has anyone done this???i need the last questions for 1 and 2

Answer:

q = 1

Explanation:

Given that,

No. of electrons = -12

No. of protons = 13

We need to find the net charge on the balloon. We know that net charge is equal to the sum of proton and the electrons such that,

Net charge = No. of electrons + no. of protons

= -12 + 13

= 1

So, the net charge is equal to 1.

Answer:

The main reason for this is the engineering and technology driven building construction in Chile than in Haiti

Explanation:

The main reason for this is the engineering and technology driven building construction in Chile than in Haiti. Most of the buildings in Haiti do not fit in the building byelaws norms as most of them were constructed in a short period of time with less engineering and at cheaper rate. While building in Chile were built adhering to the building codes and byelaws.

The base of the building is Chile were separated from each other using the “base isolation” technology and the were also more flexible as compared to the buildings in Haiti.  

The skyscrapers in Chile were constructed in a way that they can float on the arrangements of ball bearings and padded cylinders

Answer:

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

Explanation:

In this exercise it is indicated that Jack pushes a car, it is desired that Jill pushes the car so that the speed is constant

take as positive the direction of Jack's thrust

             F_jack - F_jill = 0

              F_jill = F_jack

therefore the push of the two must be equal and Jill's push must have the opposite direction to Jack's push.

The correct answer is NONE the two forces must be equal and of opposite direction, the closest answer is D

Answer:

gravity...................

Answer:

Hope it help you

Answer:

Given that - R = 6 ohm

V = 3 volt

n = ?

so by ohms law , V = I X R

I = V \ R = 3 \ 6 = 0.5 A

we know that I = Q / T here t is 1 sec

Q = I X T = 0.5 X 1 = 0.5 C

By the law of quantization ,

Q = n x e

n = Q / e = 0.5 / 1.6 x 10 ^-19

n = 0.3125 x 10^19

hoped so u got the answer mark me as brainellist :)

Answer:

0.5/1.6×10^-19

Explanation:

formula for current is v

I R

3/6=0.5

charge if found by the product of current and time which is one second

0.5×1 =0.5

deficiency of n=no of charges×charge of electrons

0.5/1.6×10^-19

Answer: 6V

Explanation:

Answer:

(a) Luna

(b) Luna

Explanation:

(b)

The final speed can be found by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration

s = distance covered

vf = final speed

vi = initial speed

For Angela:

a = 2 m/s²

s = 30 m

vi = 4 m/s

vf = v_fa

therefore,

[tex]2(2\ m/s^2)(30\ m) = (v_{fa})^2 - (4\ m/s)^2\\v_{fa}^2 = 120 m^2/s^2 + 16\ m^2/s^2\\v_{fa} = 11.66\ m/s\\[/tex]

For Luna:

a = 3 m/s²

s = 30 m

vi = 3 m/s

vf = v_fl

therefore,

[tex]2(3\ m/s^2)(30\ m) = (v_{fa})^2 - (3\ m/s)^2\\v_{fa}^2 = 180 m^2/s^2 + 9\ m^2/s^2\\v_{fa} = 13.74\ m/s\\[/tex]

Therefore, Luna will be running faster at the end of the race.

(b)

To calculate the time of completion we will use the first equation of motion:

[tex]v_f = v_i + at[/tex]

FOR ANGELA:

[tex]11.66\ m/s = 4\ m/s + (2\ m/s^2)t_a\\t_a = \frac{7.66\ m/s}{2\ m/s^2}\\\\t_a = 3.83\ s[/tex]

FOR LUNA:

[tex]13.74\ m/s = 3\ m/s + (3\ m/s^2)t_l\\t_l = \frac{10.74\ m/s}{3\ m/s^2}\\\\t_l = 3.58\ s[/tex]

Hence, LUNA finishes the race first.

Answer:

about 2.7liters for women and 3.7liters for men

Explanation:

Answer:

1 ohm

Explanation:

since there are two identical resistors, one resistor will be

R = [tex]\frac{4}{2}[/tex] =2ohm [ proven as in series [tex]R_{e} = 2 + 2 = 4ohm[/tex] ]

to calculate the equivalent resistance when in parallel:

[tex]\frac{1}{R_{e} } = \frac{1}{R_{1} } + \frac{1}{R_{2}}[/tex]

so,

[tex]\frac{1}{R_{e} } = \frac{1}{2} + \frac{1}{2}[/tex]

[tex]R_{e} = 1ohm[/tex]

Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

In a parallel circuit, voltage is thee same across each component in the circuit. The sum of the currents through each path is equal to the current from the source. However, the resistance cannot be added directly. It is calculated as:

1/Rt = 1/R1 + 1/R2 + 1/R3 1/Rt = 1/6.8 + 1/9.0 + 1/15

Rt = 3.08 ohms.

