Answer:
H2O
=(1×2)+(8)
=20
Explanation:
We have 1 Hydrogen(H) and 8 Oxygen(O)neutrons . Following the molecule formula, H2O, which means we have 2 Hydrogen that needs to times with 1 neutron;and we have only 1 Oxygen which has 8 neutrons. So 2 (H) have to times 1 and 1(O) have to times 8.
What is the elevation of point x on rock mountain ( Ik it's blury but please help for 30 points ) ty
Explanation:
A contour map shows two locations, X and Y, 5 kilometers apart. The elevation at location X is 800 meters and the elevation at location Y is 600 meters.
How many grams of KI would you need to prepare 0.50 g of 7.0% KI (m/m) solution?
Answer:
fomula; ( x = mutiplacation btw)
% m/m = m(solute) / m(solution) x 100%
0.50g x 70% = m/m x 100%
0.5g x 70% / 100% = 3.5 g KI
(both % cancle each other)
Explanation:
heads up might be wrong i did it myself
beta-plus decay sodium protons and neutrons
Answer:
(β-decay) is a type of radioactive decay in which a beta particle (fast energetic electron or positron) is emitted from an atomic nucleus, transforming the original nuclide to an isobar of that nuclide. For example, beta decay of a neutron transforms it into a proton by the emission of an electron accompanied by an antineutrino; or, conversely a proton is converted into a neutron by the emission of a positron with a neutrino in so-called positron emission.
Explanation:
Answer:
Beta decay occurs when, in a nucleus with too many protons or too many neutrons, one of the protons or neutrons is transformed into the other. ... In beta plus decay, a proton decays into a neutron, a positron, and a neutrino: p Æ n + e+ +n.
Explanation:
A 50,000 g septic tank reading reports that methane gas bubbles are present with a concentration of 17 ppm
Answer:
[tex]m_{solute}=0.85g[/tex]
Explanation:
Hello there!
In this case, according to the given information for the parts per million of methane in this solution, it is possible for us to first write the equation for this unit of concentration as shown below:
[tex]ppm=\frac{m_{solute}}{m_{solvent}} *1x10^6[/tex]
In such a way, since the septic tank has a mass of 50,000 g, the mass of methane into it is calculated as shown below:
[tex]m_{solute}=\frac{ppm*m_{solvent}}{1x10^6}[/tex]
Now, we plug in the numbers to obtain:
[tex]m_{solute}=\frac{17*50000g}{1x10^6}\\\\m_{solute}=0.85g[/tex]
Regards!
I need help everyone
Answer:
The answer is D
The last one
In the lab jill mixed 3 gases together. The resulting pressure was 930 mmHg carbon dioxide had a partial pressure of .70 atm and oxygen had a partial pressure of 680 mmHg. What is the partial pressure of nitrogen in kPa
Answer:
26.2kPa is the partial pressure of nitrogen
Explanation:
Assuming the partial pressure of Carbon dioxide is 0.070atm
The total pressure of a mixture of 3 gases (CO2, O2 and N2) is:
Total pressure = Partial pressure CO2 + Partial pressure O2 + Partial pressure N2
0.070atm CO2 are:
0.070atm * (760mmHg / 1atm) 53.2mmHg
Replacing:
930mmHg = 53.2mmHg + 680mmHg + Partial pressure N2
Partial Pressure N2 = 196.8mmHg
In kPa -101.325kPa = 760mmHg-
196.8mmHg * (101.325kPa / 760mmHg) =
26.2kPa is the partial pressure of nitrogenCan someone pleasee help me with this asap!! Im struggling
4a. D - The last number in the configuration represents the group, in this case 3, and the number of shells represent the period, which is also 3.
4bi. Rubidium metal reacts very rapidly with water to form a colourless solution of rubidium hydroxide (RbOH) and hydrogen gas (H2). The resulting solution is basic because of the dissolved hydroxide. The reaction is very exothermic and explosive.
4bii. Lithium is smaller in size than potassium . so valence electrons are more tightly held in Li than K. Due to larger size of K the valence electrons are loosely held and easy to remove the electron from K. Hence K is more reactive.
Plz Answer this if you Answer this right you will get brainliest
Don't Answer this question if you don't know you will be reported
Reaction 1 :-
AlZn²⁺Zn²⁺AlReaction 2 :-
LiAl³⁺Al³⁺Li____________________Which is closer to the Sun—Neptune or the Earth?
O A.
