Answer:
I = 2387.32 A
Explanation:
Given that,
Number of turns in the loop, N = 400
The radius of the circular coil, r = 0.66 m
The magnetic field inside the MRI, B = 1.2 T
We need to find the current in the loop. The magnetic field inside the solenoid is given by :
[tex]B=\mu_o NI\\\\I=\dfrac{B}{\mu_o N}\\\\I=\dfrac{1.2}{4\pi \times 10^{-7}\times 400}\\\\I=2387.32\ A[/tex]
So, the required current is equal to 2387.32 A.
A 1500-kg car travelling 90 km/h[N] collides with a 1200-kg minivan travelling 40 km/h[S]. After the collision, the two vehicles stick together.
a. Calculate the initial momentum of the car and the minivan.
b. Using the law of conservation of momentum, determine the total momentum of the two vehicles after the collision.
c. Calculate the final velocity of the two vehicles after the collision in metres per second.
Answer:
A) car - 37500 kg*m/s, minivan - 13332 kg*m/s
B) 50832 kg*m/s
C) 18.83 m/s
Explanation:
Realize that sticky collisions are modeled by: m1v1+m2v2=(m1+m2) vf
conevert to m/s....car going 25 m/s, minivan going 11.11 m/s
A) p=mv
p(car)=(1500)(25)
p(car)=37500 kg*m/s
p(minivan)=(1200)(11.11)
p(minivan)=13332 kg*m/s
B) 37500+13332=50832 kg*m/s
C) 37500+13332=(1500+1200) vf
50832=2700(vf)
18.83 m/s = vf
A motorcycle is traveling along a highway at 29 m/s. How far does the motorcycle travel in 18 s?
Answer:
the motorcycle travels 522 miles in 18 seconds Explanation: 29 x 18 is 522 I'm pretty sure that's what it was asking but I don't know
A ceiling fan with 90-cm-diameter blades is turning at 64 rpm . Suppose the fan coasts to a stop 28 s after being turned off. What is the speed of the tip of a blade 10 s after the fan is turned off
Answer:
the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
Explanation:
Given;
diameter of the ceiling fan, d = 90 cm = 0.9 m
angular speed of the fan, ω = 64 rpm
time taken for the fan to stop, t = 28 s
The distance traveled by the ceiling fan when it comes to a stop is calculated as;
[tex]d = vt = \omega r\times t= ( \frac{64 \ rev}{\min} \times \frac{2 \pi \ rad}{rev} \times \frac{1 \min}{60 \ s} \times 0.9 \ m) \times 28 \ s\\\\d = 168.89 \ m[/tex]
The speed of the tip of a blade 10 s after the fan is turned off is calculated as;
[tex]v = \frac{d}{t} \\\\v = \frac{168.89}{10} \\\\v = 16.889 \ m/s[/tex]
Therefore, the speed of the tip of a blade 10 s after the fan is turned off is 16.889 m/s.
(will give brainliest to whoever is correct and shows reasoning) What is the acceleration of an object that has a velocity of 60m/s and is moving in a circle of radius 50m?
Answer:
5.0/s
Explanation:
Answer:
b and a it is this that abewsr
A bump should primarily be used in which situation?
A. when the ball is going out of bounds
B. when returning a serve
C. to start game play
If matter cannot be created or destroyed, then how do you end up with
rust? Below is the equation for rust.
4Fe + 302 → 2Fe203
oxygen from the air
water in the atmosphere
oxygen from in the metal
there shouldn't be any oxygen
Your question is a "non sequitur", which means "it doesn't follow".
Your "then" doesn't contradict your "If", so no mystery is implied.
Maybe you're trying to say that matter is somehow not conserved in the equation . . . 4Fe + 302 → 2Fe203 . But it is. There are 4 Irons and 6 Oxygens on each side, so conservation is not violated here.
I looked up "rust" on Floogle, and got slapped with pages and pages of chemistry that I don't completely understand. But what it's saying is that rusting is a very complex chemical process, AND it doesn't happen unless there's some water involved.
So the bottom line is that there's a lot more going on than simply
4Fe + 302 → 2Fe203 ,
there's water going in and out of the process at every stage, and when it's all over, you have rusty iron, and mass has been conserved.
Do blood cells have a nuclei? Describe the shape of blood platelets.
Answer: Mature red blood cells don't have nuclei.
Explanation: " Platelets are irregularly shaped, have no nucleus, and typically measure only 2–3 micrometers in diameter. "
Hope this Helps!!
If you push with a power of 20 Watts
on a 150 Newton object, how long would
it take to push it over the 4.3 m?
