Help me please!!

Label the 3 forms of heat transfer. Conduction,
convection, or radiation.

With a piece of cork connected, which has a mass of 15 g in air and a specific gravity of 0.25, the pair weighs 164.736 grammes when they are both submerged in water.

A physical body's mass is its total amount of matter. Inertia, or the body's resistance to acceleration (change of velocity) when a net force is applied, is also measured by this property. The gravitational pull an object has on other bodies is also influenced by its mass. A substance will float on water if its specific gravity is less than 1. sp gr, or specific gravity, is a common abbreviation. The following formula represents specific gravity, which is also known as relative density: Substance formula: substance / reference The purpose of comparing densities

60 grammes of water are equal to 15 grammes of cork when divided by 15.25. Lead's specific gravity is 11.35; its mass is (230+15)-(60+20.264); and its mass is 245 - (80.264) grammes.

Learn more about mass here

https://brainly.com/question/18064917

#SPJ4

The correct answer is only within a narrow path on earth. This is because the shadow of the earth during a total lunar eclipse is only large enough to cover a small area on the earth's surface.

A total lunar eclipse is visible only within a narrow path on earth, where the moon passes directly through the center of the Earth's shadow. This path, which is typically around 160 to 270 kilometers (100 to 170 miles) wide, moves eastward as the Moon orbits Earth.

During a total lunar eclipse, the moon is fully engulfed in Earth's shadow, making it visible to observers on a whole hemisphere of earth. However, an opportunity to observe the solar corona is not visible during a total lunar eclipse. The solar corona can only be seen during a total solar eclipse.

Learn more about lunar eclipse:

https://brainly.com/question/8643

#SPJ4

Ratio of the speeds of the boats with equal centripetal acceleration is 0.7.

Centripetal acceleration is defined as the change in tangential velocity and is experienced during uniform circular motion. It has a magnitude equal to the square of the body's speed v along the curve divided by the radius r (or distance) from the centre of the circle to the moving body. The centripetal acceleration ac is given by:

ac = v^2/ r

For the boat A:

ac = va^2/ 120

For the boat B:

ac = vb^2/ 240

As provided, the centripetal acceleration is equal for both boats, hence

va^2/ 120 = vb^2/ 240

va^2/vb^2 = 120/240

va^2/vb^2 = 0.5

va/vb = √0.5 = 0.7

Hence, the ratio of the speeds of the boats is 0.7

Learn more about Centripetal acceleration:

https://brainly.com/question/79801

#SPJ4

To establish mechanical equilibrium, the fulcrum must be placed 3.27 m away from the 250 N weight.

The position of the fulcrum from the 250 N weight is determined by applying the principle of moment as shown below.

let the position of the fulcrum = d

The position of the 250 N from the fulcrum must be greater than the center of the beam since 300 N is heavier than 250 N.

----------------------------------Δ--------------------------------

↓                                     d                                      ↓

250 N                                                                    300 N    

the position of the 250 N weight from the fulcrum = d

the position of the 300 N weight from the fulcrum = 6 m - d

take moment about the pivot;

sum of the antic lock wise moment = sum of the clockwise moment

250 ( d ) = 300 ( 6 - d )

250d = 1,800 - 300d

550d = 1,800

d = 1,800 / 550

d = 3.27 m                              

Thus, the position of the fulcrum from 250 N depends on the length of the beam and the weight hanging at the other end.

Learn more about fulcrum here: https://brainly.com/question/21577134

#SPJ1          

Air in an ideal Diesel cycle is compressed from 4 L to 0.25 L, and then it expands during the constant pressure heat addition process to 0.50 L. Under cold air standard conditions, the thermal efficiency of this cycle is 65.2%.

