Answer:
2Na+Cl2 -> 2NaCl
Explanation:
1Na+1Cl 2 -> 1NaCl (i'm assuming they want you to balance it so ill start with 1)
Na = 1
Cl = 2 (it is 2 because it is Cl2, meaning that there are 2; but remember that you cannot change this number only coefficients)
Na = 1
Cl = 1
We need to have 2 Cl on the product side
1Na+1Cl 2 -> 2NaCl
Now we need 2 Na on the reactants side
The final equation is
2Na+Cl2 -> 2NaCl
Now it is balanced
Na = 2
Cl = 2
--
Na = 2
Cl = 2
Facts about flooding
Answer:
No region is safe from flooding. All 50 states are subject to flash floods.[1]
Flash floods can bring walls of water from 10 to 20 feet high.[2]
A car can be taken away in as little as 2 feet of water.[3]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[4]
Flooding is caused by spring thawing (snow and frozen grounds melting in the spring), heavy rains, snow melt runoffs, flash floods, and mudflows.[5]
Floods are the most widespread natural disaster aside from wildfires. 90% of all U.S. natural disasters declared by the President involve some sort of flooding.[6]
In preparation for a flood, it is important to stock up on first aid items, non-perishable foods, 3 gallons of water per person for 3 days, battery operated radio for weather reports, extra batteries, personal hygiene necessities.[7]
Based on Floodsmart, a 2,000 square foot home undergoing 12” of water damage could cost more than $50,000.[8]
Since flood damage is almost never covered by homeowners insurance, flood insurance is important for people living in high-risk flood zones.[9]
To stay safe during a flood, go to the highest ground of floor possible. If your skin comes in contact with flood water, make sure to wash it with soap and disinfected water because the contents are unknown.[10]
Communities particularly at risk are those located in low-lying areas, near water, or downstream from a dam.[11]
what is the difference b/w combustion and synthesis reaction ?explain with example
Answer:
A synthesis reaction occurs when two or more reactants combine to form a single product in a double replacement reaction two compounds exchange elements. Combustion reaction occurs when a substance reacts quickly with oxygen combustion is commonly called burning. Example'- for synthesis reaction is iron+ oxygen —≥ water . Example:- for combustion reaction is often gaseous products.
may be this was ur answer I hope it might help u
A solution of 1.8274g of a polypeptide in 274mL of a aqueous solution has an osmotic pressure at 31.40 degrees C of 2.012 mmHg. The approximate molecular weight of this polymer is _____ g/mol.
Answer: Hence, the approximate molecular weight of the poymer is 64106 g/mol
Explanation:
[tex]\pi=CRT[/tex]
where,
[tex]\pi[/tex] = osmotic pressure of the solution = 2.012 mm Hg = 0.0026 atm
i = Van't hoff factor = 1 (for non-electrolytes)
Mass of solute (polypeptide) = 1.8274 g
Volume of solution = 274 mL
R = Gas constant = [tex]0.0821Latm/Kmol[/tex]
T = temperature of the solution = [tex]31.40^0C=(273+31.40)K=304.4K[/tex]
Putting values in above equation, we get:
[tex]0.0026=\frac{1.8274 g\times 1000}{M\times 274ml}\times 0.0821\times 304.4[/tex]
[tex]M=64106g/mol[/tex]
Hence, the approximate molecular weight of the poymer is 64106 g/mol
if water is added to a 0.70 molar solution of CuSO4 what will change
A. molarity will increase
B. Molarity will decrease
C. the amount of CuSO4 will decrease
D. No change in molarity or amount of salute
Answer:
B. Molarity will decrease
Explanation:
Molarity is one of the measures of the molar concentration of a solution. It is calculated by dividing the number of moles of the solute by the volume of the solvent. This means that the higher the amount of solute in relation to the volume of solvent, the higher the molarity of that solution.