Answer:
32.25 s
Explanation:
From the question,
P = W/t.............. Equation 1
Where P = Power, W = work done, t = time.
But
W = F×d................. Equation 2
Where F = force and d = distance
Substitute equation 2 into equation 1
P = F×d/t............... Equation 3
make t the subject of euqation 3
t = (F×d)/P............. Equation 4
Givn: F = 150 N, d = 4.3 m, P = 20 watts.
Substitute these values into equation 4
t = (150×4.3)/20
t = 32.25 s
Q1what is pinhole camera?
A girl weighing 45kg is standing on the floor, exerting a downward force of 200N on the floor. The force exerted on her by the floor is ..............
Select one:
a.
No force exerted
b.
Less than 2000N
c.
Equal to 200 N
d.
Greater than 200 N
Answer:
c.
Equal to 200 N..........
A group of particles of total mass 48 kg has a total kinetic energy of 320 J. The kinetic energy relative to the center of mass is 80 J. What is the speed of the center of mass?
A stream moving with a speed of 0.5 m/s reaches a point
where the cross-sectional area of the stream decreases to
one-fourth of the original area. What is the water speed in
this narrowed portion of the stream?
Explanation:
hi I like help but I couldn't
An object is accelerated by a net force in which direction?
A. at an angle to the force
B. in the direction of the force
C. in the direction opposite to the force
D. Any of these is possible.
Answer:
B. in the direction of the force
Explanation:
Sana nakatulong
HELP DUE TODAY BEST ANSWER GET BRAINLIE
One of the greatest dangers in a tornado is from flying objects. A 15 pound piece of lumber can turn into a flying missile that could severely damage walls and homes. A piece of steel with a mass of 200 pounds and travelling at the same velocity would cause even more damage. Select any evidence from the list below that you could use to explain why a 200 pound piece of steel would cause more damage than a 15 pound piece of wood travelling at the same velocity.
As the kinetic energy of an object increases, the force it can exert on another object decreases.
As the kinetic energy of an object increases, the force it can exert on another object increases.
Objects with more mass have less kinetic energy.
Objects with more mass have more kinetic energy.
As the velocity of an object increases, its kinetic energy decreases.
As the velocity of an object increases, its kinetic energy increases.
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
What is diffraction of light
Answer:
According to "http://ww2010.atmos.uiuc.edu" Diffraction is the slight bending of light as it passes around the edge of an object.
Some examples of Light Defraction would be..
-CD reflecting rainbow colours
-Sun appears red during sunset
-From the shadow of an object
PLEASE HELP
Section 1 - Question 6
Wave Movement Through Media
What could be happening to the wave as it travels from left to right?
A
It's moving through a medium whose density stays the same
B
It's moving from a low density medium to a high density medium.
С
It's moving from a high density medium to a low density medium.
D
It's moving from a low density medium, to a high density medium, and then back to a low density medium
Answer: B
Explanation:
When grip strength increases:
a. action potential voltage increases.
b. action potential frequency decreases.
c. action potential frequency increases.
d. action potential frequency increases.
e. the number of active motor units increases.
Answer:
e. the number of active motor units increases.
Explanation:
There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.
Time of the day when the Sun does not shine (___time)
N____N
Which of these is the BEST answer for why science is important?
Science can take us to other planets, even if it’s only through a telescope.
Science is part of human nature; it helps answer questions about how the world works.
Science helps us learn to think more critically and weigh evidence better.
Science gives us better tablet computers and games.
QQQUUUUCCCKKKK!!!!!!
What are some possible factors that can be the X
and Y axis of a motion graph?
Answer:
x-Speed/velocity
y-time.
Explanation:
because Speed is a rate of change of distance while time how long it takes a a car to move to a specific point
Soap bubbles can display impressive colors, which are the result of the enhanced reflection of light of particular wavelengths from the bubbles' walls. For a soap solution with an index of refraction of 1.21, find the minimum wall thickness that will enhance the reflection of light of wavelength 711 nm in air.
Answer:
the minimum wall thickness that will enhance the reflection of light is 146.9 nm
Explanation:
Given the data in the question;
At the first interface, a phase shift occurs as the incident light is in air that has less refractive index compare to the thin film of soap bubble.