For an air standard engine with γ = 1.4, compression ratio r and fuel cut off ratio rc where r = V1/V2

and rc = V3/V2 and V1 = 4l, V2 = 0.25l and V3 = 0.50l

The efficiency (n) of diesel cycle is ----

n = 1 - [1 / r^(γ - 1)] * (rc^γ -1) / γ(rc - 1)

n = 1 - [1/(4/0.25)^(1.4-1)] * (0.50/0.25)^1.4 - 1 / 1.4 [(0.50/0.25) -1 ]

n = 1 - [1/3.03] * [2.63 - 1] / 1.4x1

n = 0.652

n% = 65.2%

To learn more about thermal efficiency, visit----

https://brainly.com/question/14287776

#SPJ4

The cyclist is behind the car. The conclusion is from the analysis using the Doppler's effect equation.

The Doppler's effect is a phenomenon when the source of a wave and an observer move relative to each other, the frequency heard is not the same with the actual frequency.

The equation of the Doppler's effect is

f₀ = [(v ± v₀)/(v ± vs)] × fs

Where

Note:

We have an actual frequency of 440 Hz from a car's horn. The frequency heard by an observer, i.e. a cyclist, is 422 Hz. The speed of the cyclist is 1/5 the car's speed in the same direction. Determine if the cyclist is ahead of or behind the car!

To answer the question, we should know how the car and the cyclist move relative to each other.

Let's say:

Use the equation of the Doppler's effect!

f₀ = [(v ± v₀)/(v ± vs)] × fs

422 = [(v ± a)/(v ± 5a)] × fs

422/440 = (v ± a)/(v ± 5a)

We get:

(v ± a) < (v ± 5a)

In the same direction, one should move closer and another should move away. The arithmetic operation of v₀ and vs would be the same.

The equation would be

422/440 = (v + a)/(v + 5a)

The car is moving away from the cyclist and the cyclist is moving closer to the car. Look at the illustration in the attachment!

Hence, the cyclist hearing the frequency of 422 Hz from car's horn is behind the car.

Learn more about Doppler's effect here:

https://brainly.com/question/29558588

#SPJ4

In drawing, the holding force is most likely to be lower than the maximal drawing force.

By using a special method called FORCE Drawing, you can learn to see things more clearly and to comprehend what you are looking at. This will help you to draw from life and from your imagination with great talent and understanding.

All forces operating on an item, their direction, and their magnitude are represented in a force diagram. The image has been streamlined to only depict the forces.

The term "force diagram," sometimes known as a free body diagram, refers to a sketch in which all force vectors acting on an object are shown with their initial points at the location of the object.

To learn more about drawing force refer to:

https://brainly.com/question/15220800

#SPJ4

The asteroids are moved by Jupiter under the influence of (b) orbital resonances.

What are asteroids ?

Small, stony objects called asteroids orbit the Sun. Asteroids, sometimes known as minor planets, are rocky, airless debris from the early stages of the solar system's creation, which occurred around 4.6 billion years ago.

When two satellites' orbital periods are related by integer relationships, they can exert gravitational pull on one another and change the eccentricity of their orbits, resulting in an orbital resonance. Io, Europa, and Ganymede are the three inner moons of planet Jupiter. They are locked in a 4:2:1 orbital resonance, which means they are playing the same note in different octaves. The tones that Callisto and Ganymede produce are almost an octave and a minor third apart because they are almost in a 12:5 resonance.

To learn more about planets click here:

https://brainly.com/question/4189441

#SPJ4

The correct answer is b.

The given statement is true for sufficiently short distances.

At the end of t seconds, the distance travelled by a freely falling object with zero initial velocity is [tex]s=ut+1/2 gt^{2}[/tex]

where s is the displacement, t is the time, u is the initial velocity and g is the acceleration due to gravity.

Here, when the object is under free fall, its initial velocity, [tex]u=0 m/s[/tex]

Gravity continuously accelerates an object (increases its velocity) during free fall until it reaches terminal velocity. In particular, for every second that passes, gravity accelerates a falling object by 9.8  (m/s). (Acceleration is measured in meters per second squared, or m/s2, whereas velocity is measured in m/s.)

It is only sometimes true that an object falling freely needs to travel a greater distance in one second than it did in all the preceding seconds. However, if the object is falling under the influence of gravity for very short distances, the above claim can be approximately true.