In essence, adding water to a solution dilutes it i.e it increases the solvent's volume in relation to the solute, causing the molarity to decrease. In a nutshell, diluting a solution (by adding water or more solvent) causes the molarity of such solution to decrease. For example, if water is added to a 0.70 molar solution of CuSO4, the molarity of the solution will DECREASE.
What do acids do in solution?
In an ecosystem, which of the fcHlowing is NOT a trait of living organisms?
Contains DNA
Can reproduce
Made of cells with membrane
Responds to stimuli
Answer:
responds to a stimuli or made of cells with membrane
Explanation
If the moon is full on January 16, on approximately what date will it be full in February?
A. February 10
B. February 22
C. February 1
D. February 12
Answer:
February 12th.
Explanation:
Trust me.
Equilibrium constant Kp for the reaction P4(s) + 6Cl2(g) 4PCl3(l) Kp = 1/ P6Cl2 Kp = P4Cl3/ P6P4 Kp = P4Cl3/ (P6P4) (P6Cl2) Kp = 1/ (P6P4) (P6Cl2)
Answer: [tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Explanation:
Equilibrium constant is defined as the ratio of pressure of products to the pressuure of reactants each raised to the power their stoichiometric ratios. It is expressed as [tex]K_p[/tex]
For the given chemical reaction:
[tex]P_4(s)+6Cl_2(g)\rightarrow 4PCl_3(l)[/tex]
The expression for [tex]K_p[/tex] in terms of gaseous is written as:
[tex]K_p=\frac{1}{[p_{Cl_2}]^6}[/tex]
Which of the following best describes the difference between metals and nonmetals?
a
metals tend to have low melting points and nonmetals have high melting points
b
nonmetals are more reactive than metals
c
metals are brittle and dull
d
metals have high melting points and are malleable, whereas, nonmetals have lower melting points and tend to be brittle.
Answer:
the answer is d.
Explanation:
because metals are refers to natural elements that are hard, shiney, opaque, and dense. nonmetals implies thise chemical substances that are soft, non-shiney, transparent and brittle.
Sound Wave, Ripple in water, Guitar String, TV Signal, Which one does not belong? Why?
Answer:
The TV signal.
Explanation: Hope this is right! :)
Identify any incorrect formulas. Explain your answer.
a. Mg2(SO4)3
b. Rb3As
c. BeCl3
d. NaF
Wish I could award more points but I'm running low.
The formula of a compound is written based on the valency of each bonded atoms. The formulas Mg₂(SO₄)₃, Rb₃As are incorrect. Such compounds does not exist.
What is chemical formula?The formula of a chemical compound is written based on the number of atoms participated in bonding. Magnesium is second group element having two valence electrons.
Magnesium thus donates its two electrons into the bonding atom or group. The sulphate group SO₄ have a valency of 2 it gains two electrons from Mg when bonded.
Thus the formula of magnesium sulphate being MgSO₄ and not Mg₂(SO₄)₃. Similarly Rb is a second group metal having two valence electrons. Its valency being two. As is a halogen with valency one. Thus they cannot form a compound like Rb₃As.
Hence, option a and b are incorrect formulas.
To find more about chemical formulas, refer the link below:
https://brainly.com/question/11995171
#SPJ2
Which is an energy source for a coyote?
Answer:
The coyotes are both a plant and meat eaters whose common food is 90% of their diet, is small animals. Rabbits, hares, birds, snakes, fish, crustaceans, and insects are all on the menu.
hopefully this is right :))
Answer:
sun
Explanation:
questions.
1) The degree of polarity of a bond is indicated by
A. Ionization energy difference
B. The shape of the molecule
C. Electronegativity difference
D. The partial charges of the molecule
2) When electrons are shared unequally, chemists characterize
Answer:
d
Explanation:
the partial charges of the molecule
a car motor running as a car travels down the road.
Kinetic Energy
Potential Energy
Answer:
kinetic energy
Explanation:
force is used
What is the name of this nuclear process ?
Answer:
Fission
Explanation:
Why are most anions basic in H2O? Give formulas of four anions that are not basic.