At the second interface, no shift occurs,
condition for constructive interference;
t = ( m + 1/2) × λ/2n
where m = 0, 1, 2, 3 . . . . . .
now, the condition for the constructive interference;
t = mλ/2n
where t is the thickness of the soap bubble, λ is the wavelength of light and n is the refractive index of soap bubble.
so the minimum thickness of the film which will enhance reflection of light will be;
t[tex]_{min[/tex] = ( m + 1/2) × λ/2n
we substitute
t[tex]_{min[/tex] = ( 0 + 1/2) × 711 /2(1.21)
t[tex]_{min[/tex] = 0.5 × 711/2.42
t[tex]_{min[/tex] = 0.5 × 293.80165
t[tex]_{min[/tex] = 146.9 nm
Therefore, the minimum wall thickness that will enhance the reflection of light is 146.9 nm
Calculate the first and second order angles for light of wavelength 400. nm and 700. nm of the grating contains 1.00 x 104 lines/cm.
Answer:
[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]
[tex]44.43^{\circ}[/tex], second order does not exist
Explanation:
n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]
[tex]\lambda[/tex] = Wavelength
m = Order
Distance between slits is given by
[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]
[tex]\lambda=400\ \text{nm}[/tex]
m = 1
We have the relation
[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]
The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].
[tex]\lambda=700\ \text{nm}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]
Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.
The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].
Second order angle does not exist.
Cells use nutrients and oxygen to supply the body with the energy it needs. What three-body systems are working together in this situation?
A
nervous, digestive, and circulatory systems
B
digestive, circulatory, and excretory systems
C
circulatory, immune, and respiratory systems
D
digestive, respiratory, and circulatory systems
Answer:
The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.
Explanation:
so the answer is D
3
How does the electrical conductivity of metals
and metalloids change with an increase in
temperature?
Answer:
In metals there are free electrons at normal temperature so when we increase temperature it resistivity gets increases,so conductivity decreases,while in semiconductor the electrons are not free so when we increase the temperature the covalent bonds begin to break and the electron becomes free so conductivity get.
Explanation:
write the definition
Heredity, Dominant allele, recessive allele, probability, genotype, phenotype
Explanation:
Heredity: The passing on of physical or mental characteristics genetically from one generation to another.
Dominant allele: In genetics, dominance is the phenomenon of one variant of a gene on a chromosome masking or overriding the effect of a different variant of the same gene on the other copy of the chromosome. The first variant is termed dominant and the second recessive.
Answer:
Heredity: the passing on of physical or mental characteristics genetically from one generation to another.
Dominant Allele: a variation of a gene that will produce a certain phenotype, even in the presence of other alleles.
Recessive Allele: a variety of genetic code that does not create a phenotype if a dominant allele is present.
Probablity: used to measure the chance or likelihood of an event to occur.
Genotype: an organism's complete set of genetic material
Phenotype: the set of observable characteristics of an individual resulting from the interaction of its genotype with the environment.
5. How much heat is needed to warm .052 kg of gold from 30°C to 120°C? Note: Gold has a specific heat of 136
J/kg °C
Answer:
Q = 636.48 J
Explanation:
Given that,
The mass of gold, m = 0.052 kg
The temperature increase from 30°C to 120°C.
The specific heat of gold is 136 J/kg °C.
We need to find the heat needed to warm the gold. The formula for heat needed is given by :
[tex]Q=mc\Delta T\\\\Q=0.052\times 136\times (120-30)\\\\Q=636.48\ J[/tex]
So, 636.48 J of heat is needed to warm gold.
someone please help I can mark brainless
A reaction occurs when a compound breaks down. This reaction has one reactant and two or more products. Energy, as from a battery, is usually needed to break the compound apart.
Answer:
decomposition
Explanation:
A force of 12 N changes the momentum of a toy car from 3kgm/s t0 10kgm/s. Calculate the time the force took to produce this change in momentum.
Answer:
Time = 0.58 seconds
Explanation:
Given the following data;
Initial momentum = 3 kgm/s
Final momentum = 10 kgm/s
Force = 12 N
To find the time required for the change in momentum;
First of all, we would determine the change in momentum.
[tex] Change \; in \; momentum = final \; momentum - initial \; momentum [/tex]
[tex] Change \; in \; momentum = 10 - 3 [/tex]
Change in momentum = 7 kgm/s
Now, we can find the time required;
Note: the impulse of an object is equal to the change in momentum experienced by the object.
Mathematically, impulse (change in momentum) is given by the formula;
[tex] Impulse = force * time [/tex]
Making "time" the subject of formula, we have;
[tex] Time = \frac {impulse}{force} [/tex]
Substituting into the formula, we have;
[tex] Time = \frac {7}{12} [/tex]
Time = 0.58 seconds
The speed limmit on an interstate highway is posted at 75mi/h. What is the speed in kilometers per hour? In feet per second?
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu