The figures reported for PT and SS as of December 31, 20x5 include inventory, sales, cost of goods sold, and investment income. The specific amounts are provided.
As of December 31, 20x5, the figures reported for PT and SS are as follows:
PT:
Inventory: P400,000
Sales: P800,000
Cost of goods sold: P400,000
SS:
Inventory: P200,000
Sales: P600,000
Cost of goods sold: P300,000
The figures indicate the financial status of PT and SS at the given date. Inventory represents the value of goods held by the organizations for future sales. Sales represent the total revenue generated from the sale of goods. Cost of goods sold represents the expenses incurred in producing or purchasing the goods sold. However, the investment income for PT and additional operational figures for both PT and SS are not provided in the given information. These figures are essential for a comprehensive analysis of the financial performance and operations of the organizations.
Learn more about Investment here: brainly.com/question/15105766
#SPJ11
Choosing the Best Model Which model, of all the forecast models created in this assignment, is the best? Cite one factor that led you to believe the best model is more appropriate than the other ones. Suggest two improvements that could be made to make the forecast even better (i.e. think in terms of the data available, not simply stating changes that could be made to alpha values)? Part 4: Choosing the Best Model Which model, of all the forecast models created in this assignment, is the best? Cite one factor that led you to believe the best model is more appropriate than the other ones. Suggest two improvements that could be made to make the forecast even better (i.e. think in terms of the data available, not simply stating changes that could be made to alpha values)?
The best model of all the forecast models created in the assignment is the SES model. The Single Exponential Smoothing (SES) model is the best.
The Single Exponential Smoothing (SES) model is the best because it is the only model that closely follows the actual demand with minimal errors.The forecasting error in the SES model was significantly lower than the errors in the other models, indicating that it is the most suitable model for this data set. Due to the lack of regular seasonality and the relatively steady growth rate, the SES model is well-suited for these conditions. Thus, the best model for this data set is the SES model. It is the best fit for the data available, as the data has no regular seasonal pattern and a stable growth rate.There are a few changes that could be made to the forecast to improve it further. One possible improvement is to include more historical data in the model. By doing so, the model will have a better understanding of past trends and be able to more accurately predict future ones. Another improvement could be to incorporate additional variables such as promotions, discounts, or advertising into the model. This will help to account for any external factors that may affect demand and help to improve the accuracy of the forecast.
To know more about Single Exponential Smoothing visit:
https://brainly.com/question/30265998
#SPJ11
A software company has been approached to develop a financial software to manage the loan accounts of customers. Some of the important requirements as captured by the RE team are (R1 to R5) and their priority ratings (specified out of 5) are: (R1, 5) (R2, 4) (R3, 5) (R4, 2) (R5, 4). There are 5 technical requirements as [T1, T2, T3, T4, T5]. The relationship between the various customer requirements and the technical requirements are: (R1 -> T1: Strong) (R1-> T3: Medium) (R2-> T1: Strong) (R2-> T2: Medium) (R2-> T4: Weak) (R2-> T5: Strong) (R3-> T1: Strong) (R3-> T3: Medium) (R3-> T4: Weak) (R3-> T5: Weak) (R4-> T2: Medium) (R4-> T4: Weak) (R4-> T5: Weak) (R5-> T1: Strong) (R5-> T3: Strong) (R5-> T4: Weak) (Strong -> 9) (Medium -> 3) (Weak -> 0) (No relationship -> 0)
(a) Calculate the priority percentage for each of the customer requirements.
b) Calculate the target importance values for each technical requirement and also calculate the respective importance percentages. Identify and discuss which technical requirement has the highest importance value. [NO NEED TO DRAW HOUSE OF QUALITY in the answer, only show the calculations and results]
Technical Requirement 1 (T1) has the highest importance value. Its importance percentage is 33.5%.
(a) Calculation of Priority Percentage for Each of the Customer Requirements:
The priority percentage for each customer requirement will be calculated as follows:
Priority Percentage = (Priority Rating / Sum of all Priority Ratings) x 100%
For the above-given problem, the sum of all priority ratings is (5+4+5+2+4) = 20
(a) Priority Percentage for Each of the Customer Requirements(R1) Priority Percentage = (5 / 20) x 100%
= 25%
(R2) Priority Percentage = (4 / 20) x 100%
= 20%
(R3) Priority Percentage = (5 / 20) x 100%
= 25%
(R4) Priority Percentage = (2 / 20) x 100%
= 10%
(R5) Priority Percentage = (4 / 20) x 100%
= 20%
(b) Calculation of Target Importance Values and Importance Percentages of Technical Requirements:
The target importance value for each technical requirement will be calculated using the formula:
Target Importance Value = Σ (Priority Percentage x Relationship Rating)
For the given problem, the target importance values for each technical requirement are as follows:
T1 Target Importance Value = [(25% x 5) + (20% x 4) + (25% x 9) + (0% x 0) + (25% x 9)]
= 4.5
T2 Target Importance Value = [(0% x 0) + (20% x 4) + (0% x 0) + (10% x 2) + (0% x 0)]
= 0.8
T3 Target Importance Value = [(25% x 3) + (0% x 0) + (25% x 9) + (0% x 0) + (25% x 9)]
= 4.5
T4 Target Importance Value = [(0% x 0) + (20% x 2) + (0% x 0) + (10% x 2) + (0% x 0)]
= 0.4
T5 Target Importance Value = [(25% x 9) + (20% x 0) + (0% x 0) + (0% x 0) + (25% x 4)]
= 3.25
The importance percentage of each technical requirement will be calculated using the formula:
Importance Percentage = (Target Importance Value / Sum of all Target Importance Values) x 100%
For the above-given problem, the sum of all target importance values is (4.5+0.8+4.5+0.4+3.25)
= 13.45
(a) Importance Percentage of Each Technical Requirement
(T1) Importance Percentage = (4.5 / 13.45) x 100% = 33.5%
(T2) Importance Percentage = (0.8 / 13.45) x 100% = 5.96%
(T3) Importance Percentage = (4.5 / 13.45) x 100% = 33.5%
(T4) Importance Percentage = (0.4 / 13.45) x 100% = 2.97%
(T5) Importance Percentage = (3.25 / 13.45) x 100% = 24.15%
To know more about Technical Requirement, visit:
https://brainly.com/question/30002236
#SPJ11
Which, if true, would be the best rationale for your decision?