Answer:
The anions that can act as bases (conjugate bases of weak acids) have the capability to hydrolyse water and produce OH− ions. Cl−, Br−NO−3, SO2−4 are all conjugate bases of strong acids that don't have the capability to hydrolyse water and so they aren't basic.
Explanation:
Characteristics of a substance that describe its' ability to change into a different substance are called?
How many atoms can be found in 6.7 moles of Bromine (Br)
Question 7 options:
4.03 x 10^24
9.13 x 10^-24
8.99 x 10^22
3.31 x 10^24
Answer:
The first one is correct, 4.03 x 10^24.
Which rate law is consistent with the mechanism?
1.
a) If 1.08 g of sodium sulfate reacts with an excess of phosphoric acid, how much sulfuric acid is produced? (0.74577)
b) If 0.726 g of sulfuric acid is produced in the laboratory experiment, what is the percent yield of sulfuric acid? (97.3190)
2.
If 3.2 moles of sodium sulfate is used in the reaction, how many formula units of phosphoric acid is needed to completely react?
(1.28427×1024
Answer:
1. a) 0.745 g of H₂SO₄
b) 97.4%
2. 1.28×10²⁴ formula units
Explanation:
First of all, we determine the equations:
3Na₂SO₄ + 2H₃PO₄ → 3H₂SO₄ + 2Na₃PO₄
We determine, the moles of sodium sulfate. (As the acid is in excess, we work with the salt)
1.08 g . 1mol/ 142.04g = 0.00760 moles.
Ratio is 3:3. So 3 moles of salt can produce 3 moles of sulfuric acid,
Then, 0.00760 moles will produce the same amount of acid.
We convert the moles to mass → 0.00760 mol . 98 g/mol = 0.745 g
Percent yield = (Produced yield /Theoretical yield) . 100
(0.726 g / 0.745 g) . 100 = 97.4 %
2. 3 moles of sodium sulfate need 3 moles of phosphoric acid to react
Then, 3.2 moles of salt will react to (3.2 . 2)/3 = 2.13 moles
Let's count the formula units:
2.13 mol . 6.02×10²³ formula units /mol = 1.28×10²⁴ formula units.
describe un modelo matemático para representar lo que sucede en cada una de las reacciones químicas (incluye toda la simbología que puedas) y clasifícalas según consideres de acuerdo con lo abordado en el tema.
1. El hidrógeno molecular reacciona con el oxígeno molecular y produce agua
2. El Óxido de calcio reacciona con el agua y produce hidróxido de calcio
3. El sulfuro de hierro (II) se produce cuando reacciona el azufre y el hierro en su forma atómica
4. El ácido sulfuroso se descompone por la acción de calor en dióxido de azufre gaseoso y agua
5. El carbonato de calcio se descompone por la acción de calor en oxido de calcio y dióxido de carbono gaseoso.
6. El magnesio reacciona con el ácido clorhídrico y produce dióxido de magnesio e hidrógeno gaseoso.
AYUDAAAAA
Responder:
2H2 + O2 → 2H2O
CaO + H2O → Ca (OH) 2
Fe + S → FeS
H2SO3 → SO2 + H2O
CaCO3 → CaO + CO2
Explicación:
2H2 + O2 → 2H2O
2 moléculas de hidrógeno gaseoso reaccionan con oxigente para producir 2 moléculas de agua
CaO + H2O → Ca (OH) 2
El óxido de calcio reacciona con el agua para producir hidróxido de calcio.
Fe + S → FeS
El hierro reacciona con el azufre para producir sulfuro de hierro.
H2SO3 → SO2 + H2O
Por descomposición, el ácido sulfuroso se descompone para producir dióxido de azufre y agua.
CaCO3 → CaO + CO2
El carbonato de calcio se descompone para producir óxido de calcio y dióxido de carbono.
Kevin is working on a model that shows the positions of Earth, the Moon, and the Sun during the phases of the Moon. How should he position them to show a New Moon?