To know more about free fall here

brainly.com/question/13299152

#SPJ4

It is erroneous to claim that mirrors are not used by microscopes to magnify objects.

A microscopy is a tool that may be used to examine tiny things, including cells. By at least one lens, the microscope magnifies the picture of an item. This lens twists light in a way that causes it to look as though an item is larger than the amount is.

The microscopy, which is the most popular and the first to be created, employs lenses to diffract visible light that has gone through a thinly sheared material to create a viewable picture.

To know more about Microscopes visit:

https://brainly.com/question/14004128

#SPJ4

The magnetic field of the solenoid will be 30.79 T.

Magnetic field strength is a quantitative measure of the strength or weakness of a magnetic field.

Length of solenoid, L = 1.5 cm = 0.015 m

Radius of solenoid, r = 0.65 cm = 0.0065 m

Number of turns, N = 49 turns

Current, I = 1.45 A

Magnetic field, B, can be calculated as B = (N*r*I) /L

B = (49 * 0.0065 * 1.45)/0.015

B =  30.79 T

The magnitude of the magnetic field inside the solenoid is 30.79 T.

To know more about magnetic field,

https://brainly.com/question/29347692

#SPJ4

The Jovian planets lack solid surfaces, in contrast to the terrestrial planets Mercury, Venus, Earth, and Mars that make up our inner solar system.

Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune are listed in order of their angular separation from the sun. Previously thought to be the furthest planet, Pluto is now categorized as a dwarf planet.

The Jovian planets lack solid surfaces, in contrast to the terrestrial planets Mercury, Venus, Earth, and Mars that make up our inner solar system. As opposed to that, their atmospheres contain minute amounts of methane, ammonia, water, and other gases, and they are largely made of hydrogen and helium.

To know more about Jovian planets visit:-

https://brainly.com/question/18089177

#SPJ4

Voltage is proportional to inductance just as, for resistors, it is proportional to resistance. Now, the (independent) voltages for parallel elements are equal (V₁ = V₂) and the currents (which are generally functions of time) add i(t) = i₁(t) + i₂(t)

This leads to the equation,

i = i₁ + i₂ + i₃ = V [(1/R₁) + (1/R₂) + (1/R₃)] for resistors.

We note that this condition on the currents implies

d₁(t)/dt + d₂(t)/dt = d(it)/dt

Thus, although the inductance equation, ε = -L(di/dt) involves the rate of change of current, as opposed to current itself, the conditions that led to the parallel resistor formula also apply to inductors.

Therefore, 1/L(eq) = 1/L₁ + 1/L₂

Therefore to ensure the independence of the voltage values, it is important that the inductors not be too close together. The requirement is that the field of one inductor not to have significant influence (or "coupling") in the next.

To know more about inductance, refer: https://brainly.com/question/10254645

#SPJ4

The two statements that accurately describes this variation are that low tides are lowest at both full moon and new moon, high tides are highest at both full moon and new moon.

What is the reason for this?

As the video shows, the tidal minima are smallest and the tidal bulges are largest at full moon and new moon, because those times when tidal forces due to the Sun and Moon get aligned (and therefore add to one another).

So, high tides are higher and low tides are lower at these times, and these are called spring tides. (In contrast, we have neap tides at first- and also third-quarter moons, when high tides are not as high and low tides are not as low as usual.)

Therefore, the two statements that accurately describes this variation are that low tides are lowest at both full moon and new moon, high tides are highest at both full moon and new moon are .

Learn more about tides here: https://brainly.com/question/2604305

#SPJ4

The work done in by the attendant on a can of soup is 2.3 J.

What is Work in physics?

Work in physics is defined as the dot product of force and the displacement produced by it.

Given is an attendant who pushed 0.450 m horizontally with a force of 5.10 N.

From the definition of work done, we can write -

W = F.d

W = Fd cosФ

Then angle between force and displacement is 0°. Therefore, cosФ is equal to 1.

Work = Fd

Work = 5.10 x 0.450

Work = 2.295 joules = 2.3 J

Therefore, the work done in by the attendant on a can of soup is 2.3 joules.

