = Φ + KE
Each photon is capable of ejecting one electron from the metal. Therefore, increasing the intensity of the light (the number of photons shone on the metal) will increase the number of electrons ejected from the metal.
A cylindrical shell of radius 7.00 cm and length 2.21 m has its charge uniformly distributed on its curved surface. The magnitude of the electric field at a point 15.2 cm radially outward from its axis (measured from the midpoint of the shell) is 36.0 kN/C. (a) Find the net charge on the shell.
Answer:
The net charge on the shell is 30x10^-9C
Explanation:
Pls see attached file
symbol of science hhshsjsiwtwwisjzhJava
Answer:
is this a company name.? java is a computer software right..
How many excess electrons must be distributed uniformly within the volume of an isolated plastic sphere 20.0 cm in diameter to produce an electric field of 1450 N/C just outside the surface of the sphere
Answer:
1.007 × 10^(10) electron
Explanation:
We are given;
Electric Field;E = 1450 N/C
Diameter;d = 20 cm = 0.2 m
So, Radius: r = 0.2/2 = 0.1 m
Formula for Electric field just outside the sphere is given by the formula;
E = kq/r²
Where;
E is the magnitude of the electric field. q is the magnitude of the point charge r is distance from the point charge
k is a constant with a value of 9 x 10^(9) N.m²/C²
Making q the subject, we have;
q = Er²/k
Thus,
q = 1450 × 0.1²/(9 × 10^(9))
q = 1.61 × 10^(-9) C
Now, total charge q is also given by the formula;
q = Ne
Where;
e is charge on electron which is 1.6 × 10^(-19)
N is number of excess electrons
Making N the formula, we have;
N = q/e
N = (1.61 × 10^(-9))/(1.6 × 10^(-19))
N = 1.007 × 10^(10) electron
Find the ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same.
Answer:
The ratio of the new force over the original force is 16
Explanation:
Recall the formula for the gravitational force between two masses M1 and M2 separated a distance D:
[tex]F_G=G\,\frac{M_1\,\,M_2}{D^2}[/tex]
So now, if the masses M1 and M2 are quadrupled and the distance stays the same, the new force becomes:
[tex]F'_G=G\,\frac{4M_1\,\,4M_2}{D^2}=G\,\frac{16\,\,M_1\,\,M_2}{D^2}=16\,\,G\,\frac{M_1\,\,M_2}{D^2}= 16\,\,F_G[/tex]
which is 16 times the original force.
So the ratio of the new force over the original force is 16
The ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same is 16:1.
What does Newton's law of gravitation state?Newton's law of gravitation states that any particle of matter in the universe attracts any other with a force varying directly as the product of the masses and inversely as the square of the distance between them.
The formula for Newton's law of gravitation is:
[tex]F = G \frac{m_1m_2}{r^{2} }[/tex]
where,
F is the gravitational force.G is the gravitational constant.m₁ and m₂ are the masses of both objects.r is the distance between the objects.The initial force between the planets is:
[tex]F_1 = G \frac{m_1m_2}{r^{2} }[/tex]
The force between the planets if the masses of both planets are quadrupled but the distance between them stays the same is:
[tex]F_2 = G \frac{4m_14m_2}{r^{2} } = 16 G \frac{m_1m_2}{r^{2} }[/tex]
The ratio of F₂ to F₁ is:
[tex]\frac{F_2}{F_1} =\frac{16 G \frac{m_1m_2}{r^{2} }}{G \frac{m_1m_2}{r^{2} }} = \frac{16}{1}[/tex]
The ratio of the gravitational force between two planets if the masses of both planets are quadrupled but the distance between them stays the same is 16:1.
Learn more about Newton's gravitational law here: https://brainly.com/question/9373839
A small ferryboat is 4.70 m wide and 6.10 m long. When a loaded truck pulls onto it, the boat sinks an additional 5.00 cm into the river. What is the weight of the truck
Answer:
M = 1433.5 kg
Explanation:
This exercise is solved using the Archimedean principle, which states that the hydrostatic thrust is equal to the weight of the desalinated liquid,
B = ρ g V
with the weight of the truck it is in equilibrium with the push, we use Newton's equilibrium condition
Σ F = 0
B-W = 0
B = W
body weight
W = M g
the volume is
V = l to h
rho_liquid g (l to h) = M g
M = rho_liquid l a h
we calculate
M = 1000 4.7 6.10 0.05
M = 1433.5 kg
A woman is standing at the rim of a nonuniform cylindrical horizontal platform initially at rest. The platform is free to rotate about frictionless orthogonal axle that goes through its center and has 4 m in diameter and moment of inertia of 500 kgm2. The woman then starts walking along the rim in clockwise direction at a constant speed of 1.50 m/s relative to the Earth. If a woman has 60 kg, how much work does she do to set herself and the platform into motion?