Which of the following is not an example for electroplating? A Tin cans for storing food
B Chromium used on bath taps to get shiny appearance
C Copper used for making electrical wires
D To protect iron objects used in machineries, from corrosion
If you answer you will get brainiest
Please answer and thank
Answer:
C. Copper used for making electrical wires
Explanation:
When a coating of a particular metal is applied on another metal, the process is termed as electroplating. The process is carried by the process of electro-deposition. This process is carried on in order to enhance the quality of the objects manufactured. The coating helps in resistance and provides an attractive appearance to the object.
Option C. is not an example of electrocoating because on the copper wires no other metal coating is done. In all the other three options, coating has been done on the object.
I could swear all of these are nobles gases but here’s the question.
Which one of these is NOT a Noble Gas
A) Argon
B) Helium
C) Xenon
D) Neon
Determine the correct set-up below to determine what mass, in grams, of N2 is needed to completely react with 105 g F2 ?
Answer:
C: 1 mol F2/38 g F2
Explanation:
The reaction equation is;
N2 + 3F2 = 2NF3
Now, to know how many grams, of N2 is needed to completely react with 105 g F2 and since the molar mass of N2 is 28.02 g/mol, Molar mass of F2 is 38 g/mol, number of moles attached to N2 and F2 in the reaction are 1 and 3 moles respectively, then we will have;
105 g F2 × 1 mol F2/38 g F2 × 1 mol N2/3 mol F2 × 28.02 g N2/1 mol N2
Option C is Thus correct
menciona tres ejemplos en los que un cálculo incorrecto en los en ingredientes indispensables para la elaboración de un producto traería consecuencias graves químicamente hablando
Explanation:
Cada producto o servicio, independientemente de su propósito, debe ser seguro de usar y desarrollado de acuerdo con los más altos estándares de calidad y seguridad.
Algunos ejemplos de cálculo incorrecto de ingredientes que tendrían graves consecuencias químicas podrían ser:
Medicamentos y vacunas: Este es quizás uno de los ejemplos que tendría las consecuencias más graves para las personas si hubiera un cálculo incorrecto de ingredientes, ya que la producción de medicamentos y vacunas es una industria que requiere la máxima calidad agregada debido a que se ocupa directamente de la salud y los errores de formulación pueden agravar la enfermedad y causar la muerte. Actualmente tenemos el ejemplo de la vacuna para el control de la pandemia, que antes de ser aprobada tuvo que someterse a una serie de investigaciones, pruebas en humanos y diferentes fases para demostrar su efectividad y no causar daño al organismo humano.
Cosméticos: Existen cosméticos de la industria de la belleza que tienen la función de prevenir el envejecimiento cutáneo, alisar el cabello, etc. Por tanto, un cálculo incorrecto de los ingredientes químicos también podría provocar daños irreversibles a la salud, como quemaduras en la piel, caída del cabello, alergias, cáncer, etc.
Alimentos: La industria alimentaria utiliza componentes químicos con el fin de conservar los productos y aumentar la vida útil, por lo que si se usan en cantidades mayores de las necesarias, dichos compuestos pueden causar enfermedades en las personas como intoxicación alimentaria, cáncer, gastritis, etc.
What group on the periodic table has the fewest valance electrons
Answer:
Alkali metals
Explanation:
The lowest number of valence electrons is found in the alkali metals (group 1), which have only one valence electron per atom.
Answer:
Alkali metals:) im 100% sure because i just got done learning everything in the periodic table:)
Explanation:
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
finally found
31th July 2000
Question number 12 I need help
Answer: Its B.
Explanation:
i cant quite explain
List and Describe the two groups of clastic sedimentary rock.
Answer:
Clastic sedimentary rocks are formed from rock fragments or clasts; chemical sedimentary rocks precipitate from fluids, and biochemical sedimentary rocks form as precipitation from living organisms.
Sedimentary rock is classified into two groups based on how they form. They are clastic and chemical. Clastic sedimentary rock is formed as bits of weathered rock become cemented together. Because all kinds of rock are subject to weathering many different minerals can make up this group of rocks.