To know more about work, refer: brainly.com/question/15520290

#SPJ4

If you measure and calculate the density of a cube by the method of displacement, and then later use that same cube to measure and calculate the density by the method of flotation you should expect to obtain the same density.

To know more about density visit:

https://brainly.com/question/14937732

#SPJ4

Applying the Work-Energy Theorem, the Work Done by a Non-Conservative Force is [tex]5.3 *10^{10}[/tex] J

The given Parameters are :

Initial Velocity (u) = 120 m/s

Final Velocity (v) = 7950 m/s

Mass (m) = 1770 kg

Displacement (h) = 146 km = 146000 m

According to the Work-Energy Theorem,

The Work Done is given by the difference between the final and initial Kinetic Energies,

Thus,

Work Done = Final Kinetic Energy - Initial Kinetic Energy

Now, Work done = Work done by gravity + Work Done by Non-Conservative Force

So, Work Done by gravity = mgh = 1770 *10*146000 =2482000000 J

Change in Kinetic Energy = [tex]\frac{1}{2} *m*(v^{2} -u^{2} )[/tex]

Putting the values, we get,

Change in Kinetic Energy = [tex]\frac{1}{2} *1770*(7950^{2} -120^{2} )=55921468500[/tex] J

Now, Work Done by Non Conservative Force = Change in Kinetic Energy-Work Done by gravity = 2482000000 - 55921468500 = 53439468500 = 5.3 * [tex]10^{10}[/tex] J

To read more about Work-Energy Theorem, visit https://brainly.com/question/10063455

#SPJ4

The astronomer will take 0.086 hours to observe the radius of the black hole.

What is black hole?

In a black hole, the gravity is so intense that not even light can escape. The radius of black hole depends on the mass of the black hole.

The astronomer has determined a black hole's radius to be 51.0 au by examining its period of brightness variability.

The term "astronomical unit" (abbreviated "au") refers to a unit of length used to calculate the separation between the Earth and the sun.

1 au = 93 million miles.

Additionally, the radius is determined by the brightness variation, which takes the speed of light into account.

Light speed = 3 * [tex]10^8[/tex]m/s.

So,

time = distance / speed time

= 93 * [tex]10^9[/tex] / 3 *  [tex]10^8[/tex] time = 310 seconds.

1 second = 0.0002 hours.

310 seconds = 0.086 hours.

The astronomer will take 0.086 hours to observe the radius of the black hole.

To know more about black hole, check out:

https://brainly.com/question/15364805

#SPJ4

The amplitude drops to one-quarter of the initial value after 102.7 oscillations.

λ=1/51⋅0.20slog(1/2)=−0.68s^-1

Using the previous result we can evaluate the amplitude as a function of time to obtain the elapsed time until the amplitude drops to one-quarter of its initial value,

1/4=Aeλt.

Solving for the time,

t=1/λlog(1/4)=20.4s

Comparing this result with the period,

t=102.7T.

The maximum displacement or distance made by a point on a vibrating body or wave relative to its equilibrium location is known as the amplitude in physics. It is equivalent to the length of the vibration path divided in half. Amplitude is the separation between the wave's resting position and its highest displacement. Frequency is the number of waves that cross a particular place in a second. Period—the length of time needed for a wave cycle to complete

Learn more about amplitude here:

https://brainly.com/question/9525052

#SPJ4

I don't see a picture attached to your question. Without one, I don't think I will be able to determine what type of orbit is displayed.

When a satellite revolves around the Earth at a speed of v2=31300 m/s, there is no torque on the Earth.

What does the term "torque" mean?

A torque is an angular force that tends to generate rotation along an axis, which could be a fixed point or the center of mass. Torque can also be conceived of as a spinning object's capacity to overcome turning resistance, such as a gear or a shaft.

In vehicles, what does torque mean?

When used to describe internal combustion engines or electric motors, torque refers to the force acting on the driving shaft. Torque is measured in newton-meters or pounds-feet (lb-ft) (Nm). Engine power is determined by the relationship between torque and engine speed (rpm).

