Answer:
the best option is 4 as it have the highest present value
Explanation:
The computation is shown below:
For option 1
PV = $1,000,000
For option 2
PV = $420,000 + $80,000 × PVIFA (8% , 10)
= $420,000 + $80,000 × 6.710
= $956,800
For option 3
PV = $135,000 + $135,000 × PVIFA (8% , 9)
= $135,000 + $135,000 × 6.247
= $978,345
For option 4
PV = $1,500,000 × PVIF (8% , 5)
= $1,500,000 × 0.681
= $1,021,500
So the best option is 4 as it have the highest present value
A first saving account pays 5% compounded annually. A second saving account pays 5% compounded continuously. Which of the two investments is better in the long term?
During your presentation, you realize that you are talking too fast. This is a
problem of
O Content challenges
Organizational challenges
Presentation skills challenges
Answer:
Presentation skills challenges
Explanation:
Presentation can be defined as an act of talking or speaking formally to an audience in order to explain an idea, piece of work, project, and product with the aid of multimedia resources or samples.
Basically, any speaker who wish to create an effective presentation should endeavor to interact frequently with the audience by holding a conversation.
This ultimately implies that, to create an effective presentation, speakers are saddled with the responsibility of interacting more often with the audience by taking questions, making a joke, getting them to repeat informations loud at intervals etc.
If during your presentation, you realize that you are talking too fast. This is a problem of presentation skills challenges.
Hence, speakers are advised to be passionate and show enthusiasm during their presentation because it would enhance their ability to speak confidently and as such leading to an engaging presentation.
Your grandfather has offered you a choice of one of the three following alternatives: $14,000 now; $7,250 a year for ten years; or $96,000 at the end of ten years. Use Appendix B and Appendix D for an approximate answer, but calculate your final answer using the formula and financial calculator methods. a-1. Assuming you could earn 6 percent annually, compute the present value of each alternative:
Answer:
Hi how are you doing today Jasmine
Why did Steve and Vic focused on smaller cities rather than Silicon Valley
Answer:
focusing on smaller cities rather than areas like silicon valley a good strategy, why? Larger cities have a lot more competition and a great way to help others in smaller cities with money and jobs. They can have their businesses all over the world and be able to give success to everyone.
Explanation:
there is your answer
Sweeten Company had no jobs in progress at the beginning of March and no beginning inventories. It started only two jobs during March—Job P and Job Q. Job P was completed and sold by the end of the March and Job Q was incomplete at the end of the March. The company uses a plantwide predetermined overhead rate based on direct labor-hours. The following additional information is available for the company as a whole and for Jobs P and Q (all data and questions relate to the month of March. What is company's predetermined overhead rate? How much manufacture overhead was applied to Job P and Job Q? What is the direct labor hourly wage rate? If Job P includes 20 units, what is its unit product cost? What is the total amount of manufacture cost assigned to Job Q as of the end of march (including applied overhead)? Assume the ending raw material inventory is $1,000 and the company does not use and indirect materials. Prepare then journal entries to record raw materials purchases and the issuance of direct materials for use in production. Assume that the company does not use any indirect labor. Prepare the journal entry to record the direct labor costs added to production. Prepare the journal entry to apply manufacture overhead costs to production. Assume the ending raw material inventory is $1,000 and the company does not use any indirect materials. Prepare a schedule of cost of goods manufactured. Prepare the journal entry to transfer costs from Work in Process to Finished Goods. Prepare a completed work in process T-account including the beginning and ending balance and all debits and credits posted to the account. Prepare a schedule of cost of goods sold. Prepare the journal entry to transfer costs from Finished Goods to Cost of Goods Sold. What is the amount of underapplied or overapplied overhead. Prepare the journal entry to close the amount of underapplied or overapplied overhead to Cost of Goods Sold. Assume that job P includes 20 units that each sell for $3,000 and that the companys selling and administrative expense is March were $14,000. Prepare an absorption costing income statement for March.
Estimated total fixed manufacture over head $10,000
Estimated variable manufacture overhead per direct labor hour $1.00
Estimated total direct labour hours to be worked 2,000
Total Manufacturing overhead costs incurred $12,500
Job P /Job Q
Direct Material $13,000 /$8,000
Direct Labor Cost $21,000 /$7,500
Actual Direct Labor-hours worked 1,400 /500
Answer:
Sweeten Company
1. Predetermined overhead rate is:
= $6.00 per DLH
2. Manufacturing overhead applied to Job P and Job Q:
Job P Job Q
= $8,400 $3,000
3. The direct labor hourly wage rate:
= $15 per DLH
4. If Job P includes 20 units, its unit product cost is:
= $2,120
5. The total amount of manufacturing cost assigned to Job Q as of the end of March (including applied overhead):
= $3,000
6. Assuming the ending Raw Material Inventory = $1,000, Journal Entries to record Raw Materials Purchases and the Issuance of Direct Materials for use in production:
Debit Raw Materials Inventory $22,000
Credit Accounts Payable/Cash $22,000
To record the purchase of raw materials.
Debit Work in Process $21,000
(Job P $13,000
Job Q $8,000)
Credit Raw Materials Inventory $21,000
To record the issuance of raw materials to Work in Process.
7. Assuming no indirect labor, Journal Entry to record the direct labor costs added to production:
Debit Job P $21,000
Debit Job Q $7,500
Credit Factory Wages $28,500
To record direct labor costs to production.
8. Journal Entry to apply manufacturing overhead costs to production:
Debit Job P $8,400
Debit Job Q $3,000
Credit Manufacturing overhead $11,400
To apply manufacturing overhead costs to production.
9. Assuming the ending raw material inventory is $1,000, A Schedule of Cost of Goods Manufactured:
Job P
Direct Material $13,000
Direct Labor Cost 21,000
Manufacturing Overhead applied 8,400
Total cost of goods manufactured $42,400
10. Journal entry to transfer costs from Work in Process to Finished Goods:
Debit Finished Goods Inventory $42,400
Credit Work in Process: Job P $42,400
To transfer costs from WIP to Finished Goods.
11. Work in Process T-account with beginning and ending balance
Work in Process
Account Titles Debit Credit
Beginning balance $0
Direct Material $21,000
Direct Labor Cost 28,500
Manufacturing overhead 11,400
Finished Goods Inventory $42,400
Balance 18,500
Totals $60,900 $60,900
12. A Schedule of Cost of Goods Sold:
Unit of Goods Sold = 20
Unit cost = $2,120
Cost of goods sold = $42,400
13. Journal Entry to transfer costs from Finished Goods to Cost of Goods Sold:
Debit Cost of Goods Sold $42,400
Credit Finished Goods Sold $42,400
To transfer costs from Finished Goods to Cost of Goods Sold.
14. The amount of underapplied or overapplied overhead:
= $1,100
15. Journal Entry to close the amount of underapplied or overapplied overhead to Cost of Goods Sold:
Debit Cost of Goods Sold $1,110
Credit Manufacturing Overhead $1,110
To close the amount of underapplied overhead to Cost of Goods Sold.
16. Assuming Job P includes 20 units that each sell for $3,000 and that the company's selling and administrative expense is March were $14,000, Absorption Costing Income Statement for March:
Sales Revenue $60,000
Cost of Goods Sold 43,500
Gross profit $16,500
Selling and
Administrative
Expense 14,000
Net Income $2,500
Explanation:
a) Data and Calculations:
Predetermined overhead rate is based on direct labor hours
Estimated total fixed manufacturing overhead $10,000
Estimated variable manufacturing overhead per direct labor hour $1.00
Estimated total direct labour hours to be worked 2,000
Total Manufacturing overhead costs incurred $12,500
Job P Job Q Total Cost
Direct Material $13,000 $8,000 $21,000
Direct Labor Cost $21,000 $7,500 28,500
Actual Direct Labor-hours worked 1,400 500
Applied manufacturing overhead 1,400 * $6 500 * $6
= $8,400 $3,000 $11,400
Total $60,900
Predetermined overhead rate = $10,00/2,000 = $5 + $1 = $6
Direct labor wage rate = $21,000/1,400 = $15 per DLH
Unit Cost of Job P if 20 units:
Direct Material $13,000
Direct Labor Cost $21,000
Manufacturing overhead $8,400
Total costs = $42,400
Unit cost = $42,400/20 = $2,120
Raw materials used in production = $21,000
Ending raw materials 1,000
Purchase of raw materials $22,000
Underapplied or Overapplied Overhead:
Actual manufacturing overhead incurred = $12,500
Manufacturing overhead applied 11,400
Underapplied overhead = $1,100
Sales Revenue = $3,000 * 20 = $60,000
Peterson Manufacturing recently reported EBITDA of $18.75 million and $4.5 million of net income. It has $5 million of interest expense and its corporate tax rate is 40%. What was its depreciation and amortization expense (in millions of dollars)
Answer:
Peterson Manufacturing
Its depreciation and amortization expense (in millions of dollars) was:
= $6.25 million
Explanation:
a) Data and Calculations:
EBITDA = $18.75 million
Depreciation and amortization expense = $6.25 million
Earnings before Interest = $12.50 million
Interest expense = $5.00 million
Earnings before taxes = $7.50 million
Corporate taxes (40%) = $3.00 million
Net Income = $4.50 million
Earnings before taxes = Net income/1-tax rate
= $4.5 million/60% = $7.5 million
Corporate taxes = 40% of $7.5 million = $3.0 million
Earnings before interest = Interest expense plus earnings before taxes (earnings after interest)
= $5 million + $7.5 million = $12.5 million
Therefore, Depreciation and amortization expense = EBITDA - Earnings before Interest
= $18.75 million - $12.5 million
= $6.25 million
b) EBITDA = Earnings before Interest, Taxes, and Depreciation and Amortization.
Duffy-Deno (2003) estimated that the demand function for broadband service was Qs = 15.6p−0.563 for small firms and Ql = 16.0p−0.296 for larger ones. These two demand functions cross. What can you say about the elasticities of demand on the two demand curves at the point where they cross? What can you say about the elasticities of demand more generally (at other prices)? (Hint: The question about the crossing point may be a red herring. Explain why.)
Answer:
At point of intersection ; p = $0.90 The elasticities of the demand functions remain the same because they are independent functions during the entire demand curveExplanation:
First we Determine the elasticity of demand for both Large firm and smaller firms
For Larger firms
∈1 = -0.296
For smaller firms
∈s = -0.563
At the point of crossing Determine the price at the point of crossing of the demand curves
Qs = Ql
the price at intersection ( P ) = $0.90
what can be said about the elasticities of demand is that the elasticities of the demand functions remain the same because they are independent during the entire demand curve
Extended warranties
Carnes Electronics sells consumer electronics that carry a 90-day manufacturer’s warranty. At the time of purchase, customers are offered the opportunity to also buy a two-year extended warranty for an additional charge. During the year, Carnes received $412,000 for these extended warranties (approximately evenly throughout the year).
Required:
1.Does this situation represent a loss contingency? Why or why not? How should it be accounted for?
2.Prepare journal entries that summarize sales of the extended warranties (assume all credit sales) and any aspects of the warranty that should be recorded during the year.
Solution :
1. This is not a loss contingency as extended warranty is being priced as well sold separately from warranted products and therefore constitutes the separate sales transaction.
2.
Event General Journal Debit Credit
1 Cash $412,000
Unearned revenue -- extended warranties $412,000
2. Unearned revenue -- extended warranties $ 57937.50
Revenue - Extended Warranties $ 57937.50
Working :
The manufacturer provided 90 days which is 3 months of free warranty. Thus a customer who is purchasing the extended warranty is for 09 months.
Now amount received by Carnes Electronics for the extended warranty in one year = $412,000
So, [tex]$\$ 412,000 \times \frac{9}{12}= \$309000$[/tex] of sales.
The warranty is for two years and so 4.5 months in one year.
Therefore the revenue earned on the extended warranty is :
[tex]$\$309000 \times \frac{4.5 \text{ months}}{24 \text{ months}}$[/tex]
= $ 57937.50
Applying the research findings to a marketing strategy plan is the ______ step in the marketing research process. Multiple choice question.
Answer:
Fifth.
Explanation:
Market research can be defined as a strategic technique which typically involves the process of identifying, acquiring and analyzing informations about a business. It involves the use of product test, surveys, questionnaire, focus groups, interviews, etc.
Secondary market research can be defined as a method designed to determine the demographics of a particular target market.
Applying the research findings to a marketing strategy plan is the fifth step in the marketing research process.
Data related to the acquisition of timber rights and intangible assets during the current year ended December 31 are as follows:
Timber rights on a tract of land were purchased for $1,600,000 on February 22. The stand of timber is estimated at 5,000,000 board feet. During the current year, 1,100,000 board feet of timber were cut and sold.
On December 31, the company determined that $3,750,000 of goodwill was impaired.
Governmental and legal costs of $6,600,000 were incurred on April 3 in obtaining a patent with an estimated economic life of 12 years. Amortization is to be for three-fourths of a year.
Required:
1. Determine the amount of the amortization, depletion, or impairment for the current year for each of the foregoing items. Do not round your intermediate calculations.
Item Impairment, Amortization or Depletion Expense
a. $
b. $
c. $
Hide
2. Journalize the adjusting entries required to record the amortization, depletion, or impairment for each item.
Solution:
Given :
Timber rights were purchased for = $1,600,000
The stand of the timber is = 5,000,000 board feet
Goodwill impaired by the company = $3,750,000
Timber cut and sold during current year = 1,100,000 board feet
Government legal cost = $6,600,000
Therefore the amount of amortization , depletion and the impairment of the current year for each foregoing item are :
1.
