"For a first order instrument with a sensitivity of .4 mV/K and a time" constant of 25 ms, find the instrument’s response as a function of time for a sudden temperature increase from 273 K to 473 K. Before the temperature increase, the instrument output was a steady 109.2 mV. Plot the response y(t) as a function of time. What are the units for y(t)? Find the 90% rise time for y(t90) and the error fraction, Γ(t90).

Answer:

5 W

Explanation:

The formula of the power is:

● P = W/t

W is the work and t is the time needed to do it(in seconds)

Let's calculate first the work that the force exerced:

W = Vector F . Vector d

D is the distance ( here 400 cm wich is 4 m)

Make a representation to see how are the vectors F and V.(picture below)

The vector F and d are colinear since Den is pushing the desk on the ground.

● W = 4 × 10 = 40 J

J is Joule

■■■■■■■■■■■■■■■■■■■■■■■■■■

● P = W / t

● P = 40/ 8

● P = 5 W

The power output of the force of 10N for 8 seconds to move the desk is 5 watts. Thus, the correct option is B.

Power is the amount of energy which is transferred or converted per unit time. In the SI system of Units, the unit of power is the watt, which is equal to one joule per second time.

We Know, P = W/t

where, P = Power,

W = Work done,

t = Time taken

P = F × s/t

where, F = Force applied,

s = distance travelled,

t = time taken

Here, F = 10N

s = 400cm = 4m

t = 8 sec

Substitute their values into the expression,

P = 10 × 4/8

P = 10 × 1/2

P = 5 Watt

So, the power output will be 5 watts.

Therefore, the correct option is B.

Learn more about Power here:

https://brainly.com/question/287674

#SPJ6

Answer:

The x - intercept is 1/3

The y - intercept is 1/2

The gradient is -3/2

Explanation:

To find the x - intercept of the equation 2y + 3x = 1, we find the value of x when y = 0. So,

2y + 3x = 1

2(0) + 3x = 1

0 + 3x = 1

3x = 1

x = 1/3

So, the x - intercept is 1/3

To find the y - intercept of the equation 2y + 3x = 1, we find the value of y when x = 0. So,

2y + 3x = 1

2y + 3(0) = 1

2y + 0 = 1

2y = 1

y = 1/2

So, the y - intercept is 1/2

To find the gradient of the equation 2y + 3x = 1, we re-write it in gradient intercept form by making y subject of the formula.

So, 2y + 3x = 1

2y = -3x + 1

y = -3x/2 + 1/2

The coefficient of x which equals -3/2 is the gradient.

The gradient is -3/2

Answer:

Think of it like this potential energy is exactly what it sounds like it has potential. while kinetic energy which is what the body possesses by virtue of being in motion.

Explanation:

Answer:

A = 100m

B = 120m

C = 170m

D = 160m

E = 190m

F = 145m

G = 130m

H = 170m

I = 100m

J = 95m

K = 100m

Explanation:

A = 100m

B = 120m

C = 170m

D = 160m

E = 190m

F = 145m

G = 130m

H = 170m

I = 100m

J = 95m

K = 100m

The contour intervals are 10m apart, anything exactly between 2 contour lines is 5m, and the cut lines are depressions so insisted of going up they go down.

Explanation:

Assuming the 10 m distance is the vertical displacement, the work done by both people is the same.

Work = force × distance

W = (250 N) (10 m)

W = 2500 J

The power of the first person is:

Power = work / time

P = 2500 J / 120 s

P = 20.83 W

The power of the second person is:

P = 2500 J / 60 s

P = 41.67 W

Answer:

The correct answers are 2, 4

Explanation:

The dispersion of light occurs due to the interaction of electromagnetic radiation with matter, let's analyze the phenomenon, when a ray of light reaches a particle is absorbed and subsequently re-emitted in all directions, for radiation of lower wavelength (higher frequency ) the highest absorptions and therefore the missionary also the highest; An example of this is the blue light from the atmosphere, which is the absorption of blue light and its subsequent re-emission

Based on this explanation, the dispersion in gas particles or molecules is proportional to the frequency of the light (inversely proportional to the wavelength) and is also proportional to the number of dispersing particles in the air, that is, to the total volume of the particles. dispersers.