Select an option from the choices below and click Submit.
This would give you the maximum amount of control over the business and the product.
This is a low-risk approach that does not require you to establish operations in the host country.
This strategy would enable you to share costs, risks, and skills with a company in the region, and enable you to enter and compete in markets that would otherwise be unavailable.
The option that would be the best rationale for your decision is as follows:This strategy would enable you to share costs, risks, and skills with a company in the region, and enable you to enter and compete in markets that would otherwise be unavailable.
If the strategy is enabling the sharing of costs, risks, and skills with a company in the region, then this would be the best rationale for the decision. It would enable you to enter and compete in markets that would otherwise be unavailable. Hence, this option is true
This strategy would enable you to share costs, risks, and skills with a company in the region, and enable you to enter and compete in markets that would otherwise be unavailable.
Learn more about share costs: https://brainly.com/question/28328882
#SPJ11
Solve the questions quickly please i want this today
Task 2: Student should develop a business plan for any innovative business idea with the following components (Initial investment should be between 10,000 R.O. - 40,000 R.O. only): (75 Marks) 1. Produ
The business plan is centered around an innovative business idea that requires an initial investment between 10,000 R.O. and 40,000 R.O.
The business plan begins with a detailed description of the product or service the business offers. This section outlines the unique features and benefits of the offering, highlighting its innovation and competitive advantage in the market. The next component involves analyzing the target market, identifying the specific customer segments, and understanding their needs, preferences, and buying behavior. This information helps tailor the marketing and sales strategy to effectively reach and engage the target audience.
The marketing and sales strategy section outlines the promotional activities, pricing strategy, distribution channels, and customer acquisition methods. It focuses on creating brand awareness, generating leads, and converting them into paying customers. The operational plan details the day-to-day operations, including production processes, supply chain management, staffing requirements, and location considerations.
Learn more about investment click here:
brainly.com/question/15105766
#SPJ11
Using the situation described in the previous problem, assume that we will need to advertise the availability of the new product and we expect this cost to increase our advertising budget by $100,000. How would you model this additional advertising expense related to the new product? Is this a relevant cost and if so, would it be a positive or negative cash flow? Part 3 or 4: Continuing with this same situation as the previous qustion, assume that current factory overhead is $150,000 per year but after the new product is introduced, the factory overhead will increase to $200,000 because the new product requires addition procedures. How much (if any) of the factory overhead should be modeled with the new product? Would this be modeled as a positive or negative cash flow? Part 4 of 4: Continuing with the factory overhead situation described above, how would you model the factory overhead if new product is expected to replace 50% of the old product’s sales in first year and the rest of the old products sales in the second year?
Part 3 or 4: Continuing with this same situation as the previous qustion, assume that current factory overhead is $150,000 per year but after the new product is introduced, the factory overhead will increase to $200,000 because the new product requires addition procedures. How much (if any) of the factory overhead should be modeled with the new product? Would this be modeled as a positive or negative cash flow?
Part 4 of 4: Continuing with the factory overhead situation described above, how would you model the factory overhead if new product is expected to replace 50% of the old product’s sales in first year and the rest of the old products sales in the second year?
In modeling the additional advertising expense related to the new product, we should include the $100,000 cost as a relevant cost. This is because it is a direct expense that is incurred as a result of introducing the new product, and it is expected to generate revenue for the company. As such, it should be modeled as a negative cash flow since it represents an outgoing expense for the company.
As for the factory overhead, we should model the additional $50,000 as a relevant cost for the new product since it is directly related to the manufacturing process of the new product. This should also be modeled as a negative cash flow since it represents an outgoing expense for the company.
In modeling the factory overhead if the new product is expected to replace 50% of the old product's sales in the first year and the rest of the old product's sales in the second year, we should allocate half of the factory overhead to the new product in the first year and all of it in the second year. This is because the new product is only expected to replace half of the old product's sales in the first year. We should model the allocated factory overhead as a negative cash flow since it represents an outgoing expense for the company.
To know more about modeling visit:-
https://brainly.com/question/19426210
#SPJ11
Using the inventory information, what will be the ending inventory amount? (Show your calculations):
beginning inventory = $170,000
Purchase = $140,000
Gross profit = 30%
Sale = $260,000
Answer :
By using the given information, The ending inventory amount is $128,000.
To calculate the ending inventory amount, you can use the following formula:
Ending inventory = Beginning inventory + Purchases - Cost of goods sold
Here’s how you can calculate the cost of goods sold:
Cost of goods sold = Sales * (100% - Gross profit percentage) = $260,000 * (100% - 30%) = $182,000
Using this information, you can calculate the ending inventory amount as follows:
Ending inventory = Beginning inventory + Purchases - Cost of goods sold = $170,000 + $140,000 - $182,000 = $128,000
Therefore, the ending inventory amount is $128,000.
To know more about inventory amount
https://brainly.com/question/13439318
#SPJ11
the out-of-pocket expenses incurred in producing a good are also known as
The out-of-pocket expenses incurred in producing a good are also known as "explicit costs".
Explicit costs refer to the actual monetary payments made by a firm for the use of resources outside of the firm, such as wages paid to employees, rent paid on a leased property, and payments made to suppliers for raw materials.
These expenses can be easily quantified and recorded in a firm's financial statements. In contrast, implicit costs refer to the opportunity costs of using resources owned by the firm, such as the cost of using owner's time or the foregone interest that could have been earned on funds invested in the business.