Item Impairment, Amortization or the depletion
a). $ 352,000
b). $ 3,750,000
c). $ 412,500
2. Jornalizing the entries that required to record the depletion, amortization or the impairment of each of the items are :
a). The depletion expense = $ 352,000
Accumulated expense = $ 352,000
b). Loss from the impaired goodwill = $3,750,000
The goodwill = $3,750,000
c). Amortization expenses patent= $412500
Patent = $412500
On July 1, Shady Creek Resort borrowed $310,000 cash by signing a 10-year, 11% installment note requiring equal payments each June 30 of $52,639. What amount of interest expense will be included in the first annual payment
Answer:
$34,100
Explanation:
The interest on the installment note for the first year is a function of both the face value of the note and interest rate of 11%
Interest expense on the first annual payment=$310,000*11%
Interest expense on the first annual payment=$34,100
The amount principal repayment in respect of the first annual payment is the amount of payment which is $52,639 minus the interest portion of the payment.
The Principal portion of the first payment=$52,639-$34,100=$18,539
Applying the midpoint formula, what is the price elasticity of demand if a drop in the price of energy drinks from $2 to $1 per can leads to an increase in the quantity demanded from 100 million to 150 million cans
Answer:
-0.6
Explanation:
Price elasticity of demand = Δ Change in quantity / Δ Change in price
Price elasticity of demand = [150-100/((150+100)/2)] / [1-2/((1+2)/2)]
Price elasticity of demand = [50/125]/ [-1/1.5]
Price elasticity of demand = 0.4/-0.66666
Price elasticity of demand = -0.6
(Externalities) Complete each of the following sentences: a. Resources for which periodic use can be continued indefinitely are known as ____________ resources. b. Resources that are available only in a fixed amount are ____________ resources. c. The possibility that an open-access resource is used until the net marginal value of additional use equals zero is known as the ____________.
Answer:
a. Renewable resources
b. Exhaustible resources
c. Common pool resources
Explanation:
a. Resources for which periodic use can be continued indefinitely are known as renewable resources. These refer to resources which can be reproduced and available over a period of time
b. Resources that are available only in a fixed amount are exhaustible resources. These refer to resources which are available at fixed quantity.
c. The possibility that an open-access resource is used until the net marginal value of additional use equals zero is known as the Common pool resources. These refer to renewable resources which can be accessible by everyone.
Purpose: Organization design refers to the overall set of elements used to configure an organization. The purpose of this exercise is to give you insights into how managers must make decisions within the context of creating an organization design. Introduction: Whenever a new enterprise is started, the owner must make decisions about how to structure the organization. For example, he or she must decide what functions are required, how those functions will be broken down into individual jobs, how those jobs will be grouped back together into logical departments, and how authority and responsibility will be allocated across positions. Instructions: Assume that you have decided to open a handmade chocolate business in your local community. Your products will be traditional bars and novelty-shaped chocolates, truffles, other chocolate products such as ice cream, and gift baskets and boxes featuring chocolates. You have hired a talented chef and believe that her expertise, coupled with your unique designs and high-quality ingredients, will make your products very popular. You have also inherited enough money to get your business up and running and to cover about one year of living expenses in other words, you do not need to pay yourself a salary). You intend to buy food items including chocolate, cocoa, white chocolate, nuts, and fruit from suppliers who deliver to your area. Your chef will then turn those ingredients into luscious
Answer:
hmm I know with that is the silver kind to you and
Business partners Arnetta and Xavier are designing their new office space and furnishings. They want to communicate success and impress visiting clients, so they choose high-quality hardwood flooring and elegant furniture. Which aspect of nonverbal communication does this illustrate
Answer:
environment.
Explanation:
Analyzing the information in the question, it is correct to say that Arnetta and Xavier are using the aspect of non-verbal communication related to the environment, due to the fact that their goal is to communicate success and impress visiting customers through high quality wooden floors. and elegant furniture, that is, they use physical and psychological aspects combined with the office environment that communicate success.
Environmental non-verbal communication allows to impress people through the design of their environment, and brings significant advantages to companies that use this strategy effectively, as it reinforces the desired communication and creates the expected strategic effect.
Environmental elements that are both fixed and semi-fixed
Gathering the data in the question, it is true to say that Arnetta and Xavier are employing nonverbal signals connected to the environment, as their purpose is to communicate accomplishment and impress prospective customers through high-quality hardwood surfaces.
Environmental communication process allows firms to impress people by the design of their surroundings, and it has enormous benefits for companies who employ it successfully, since it reinforces the intended communication and achieves the desired strategic result.
Learn more:https://brainly.com/question/21063809?referrer=searchResults