Answer:
e
Explanation:
i took it myself and got it right
Four identical charges particles of charge 1Uc, 2Uc,
3Uc and 4Uc
are placed at x = lm, x=2m,
x=3m and
x=5m. The electric field intensity
at origin is?
Answer:
17.94 kN/C is the electric field intensity at the origin due to the charges.
Explanation:
From the question, we are told that
The distance of 1 μC from origin = 1 m
The distance of 2 μC from origin = 2 m
The distance of 3 μC from origin = 3 m
The distance of 4 μC from origin = 5 m
Therefore, for us to find the electric field intensity, we'll solve below:
The formula for Electric field intensity = ( k * q ) / ( r * r )
where , r is distance ,
k = 9 * 10^9 ,
and , q is charge .
now ,
electric field intensity at the origin = [ k * 10^(-6) / 1 * 1 ] +[ k * 2 * 10^(-6) / 2 * 2 ] + [ k * 3 * 10^(-6) / 3 * 3 ] + [ k * 4 * 10^(-6) / 5 * 5 ]
=> electric field intensity at the origin = k * 10^(-6) [ 1 + 1/2 + 1/3 + 4/25 ] N/C
=> electric field intensity at the origin = 9 * 10^9 * 10^(-6) * 1.99 N/C
=> electric field intensity at the origin = 17.94 kN/C
Which of the following is not considered a behavior?
A. eating
B. anxiety
C. sleeping
D. crying
━━━━━━━☆☆━━━━━━━
▹ Answer
B. Anxiety
▹ Step-by-Step Explanation
Anxiety isn't a behavior since it's a feeling. Behavior and feeling are different things therefore, anxiety is the correct answer.
Hope this helps!
- CloutAnswers ❁
Brainliest is greatly appreciated!
━━━━━━━☆☆━━━━━━━
Eating, sleeping, and crying all are considered as behaviors. However, anxiety cannot be considered as a behavior because it is a feeling. Thus, the correct option is B.
What is Anxiety?Anxiety is an intense feeling of excessive, and persistent worry and the fear about everyday situations. This includes fast heart rate, rapid breathing, sweating, and feeling tired constantly may occur.
Behavior is the range of actions and mannerisms which are made by individuals, organisms, systems or the artificial entities in some environment. These systems can include other systems or organisms as well as the inanimate physical environment. Behaviors include eating, sleeping, and crying. Anxiety is not a behavior, it is a feeling.
Therefore, the correct option is B.
Learn more about Anxiety here:
https://brainly.com/question/28481974
#SPJ5
Angular velocity in the z direction of a flywheel is w(t)=A + Bt2 The numerical values of the constants are A=2.75 and B=1.50. What is the angular acceleration α(t) when t=0s and t=5.00s?
Answer:
α(0) = 0 rad/s²
α(5) = 15 rad/s²
Explanation:
The angular velocity of the flywheel is given as follows:
w(t) = A + B t²
where, A and B are constants.
Now, for the angular acceleration, we must take derivative of angular velocity with respect to time:
Angular Acceleration = α (t) = dw/dt
α(t) = (d/dt)(A + B t²)
α(t) = 2 B t
where,
B = 1.5
AT t = 0 s
α(0) = 2(1.5)(0)
α(0) = 0 rad/s²
AT t = 5 s
α(5) = 2(1.5)(5)
α(5) = 15 rad/s²
You have a circuit of three resistors in series connected to a battery. You add a fourth resistor, also in series, to the combination. As a result:_______.
A. Power delivered from the battery to combination increases.
B. It is impossible to give the answer without knowing the actual resistances and voltage of the battery.
C. Power delivered from the battery to combination is unchanged.
D. Power delivered from the battery to combination decreases.
Answer:
D
Explanation:
The power equation is P= V^2/R
Please let me know if this helped! Please rate it the brainlist if possible!
As a result of the given scenario, power delivered from the battery to combination decreases. The correct option is D.
What is a resistors?A resistor is a two-terminal passive electrical component that uses electrical resistance as a circuit element.
Resistors are used in electronic circuits to reduce current flow, adjust signal levels, divide voltages, and bias active elements.