The correct answers are 2 and 4

Mass = density • volume

so (12)(920)(kg/m^3•m^3)

11040 kg

Answer:

Your vehicle's tires work hard every time you go on the road. As they age, they become more and more worn down, especially if you use the same set of tires year round. As a result, your tires will need to be replaced. ... If you are driving on a dirt road, or one that is worn, chances are you will feel vibrations.

Answer:

O- to track how fast a heart beats

Explanation:

[tex] \huge{ \underline{ \boxed{ \bf{ \blue{Solution:}}}}}[/tex]

We will solve the above Question by using equations of motion that are:-

Here,

By using first equation of motion,

⇛ v = u + at

⇛ 10 = 15 + a(2)

⇛ -5 = 2a

Flipping it,

⇛ 2a = -5

⇛ a = -2.5 m/s² [ANSWER]

❍ Acclearation is negative because final velocity is less than Initial velocity.

━━━━━━━━━━━━━━━━━━━━

Answer:

The magnification of the lens is 21

Explanation:

Please see full answer in the attached image since the system kept on refusing to accept my typed answer complaining of bad use of words or presence of a link.

The magnification of the lens is m = 21

Answer:

its 21 for Acellus

Explanation:

Answer: 19 meters.

Explanation:

We want to find the total displacement between t = 2s and t = 4s.

To do it, we can integrate our function, first write our velocity equation.

for t ≤ 3s, we have a linear equation, let's write it:

A linear relationship can be written as:

y = a*t + b

where a is the slope and b is the y-axis intercept.

For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:

a = (y2 - y1)/(x2 - x1).

Now we can see that our line passes through the points (1, 0) and (0, -2)

then the slope is:

a = (0 -(-2)/(1 - 0) = 2/1 = 2

and knowing that when t = 0s, v(0s) = -2m/s, then our equation is:

v(t) = (2m/s^2)*t - 2m/s for t ≤ 3s

now, for t ≥3s the equation is constant, v(t) = 4m/s.

then we have

v(t) = (2m/s^2)*t - 2m/s -------if t ≤ 3s

v(t) = 4m/s ----- if t ≥ 3s

Now we integrate over time to get the position:

for t ≤ 3s we have:

p(t) = (1/2)*(2m/s^2)*t^2 - 2m/s*t + C

where C is a constant of integration, as we are calculating the displacement  this constant actually does not matter, so we can use C = 0m

p(t) = (1m/s^2)*t^2 - 2m/s*t  for t ≤ 3s

and p(3s) =  (1m/s^2)*3s^2 - 2m/s*3s = 9m - 6m = 3m is the initial position of the other part of the function.

for t ≥ 3s we have:

p(t) = 4m/s*t + p(3s) = 4m/s*t + 3m

then the position equation is:

p(t) = (1m/s^2)*t^2 - 2m/s*t  ---- t ≤ 3s

p(t) = 4m/s*t + 3m --- if t ≥ 3s

Now the displacement will be:

p(4s) - p(2s) where for each time, you need to use the correct function:

p(4s) = 4m/s*4s + 3m = 16m + 3m = 19m

p(2s) =  (1m/s^2)*2s^2 - 2m/s*2s = 4m - 4m = 0m

p(4s) - p(2s) = 19m - 0m = 19m

The butterfly displacement x from t=2 to 4s is 19 meters.

The spacing between two specified points is represented by the one-dimensional quantity of displacement (symbolised as d or s), commonly known as length or distance.

The total displacement between t = 2s and t = 4s.

Integrate our function, the velocity equation.

for t ≤ 3s, we have a linear equation, let's write it:

A linear relationship can be written as:

y = a x t + b

where a is the slope and b is the y-axis intercept.

For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:

a = (y2 - y1)/(x2 - x1).