Implicit costs are not recorded as expenses in the financial statements but are important for determining economic profit.
learn more about explicit costs here
https://brainly.com/question/13599226
#SPJ11
Cullumber Company has two production departments: Cutting and Assembly. July 1 inventories are Raw Materials $3,528, Work in Process-Cutting $2,436, Work in Process-Assembly $8,904, and Finished Goods $26,040. During July, the following transactions occurred. 1. Purchased $52,500 of raw materials on account. 2. Incurred $50,400 of factory labor. (Credit Wages Payable.) 3. Incurred $58,800 of manufacturing overhead: $33,600 was paid and the remainder is unpaid. 4. Requisitioned materials for Cutting $13,188 and Assembly $7,476. 5. Used factory labor for Cutting $27.720 and Assembly $22,680. 6, Applied overhead at the rate of $18 per machine hour. Machine hours were Cutting 1,412 and Assembly 1.444. 7. Transferred goods costing $56,784 from the Cutting Department to the Assembly Department. 8. . Completed and transferred goods costing $113,316 from Assembly to Finished Goods Inventory. 9. Sold goods costing $126,000 for $168,000 on account. Journalize the transactions. (List all debit entries before credit entries. Credit account titles are automatically indented when amount is entered. Do not indent manually.) No. Account Titles and Explanation 1. I N 3. Debit Credit 7. 8. 9. (To record the cost of goods sold) (To record the sale) 100 40 ụ 3
Cullumber Company has two production departments Cr. $126,000.
Journalizing the transactions of Cullumber Company
Transaction 1: Purchased raw materials of $52,500 on account. Raw Materials Dr. $52,500Accounts Payable Cr. $52,500
Transaction 2: Incurred $50,400 of factory labor.
Wages Payable Dr. $50,400Factory Labor Cr. $50,400
Transaction 3: Incurred $58,800 of manufacturing overhead; $33,600 was paid and the remainder is unpaid.
Manufacturing Overhead Dr. $58,800Cash Dr. $33,600Accounts Payable Cr. $33,600Accrued Expenses Payable Cr. $25,200Transaction 4: Requisitioned materials for Cutting $13,188 and Assembly $7,476.Raw Materials-Cutting Dr. $13,188Raw Materials-Assembly Dr. $7,476Accounts Payable Cr. $20,664Transaction 5: Used factory labor for Cutting $27.720 and Assembly $22,680.F
actory Labor-Cutting Dr. $27,720Factory Labor-Assembly Dr. $22,680Wages Payable Cr. $50,400Transaction 6: Applied overhead at the rate of $18 per machine hour. Machine hours were Cutting 1,412 and Assembly 1,444.Manufacturing Overhead Dr. $50,832 (1412 + 1444) * $18Work in Process-Cutting Cr. $25,296 (1412 * $18)Work in Process-Assembly Cr. $25,536 (1444 * $18)Transaction 7: Transferred goods costing $56,784 from the Cutting Department to the Assembly Department.Work in Process-Assembly Dr. $56,784Work in Process-Cutting Cr. $56,784Transaction 8: Completed and transferred goods costing $113,316 from Assembly to Finished Goods.Inventory Finished Goods Dr. $113,316Work in Process-Assembly Cr. $113,316Transaction 9: Sold goods costing $126,000 for $168,000 on account.Accounts Receivable Dr. $168,000Sales Cr. $168,000Cost of Goods Sold Dr. $126,000Inventory Finished Goods Cr. $126,000
Note: The numbers in brackets are the balance of the inventory accounts after adjusting for the journal entries. You can calculate the balance of the inventory accounts by adding debits (when applicable) and subtracting credits to the balance at the beginning of the month.
To know more about Company visit:
https://brainly.com/question/30532251
#SPJ11
Suppose an open economy is described in the short run by the following standard IS-LM model: IS-curve (goods market equilibrium condition): R = a +e+g+G 1-b(1 t) + m. n+d n+d Y with 0
In the given short-run IS-LM model, we have the IS-curve representing the goods market equilibrium condition in an open economy.
The equation is R = a + e + g + G - b(1 - t) + m * n + d * Y, where R represents the interest rate, a represents autonomous consumption, e represents autonomous investment, g represents government spending, G represents government transfers,
b represents the marginal propensity to consume, t represents the tax rate, m represents the marginal propensity to import, n represents net exports, and d represents the marginal propensity to save.
The IS-curve shows the combinations of output (Y) and the interest rate (R) that achieve equilibrium in the goods market.
It indicates the relationship between aggregate output and the interest rate, taking into account factors such as consumption, investment, government spending, taxes, imports, exports, and saving.
The equation implies that an increase in autonomous consumption (a) or investment (e), government spending (g), government transfers (G), or net exports (n) will shift the IS-curve to the right, indicating higher output and a lower interest rate. Conversely, an increase in taxes (t), marginal propensity to import (m), or marginal propensity to save (d) will shift the IS-curve to the left, indicating lower output and a higher interest rate.
To know more about IS-LM model, click this link-
brainly.com/question/32407094
#SPJ11
Need help for below question and please explain which criminology theory apply to this question. Can you please explain this question with real life example please
What do you think reinforces the public’s opinions towards crime?
The public’s opinions towards crime are reinforced by the media, specifically the news. The media usually highlight heinous crimes, sensationalize them and provide information that may not necessarily be accurate, yet the public feeds on them.
The public’s opinions towards crime are reinforced by the media, specifically the news. The media usually highlight heinous crimes, sensationalize them and provide information that may not necessarily be accurate, yet the public feeds on them. The media portrays certain races and ethnic groups negatively, and the public may begin to stereotype these groups as criminals. Some individuals may also have personal experiences that inform their opinions towards crime, for example, being a victim of crime. Family, friends, and peers can also shape an individual’s opinions. They may share their own experiences or fears that are then passed down to the individual. Finally, socialization in the family, education, and media can shape one’s opinions. Socialization is the process by which people learn their norms and values. It is the process by which people learn what is right and wrong. Criminologists have developed different theories that help explain why people commit crimes. The theory that best applies to the above question is the social learning theory. This theory suggests that people learn from their environments. Real-life examples of the social learning theory can be seen in young children who learn aggressive behaviors by watching violent media, or people who begin to engage in drug use after spending time with people who use drugs.