Briefing:

mv1r1=mv2r2

2500*6260=v2*500

v2=31300m/s

To know more about torque visit:

https://brainly.com/question/29024338

#SPJ4

The ratio of the skater's moment of inertia when they have their arms extended to when their arms are not is r²/(r+r₁)².

The moment of inertia of any particular object can be defined as the opposition displayed by the object in question whenever its speed of rotation is changed when any external(turning) force is applied.

Let us assume that the moment of inertia of the skater when they don't extend their arms be = mr² (i)

Here, r is the radius of their body with their arms squeezed in.

The moment of inertia when the skater will extend their arms outwards is going to be = m(r+r₁)² (ii)

Here, r₁ is the radius of the hands when they are extended.

Comparing and equating (i) and (ii), we get -

Ratio =  r²/(r+r₁)²  (m is common for both so it gets canceled)

Henceforth, here is the ratio for when the skater has their arms extended to when their arms are not.

Learn to know more about the moment of inertia on

https://brainly.com/question/15246709?referrer=searchResults

#SPJ4

The speed of light in vacuum is(3*10^8 m/s).

What is speed?
The speed of an object, also known as v in kinematics, is the size of the change in that object's position over time or even the size of the change in that object's position per unit of time, making it a scalar quantity. The initial speed is the upper limit of a average speed as that of the duration of a time interval gets closer to zero. The average speed of the object in a period of time is indeed the distance travelled by object divided by duration of the interval. Velocity and speed are not the same thing. The dimensions of speed are time divided by distance.

The velocity of the light in the material is 0.2c, where c is the speed of light in vacuum (3*10^8 m/s).

The frequency of the light in the material is equal to the frequency of the light in vacuum divided by the index of refraction, which is equal to (3*10^8 m/s) / 50 = 6*10^6 m/s.

To learn more about speed
https://brainly.com/question/4931057
#SPJ4

The period measured by student b using analog wristwatch is more accurate because of less percentage of error.

Accuracy is the capacity of an instrument to measure the precise value. In other words, it refers to how closely the measured value resembles a reference or genuine value. Small readings can be taken to increase accuracy. The calculation's error is decreased by the little reading.

Given that:

period of oscillation, t = 1. 55 s.

an average period for the 5 oscillations obtained by student a: t = 1. 25 s.

average period for the 5 oscillations  obtained by student b: t = 1. 6 s

Hence, error percentage of student a = (1.55-1.25)/1.55 × 100% = 19.35%

error percentage of student b = (1.60-1.55)/1.60  × 100%  = 3.22%

Hence,  period measured by student b is more accurate because of less percentage of error.

Learn more about accuracy  here:

https://brainly.com/question/14244630

#SPJ1

Electrostatic potential energy overall The unit of this charge system is -6.71kq2/d.

Who was the first to define energy?

The term "energy" was originally used in the field of science by Thomas Younger in 1800, but it did not catch on. Young later used interfered experiments to prove that light is a wave.

Briefing-

The expression for the electric potential energy is,

U= k*q1q2/d

The electric potential energy due to charges +2q and +5q is,

U25=k*(10q2)/d

The electric potential energy due to charges +2q and +q is,

U21=k*(2q2)/d

From the above figure, the distance between charges +2q and -3q is

√d² +√ d² = √2d²

= √2d

The electric potential energy due to charges +2q and -3q is,

U23=-k(6q2)/√2d

Thus, the total electric potential energy of the system is,

Utot=U25 +U21+U23 +Us1+U53 +U31

=k*(10q²)/d+k*(2q²)/d-k*(6q2)+k* (5q2)/√2d + k (10g2)/√2d

-k. (15q2)/d-k(3q2)/d

= [10+2-6/√2 + 5/√2 -15-3]kq2/d

=-6.707 kq2/d

=-6.71kq2/d

Utot=-6.71kq2/d =(approximately)

To know more about energy visit:

https://brainly.com/question/1932868

#SPJ4

The complete question is-

Four point charges form a square with sides of length dd, as shown in the figure. In the questions that follow, use the constant k in place of 1/4πϵ0.