The line passes through the points (1, 0) and (0, -2)

The slope is:

a = (0 -(-2)/(1 - 0) = 2/1 = 2

When t = 0s, v(0s) = -2m/s, then our equation is:

v(t) = (2m/s²) x t - 2m/s for t ≤ 3s

now, for t ≥3s the equation is constant, v(t) = 4m/s.

v(t) = (2m/s²) x t - 2m/s -------if t ≤ 3s

v(t) = 4m/s ----- if t ≥ 3s

Now we integrate over time to get the position:

for t ≤ 3s we have:

p(t) = (1/2) x (2m/s²) x t^2 - 2m/s x t + C

where C is a constant of integration, to calculate the displacement  this constant actually does not matter,

p(t) = (1m/s²)*t^2 - 2m/s x t  for t ≤ 3s

and p(3s) =  (1m/s^2) x 3s² - 2m/s x 3s = 9m - 6m = 3m is the initial position of the other part of the function.

for t ≥ 3s we have:

p(t) = 4m/s x t + p(3s) = 4m/s x t + 3m

then the position equation is:

p(t) = (1m/s^2) x t² - 2m/s x t  ---- t ≤ 3s

p(t) = 4m/s x t + 3m --- if t ≥ 3s

Now the displacement will be:

p(4s) - p(2s) where for each time, you need to use the correct function:

p(4s) = 4m/s x 4s + 3m = 16m + 3m = 19m

p(2s) =  (1m/s²) x 2s²- 2m/s x 2s = 4m - 4m = 0m

p(4s) - p(2s) = 19m - 0m = 19m

Thus, the displacement is 19 m.

To learn more about displacement, refer to the link:
https://brainly.com/question/11934397

#SPJ2

Answer:

yes

Explanation:

this is simple

the horizontal line is adjacent

the vertical line is opposite

recall that cos x=adj/hyp

adj=hyp(cos x)

while opp=hyp(sin x)

Answer:

Ra, 88

Ru, 44

Cr, 24

Explanation:

i

the remaining mass number is 224(228 - 4), and it's atomic number is 88(90 - 2). The element is Radium, Ra

ii

the remaining mass number is 98(98 - 0), and it's atomic number is 44(45 - 1). The element is Ruthenium, Ru

iii

The remaining mass number is 52(52 - 0), and it's atomic number is 24(23 - -1). The element is Chromium, Cr

Answer:

The correct option is;

a. 12.5 g

Explanation:

The given parameters are;

The initial mass of the radioactive substance = 200 g

The half life of the radioactive substance = 50 years

The time duration for the disintegration = 200 years

The formula for half life is given as follows;

[tex]N(t) = N_0 \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{1/2}}[/tex]

Where:

N(t) = Quantity of the remaining substance

N₀ = Initial radioactive substance quantity  = 200 g

t = Time duration  = 200 years

[tex]t_{1/2}[/tex] = Half life of the radioactive substance  50 years

Therefore, we have;

[tex]N(t) =200 \times \left (\dfrac{1}{2} \right )^{\dfrac{200}{50} } =200 \times \left (\dfrac{1}{2} \right )^4 = 12.5 \ g[/tex]

Therefore, at the end of 200 years, the quantity left = 12.5 g.

Answer:

Answer is false

Explanation:

may this answer is helpful for you

Answer:

1) Tailored software  Library management system

2) Utility software Scan viruses

3) Operating system Used to coordinate the hardware of the computer

4) Packaged software set of programs Microsoft office

Explanation:

1) A tailored software, also known as a custom software, is one that is designed and tailor-made only for a particular organisation

2) A utility software is a computer maintenance and analysis software used to enable proper functioning of the computer by performing restorative and maintenance tasks

3) Operating system software

The operating system software controls the operation of the computer hardware within the system and enables the operation of other programs in the computer

4) Packaged software are a collection of programs that are oriented to perform interrelated tasks that a focused to a particular area, such as Microsoft Office.

Answer:

I found this question elsewhere on brainly and the answer was verified. Here it is!

Explanation:

Grizzly bear habitats is the habitat or the physical space where the bear lives. Grizzly bears can be found in many different habitats from dense forests to subalpine meadows, arctic tundra and open plains. We can also conclude that all of the bears live in grizzly bear's habitat in order to survive.

The best description of a grizzly bear’s habitat is:

A habitat is the natural surrounding or place where an organism lives, grows and competes with other organisms for resources. It is a physical area.

There are three major types of habitat which includes:

A grizzly bear is a subspecies of brown bear and is resident in the northern plains of America and their habitat is a physical location where they live.

Therefore, the correct answer is option D

Read more here:

https://brainly.com/question/19482426

600,000

PLEASE MARK AS BRAINLIEST ANSWER

Answer:

С. a single component that can't be separated

Explanation:

Substance : It is the pure form of matter or we can say that it is a matter that contains only one type of molecule of atom. It can not be separated by physical process.