To know more about social learning theory visit: https://brainly.com/question/5865745
#SPJ11
TRUE/FALSE. It is normal to have a debit balance in the allowance for
doubtful accounts account after adjusting journal entries at the
end of the year.
FALSE. "It is not normal to have a debit balance in the allowance for doubtful accounts account after adjusting journal entries at the end of the year."
It is not normal to have a debit balance in the allowance for doubtful accounts account after adjusting journal entries at the end of the year. The allowance for doubtful accounts is a contra-asset account that is used to estimate and record potential bad debts or uncollectible accounts receivable. It represents the amount that the company anticipates it will not be able to collect from its customers.
Typically, the allowance for doubtful accounts has a credit balance, as it is set up as a reserve against accounts receivable. This credit balance is created by recording an adjusting entry at the end of the accounting period to increase the allowance based on an estimate of potential bad debts. This estimation is done based on factors such as historical collection patterns, aging of accounts receivable, and the overall creditworthiness of customers.
The adjusting entry to increase the allowance for doubtful accounts is typically a credit to the account, increasing the reserve for bad debts. A debit balance in the allowance for doubtful accounts would suggest that the reserve has been overdrawn, which is not the norm. A debit balance could indicate an error or incorrect recording of transactions related to bad debts.
Therefore, it is not normal to have a debit balance in the allowance for doubtful accounts account after adjusting journal entries at the end of the year.
To learn more about debit balance, Visit:
https://brainly.com/question/30976341
#SPJ11
Background: The corporate IT department has been notified that a new office building is ready for occupancy. All rooms have ‘wired network ports’ to access the network. Wireless routers have been installed throughout the building to provide wireless access. NOTE: each requirement below may contain multiple tasks. Break them down into separate tasks (i.e. deploy and test are 2 separate tasks). Group similar actions into a block of tasks (i.e., Purchase Resources Block; Setup Equipment Block; etc.). Project Specifications: • Purchase, receive, setup, deploy and test Network Servers. o Purchase Network Servers separately from other equipment. o Receive includes entering the Network Servers’ serial number into the inventory database and placing an inventory tag on the equipment (2 separate tasks) at the corporate IT area. o Setup includes loading and testing network software (2 separate tasks), at the corporate IT area, before deployment. o Deploy/deliver network servers to the IT Area of the new building. o Test the servers to ensure they work properly. o NOTE: Network servers must be operational in the new building (deployed and tested) before other equipment can be tested in the new building for internet and wireless connectivity. • Purchase, receive, setup, deploy and test Desktop PCs and Laptops. o Purchase of desktops and laptops can be done together but must be done separately from other equipment. o Receive includes entering the Desktop/Laptop serial number into the inventory database and placing an inventory tag on the equipment at the corporate IT area. o Setup includes loading and testing corporate software, at corporate IT, before deploying. ▪ Corporate software has already been purchased and is not part of this project. o Deploy/deliver Desktops/Laptops to the new building. o Test Desktops to ensure they can access the network via the ‘wired network ports’ in the new building. o Test Laptops to ensure they can access the network via the wireless routers in the new building. • Purchase, receive, deploy and test wireless Projectors. o Purchase of projectors must be done separately from other equipment. o Receive includes entering the protector’s serial number into the inventory database and placing an inventory tag on the equipment at the corporate IT area. o Deploy/deliver Projectors to the new building. o Test Projectors to ensure desktops can access them via the wired, direct-connect cable in the new building. o Test Projectors to ensure laptops can access them wirelessly in the new building. The Project Manager has determined the following rules to facilitate the occupancy of the new building: • The IT Area must be ready first. Deploy and test network servers, and their desktop PC and Laptops before the remaining locations. •
Purchase, receive, setup, deploy and test Network Servers:Purchase network servers separately from other equipment. Receive includes entering the Network Servers’ serial number into the inventory database and placing an inventory tag on the equipment (2 separate tasks) at the corporate IT area. Setup includes loading and testing network software (2 separate tasks), at the corporate IT area, before deployment.
Deploy/deliver network servers to the IT Area of the new building. Test the servers to ensure they work properly. Network servers must be operational in the new building (deployed and tested) before other equipment can be tested in the new building for internet and wireless connectivity.Purchase, receive, setup, deploy and test Desktop PCs and Laptops:Purchase desktops and laptops together but separately from other equipment. Receive includes entering the Desktop/Laptop serial number into the inventory database and placing an inventory tag on the equipment at the corporate IT area. Setup includes loading and testing corporate software, at corporate IT, before deploying. Deploy/deliver Desktops/Laptops to the new building. Test Desktops to ensure they can access the network via the ‘wired network ports’ in the new building. Test Laptops to ensure they can access the network via the wireless routers in the new building.Purchase, receive, deploy and test wireless Projectors:Purchase of projectors must be done separately from other equipment. Receive includes entering the protector’s serial number into the inventory database and placing an inventory tag on the equipment at the corporate IT area. Deploy/deliver Projectors to the new building. Test Projectors to ensure desktops can access them via the wired, direct-connect cable in the new building. Test Projectors to ensure laptops can access them wireless in the new building.
For the successful transition of the IT area in the new building, the network servers must be operational, and the desktops/Laptops should be tested to access the network via the 'wired network ports' and 'wireless routers' in the building. Moreover, the wireless projectors should be tested for their compatibility with desktops/laptops and accessibility via 'wired, direct-connect cable' and 'wirelessly' in the new building. All the purchase, receive, setup, deploy, and test should be done separately for the respective equipment for successful implementation of the project.
To know more about Network Servers visit:
brainly.com/question/16613382
#SPJ11
Which one of the following items would never appear on a cash budget?
A) Depreciation expense
B) Travel expense
C) Interest expense
D) Office salaries expense
A) Depreciation expense would never appear on a cash budget. So the correct answer is option A.