Part A: What is the electric potential Vtot at the center of the square? Make the usual assumption that the potential tends to zero far away from a charge. Express your answer in terms of q, d, and appropriate constants.

Part B: What is the contribution U2q to the electric potential energy of the system, due to interactions involving the charge 2q? Express your answer in terms of q, d, and appropriate constants.

Part C: What is the total electric potential energy Utot of this system of charges? Express your answer in terms of q, d, and appropriate constants.

Force exerted by the ball on the rope is 24.5 N.

Force is an external influence that can change the velocity or motion of an object.

mass of the ball = 1.5 kg

Radius of the circle = 3 m

Speed at which the ball is rotating = 7 m/s

Since the ball is rotating in a vertical circle, centripetal force acts on it.

Centripetal force is the force exerted on a rotating object and the gravitational force in a vertical circle is zero.

Mathematically centripetal force is Fc = mv²/r

Fc = 1.5 * (7)²/ (3)

Fc = 24.5 N

Force exerted by the ball on the rope at the top of the vertical circle is 24.5 N.

To know more about Force,

https://brainly.com/question/2600850

#SPJ4

Yes if there is no energy losses, the pulse will propagate along the rope without changing its original shape.

In every rope, the least dense rope has the largest wavelength. Crossing a barrier does not change a wave's frequency. If a wave in a less dense rope is traveling toward a border with a more dense rope, the reflected pulse will become inverted. The pulse will travel the length of the rope without altering its original shape if there are no energy losses.After reflecting off the fixed end, the pulse is inverted. To put it another way, a pulse with an upward displacement will reflect off the end and return with a downward displacement. When the medium's end is fixed, this characteristic of inversion will always be seen. When a wave or pulse moving through one medium encounters the boundary of another, a portion of the incident pulse is reflected off the border and a portion is transmitted over the boundary.

Learn more about energy here:

https://brainly.com/question/29213676

#SPJ4

Answer:

a) Bathroom mirror shows the person younger than the actual age.

b) I stand about 47 m from my bathroom mirror

Reason:

a) Light takes a finite time to travel from the object to the mirror and then to the eye. Thus the speed of light in air is approximately equal to 3×108m/s 3 × 10 8 m/s. So the light takes approximately 7 nanoseconds to reflect off the mirror and return to our eyes.

b) This means that the reflection we see in the mirror has an age difference on the order of 10−9 seconds younger than ourselves.

find more: https://brainly.com/question/14782824?referrer=searchResults

#SPJ4

64 N force would be required to make a mass of 8 kg accelerate at

8m/s².

The term "force" is defined precisely in science. It is acceptable to refer to a force of this level as a push or a pull. An item does not "have in it" or "contain" a force. Another item applies force to another. The concept of a force does not apply only to living or non-living entities.

The newton (sign N) is the SI unit of force.

The fundamental formula for force is F = ma, where F represents force, m represents mass in kilograms, and a represents acceleration in m×s⁻². It is the second law of motion established by Newton.

Given that,

Acceleration (a) = 8m/s²

Mass (m) = 8 kg

Force (F) = ?

As we know,

Force= mass × acceleration

F = 8 kg × 8 m/sec²

F = 64 N

Therefore, force of 64 N is required to accelerate the body.

To know more about force refer to:

https://brainly.com/question/12785175

#SPJ1

The angular momentum of the disk: 0881 kg*m^2/s.

In Newtonian mechanics, momentum is the made of the mass and velocity of an item. it's far a vector quantity, owning a value and a route. If m is an item's mass and v is its speed, then the object's momentum p is mathbf{p} = m mathbf{v}.

-A truck complete of goods has a huge mass and so it has to gradually down earlier than a prevent light as it has a massive momentum with the same speed and so it's far very difficult to forestall. -A shifting bullet has a large momentum since it has an extremely big pace although it consists of a very small mass.
Learn more about momentum here:

https://brainly.com/question/402617

#SPJ4