For example : Water is a substance.

Mixture : It is a combination of different type of atoms or molecules and it is an impure form.

For example : Sodium chloride with water is a mixture.

Hence, the correct option is, (C) a single component that can’t be separated.

A substance is a single component that can't be separated by the physical process therefore the correct answer is option C.

A chemical compound is a mixture of two or more chemical components, whether they are related or unrelated.

For instance, the molecular H2O is composed of one hydrogen atom and two oxygen atoms.

For instance, water is a material that cannot be physically divided yet may be separated using electrolysis.

Mixture: This impure form is made up of several different kinds of atoms or molecules.

A mixture is, for instance, sodium chloride and water.

As a result, (C), a single, irreducible component, is the right answer.

To learn more about a chemical compound here, refer to the link;

brainly.com/question/12166462

#SPJ2

Answer:

you live it will be around 23 to 82% angle

Explanation:

just think about yourself going in the high-speed and then jumping and then just think of all know that person just jumping without being going to high speed

Answer:

External locus of control

Explanation:

External locus of control is an attitude people possess that makes them attribute their failures or successes to factors other than themselves. The opposite of this type of attitude is the Internal locus of control where the individuals take responsibility for the outcomes of their actions whether good or bad. One good thing about the external locus of control is that when the individuals with this characteristic record successes, they attribute it to others and this presents them as people with team spirit. However, when they record failures, they do not want to take the blame, but rather attribute it to others.

Fred exhibits an external locus of control because he attributed his speeding to other factors like the road signs and GPS instead of fully admitting that it was his fault.

this process is called parellelogram method of resolving vectors.

Explanation:

We know that,

[tex]v = rw[/tex]

Where, v = tangential velocity (m/sec)

r = radius = 17.67 m

w = angular velocity = 0.83 revs/ sec

v = 14.66 m/sec

Distance in one minute = 879.6 m

= 2885.82 feet

Answer: ear phones

Explanation:

You can physically hold ear phones, but you can't hold music, sunlight, or heat.

Answer:

d

Explanation:

a and b: it vibrates in both the difference is whether you hear the sound or not the lack or presence of molecules does not hinder the timing fork from vibrating but can hinder you from hearing since sound is a mechanical wave therefore require a medium bringing us to (c) these vibrations are transmitted because there is presence of a medium i.e air molecules so sound can be heard

but in (c) it is true since the vibrations are created but are not transmitted to your ears due to lack of a medium

Explanation:

a clinical thermometer is a thermometer used to measure human body temperature. mostade in the 20th century are mercury-in-glass thermometer. they ate accurate and sensitive having a narrow place where the mercury level rises very fast. a kink in the tube stops the mercury level from falling on its own.

hope it helps you

Answer:

hydrometer

Explanation:

A hydrometer is an instrument used to determine specific gravity. It operates based on the Archimedes principle that a solid body displaces its own weight within a liquid in which it floats. Hydrometers can be divided into two general classes: liquids heavier than water and liquids lighter than water.

[tex] \large{ \boxed{ \bf{ \color{red}{Universal \: law \: of \: gravitation}}}}[/tex]

Every object in the universe attracts every other object with a force which is proportional to the product of their masses and inversely proportional to the square of the distance between them. The forces along the line joining the centre of the two objects.

❍ Let us consider two masses m1 and m2 line at a separation distance d. Let the force of attraction between the two objects be F.

According to universal law of gravitation,

[tex] \large{ \longrightarrow{ \rm{F \propto m_1 m_2}}}[/tex]

Also,

[tex] \large{ \longrightarrow{ \rm{ F \propto \dfrac{1}{ {d}^{2} } }}}[/tex]

Combining both, We will get

[tex] \large{ \longrightarrow{ \rm{F \propto \dfrac{ m_1 m_2}{ {d}^{2}}}}} [/tex]

Or, We can write it as,

[tex] \large{ \longrightarrow{ \rm{F \propto \: G \dfrac{ m_1 m_2}{ {d}^{2} }}}}[/tex]

Where, G is the constant of proportionality and it is called 'Universal Gravitational constant'.

☯️ Hence, derived !!

━━━━━━━━━━━━━━━━━━━━