When resistors are connected in parallel, the equivalent resistance R will be less than the least resistance.

1/R = 1/R1 + 1/R2 + 1/R3 + 1/R4 + 1/R5

Since the 5 resistors are 10 ohms each, substitute them in to the formula

1/R = 1/10 + 1/10 +1/10 + 1/10 + 1/10

The LCM = 10

1/R = 5/10

Reciprocate both sides

R = 10/5 = 2 ohms

Therefore, Two identical resistors connected in series have an equivalent resistance of 4 ohms. The same two resistors, when connected in parallel, have an equivalent resistance of 1 ohm.

Learn more about equivalent resistance on:

https://brainly.com/question/13606415

#SPJ5

Answer:

The objectives of the tourist for visiting Nepal are .

hope it is helpful to you ☺️

Answer:

Radio waves can be modified by their amplitude or frequency in order to transmit sound or data.

Explanation:

Hope this helped!!!

Answer:

Friction can be minimized by using lubricants like oil and grease and by using ball bearing between machine parts. A substance that is introduced between two surfaces in contact, to reduce friction, is called a lubricant. Fluid friction can be minimized by giving suitable shapes to the objects moving in the fluids.

Explanation:

hope it helps

Answer:

A. respiration.

Explanation:

Cellular respiration can be defined as a series of metabolic reactions that typically occur in cells so as to produce energy in the form of adenosine triphosphate (ATP). During cellular respiration, high energy intermediates are created that can then be oxidized to make adenosine triphosphate (ATP). Therefore, the intermediary products are produced at the glycolysis and citric acid cycle stage.

Additionally, mitochondria provides all the energy required in the cell by transforming energy forms through series of chemical reactions; breaking down of glucose into Adenosine Triphosphate (ATP) used for providing energy for cellular activities in the body of living organisms.

Basically, oxygen goes into the body of a living organism such as plants, humans and animals when they breathe while glucose is absorbed by the body when they eat.

Hence, the conversion of sugar to energy in the presence of oxygen is respiration.

Answer:

some symptoms can be lack of energy, and dizziness.

Explanation:

Answer: 0.25 m/s

Explanation:  Speed = wavelengt · frequency  

v = λf   and frequency is 1/period  f = 1/T

Then v = λ/T = 5 m / 20 s = 0.25 m/s

Answer:

x = 0.78 m = 78 cm

Explanation:

Applying the law of conservation of energy to the spring-mass system, we can write the following equation:

[tex]Kinetic\ Energy\ at\ Mean\ Position= Potential\ Energy\ at\ extreme\ position\\\frac{1}{2}mv^2 = \frac{1}{2}kx^2\\\\x^2 = \frac{mv^2}{k}\\\\x = \sqrt{\frac{mv^2}{k} }[/tex]

where,

x = maximum displacement = ?

m = mass = 3.6 kg

v = speed at mean position = 5.2 m/s

k = spring constant = 160 N/m

Therefore,

[tex]x = \sqrt{\frac{(3.6\ kg)(5.2\ m/s)^2}{160\ N/m} }\\\\[/tex]

x = 0.78 m = 78 cm

C. Light rays are bent by the water in the glass.

Explanation:

The light defracts as is it leaves the medium of air and enters the medium of the water/glass.

The link below is to a short video that explains this concept very well.

https://youtu.be/Iq1a_KJTWJ8

Explanation:

Mitochondria are essential parts of many eukaryotes, but they are useless without oxygen. Therefore, chloroplasts are extremely important. They produce breathable air for life. Root hairs are seen to not have chloroplasts as their job is to collect water and nutrients.

Answer:

F = 0.0112 N

Explanation:

Given that,

Masses, [tex]m_1=m_2=6500\ kg[/tex]

The distance between masses, d = 0.5 m

We need to find the gravitational force between two large trucks. The formula for the gravitational forces is given by :

[tex]F=G\dfrac{m^2}{r^2}\\\\F=6.67\times 10^{-11}\times \dfrac{6500^2}{(0.5)^2}\\\\F=0.0112\ N[/tex]

So, the required force between masses is equal to 0.0112 N.

