Answer:
The force is of the weight 862,4 Newtons.
Explanation:
We have the formula:
w = m * g
Data:
w = weight = ¿?
m = mass = 88 kg
g = gravity = 9,8 m/s
Replacing according formula:
w = 88 kg * 9,8 m/s
Resolving:
w = 862,4 N
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Given that,
Weight of a car, W = 12,000 N
It is parked on a 36° slope.
To find,
The acceleration of the car.
Solution,
Let m be the mass of the car. Using formula for weight of an object.
W = mg
[tex]m=\dfrac{12000}{9.8}\\\\=1224.48\ kg[/tex]
Let a be the acceleration of the car. Using second law of motion as follows :
[tex]a=\dfrac{F_{\text{parallel}}}{m}\\\\=\dfrac{F\sin\theta}{m}\\\\=\dfrac{12000\times \sin(36)}{1224.48}\\\\=5.76\ m/s^2[/tex]
So, the acceleration of the car is [tex]5.76\ m/s^2[/tex].
2. A person lifts 200kg seven times over the course of 11.8s. If they displaced the weight 2.2m up each time, how much power did the person deliver?
Answer:
The person delivered a power of 2,558 Watt
Explanation:
Work and Power
Mechanical work is the amount of energy transferred by a force. It's a scalar quantity, with SI units of joules.
Being the force vector and the displacement vector, the work is calculated as:
[tex]W=\vec F\cdot \vec s[/tex]
If both the force and displacement are parallel, then we can use the equivalent scalar formula:
W=F.s
Power is the amount of energy transferred per unit of time. In the SI, the unit of power is the watt, equivalent to one joule per second.
The power can be calculated as:
[tex]\displaystyle P=\frac {W}{t}[/tex]
Where W is the work and t is the time.
If the person lifts a mass of m=200 Kg, then exerts a force equal to its weight:
F = m.g = 200*9.8 = 1,960
F = 1,960 N
The work done when lifting the weight 7 times by a distance of s=2.2 m is:
W = 7*1,960*2.2=30,184
W = 30,184 J
Finally, the power delivered in t=11.8 seconds is:
[tex]\displaystyle P=\frac {30,184}{11.8}[/tex]
P = 2,558 Watt
The person delivered a power of 2,558 Watt
please help me will mark u brainiest
Answer:
Answer is A :)))))))))
What part of an experiment contains the data tables and graphs
?
Answer: Review your data. ...
Calculate an average for the different trials of your experiment, if appropriate.
Make sure to clearly label all tables and graphs. ...
Place your independent variable on the x-axis of your graph and the dependent variable on the y-axis.
Hope this helps!!
Conclusion When there is a constant unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will _____________________________. When there is an increasing unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will ________________________. When there is a constant unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________. When there is an increasing unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________.
Explanation:
When there is a constant unbalanced force applied in the same direction as the motion, speed will increase and acceleration will remain constant. When there is an increasing unbalanced force applied in the same direction as the motion, speed will increase and acceleration will increase.
According to newton's 2nd law
F = ma
F ∝ a
meaning when F increases , a increases and vice versa
The velocity of a 48.0 g shell leaving a 2.95 kg rifle is 391. m/s. What is the recoil velocity of the rifle?
Hi there!
[tex]\large\boxed{ -6.36m/s}[/tex]
Use the equation:
[tex]v_{2} = -\frac{m_{1}}{m_{2}} v_{1}[/tex]
Where m2 and v2 deal with the larger object, and m1 and v1 with the smaller object. Plug in the given values:
v2 = ?
m1 = 0.048 kg (converted)
m2 = 2.95
v1 = 391
[tex]v_{2} = -\frac{0.048}{2.95} *391[/tex]
[tex]v_{2} = -6.36m/s[/tex]
what is the mass of a vehicle that has 50,000 N and 25M/S/S
Answer:
F = 1250000 N
Explanation:
If you have 50,000 S, by 25 M. It would be calculated to 1,250,000 N.