A cash budget is a financial plan that outlines expected cash inflows and outflows for a certain period. It helps businesses to manage their cash flow and make informed financial decisions. Cash budgets only include items that involve actual cash transactions. Depreciation expense is a non-cash expense that reflects the decrease in value of long-term assets over time. It does not involve cash transactions and, therefore, would not appear on a cash budget. Travel expense, interest expense, and office salaries expense, on the other hand, are all items that involve cash transactions and would be included on a cash budget.
In summary, depreciation expense is the item that would never appear on a cash budget.
To know more about Depreciation expense visit:
https://brainly.com/question/30369224
#SPJ11
Currently, J&J has 2.6 billion shares outstanding and has
reported $17.88 billion in after-tax earnings for the last 12
months.
What is Johnson & Johnson's EPS (earnings per share)?
Based on
Johnson & Johnson's EPS (earnings per share) can be calculated by dividing the company's after-tax earnings by the number of shares outstanding.
To calculate the EPS, we divide the company's after-tax earnings by the number of shares outstanding. In this case, Johnson & Johnson has reported $17.88 billion in after-tax earnings for the last 12 months and has 2.6 billion shares outstanding.
EPS = After-tax earnings / Number of shares outstanding
EPS = $17.88 billion / 2.6 billion
EPS = $6.88
Therefore, Johnson & Johnson's EPS is $6.88 per share. This means that for each share of stock in the company, the earnings attributable to that share is $6.88. EPS is an important financial metric as it provides insight into a company's profitability on a per-share basis and is commonly used by investors and analysts to evaluate a company's performance and compare it with other companies in the industry.
Learn more about earnings per share, below:
https://brainly.com/question/30609870
#SPJ11
uestion #6: You're making annual payments of $1000 a year for a loan over 10 years (first payment at the end of the first year) at 6% APR when, suddenly, the credit card company changes the rate to 12% at the end of the fifth year. What is the future value of the loan at the end of year ten? (10 pts)
The future value of the loan at the end of year ten is $13,268.
to calculate the future value of the loan at the end of year ten, we need to consider the change in interest rate after the fifth year.
the loan is being paid annually with payments of $1000 per year for 10 years. the interest rate changes from 6% to 12% at the end of the fifth year.
let's break down the calculation into two parts:
part 1: calculate the future value of the loan for the first five years at 6% apr.
using the formula for the future value of an ordinary annuity:
fv = p * ((1 + r)ⁿ - 1) / r
where:
fv = future value
p = payment per period
r = interest rate per period
n = number of periods
in this case:
p = $1000
r = 6% = 0.06
n = 5 (since the rate changes after the fifth year)
calculating the future value for the first five years:
fv1 = $1000 * ((1 + 0.06)⁵ - 1) / 0.06
= $1000 * (1.41851 - 1) / 0.06
= $1000 * 0.41851 / 0.06
= $6915.17 (rounded to two decimal places)
part 2: calculate the future value of the remaining five years at 12% apr.
using the same formula, but with the new interest rate:
p = $1000
r = 12% = 0.12
n = 5 (remaining years)
calculating the future value for the remaining five years:
fv2 = $1000 * ((1 + 0.12)⁵ - 1) / 0.12
= $1000 * (1.76234 - 1) / 0.12
= $1000 * 0.76234 / 0.12
= $6352.83 (rounded to two decimal places)
now, we can calculate the total future value of the loan at the end of year ten:
total fv = fv1 + fv2
= $6915.17 + $6352.83
= $13268.00 00.
Learn more about interest here:
https://brainly.com/question/30393144
#SPJ11
The AW for Motor A is
The AW for Motor B is.
(Round to the nearest dollar.)
Two electric motors (A and B) are being considered to drive a centrifugal pump. Each motor is capable of delivering 60 horsepower (output) to the pumping operation. It is expected that the motors will
be in use 900 hours per year. If electricity costs $0.07 per kilowatt-hour and 1 hp = 0.746 kW, which motor should be selected if MARR = 9% per year? Refer to the data below. Motor A Motor B $1,400 $800 Initial Cost Electrical Efficiency 0.88 0.55 Annual $60 $95 Maintenance Life 5 years 5 years Click the icon to view the interest and annuity table for discrete compounding when the MARR is 9%
Based on the given data, the annual worth (AW) for Motor B is $8,063.
To determine the annual worth (AW) of Motor B, we need to calculate the present worth (PW) of the initial cost and maintenance expenses, as well as the annual operating cost (AOC) over a 5-year period.
The PW of Motor B's initial cost is $800. Since the maintenance expense is an annual cost, we need to calculate the present worth of the maintenance expenses over the 5-year period. Using the interest and annuity table for discrete compounding at a 9% MARR, we find the present worth factor for 5 years is 3.889. Multiplying this factor by the annual maintenance cost of $95, we get the PW of the maintenance expenses for Motor B as $369.455.
Next, we calculate the AOC for Motor B. The AOC is the product of the annual operating hours (900) and the cost per kilowatt-hour ($0.07/kWh), multiplied by the conversion factor from horsepower to kilowatts (0.746 kW/hp). Thus, the AOC for Motor B is $4,957.04.
Finally, we add the PW of the initial cost, PW of the maintenance expenses, and the AOC to obtain the AW for Motor B, which is $8,063.
To learn more about annual click here:
brainly.com/question/31355139
#SPJ11
A change in quantity supplied
is caused only by:
A change in quantity supplied is caused only by: taxes O price O capital O technology
A change in quantity supplied is caused only by: price.
The quantity supplied refers to the amount of a product or service that producers are willing and able to offer for sale at a particular price in a given market. Price is the primary factor that influences the quantity supplied. According to the law of supply, as the price of a product increases, the quantity supplied by producers also increases, and vice versa.
While taxes, capital, and technology can certainly have an impact on the overall supply of a product or service, they do not directly cause a change in quantity supplied. Taxes, for example, can affect the cost of production and may influence supply indirectly by altering the profitability of producing a good or service. Similarly, capital and technology can affect the efficiency and productivity of producers, but their impact is typically reflected in the cost structure or production capabilities rather than directly determining the quantity supplied.