The distance from the Earth to the Sun cannot be determined.
OB.
The Earth is closer to the Sun than Neptune is.
OC. They are the same distance from the Sun.
OD.
Neptune is closer to the Sun than the Earth is.
Answer: The earth is closer to the sun than neptune is
Explanation:
Answer:
The Earth is closer to the Sun than Neptune is.
Explanation:
pov
calculate the atomic mass of gallium if gallium has two naturally occurring isotopes with the following massess and natural abundances Ga-69 68.9256 amu 60.11% Ga-71 70.9247 amu 39.89
Answer: Atomic mass of gallium = 69.72304093 amu
Explanation:
We calculate the atomic mass of Gallium by using the Relative abundance of the isotopes.
Atomic mass =mass x Natural Abundance of Isotope 1 +mass x Natural Abundance of Isotope 2
(60.11/100 x 68.9256) + (39.89/100 x 70.9247)
= 41.43117816 + 28.29186283 = 69.72304093 amu
A mutation can cause which of the following in an organism?
1 Have no effect
2Be beneficial
3 Be harmful
6Causes a new trait
5 All of the above
Answer: 5 all of the above
Explanation:
A mutation can be a blessing or a curse. It can also have no effect on the person at all.
Hope this helps
What is the role of the producer in any food chain?
Question 1 options:
Producers turn light energy into food energy
Producers make the food that consumers eat
Without producers, consumers would starve
All of these answers are correct
Answer:
All of these answers are correct.
Explanation:
They are all correct because producers make their food(energy) through photosynthesis, they provide food to herbivores and therefore the rest of the food chain, and without them, the food chain would collapse and all the consumers would starve.
Which of the following is a method for measuring energy in food?
A. reading the label
B. filtration
C. chromatography
D. calorimetry
The power of the crane was 68600 W
Caculate the time taken for the crane to do 3430000 J of work
Give the unit
Answer:
t = 50 s
Explanation:
P = W/t
Solving for t,
t = W/P = (3430000 J)/(68600 Watts)
= 50 s
Note: 1 Watt = 1 J/s
According to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
What is Power?Power may be defined as the amount of energy that is significantly transmitted or converted per unit of time. In a more simple sense, it is also characterized as the measure of the rate of doing work.
According to the question,
The power of the crane = 68600 W.
The amount of work that the crane has to do = 3430000 J.
Time may be calculated with the help of the following formula:
Power = Work/time.Time = Work/power = 3430000 J/68600 W = 50 seconds. (where 1 W = 1 J/sec).Therefore, according to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
To learn more about Power, refer to the link:
https://brainly.com/question/1634438
#SPJ2
1
50.0 grams of an unknown metal is heated to 100.0°C and then placed in a calorimeter with 250.0 mL of water. If the final temperature of the
metal is 29.1°C and the calorimeter absorbed 824 Joules of energy, what
is the specific heat of the unknown metal? *
Which statement about noble gases is correct? *
They are extremely rare in nature.
They are highly reactive with both metals and nonmetals.
O They exist as single atoms rather than as molecules.
O They form compounds with very bright colors.
Answer:
Hello There!!
Explanation:
I believe the answer is O They form compounds with very bright colors.
hope this helps,have a great day!!
~Pinky~
The statement about noble gases that is correct is D. They form compounds with very bright colors.
Noble gases simply refers to the elements that have similar properties. Noble gases are colorless, odorless, and have very low reactivity.
Examples of noble gases are helium, argon, Krypton, xenon, etc. Noble gases also form compounds with very bright colors.
In conclusion, the correct option is D.
Read related link on:
https://brainly.com/question/24070118
Write the electronic configuration of the following element or ion and circle on their valance electrons
A.27 Al =
13
B. 31p-3
15
please answer my question now ! I will give you a Brinalist
1s2,2s2,2p6
Explanation:
electron arrangements
What mass of copper metal will be formed when excess magnesium metal is reacted with:
(a) 250.0 mL of a 1.0 M copper M chloride solution (b) 100.0 mL of a 0.25 M copper (II) chloride solution
Answer:
A
Explanation:
1.00 mole of an ideal gas occupies a volume of 22.4 L at 0 C and 760 mmHg (STP). It is cooled to -41 C while the pressure is increased to 805 mmHg. What is the new volume of the gas in liters?
Answer:
[tex]V_2=18.0L[/tex]
Explanation:
Hello there!