A resistor is a component of an electronic circuit that limits or regulates the flow of electrical current. Resistors can also be used to supply a fixed voltage to an active device such as a transistor.
The current through resistors is the same when they are connected in series. The battery voltage is divided among resistors.
Adding more resistors to a series circuit increases total resistance and thus lowers current. However, in a parallel circuit, adding more resistors in parallel creates more options while decreasing total resistance.
Thus, the correct option is D.
For more details regarding resistors, visit:
https://brainly.com/question/24297401
#SPJ5
A standard 1 kilogram weight is a cylinder 48.5 mm in height and 49.0 mm in diameter. What is the density of the material? kg/m3
Answer:
Density = 10,933.93 kg/m^3
the density of the material is 10,933.93 kg/m^3
Explanation:
Density is the mass per unit volume
Density = mass/volume = m/V
Volume of a cylinder V = πr^2 h
Given;
Height h = 48.5mm = 0.0485 m
Radius r = diameter/2 = 49mm÷2 = 24.5mm = 0.0245m
Substituting the values;
Volume V = π×(0.0245^2)×0.0485
V = 0.000091458438030 m^3
V = 0.000091458 m^3
The mass is given as;
Mass = 1 kg
So, the density can be calculated as;
Density = 1/0.000091458
Density = 10933.92825785 kg/m^3
Density = 10,933.93 kg/m^3
the density of the material is 10,933.93 kg/m^3
At what temperature will silver have a resistivity that is two times the resistivity of iron at room temperature? (Assume room temperature is 20° C.)
Answer:
The temperature of silver at this given resistivity is 2971.1 ⁰C
Explanation:
The resistivity of silver is calculated as follows;
[tex]R_t = R_o[1 + \alpha(T-T_o)]\\\\[/tex]
where;
Rt is the resistivity of silver at the given temperature
Ro is the resistivity of silver at room temperature
α is the temperature coefficient of resistance
To is the room temperature
T is the temperature at which the resistivity of silver will be two times the resistivity of iron at room temperature
[tex]R_t = R_o[1 + \alpha(T-T_o)]\\\\\R_t = 1.59*10^{-8}[1 + 0.0038(T-20)][/tex]
Resistivity of iron at room temperature = 9.71 x 10⁻⁸ ohm.m
When silver's resistivity becomes 2 times the resistivity of iron, we will have the following equations;
[tex]R_t,_{silver} = 2R_o,_{iron}\\\\1.59*10^{-8}[1 + 0.0038(T-20)] =(2 *9.71*10^{-8})\\\\\ \ (divide \ through \ by \ 1.59*10^{-8})\\\\1 + 0.0038(T-20) = 12.214\\\\1 + 0.0038T - 0.076 = 12.214\\\\0.0038T +0.924 = 12.214\\\\0.0038T = 12.214 - 0.924\\\\0.0038T = 11.29\\\\T = \frac{11.29}{0.0038} \\\\T = 2971.1 \ ^0C[/tex]
Therefore, the temperature of silver at this given resistivity is 2971.1 ⁰C
(5 pt) You tie a cord to a pail of water, and your swing the pail in a vertical circular 0.700 m. What is the minimum speed must you give the pail at the highest point of the circle if no water is to spill from it
Answer:
The minimum speed required is 2.62m/s
Explanation:
The value of gravitational acceleration = g = 9.81 m/s^2
Radius of the vertical circle = R = 0.7 m
Given the mass of the pail of water = m
The speed at the highest point of the circle = V
The centripetal force will be needed must be more than the weight of the pail of water in order to not spill water.
Below is the calculation:
[tex]\frac{mV^{2}}{R} = mg[/tex]
[tex]V = \sqrt{gR}[/tex]
[tex]V = \sqrt{9.81 \times 0.7}[/tex]
[tex]V = 2.62 m/s[/tex]
Determine the maximum height and range of a projectile fired at a height of 6 feet above the ground with an initial velocity of 100 feet per second at an angle of 40 degrees above the horizontal.Maximum heightRange Question 20 options:a) 70.56 feet183.38 feet b) 92.75 feet310.59 feet c) 92.75 feet183.38 feet d) 70.56 feet314.74 feet e)
Answer:
C is the correct answer
Explanation:
Faraday's Law states that the negative of the time rate of change of the flux of the magnetic field through a surface is equal to which of the following quantities?
a. The flux of the magnetic field through a surface which has the loop as its boundary.
b. The negative of the time rate of change of the flux of the magnetic field through a surface which has the loop as its boundary.
c. The line integral of the magnetic field around the closed loop.
d. The flux of the electric field through a surface which has the loop as its boundary.