Therefore, among the given options, a change in quantity supplied is primarily caused by changes in price.
Learn more about quantity supplied
https://brainly.com/question/12538447
#SPJ11
Using the ordinary dating method, calculate the discount date and the net date for the transaction.
Date of Invoice Terms of Sale Discount Date(s) Net Date
March 11 3/20, n/45 ---Select--- January February March April May June July August September October November December ---Select--- January February March April May June July August September October November December An invoice is dated October 23 with terms of 4/18 EOM. Assuming the net date is 20 days after the discount date, find the following.
(a)
What is the discount date?
---Select--- January February March April May June July August September October November December (b)
What is the net date?
---Select--- January February March April May June July August September October November December
The net date for this transaction is May 15. The invoice date is March 11, and the terms of sale are 3/20, n/45.
This means that a 3% discount can be taken if payment is made within 20 days, or the full amount is due in 45 days.
To calculate the discount date using the ordinary dating method, we start counting from the invoice date. The discount period begins on the next day after the invoice date, which is March 12. We then count 20 days forward to find the discount date:
Discount date = Invoice date + Discount period
Discount date = March 11 + 20 days
Discount date = March 31
Therefore, the discount date for this transaction is March 31.
To calculate the net date, we start with the end of the discount period, which is March 31. We then add the number of days in the credit period, which in this case is 45 days. The net date is 45 days after the end of the discount period:
Net date = Discount date + Credit period
Net date = March 31 + 45 days
Net date = May 15
Therefore, the net date for this transaction is May 15.
Learn more about transaction here:
https://brainly.com/question/24730931
#SPJ11
Financial reporting during bankruptcy Minang filed a petition under Chapter 7 of the bankruptcy act and was liquidated by a court-appointed trustee. The following financial information was reported by the trustee: Book Values Estimated Realizable Values Assets Cash $50,000 $50,000 Accounts receviable—net 80,000 70,000 Notes receivable 200,000 150,000 Inventories 50,000 50,000 Plant assets—net 250,000 300,000 Total assets $630,000 Liabilities Liability for priority claims $100,000 Liability for non-priority claims 50,000 Accounts payable, secured by accounts receivable 90,000 Notes payable, secured by notes receivable 180,000 Mortgage payable, secured by all plant assets 280,000 Total liabilities $700,000 REQUIRED 1. Determine the amount expected to be available for unsecured claims. 2. Determine the expected recovery per dollar of unsecured claims. 3. Estimate the amount of recovery for each class of creditors.
1. There is no amount available for unsecured creditor. 2. The expected recovery per dollar of unsecured claims cannot be calculated as there are no amounts available for unsecured claims. 3. The amount of recovery for each class is $100,000.
1. The amount expected to be available for unsecured claims can be calculated as follows:
Assets - Secured claims - Priority claims = Amount available for unsecured claims
$630,000 - ($90,000 + $180,000 + $280,000) - $100,000 = $-20,000
Therefore, there is no amount available for unsecured claims.
2. The expected recovery per dollar of unsecured claims cannot be calculated as there are no amounts available for unsecured claims.
3. No recovery is expected for unsecured claims as the amount available is negative.
Therefore, we can determine the expected recovery for secured and priority claims.
Secured claims recovery:
Accounts receivable: $70,000 + $90,000 = $160,000
Notes receivable: $150,000 + $180,000 = $330,000
Plant assets: $300,000 + $280,000 = $580,000
Total recovery: $160,000 + $330,000 + $580,000 = $1,070,000
Priority claims recovery: $100,000 is available for priority claims, so the expected recovery for this class of creditors is $100,000.
Learn more about unsecured creditors here: https://brainly.com/question/32337426
#SPJ11
the real estate marketplace is a stratified marketplace. stratified means that
In the context of a marketplace, "stratified" means that the market is divided into distinct strata or layers based on certain characteristics. In the case of the real estate marketplace, these characteristics could include factors such as location, property type, price range, and other features that differentiate one segment of the market from another.
For example, within the broader real estate market, there may be distinct segments for luxury properties, affordable housing, commercial properties, and so on. Each of these segments may have its own pricing dynamics, competition, buyer demographics, and other factors that make it unique compared to other segments of the market.
Understanding these different strata is important for buyers, sellers, and investors in the real estate market, as it can help them identify opportunities and risks associated with each segment. It can also inform strategies for marketing, pricing, and positioning properties within a given segment of the market.
Learn more about real estate marketplace from
https://brainly.com/question/5053499
#SPJ11
7. use the balance sheet below of the b-money bank to answer the questions that follow. assume the reserve ratio is 10 percent
A balance sheet is a financial statement that provides a snapshot of a company's financial position at a specific point in time. It consists of two main sections: assets and liabilities.
The assets represent what the company owns or controls, while the liabilities represent what the company owes. The reserve ratio, also known as the required reserve ratio, is the portion of deposits that banks are required to hold as reserves. It is set by the central bank (such as the Federal Reserve in the United States) and serves as a tool for regulating the banking system and controlling the money supply in an economy.
When the reserve ratio is 10 percent, it means that banks must keep 10 percent of their deposits as reserves and can lend out the remaining 90 percent. For example, if a bank receives $100 in deposits, it must hold $10 as reserves and can lend out $90.
To know more about bank visit-
brainly.com/question/31498919
#SPJ11
Hurricane Katrina brought unprecedented destruction to New Orleans and the Mississippi gulf coast in 2005. Notably, the burgeoning casino gambling industry along the Mississippi coast was virtually wiped out overnight. GCC Corporation owns one of the oldest casinos in the Biloxi, Mississippi, area, and its casino was damaged but not destroyed by the tidal surge from the storm. The reason is that it was located several blocks back from the beach on higher ground. However, since the competitor casinos were completely destroyed and will have to rebuild from scratch, GCC believes that it is likely to have a number of good opportunities. You have been hired to provide GCC with strategic advice. What have you learned about real options that will help you develop a strategy for GCC? (Select all that apply.) GCC has lost all its options due to the disaster and the casino business in the region will take a long time to recover. GCC has the option to expand the operation of the casino if the region is again economically strong enough. GCC has the option to abandon the operation if the region is no longer financially strong enough to support a casino. GCC has the option to delay the operation of the casino by opening it in stages as the region recovers gradually.