In this case, according to the given information, we infer that we need the combined gas law in order to solve this problem:
[tex]\frac{P_2V_2}{T_2}} =\frac{P_1V_1}{T_1}}[/tex]
Thus, by suing the temperatures in Kelvins, we can solve for the final volume as shown below:
[tex]V_2 =\frac{P_1V_1T_2}{T_1P_2}}\\\\V_2 =\frac{(760mmHg)(22.4L)(232K)}{(273K)(805mmHg)} \\\\V_2=18.0L[/tex]
Regards!
PLEASE HELP ME ASAP!!! 10 POINTS!!
The three equations below represent nuclear fission and nuclear fusion reactions. For each equation, tell whether fission or fusion has occurred and write the missing term in the equation.
A) ²³⁵₉₂ U+n→⁹⁵₃₈Sr+____+2n
B) ³₁H+²₁H→⁴₂H+____
C) ____+n→⁹²₃₉Y+¹⁴⁰₅₃I+2n
Explanation:
A) fission: Iodine-140 (atomic number = 53)
B) fusion: 1 neutron
C) fission: Uranium-233 (atomic number = 92)
SOMEBODY PLEASE HELP ME ASAP. WILL GIVE BRAINLIEST TO BEST ANSWER.
Answer:
135.80 g of Ag
Explanation:
[tex]40gCu *\frac{1mol Cu}{63.546g Cu} *\frac{2mol Ag}{1molCu} *\frac{107.868g Ag}{1mol Ag}[/tex]
~ 135.80 g of Ag
Why is this conveyor important for Earth?
Answer:
.
Explanation:
Answer:
The great ocean conveyor plays a highly significant part in the climate of the planet. It transports heat to the Polar Regions, for example. In doing so, the amount of ice that can be formed in these regions is limited.
how are fossils discovered
solute separates as a solid when a saturated solution is cooled why
Answer:
When a saturated solution at a high temperature is cooled, why is the solution separated as a solid? When a saturated solution at a high temperature is cooled, inter molecular space between the molecules of the solution decreases. As a result, no more solute can remain in a solution separating out as a solid crystal.
How many moles are in 25.0 grams of KMnO4?
0.124 mol KMnO4
0.158 mol KMnO4
0.199 mol KMnO4
0.316 mol KMnO4
Answer:
158 mol :)
Explanation:
Chemical symbols stand for?
Answer Explanation:
If it is like H, or O or N or Na or Cl, those are the elements. Those are on the Periodic table. pH is the acidity and basicity of a substance, how acidic or basic(caustic) it is. mol is Moles. kPa is kilopascals. STP is standard temperature and pressure, at 0*C(Celsius), or 273.15 K(Kelvin), and 101,325 pascals, or 101.325 kilopascals.
Avagadro's Number is 6.022x10^23, the number of atoms in a mole. The Ideal Gas Law is P(Pressure in kPa) times V(Volume in L, liters) equals n(number of moles of gas) times R(the universal gas constant, or 8.3145 (L kPa/K mol) or 8.3145 liters kilopascals per Kelvin mole. that is just a few of them.
Giving Bainliest!!!!!
In 2-3 sentences, describe the basic properties of waves including frequency, amplitude, wavelength, and speed.
Answer:
frequency: This is the number of oscillations in one second or number of complete wavelengths produced in one second.Amplitude: This is the maximum displacement of a particle from its mean position.Wavelength: This is the distance between one crest and another or one trough and another.Speed: This is the distance a wave travels in a given amount of time.What is a decay series?
a series of reactions that never ends
a different form of chemical bonding
a chain of decays that results in a stable nucleus
a series of chemical reactions that ends with a decay\
HELPPPPPP
Answer:
a chain of decays that result in a stable nucleus
Explanation:
Decay series is a series of decay in which radioactive element is decomposed in different elements until it produces one stable atom.
Answer:
C
Explanation:
took test Edg
What is the oil refining process?
Answer:
"the chemical engineering processes and other facilities used in petroleum refineries to transform crude oil into useful products such as liquefied petroleum gas, gasoline or petrol, kerosene, jet fuel, diesel oil and fuel oils"
-wikipedia
Explanation:
[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex]
An oil refinery or petroleum refinery is an industrial process plant where crude oil is transformed and refined into useful products such as petroleum naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, liquefied petroleum gas, jet fuel and fuel oils.
Thanks Hope it helps.____ are pieces of information that describe the appearance of the cell's content.
I think the answer is organelles.