Answer:
(C). The line integral of the magnetic field around a closed loop
Explanation:
Faraday's law states that induced emf is directly proportional to the time rate of change of magnetic flux.
This can be written mathematically as;
[tex]EMF = -\frac{\delta \phi _B}{\delta t}[/tex]
[tex](\frac{\delta \phi _B}{\delta t} )[/tex] is the rate of change of the magnetic flux through a surface bounded by the loop.
ΔФ = BA
where;
ΔФ is change in flux
B is the magnetic field
A is the area of the loop
Thus, according to Faraday's law of electric generators
∫BdL = [tex]\frac{\delta \phi _B}{\delta t}[/tex] = EMF
Therefore, the line integral of the magnetic field around a closed loop is equal to the negative of the rate of change of the magnetic flux through the area enclosed by the loop.
The correct option is "C"
(C). The line integral of the magnetic field around a closed loop
Faraday's Law states that the negative of the time rate of change of the flux of the magnetic field through a surface is equal to: D. The flux of the electric field through a surface which has the loop as its boundary.
In Physics, the surface integral with respect to the normal component of a magnetic field over a surface is the magnetic flux through that surface and it is typically denoted by the symbol [tex]\phi[/tex].
Faraday's Law states that the negative of the time rate of change ([tex]\Delta t)[/tex] of the flux of the magnetic field ([tex]\phi[/tex]) through a surface is directly proportional to the flux ([tex]\phi[/tex]) of the electric field through a surface which has the loop as its boundary.
Mathematically, Faraday's Law is given by the formula:
[tex]E.m.f = -N\frac{\Delta \phi}{\Delta t}[/tex]
Where:
N is the number of turns.Read more: https://brainly.com/question/15121836
supose at 20 degree celsius the resistance of Tungsten thermometer is 154.9. WHen placed in a particular solution , the resistance is 207.4 What is the temerature (in degree Celsius of this solution
Answer:
T₂ = 95.56°C
Explanation:
The final resistance of a material after being heated is given by the relation:
R' = R(1 + αΔT)
where,
R' = Final Resistance = 207.4 Ω
R = Initial Resistance = 154.9 Ω
α = Temperature Coefficient of Resistance of Tungsten = 0.0045 °C⁻¹
ΔT = Change in Temperature = ?
Therefore,
207.4 Ω = 154.9 Ω[1 + (0.0045°C⁻¹)ΔT]
207.4 Ω/154.9 Ω = 1 + (0.0045°C⁻¹)ΔT
1.34 - 1 = (0.0045°C⁻¹)ΔT
ΔT = 0.34/0.0045°C⁻¹
ΔT = 75.56°C
but,
ΔT = Final Temperature - Initial Temperature
ΔT = T₂ - T₁ = T₂ - 20°C
T₂ - 20°C = 75.56°C
T₂ = 75.56°C + 20°C
T₂ = 95.56°C
Suppose the ring rotates once every 4.30 s . If a rider's mass is 53.0 kg , with how much force does the ring push on her at the top of the ride?
The complete question is;
In an amusement park ride called The Roundup, passengers stand inside a 16-m-diameter rotating ring. After the ring has acquired sufficient speed, it tilts into a vertical plane.
Suppose the ring rotates once every 4.30 s . If a rider's mass is 53.0 kg , with how much force does the ring push on her at the top of the ride?
Answer:
F_top = 385.36 N
Explanation:
We are given;
mass;m = 52 kg
Time;t = 4.3 s
Diameter;d = 16m
So,Radius;r = 16/2 = 8m
The formula for the centrifugal force is given as;
F_c = mω²R
Where;
R = radius
Angular velocity;ω = 2πf
f = frequency = 1/t = 1/4.3 Hz
F_c = 53 × (2π × 1/4.3)² × 8 = 905.29 N.
The force at top would be;
F_top = F_c - mg
F_top = 905.29 - (9.81 × 53) N
F_top = 385.36 N
The force at the top of ride will be "385.36 N".
Force and mass:According to the question,
Rider's mass, m = 52 kg
Time, t = 4.3 s
Diameter, d = 16 m
Radius, r = [tex]\frac{16}{2}[/tex] = 8 m
Frequency, f = [tex]\frac{1}{t}[/tex] = [tex]\frac{1}{4.3}[/tex] Hz
We know the formula,
Centrifugal force, [tex]F_c[/tex] = mω²R
or,
Angular velocity, ω = 2πf
By substituting the values in the above formula,
[tex]F_c = 53(2\pi \times (\frac{1}{4.3})^2\times 8 )[/tex]
[tex]= 905.29[/tex] N
hence,
The top force will be:
→ [tex]F_{top} = F_c[/tex] - mg
By substituting the values,
[tex]= 905.29-(9.81\times 53)[/tex]
[tex]= 385.36[/tex] N
Thus the above response is correct.