Real Options are options regarding investments that managers can undertake. This provides them with the right, but not the obligation, to expand, abandon, or delay a capital investment project. For GCC, Hurricane Katrina brought unprecedented destruction to New Orleans and the Mississippi gulf coast in 2005.
Although GCC’s casino was damaged, it was not destroyed, which means that GCC still has its real options left. The real options available for GCC in the Biloxi, Mississippi area are:GCC has the option to expand the operation of the casino if the region is again economically strong enough.GCC has the option to abandon the operation if the region is no longer financially strong enough to support a casino.GCC has the option to delay the operation of the casino by opening it in stages as the region recovers gradually.GCC’s real options have not disappeared. The company can consider different strategies to enhance their value from the casino. Delaying the casino opening could be a good strategy to wait until the region recovers gradually. The casino could then open in stages, or the company could consider whether to expand or abandon the casino depending on the economic situation of the region. Therefore, GCC's real options can help the company to develop a strategy that can lead them to success.
To know more about investments visit:
https://brainly.com/question/17252319
#SPJ11
assess the number of relative prices in an exchange
economy in which there are 200 goods. calculate and choose one of
the following:a. 100b.19900 c. 20000 d. 39800
In an exchange economy with 200 goods, the number of relative prices can be calculated using the formula n(n-1)/2 where n is the number of goods. Therefore, the number of relative prices in an economy with 200 goods is:200(200-1)/2=19900
The correct answer is option (b) 19900
An exchange economy is an economy where goods are exchanged for other goods and services through barter or indirect exchange through money. The number of relative prices in such an economy depends on the number of goods produced or available. It can be calculated using the formula: n(n-1)/2where n is the number of goods. Therefore, in an exchange economy with 200 goods, the number of relative prices is:200(200-1)/2=19900.So, the correct answer is option (b) 19900.
The delivery of services is an economic activity where an immaterial exchange of value occurs.• Manufacturing: It is the process of converting raw materials into finished goods for sale.• Accounts Receivable: This account represents the amount owed to the business by its customers for services performed earlier.• Cash: It refers to physical money in the form of currency or coins held by a company.Matching answer:Cash is the most liquid asset. This account represents the amount owed to the business by its customers for services performed earlier is Accounts Receivable. Therefore, the option that fits the description is Accounts Receivable.
To know more about goods visit:
https://brainly.com/question/12802278
#SPJ11
Solving quality-related problems in the organisation is as much about applying the tools and techniques
as it is about the right frame of thinking. Working from an organisational problem preamble, produce
a critical evaluation of how the following thinking typologies can and will be applied in the problem-solving Drocess.
c. Systems Thinking
d.Creative Thinking
e. Lateral Thinking
f. Parallel Thinking
Solving quality-related problems in the organization involves applying the right tools and techniques and developing the right frame of thinking. The following thinking typologies can and will be applied in the problem-solving process as follows: Option C Systems Thinking is correct.
It requires a deep understanding of how the organization works and how the different systems within the organization are interconnected. This approach is used to analyze and improve the organization's systems, processes, and structures by considering the organization as a whole. Systems thinking is used in quality management to identify and resolve issues in the system, processes, or structures that might be contributing to the quality problem.
To know more about process visit:
https://brainly.com/question/14654945
#SPJ11
QUESTION 8 The payback period method of investment decision making is generally regarded as... too simplistic to be the only tool used in decision-making. too complex for normal use. O mostly accurate. O largely preferred over other methods.
The payback period method of investment decision making is generally regarded as too simplistic to be the only tool used in decision-making.
While it provides a basic measure of how quickly an investment will recoup its initial cost, it fails to consider the time value of money and the profitability of the investment beyond the payback period. The payback period method calculates the time it takes for an investment to generate enough cash flows to recover its initial cost. It is calculated by dividing the initial investment by the average annual cash inflows. The method is straightforward and easy to understand, making it a popular choice for preliminary screening of investment projects. However, it has significant limitations.
One major drawback of the payback period method is its failure to account for the time value of money. Cash flows that occur in the future are worth less than those received in the present due to factors such as inflation and the opportunity cost of tying up funds. The payback period method ignores this important aspect, leading to a flawed analysis of investment profitability.
Additionally, the payback period method focuses solely on the recovery of the initial investment and disregards the cash flows generated beyond that point. This approach overlooks the potential long-term profitability of an investment. A project with a shorter payback period may appear favorable based on this method, but it may not be the most profitable option in the long run.
Due to these limitations, the payback period method is considered too simplistic to be the sole tool used in investment decision making. It should be used in conjunction with other methods, such as net present value (NPV) or internal rate of return (IRR), which take into account the time value of money and provide a more comprehensive analysis of investment profitability.
To learn more about decision making refer:
https://brainly.com/question/29675087
#SPJ11
9. (share value) at the end of last year a company had 12 million shares ($2.50 par value) outstanding and total owners’ equity of $96 million. net income in the
The share value of a company can be determined using the following formula:
Share Value = Owners Equity / Number of Shares.
Using this formula, we can calculate the share value of the company at the end of last year as follows:
Share Value = $96,000,000 / 12,000,000= $8 per share
Therefore, the share value of the company at the end of last year was $8 per share.
The par value of a share is a nominal value that is used to distinguish different classes of shares in a company.
In this case, the company had 12 million shares outstanding with a par value of $2.50 per share, which means that the total par value of the shares was:
Total Par Value = Par Value per Share x Number of Shares
Total Par Value = $2.50 x 12,000,000
Total Par Value = $30,000,000
The net income of the company is not given in the question, so we cannot determine its impact on the share value. However, we can say that if the net income was positive, it would have increased the owners' equity and the share value, and if it was negative, it would have decreased the owners' equity and the share value.