Mathew throws a ball straight up in the air. it rises for a period of time and then begins to drop. At which points in the balls journey will be gravity be the greatest force acting on the ball
Answer: The greatest force of gravity on the ball will occur at the point when the ball is near to hit the ground ... hope this helps have a good day :P
WILL MARK BRAINLIEST ONCE I KNOW THE RIGHT ANSWER *(AFTER THE FULL TEST)*
Rules:
DO NOT SCAM
DO NOT ANSWER IF YOU DO NOT KNOW
COMMENT RESPECTFULLY
sheila uses a 45N force on her bowling ball across a 15M lane. what work did she do on the bowling ball? show your work.
Answer:
Work=force × distance
=45×15
=675
Explanation:
need thanks and make me brainiest if it helps you
Kiana is wearing a black shirt and shiny necklace. While she is outside at recess her shirt absorbs the light waves and gets very hot in the sun, but her necklace reflects the light waves and small circles of light are seen around the yard. What explains why the light waves behaved differently on her shirt than they did on her necklace?
Answer:
Black bodies are good absorber of light waves from the sun, while shining surfaces are good reflector of the light waves.
Explanation:
Generally, a black surface or material tends to absorb light waves while under the sun, while a shiny surface is a good reflector of the waves. This is because the black material is a good absorber, and also a good emitter.
The shiny necklace can only absorb little light waves from the sun, thus it reflects most of the light waves. The reflection is the reason for the small circles of light seen around the yard.
However, when in a cool environment the black shirt would cools faster (good emitter) than the shiny necklace.
Name and briefly describe the 10 “world climates” or biomes
These are Some climates
Tropical.
Dry.
Temperate.
Continental.
Polar.
And these are some biomes
aquatic, grassland, forest, desert, and tundra,
can any one give me a amazon code i will repay you. plz i am trying to buy my mom somin off amazon
Answer:i have none but good luck also this is a learning site ;-;
Explanation:
Two carts connected by a 0.25 m spring hit a wall, compressing the spring to 0.1 m. The spring constant k is 100 N m . What is the elastic potential energy stored from the spring's compression?
Given that,
Initial position of the spring, x₁ = 0.25 m
Final position of the spring, x₂ = 0.1 m
The spring constant of the spring, k = 100 N/m
To find,
The elastic potential energy stored from the spring's compression.
Solution,
The work done in moving a spring from on position to another is stored in the form of elastic potential energy. It can be given as follows :
[tex]E=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\=\dfrac{1}{2}\times 100\times (0.1^2-0.25^2)\\\\=2.62\ J[/tex]
So, the required energy is 2.62 J.
Answer:
1.125 J
Explanation:
The correct answer is 1.125 J
Water can’t stick to itself. True or false?
Answer:ture
Explanation:
A girl throws a 2 kg rock with a net force of 6 N. What is the acceleration of the rock?
8 m/s2
0.33 m/s
2 3 m/s2
12 m/s2
Answer:
3 m/s2
Explanation:
Took the test
How much momentum does a stationary 5500 kg mass have?
Answer:0
Explanation:
All stationary objects have no momentum they do not have any motion to have momentum you need mass and motion
A 75.0kg diver falls from a 3.00m board into the water. She goes 2.40m into the water before stopping. What is the average force the water exerted on the diver?
Answer:
The potential energy of the diver at the top is equal to the net work needed to be done to stop the diver.
PE = W
mg(h+d) = Fd
Explanation:
which two statement descibe processes most likely to be involved in the formation of sedimentary rock?
Answer:
Erosion
Explanation:
Sedimentary rocks are created from the build up of sediments, such sediments can be found in stuff like soil, other rocks and many more. Erosion is involved in these type of rocks because the byproduct of erosion are sediments.
Answer:
Rivers... and Windstorms....
Explanation:
I just did it a p e x
hello help me pls! i need serious help
Answer:c
Explanation:
What is white noise?
Answer:
white noise is a random signal having equal intensity at different frequencies, giving it a constant power spectral density
Answer:
White noise refers to sounds that mask other sounds that might occur naturally in an environment. If you live in a city, for example, white noise could help block out noises associated with traffic. Specific sounds might be used to help encourage sleep regardless of environmental noises.
What happens to thermal energy when Kinetic energy is Increased/Decreased?
Answer:If kinetic energy increases, so does the thermal energy, and vice versa.
Please brainliest!
A crane used 250,000 Joules of work to move a beam to the top of a building in 20 seconds. How much power did the crane use?
a) 5,000,000 W
b) 5,000 W
c) 50 J
d) 12,500 W
Answer:
12500W
Explanation:
Given parameters:
Work done = 250000J
Time taken = 20s
Unknown:
Power of the crane = ?
Solution:
Power is the defined as the rate at which work is being done;
Mathematically;
Power = [tex]\frac{work done}{time }[/tex]
insert the parameters and solve;
Power = [tex]\frac{250000}{20}[/tex] = 12500W
Will mark the brainliest
A nail of mass ,7.0g is held horizontally and is hit by a hammer of mass 0.25kg moving at 10ms −1. The hammer remains in contact with the nail during and after the blow.
If velocity of nail and hammer immediately after the blow is 9.7ms-1 Calculate the impulse transferred to the nail
Answer:
The impulse transferred to the nail is 0.01 kg*m/s.
Explanation:
The impulse (J) transferred to the nail can be found using the following equation:
[tex] J = \Delta p = p_{f} - p_{i} [/tex]
Where:
[tex]p_{f}[/tex]: is the final momentum
[tex]p_{i}[/tex]: is the initial momentum
The initial momentum is given by:
[tex] p_{i} = m_{1}v_{1_{i}} + m_{2}v_{2_{i}} [/tex]
Where 1 is for the hammer and 2 is for the nail.
Since the hammer is moving down (in the negative direction):
[tex]v_{1_{i}} = -10 m/s [/tex]
And because the nail is not moving:
[tex]v_{2_{i}}= 0[/tex]
[tex] p_{i} = m_{1}v_{1_{i}} = 0.25 kg*(-10 m/s) = -2.5 kg*m/s [/tex]
Now, the final momentum can be found taking into account that the hammer remains in contact with the nail during and after the blow:
[tex] p_{f} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]
Since the hammer and the nail are moving in the negative direction:
[tex]v_{1_{f}}[/tex] = [tex]v_{2_{f}}[/tex] = -9.7 m/s
[tex] p_{f} = -9.7 m/s(7 \cdot 10^{-3} kg + 0.25 kg) = -2.49 kg*m/s [/tex]
Finally, the impulse is:
[tex] J = p_{f} - p_{i} = - 2.49 kg*m/s + 2.50 kg*m/s = 0.01 kg*m/s [/tex]
Therefore, the impulse transferred to the nail is 0.01 kg*m/s.
I hope it helps you!
Calculate the wavelength of an orange light wave with a frequency of 5.085 x 10^14 Hz. The speed of light is 3.0 x 10^8 m/s.
^ meaning a power
Answer:
5.9 x 10⁻⁷m
Explanation:
Given parameters:
Frequency = 5.085 x 10¹⁴Hz
Speed of light = 3.0 x 10⁸m/s
Unknown:
Wavelength of the orange light = ?
Solution:
The wavelength can be derived using the expression below;
wavelength = [tex]\frac{v}{f}[/tex]
v is the speed of light
f is the frequency
wavelength = [tex]\frac{3 x 10^{8} }{5.085 x 10^{14} }[/tex] = 5.9 x 10⁻⁷m
How much work is needed to move an object 20 meters with 40 newtons of force?
a) 800 J
b) 850 N
c) 875 W
d) 825 m
Answer:
a) 800 J
Explanation:
Work is said to be done when a force induces movement over a distance in an object. The amount of work done (W) is calculated by multiplying the force by the distance traveled.
That is;
W = F × d
Where;
W = work done (J or N/m)
F = force (N)
d = distance (m)
In the information given in this question, F = 40N, d = 20m
Hence,
Work done = 40N × 20m
Work done = 800N/m or 800 J
interior crocodile alligator i drive a chevrolet movie theater
Answer:
nah bro tesla
Explanation:
A hammer strikes a nail with a 8 N force for 0.018 seconds. Calculate the impulse of the hammer.
Answer:
0.144
Explanation:
Impulse is defined as force multiplied by time
please mark me brainliest
What is the impact of age on flexibility? A. Younger people tend to develop flexibility more slowly. B. Younger people tend to be more flexible. C. Older people tend to be more flexible. D. Older people cannot maintain their flexibility.
Answer:
the answer is b
Explanation:
A moving body has energy due to its motion. This energy is called
Answer:
kinetic energy is the answer
Explanation:
kinetic energy is movement