Answer:

the answer is B. it's too easy

Answer:

larger

Explanation:

just trust me

The smaller the mass of an object, the smaller its inertia, because the inertia of any object is directly proportional to the mass of the object

The ability of an object to resist changes in motion is known as inertia. The amount of inertia is directly related to an object's mass; in fact, as we frequently observe, the heavier an object is, the harder it is to change its direction of motion.

A straightforward illustration: While it is relatively simple to stop a tennis ball that has been thrown in our direction, we are aware that it is more difficult to stop a large truck that is moving in the same direction at the same speed. This is because the truck has a much higher mass than the tennis ball and a higher moment of inertia. As a result, inertia rises as mass does.

Since the inertia of any object is directly proportional to its mass, the smaller its mass, the less inertia it will have.

Learn more about Inertia from here

https://brainly.com/question/1358512

#SPJ5

Answer:

True Edg2020

Explanation:

Answer: true

Explanation:

because I say so :P

Answer:

La velocidad del sistema bala-bloque es 5 metros por segundo.

Explanation:

El enunciado tiene una omisión gramatical. La forma correcta es la siguiente:

Una bala de 0.8 kilogramos de masa se mueve horizontalmente con una velocidad de 30 metros por segundo y se introduce en un bloque de 4 kilogramos, inicialmente en reposo. ¿Cuál es la velocidad de la bala y el bloque después del impacto?

Esta situación es un caso clásico de colisión enteramente inelástica, en donde el sistema bala-bloque no tiene influencia de fuerzas externas, entonces la situación queda descrita por la siguiente ecuación:

[tex]m_{b}\cdot v_{b,o} = (m_{b}+m_{B})\cdot v[/tex] (1)

Donde:

[tex]m_{b}[/tex] - Masa de la bala, en kilogramos.

[tex]v_{b,o}[/tex] - Velocidad inicial de la bala, en metros por segundo.

[tex]m_{B}[/tex] - Masa del bloque, en kilogramos.

[tex]v[/tex] - Velocidad del sistema bala-bloque, en metros por segundo.

Si sabemos que [tex]v_{b,o} = 30\,\frac{m}{s}[/tex], [tex]m_{b} = 0.8\,kg[/tex] y [tex]m_{B} = 4\,kg[/tex], entonces la velocidad del sistema masa-bloque es:

[tex]v = \frac{m_{b}}{m_{b}+m_{B}}\cdot v_{b,o}[/tex]

[tex]v = 5\,\frac{m}{s}[/tex]

La velocidad del sistema bala-bloque es 5 metros por segundo.

Answer:

1) x rays

Explanation:

Honestly Gamma rays has the Highest frequency, but in your options, gamma rays is not among, so x rays has the highest frequency among your options.

by Manshow

Answer:

The answer is (X-rays)

number 1

Answer:

Explanation:

In this case, a dark shirt or blanket would be a heat conductor as well as metal would be, too

Answer:

Chemical energy to heat energy to kinetic energy to electrical energy

Answer: the answer is c (think bc im on that too)

Explanation:

The interference is a  type of wave interaction shown in the photo. Option A is correct.

The result of two or more wave trains flowing in opposite directions on a crossing or coinciding pathways. This phenomenon is known as the interference of waves.

The effect is the sum of the individual wave amplitudes at each site where more than one wave is present.

When two wave pulses are traveling along a string toward each other. They meet and the phenomenon is occur known as interference.

The interference is a  type of wave interaction shown in the photo

Hence option A is correct.

To learn more about the interference of waves refer to the link;

brainly.com/question/16098226

Answer:

F = 4117.64

Explanation:

First, we will calculate the acceleration of the hand, by using the third equation of motion:

[tex]2as = v_f^2 - v_i^2\\[/tex]

where,

a = acceleration = ?

s = distance covered = compression = 8.5 cm = 0.085 m

vf = final speed = 0 m/s

vi = iniial speed = 10 m/s

Therefore,

[tex]2a(0.085\ m) = (0\ m/s)^2-(10\ m/s)^2\\a = - 588.23\ m/s^2[/tex]

negative sign hows deceleration.

Now, we will calculate the force exerted by the hand:

[tex]F = ma = (7\ kg)(588.23\ m/s^2)\\[/tex]

F = 4117.64 N