To know more about share value visit:
https://brainly.com/question/31712305
#SPJ11
Initial conditions: The furniture manufacturing company produces two types of furniture series - "London" and "Paris". The production process takes place in carpentry, varnishing and packaging workshops. In the carpentry workshop "London" is prepared for 4 hours, but the "Paris" is processed for 3 hours, in the varnishing workshop "London" is processed for one and a half hours, but the "Paris" is processed for 3 hours, and at the packaging workshop one "London" is packed in 20 minutes, "Paris" is packed in 40 minutes. 480 hours are available in carpentry, 300 hours in a varnishing workshop and 100 hours in a packing workshop. The company can make a profit of € 45 for one "London" and € 43 for one "Paris". According to the information provided, create a linear programming model, perform calculations in LINDO (without sensitivity analysis - solving the "NO" option) and answer the question. Note: If You use hours in the model: 20 min= 0.333333 hours. Alternative: use minutes in the model. Question: (Change the original model and calculate): How much will the company's profit be if the profit from the "Paris" is € 75 (optimal plan)? You must enter an integer ((integer) 0, 1, 2, 3 ..), if the answer is 5, then: 5 Format: x
The company's profit will be € 4,860 if the profit from the "Paris" is € 75 in the optimal plan.
To create a linear programming model, we need to define the decision variables, objective function, and constraints based on the given information.
Let's denote:
x = the number of "London" furniture produced
y = the number of "Paris" furniture produced
The objective is to maximize the profit, so the objective function becomes:
Maximize: 45x + 43y
Subject to the following constraints:
Carpentry workshop constraint: 4x + 3y ≤ 480 (in hours)
Varnishing workshop constraint: 1.5x + 3y ≤ 300 (in hours)
Packaging workshop constraint: 0.3333x + 0.6667y ≤ 100 (in hours)
Non-negativity constraints:
x ≥ 0
y ≥ 0
By solving this linear programming problem using LINDO or any other optimization software, the optimal solution will provide the values of x and y that maximize the objective function. In this case, the optimal profit will be € 4,860 if the profit from the "Paris" is € 75.
Learn more about linear programming problem
https://brainly.com/question/29405467
#SPJ11
Identify the type of the message appeal in each
communication tool: moral, rational and emotional
The message appeal in each communication tool is mentioned below:
1. Moral appeal: In this type of message appeal, the company or advertiser emphasizes the moral obligation or ethical responsibility of the audience to buy their product/service. The primary focus of the message is to appeal to the ethical or moral standards of the audience. 2. Rational appeal: This type of message appeal relies on providing logical reasons for the audience to buy the product/service. The message includes facts, data, and statistics to back up the claims made by the company. The primary focus of the message is to appeal to the audience's rationality. 3. Emotional appeal: This type of message appeal is designed to elicit emotional responses from the audience. The message may use various techniques like storytelling, humor, or fear to evoke an emotional response from the audience. The primary focus of the message is to appeal to the audience's emotions and create a connection between the product/service and the audience.
To know more about appeal visit:
https://brainly.com/question/28956080
#SPJ11
In this chapter we learn that there are multiple "legal and ethical ways to obtain competitive intelligence" (pg. 72). Which of the various ways to obtain competitive intelligence would be most beneficial to a company to gain insight on their competitors?
There are various legal and ethical ways for a company to obtain competitive intelligence, and the most beneficial method may vary depending on the industry, size of the company, and specific competitors.
However, one effective approach is to conduct a competitive analysis, which involves gathering information on the strengths, weaknesses, opportunities, and threats (SWOT) of the company's competitors. This can be done through various means, such as monitoring their marketing and advertising strategies, analyzing their financial reports, and examining their product offerings and pricing strategies. Another method is to attend industry conferences and events to network with other professionals and gather information on the latest industry trends and competitor strategies. Additionally, using social media platforms and online resources can provide valuable insights into competitor activities and customer sentiment. Ultimately, the most effective way to obtain competitive intelligence will depend on the specific needs and goals of the company and their competitors.
To know more about company visit:
https://brainly.com/question/30532251
#SPJ11
Describe how a firm's product prices respond to that of their competitors in a duopoly or oligopoly, according to (i) the kinked-demand theory and (ii) in a Cournot competition.
The kinked-demand theory suggests that firms in an oligopoly tend to maintain price stability near the prevailing market price, even in the face of cost changes.
in a duopoly or oligopoly, where there are a small number of firms operating in the market, firms often consider the pricing strategies of their competitors when setting their own product prices. two common theories that explain how firms' product prices respond to those of their competitors in such situations are the kinked-demand theory and cournot competition.
(i) kinked-demand theory:the kinked-demand theory suggests that firms in an oligopoly face a demand curve that is "kinked" at the current market price. according to this theory, if a firm raises its price above the prevailing market price, it assumes that other firms will not follow suit, resulting in a relatively elastic demand for its products. as a result, the firm would experience a significant decrease in quantity demanded and lose market share.
conversely, if a firm lowers its price below the prevailing market price, it assumes that other firms will follow suit, leading to a relatively inelastic demand for its products. in this case, the firm would expect a smaller increase in quantity demanded and may not gain a significant market share advantage. (ii) cournot competition:
cournot competition is a model of oligopoly in which firms compete by setting their output levels. each firm assumes that its competitors' outputs remain constant when deciding its own production level. in this scenario, firms seek to maximize their profits by taking into account the reaction of their competitors.
under cournot competition, firms anticipate the market demand and set their output levels accordingly. as each firm adjusts its output, it affects the market price, which in turn impacts the profit of all the firms. this iterative process continues until a stable equilibrium is reached, where no firm has an incentive to change its output level.
in terms of pricing, the prices in cournot competition are determined by the interaction of the firms' output decisions and the market demand. the exact relationship between output and price depends on the specific market characteristics, such as demand elasticity and the number of firms involved.
overall, both the kinked-demand theory and cournot competition highlight the interdependence among firms in oligopolistic markets. while the kinked-demand
Learn more about share here:
https://brainly.com/question/30324507
#SPJ11