Heellppppppppppp!!!!

Answer:

The answer for this question is 50k N.m

Answer:

Answer to An object moves clockwise around a circle centered at the origin with radius 6 m beginning at ... 6 M Beginning At The Point (0,6) B. Find A Position Function R That Describes The Motion If It Occurs With Speed E T A. R(t)= S The Motion Of The Object Moves With A Constant Speed, Completing 1 Lap Every 12 S.

Explanation:

Answer:

The battery is charging and has a current of 2Amps passing through.

Explanation:

Given;

EMF of the battery, E = 12 V

internal resistance, r = 0.5 ohms

terminal voltage of the battery, ΔV = 13 volts

When the terminal voltage is greater than the EMF of the battery, the battery is being charged, allowing currents to pass in a reverse direction.

ΔV = E - Ir

ΔV - E = -Ir

13 - 12 = -0.5I

1 = -0.5I

I = 1 / -0.5

I = -2 A

The negative sign indicates the reverse direction of the current.

Therefore, the battery is charging and has a current of 2Amps passing through.

Answer:

speed = 0.9 mm/s

Explanation:

time, t = 40 s

initial angular speed, wo = 0 rad/s

final frequency, f = 1/1.03 rps = 0.97 rps

final angular speed, w = 2 x 3.14 x 0.97 = 6.1 rad/s

time, t = 40 s

distance, r = 5.9 mm

The angular acceleration is given y the first equation of motion.

[tex]w =wo + \alpha t\\6.1 = 0 +\alpha \times 40\\\alpha = 0.1525 rad/s^{2}[/tex]

The linear velocity is

[tex]v =5.9\times 10^{-3}\times 0.1525 = 9\times 10^{-4} m/s[/tex]

speed, v = 0.9 mm/s

Answer:

13.09 s

Explanation:

From the question given above, the following data were obtained:

Power (P) = 275 W

Work (W) = 3600 J

Time (t) =?

Power is defined as the rate at which work is done. Mathematically, it can be expressed:

Power (P) = Work (W) / time (t)

P = W/t

With the above formula, we can obtain the time taken for the swimmer to accomplish the work. This can be obtained as follow:

Power (P) = 275 W

Work (W) = 3600 J

Time (t) =?

P = W/t

275 = 3600/t

Cross multiply

275 × t = 3600

Divide both side by 275

t = 3600 / 275

t = 13.09 s

Thus, it will take the swimmer 13.09 s to accomplish the work.

Answer:

An example of positive velocity is throwing a ball upwards

An example of downward vertical velocity is when an object is dropped, for example a ball dropped from a height

Explanation:

In a vertical movement the acceleration is always downwards, therefore negative since it is created by the attraction of the Earth on the body.

An example of positive velocity is throwing a ball upwards

An example of downward vertical velocity is when an object is dropped, for example a ball dropped from a height

Answer:

2.2 s

Explanation:

Using the equation for the period of a physical pendulum, T = 2π√(I/mgh) where I = moment of inertia of leg about perpendicular axis at one point =  mL²/3 where m = mass of man = 67 kg and L = height of man = 1.83 m, g = acceleration due to gravity = 9.8 m/s² and h = distance of leg from center of gravity of man = L/2 (center of gravity of a cylinder)

So, T = 2π√(I/mgh)

T = 2π√(mL²/3 /mgL/2)

T = 2π√(2L/3g)

substituting the values of the variables into the equation, we have

T = 2π√(2L/3g)

T = 2π√(2 × 1.83 m/(3 × 9.8 m/s² ))

T = 2π√(3.66 m/(29.4 m/s² ))

T = 2π√(0.1245 s² ))

T = 2π(0.353 s)

T = 2.22 s

T ≅ 2.2 s

So, the period of the man's leg is 2.2 s

SOLVED DOWN BELOW

Explanation:

In series the same current goes thru both resistors, equiv resistance is 200 ohms, then using ohms law

I = 25/200

I= .125 amps or 125 ma

__________

R= r1 * r2 / r1 +r2

R= 100 * 100 / 100 + 100

R= 10000 / 200

R= 50 ohms

Answer:

2.00x 10 14th Hz

Explanation:

Answer:

2.99 x 10^14 Hz

Explanation:

E photon= hf (you have to solve for f)

f= E photon/h

f= 1.98 x 10^-19 J / 6.63 x 10^-34 J x s

f=2.99 x 10^14 Hz

Answer: The mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

Explanation:

Given: Length = 50.0 cm (1 cm = 0.01 m) = 0.50 m

[tex]N_{1}[/tex] = 6750

[tex]N_{2}[/tex] = 15

Radius = [tex]\frac{0.120 cm}{2} = 0.6 cm = 6 \times 10^{-4} m[/tex]

As inner of a solenoid resembles the shape of a circle. So, its area is calculated as follows.

[tex]Area = \pi \times r^{2} = \pi \times (6 \times 10^{-4})^{2}[/tex]

Formula used to calculate mutual conductance of two solenoids is as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}[/tex]

where,

M = mutual conductance

A = area

[tex]\mu_{o}[/tex] = relative permeability = [tex]4 \pi \times 10^{-7} Tm/A[/tex]

[tex]N_{1}[/tex] = no. of coils in outer solenoid

[tex]N_{2}[/tex] = no. of coils in inner solenoid

l = length

Substitute the values into above formula as follows.

[tex]M = \frac{\mu_{o} \times A \times N_{1} \times N_{2}}{l}\\= \frac{4 \pi \times 10^{-7} Tm/A \times \pi (6 \times 10^{-4})^{2} \times 6750 \times 15}{0.5 m}\\= 2.88 \times 10^{-7} H[/tex]

Thus, we can conclude that the mutual inductance of these solenoids is [tex]2.88 \times 10^{-7} H[/tex].

Answer: 10 J

Explanation:

Trust ;)

Answer:

B. carry a single circuit and are placed in individual cases.

Explanation:

An electric circuit can be defined as an interconnection of electrical components which creates a path for the flow of electric charge (electrons) due to a driving voltage.

Generally, an electric circuit consists of electrical components such as resistors, capacitors, battery, transistors, switches, inductors, etc.

Similarly, an integrated circuit (IC) also referred to as microchip can be defined as a semiconductor-based electronic component that comprises of many other tiny electronic components such as capacitors, resistors, transistors, and inductors.

Integrated circuits (ICs) are often used in virtually all modern electronic devices to carry out specific tasks or functions such as amplification, timer, oscillation, computer memory, microprocessor, etc.

A wafer can be defined as a thin slice of crystalline semiconductor such as silicon and germanium used typically for the construction of an integrated circuit.

In an integrated circuit, each wafer is cut into sections, which generally comprises of a single circuit that are placed in individual cases.

Additionally, a semiconductor can be defined as a crystalline solid substance that has its conductivity lying between that of a metal and an insulator, due to the effects of temperature or an addition of an impurity.

Answer: B got it right on the test just now

Explanation:

Answer:

the speed in -y

Explanation:

For this exercise we must use the right hand rule. The motion of a positive charge is given by.

Thumb points in the direction of speed

fingers extended in the direction of the magnetic field, + z axis

the palm in the direction of the force, as the charge is negative in the opposite direction of the force, axis + x

therefore the thumb is in the direction - y

the speed in -y

a = (dx / dt)²

Explanation:  Unit of distance is m (metres) and unit of time is s (seconds) speed v is  first derivative of distance x versus time:

  v = dx / dt, unit is m/s.    Acceleration is second derivative of

 speed versus time  a = (dx / dt)² = (dv/dt) , unit is m/s²

Answer:

Explanation:

Acceleration is derived unit because it has two fundamental units involved i.e. meter and second square.

Answer:

We should not try to park the car because its rest length is greater than the space available.

The car seems to be approximately equal to the friend (L = 3.16 m). Due to this reason he is sure to park.

Explanation:

We should not try to park the car because its rest length is greater than the space available.

The friend is sure about parking because the car appears short in length to him. For this, we will solve Einstein's length contraction formula from theory of relativity:

[tex]L = L_o\sqrt{1-\frac{v^2}{c^2}}[/tex]

where,

L = Relative length observed by friend = ?