Find out more information about force here:
https://brainly.com/question/12970081
If a negative point charge is placed at P without moving the original charges, the net electrical force the charges ±Q will exert on it is
Answer:
The particle P moves directly upwards
Explanation:
Lets designate the negative point charge at point P as particle P
The +Q charge will exert an attractive force on the particle P.
The -Q charge will exert a repulsive force on the particle P
The +Q charge exerts an upwards and leftward force on particle P
The -Q charge exerts an upwards and rightward force on particle P
Since the charges are equidistant from the particle P, and are of equal magnitude, the rightward force and the leftward force will cancel out, leaving just the upward force on the particle P.
The effect of the upward force is that the particle P moves directly upwards
In a high school swim competition, a student takes 1.6 s to complete 1.5 somersaults. Determine the average angular speed of the diver, in rad/s, during this time interval.
Answer:
The angular speed is [tex]w = 5.89 \ rad/s[/tex]
Explanation:
From the question we are told that
The time taken is [tex]t = 1.6 s[/tex]
The number of somersaults is n = 1.5
The total angular displacement during the somersault is mathematically represented as
[tex]\theta = n * 2 * \pi[/tex]
substituting values
[tex]\theta = 1.5 * 2 * 3.142[/tex]
[tex]\theta = 9.426 \ rad[/tex]
The angular speed is mathematically represented as
[tex]w = \frac{\theta }{t}[/tex]
substituting values
[tex]w = \frac{9.426}{1.6}[/tex]
[tex]w = 5.89 \ rad/s[/tex]
A 6.50-m-long iron wire is 1.50 mm in diameter and carries a uniform current density of 4.07 MA/m^2. Find the voltage between the two ends of the wire.
Answer:
V = 0.45 Volts
Explanation:
First we need to find the total current passing through the wire. That can be given by:
Total Current = I = (Current Density)(Surface Area of Wire)
I = (Current Density)(2πrL)
where,
r = radius = 1.5/2 mm = 0.75 mm = 0.75 x 10⁻³ m
L = Length of Wire = 6.5 m
Therefore,
I = (4.07 x 10⁻³ A/m²)[2π(0.75 x 10⁻³ m)(6.5 m)]
I = 1.25 x 10⁻⁴ A
Now, we need to find resistance of wire:
R = ρL/A
where,
ρ = resistivity of iron = 9.71 x 10⁻⁸ Ωm
A = Cross-sectional Area = πr² = π(0.75 x 10⁻³ m)² = 1.77 x 10⁻⁶ m²
Therefore,
R = (9.71 x 10⁻⁸ Ωm)(6.5 m)/(1.77 x 10⁻⁶ m²)
R = 0.36 Ω
From Ohm's Law:
Voltage = V = IR
V = (1.25 x 10⁻⁴ A)(0.36 Ω)
V = 0.45 Volts
The voltage difference between the AA and AAA batteries should be quite small. What then might be the difference between them?
Answer:
The major difference is the capacity of both batteries. The AA battery has a higher capacity (a higher current) than the AAA battery.
Explanation:
The AA batteries and the AAA batteries are very similar in their voltage; both of them have 1.5 V.
The difference between these two batteries is their size and also the current that they have. The AAA battery is smaller than the AA battery, which means that the amount of electrochemical material is lower, so the AA battery has a higher capacity (a higher current) than the AAA battery. Generally, AA battery has 2400 mAh capacity and AAA battery has a capacity of 1000mAh; this means that AA battery has almost three times the capacity of an AAA battery.
Furthermore, the size of the AA battery makes it more common than the AAA battery and therefore has higher commercial demand.
I hope it helps you!
A small cylinder made of a diamagnetic material is brought near a bar magnet. One end of the cylinder is brought near the North pole of the magnet and is repelled. What happens when the other end of the cylinder is brought near the North pole of the magnet? Group of answer choices
Answer:
it attracts
Explanation:
since in a magnetic body there are two poles
(north and south poles)if the first pole was repeled when brought near the North Pole therefore the other end is going to attarct because the first end was also a North Pole while the second end will be a south pole