L₀ = rest length = 6 m

v = relative speed = 85% of speed of light = 0.85c

Therefore,

[tex]L = (6\ m)\sqrt{1-\frac{(0.85c)^2}{c^2}}[/tex]

L = 3.16 m

Hence, the car seems to be approximately equal to the friend. Due to this reason he is sure to park.

Answer:

The sensitivity of the device = 1.234 Hz per km

Explanation:

Given  

Frequency (f) = 10 gHz

Speed of the car = 120 Km/h

As per the doppler’s effect

V = (change in frequency /frequency) *(c/2)

Substituting the given values, we get –  

Change in frequency = {(2*10^9*120)/(3*10^8)} * (1000/3600)

Change in frequency =  37.03 Hz

b) speed of light = wavelength * frequency

3*10^8 = wavelength * 10*10^9

Wavelength = 0.03 m

Sensitivity = change in frequency /wavelength = 37.03/0.03 = 1234 Hz/m

1.234 Hz per km

a particle of violet light has exactly the same energy as a particle of red light

The elevator accelerates upward at an acceleration, then the magnitude of the force is 148.84 N.

The force is the action of push or pull which makes an object to move or stop.

Given the mass of child m =13.9 kg, acceleration a =0.898 m/s², then the force will be given by

F = m(g-a)

F = 13.9 x (9.81 - (-0.898))

F = 148.84 N

Thus, the magnitude of the force is  148.84 N.

Learn more about force.

https://brainly.com/question/13191643

#SPJ2

Answer:

Points perpendicularly toward the line of charge and decreases in strength at larger distances from the line charge

Explanation:

The electric field for a uniform line of charge is given by E = λ/2πε₀r where λ = charge density and r = distance from line of charge.

If λ is negative, E is negative so it points in the negative direction towards the line of charge.

Also, since for negative charges, electric field lines end up in them, the electric field for an infinitely long negative line of charge points towards the charge perpendicular to it.

Also as r increases, E decreases since E ∝ 1/r

So, the electric field decreases at larger distances from the line of charge.

So, the electric field of a negative infinite line of charge Points perpendicularly toward the line of charge and decreases in strength at larger distances from the line charge.

Answer:

[tex](x \times 1) = (400 \times 2.5) \\ x = 1000 \: newtons[/tex]

[tex]y = 0[/tex]

Answer:

If we convert a circuit into a current source with parallel load it is called source transformation

Answer: hello your question is incomplete attached below is the complete question

answer :  1/2 KD^2  ( option A )

Explanation:

P.E ( potential energy ) = mgd

In case 1 P.E = 0   i.e. mgd = 0  

Given that in case 2 the Mass M had moved through the Distance D by the compression of the spring

The potential energy of the M in case 2

= P.E of M at rest + P.E of the spring

= 0 + 1/2 KD^2

Answer:

Y = 5.03 x 10⁻³ m = 5.03 mm

Explanation:

Using Young's Double-slit formula:

[tex]Y = \frac{\lambda L}{d}[/tex]

where,

Y = Fringe Spacing = Width of bright fringe = ?

λ =  wavelength = 633 nm = 6.33 x 10⁻⁷ m

L = Screen distance = 3.1 m

d = slit width = 0.39 mm = 3.9 x 10⁻⁴ m

Therefore,

[tex]Y = \frac{(6.33\ x\ 10^{-7}\ m)(3.1\ m)}{3.9\ x\ 10^{-4}\ m}[/tex]

Y = 5.03 x 10⁻³ m = 5.03 mm

Answer: The correct statements are:

Explanation:

Solid state: In this state, the molecules are closely packed and cannot move freely from one place to another that means no space between them and the intermolecular force of attraction between the molecules are strong.

In solid substance, the particles are very close to each other due to this the intermolecular forces of attraction are strongest.

The key point about solid are:

Answer:

the number of electrons should equal to the the number of protons in a neutral atom

if there is a inequality between the numbers it means the atom has a + or - charge

Answer:

Photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. ... During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.

Explanation:

thank me later

Answer:

Explanation: