Answer:
The first ionization energy is defined as
Energy which is required to pull out one mole of the outermost shell's electrons in a neutral atom from one mole of gaseous atoms to produce 1 mole of gaseous ions each with a charge of 1+.[tex]A\to A^++ e^{-}[/tex] , where A is any neutral atom.In the periodic table, Its value decreases from top to bottom in groups and increases from left to right across a particular period. Helium has the largest first ionization energy.Francium has one of the lowest.Describe how u would separate a mixture of salt , sand and iodine into different components. please help i will give a brainliest for this . PLEASE HELP?
to remove iodine sublime
to remove sand filter
to remove water evaporate
Explanation:
1. put the mixture in a beaker
2.Heat the mixture using a watch glass filled with cold water, the iodine will sublime at the base of the watch glass.
3.Add water to sand and salt. Stir for salt to diffuse in the water
4.Filter sand from the solution using a filter paper
5.evaporate the remaining water to remain with Salt crystals.
I need a help from this question!!
Answer:
B
Explanation:
Please take a look at the picture attached for the drawings and structures.
C2H4 is a alkene (C-C double bond). When steam (water) is added, it turns into an alcohol, where the double bond breaks and a (-OH) functional group is attached to one of the Carbons. In this case, C2H4 ethene is turned into ethanol.
When an alcohol undergoes oxidation, primary alcohols turn into aldehyde (-CHO) or carboxylic acids (-COOH). Secondary alcohol turns into ketone. Ethanol is a primary alcohol. And since it later reacts with propanol, it can only form carboxylic acid when it oxidizes. The product in this reaction is ethanoic acid.
Carboxylic acid reacts with alcohol to form an ester (-COO-). the -COOH group from acid combines with the -OH group from alcohol to form an ester bond -COO- while eliminating H2O. Therefore, when propanol undergoes esterification with ethanoic acid, propyl ethanoate is produced. It is the answer of B.
Determine the net iconic equation for the following chemical reaction: HCl(aq) + NH4OH(aq)———-> NH4Cl(aq) + H2O(I) Hint: HCl(aq) is strong acid NH4OH(aq) is a weak base
Answer : The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
The given balanced ionic equation will be,
[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]
In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
Which of the following is NOT an indicator of a chemical
reaction?
O A. Breaking into small pieces
OB. Producing a solid
OC. Changing color
OD. Producing light
Answer:OD. Producing light
Explanation:
Consider the equation below.
Zn + H2SO4 → ZnSO4 + H2
The mole ratio of zinc to zinc sulfate is
Answer:
1:1
Explanation:
There is one mole of zinc (Zn) and one mole of zinc sulfate (ZnSO₄).
The mole ratio is 1:1.
Hope this helps.
Answer:
1:1
Explanation:
Need help ASAP!!!! what is the value (angle) for the C=C=O bond in Ketene i.e. CH2=C=O
Answer:
[tex]180^\circ[/tex] by the VSEPR theory.
Explanation:
This question is asking for the bond angle of the [tex]\rm C=C=O[/tex] bond in [tex]\rm H_2C=C=O[/tex]. The VSEPR (valence shell electron pair repulsion) theory could help. Start by considering: how many electron domains are there on the carbon atom between these two bond?
Note that "electron domains" refer to covalent bonds and lone pairs collectively.
Each nonbonding pair (lone pair) of valence electrons counts as one electron domain.Each covalent bond (single bond, double bond, or triple bond) counts as exactly one electron domain.For example, in [tex]\rm H_2C=C=O[/tex], the carbon atom at the center of that [tex]\rm C=C=O[/tex] bond has two electron domains:
This carbon atom has two double bonds: one [tex]\rm C=C[/tex] bond and one [tex]\rm C=O[/tex] bond. Even though these are both double bonds, in VSEPR theory, each of them count only as one electron domain. Keep in mind that there are only four valence electrons in each carbon atom. It can be shown that all four valence electrons of this carbon atom are involved in bonding (two in each of the two double bonds.) Hence, there would be no nonbonding pair around this atom.In VSEPR theory, electron domains around an atom repel each other. As a result, they would spread out (in three dimensions) as far away from each other as possible. When there are only two electron domains around an atom, the two electron domains would form a straight line- with one domain on each side of the central atom. (To visualize, consider the three atoms in this [tex]\rm C=C=O[/tex] bond as three spheres on a stick. The central [tex]\rm C[/tex] atom would be between the other [tex]\rm C[/tex] atom and the [tex]\rm O[/tex] atom.)
This linear geometry corresponds to a bond angle of [tex]180^\circ[/tex].
Name one way chemicals can help the environment
Energy storage and transport. Chemical energy transport.
Answer:
to clean the water
Explanation:
When 12 g of methanol (CH3OH) was treated with excess oxidizing agent (MnO4-), 14 g of formic acid (HCOOH) was obtained. Using the following chemical equation, calculate the percent yield. (The reaction is much more complex than this; please ignore the fact that the charges do not balance.)
3CH3OH + 4MnO4- ----> 3HCOOH + 4MnO2
(a) 100%
(b) 92%
(c) 82%
(d) 70%
(e) 55%
Answer:
(c) 82%
Explanation:
Using the chemical reaction:
3CH₃OH + 4MnO₄⁻ → 3HCOOH + 4MnO₂ + 4e⁻
3 moles of methanol produce 3 moles of formic acid (Reaction 1:1)
To find the percent yield we need to calculate theoretical yield of the reaction when 12g of methanol (Molar mass: 32.04g/mol) are reacting, thus:
12g ₓ (1mol / 32.04g) = 0.3745 moles of methanol are in 12g.
As 1 mole of methanol produce 1 mole of formic acid, assuming a 100% of yield in the reaction (Theoretical yield) moles produced of formic acid are 0.3745 moles.
Using molar mass of formic acid (46.03g/mol), mass of the acid in 0.3745moles are:
0.3745 moles ₓ (46.03g/mol) = 17.2g of formic acid are theoretical yield
Percent yield is calculated as:
(actual yield / Theoretical yield) × 100
As actual yield of the reaction is 14g. Theoretical yield is:
(14g / 17.2g) × 100 = 81.2% ≈ 82%
Right answer is:
(c) 82%The percentage yield of the reaction is 82%
The correct answer to the question is Option C. 82%
We'll begin by writing the balanced equation for the reaction.
3CH₃OH + 4MnO₄⁻ → 3HCOOH + 4MnO₂ + 4e⁻
Molar mass of CH₃OH = 12 + (3×1) + 16 + 1 = 32 g/mol
Mass of CH₃OH from the balanced equation = 3 × 32 = 96 g
Molar mass of HCOOH = 1 + 12 + 16 + 16 + 1 = 46 g/mol
Mass of HCOOH from the balanced equation = 3 × 46 = 138 g
From the balanced equation above,
96 g of CH₃OH reacted to produce 138 g of HCOOH
Next, we shall determine the theoretical yield of HCOOH.From the balanced equation above,
96 g of CH₃OH reacted to produce 138 g of HCOOH.
Therefore,
12 g of CH₃OH will react to produce = (12 × 138)/96 ≈ 17g of HCOOH.
Finally, we shall determine the percentage yield.Actual yield of HCOOH = 14 g
Theoretical yield of HCOOH = 17 g
Percentage yield =?Percentage yield = Actual / Theoretical × 100
Percentage yield = 14/17 × 100
Percentage yield ≈ 82%The correct answer to the question is Option C. 82%
Learn more: https://brainly.com/question/25656650
The proof that ch4 is a weak acid
Answer: because ch4 is not considered a acid they said it is too weak
Explanation:
4.Acrylic fibres are also known as
a)Terry cot
b)Orlon
c)Polyester
d)None of these
Answer:
B
Explanation:
DuPont created the first acrylic fibers in 1941 and trademarked them under the name Orlon.
Anyone know how to answer this?
Answer:
i metal
ii nonmetal
iii metal
iv nonmetal
Explanation:
If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.
Hi does anyone know how to do question 4?
Please show working out thanks.
answer:
a)1.274 g b) 0.013 mole
Explanation:
a) Mass of 1 mol of CuSo4. 5H20=
[tex]63 + 32 + (16 \times 4) + (7 \times 1) + (16 \times 5)[/tex]
=246g
no. moles of CuSo4. 5H2O=
[tex] \frac{mass}{mass \: of \: 1mole} [/tex]
so moles
=
[tex] \frac{3.14}{246} [/tex]
0.013 mole
in the equation
1 mole of sulphuric acid reacts to form 1 mole of CuSo4.5H2O
in other words
0.013 mole of sulphuric acid reacts to form 0.013 mole of CuSo4.5H2O
so mass of 1 mole (Mr) H2So4=
[tex](2 \times 1) + 32 + (16 \times 4)[/tex]
98g
mass of sulphuric acid= mole × mass of 1 mole
so mass= 0.013 × 98
1.274 g
b) In the equation
1 mole of sulphuric acid reacts to form 1 mole of copper(ll) oxide
in other words
0.013 mole of sulphuric acid reacts to form 0.013 mole of copper (ll) oxide
so 0.013 mole of copper(ll) oxide is reacted
Hope it helped and pls mark brainliest
Which will change will cause the gravitational force between a baseball and a soccerball
Calcium (Ca) has an atomic number of 20. It can form an ion by losing 2
electrons. What would its charge be?
A. 18
B. 22
C. 2+
D. 2-
Answer:
2+
Explanation:
Apex lolz
in Analytical chemistry laboratory. Nickle(ppm)in water sample estimated by two different students was as ,student 1 (25 24 24 24 24 28 26 ) and student 2 (24 25 24 24 25 25 ), if the true valude on Nickle in water was 20 ppm estimate the precision and accuracy of both students
Answer:
Answers are in the explanation
Explanation:
Precision and accuracy are both statistical concepts. Precision is about how close are the measured values to each other. Accuracy is closeness of the measured values to a specific value or reference value.
There are many ways to calculate precision and accuracy, one is stimating precision as Relative Uncertainty and accuracy as Relative Error.
Formulas are:
Relative Uncertainty: Standard desviation / Measured value.
Relative Error: Measured Value - Expected Value / Expected value
Measured value is the aveage of the values.
For student 1:
Mean = 25
Standard desviation = 1.5275
Relative Uncertainty: 1.5275 / 25
Relative Uncertainty: 0.061
Relative Error: 25 - 20 / 20
Relative Error: 0.25
For student 2:
Mean = 24.5
Standard desviation = 0.5477
Relative Uncertainty: 0.5477 / 24.5
Relative Uncertainty: 0.02
Relative Error: 24.5 - 20 / 20
Relative Error: 0.225
As the student 2 has a low Relative error and uncertainty, you can say student 2 is more accurate and precise
hurry I'm on a timer
Which term describes erosion?
O creates small particles
O hardens rock fragments
O transports solid materials
O dissolves rock components
Answer:
transports solid materials
Explanation:
Erosion is a process where solid materials are transported by natural forces such as wind or water.
Answer: c
Explanation:
A drug problem can quickly consume A)a small portions of a person income B)the bulk of a person income C)a person excess income
Answer:
b
Explanation:
a drug problem consumes the bulk of a persons income because drugs are expensive to buy
A drug problem can quickly consume the bulk of a person income
What is a drug problem?A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.
Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.
People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.
The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.
The correct answer is option B.
Learn more about drug problem, refer:
https://brainly.com/question/23284149
#SPJ2
How much energy does a 185 nm wave of light have? (The speed of light in a
vacuum is 3.00 x 108 m/s, and Planck's constant is 6.626 x 10-34 Jos.)
A. 1.07 x 10-18 J
B. 8.38 x 1034j
C. 9.31 x 1017 J
D. 3.68 x 10-32 J
O
Answer: A. 1.07 x 10∧ -18 J
Explanation:
The energy can be calculated by using this relation; E = hc / ∧
Where E = energy
h = Planck's constant = 6.626 x 10-34joules
c = speed of light = 3.00 x 10∧8 m/s
∧ = wavelenght = 185 nm = 185 x 10∧ -9m
Therefore; E= hc / ∧
= (6.626 x 10-34 j/s) x ( 3.00 x 10∧8 m/s) / 185 x 10∧ -9m
= 1.987 x 10 ∧ -25 / 185 x 10∧ -9m
= 1.07 x 10∧ -18 J
What are the periodic trends of ionic radii? Check all that apply. Ionic radii tend to increase down a group. Ionic radii tend to decrease across a period. Anionic radii tend to increase across a period. Cationic radii tend to decrease across a period. Ionic radii increase when switching from cations to anions in a period.
Answer:
What are the periodic trends of ionic radii? Check all that apply.
*Ionic radii tend to increase down a group.
Ionic radii tend to decrease across a period.
Anionic radii tend to increase across a period.
*Cationic radii tend to decrease across a period.
*Ionic radii increase when switching from cations to anions in a period.
Answer:
- Ionic Radii Tend To Increase Down A Group.
- Cationic Radii Tend To Decrease Across A Period.
- Ionic Radii Increase When Switching From Cations To Anions In A Period.
Explanation:
i got it correct on edge
When a sample of Mg is combusted in a bomb calorimeter, 25.4 kJ of energy as heat is evolved. The calorimeter contains 7.50 x 102 g of water at an initial temperature of 18.6 °C. The specific heat capacity of water is 4.184 J/gLaTeX: \cdot⋅°C and the heat capacity of the bomb is 8.20 x 102 J/°C. Calculate the final temperature of the water and the bomb
Answer:
x = 25.02 or 25°c
Explanation:
Given:
mass of water : 7.50×10² =750 gm
Ccal = 8.20× 10² = 820 J/°c
Let assume final temp = x°c
then, heat gained by the water + heat gained by calorimeter
= 25400 J
⇒ Mw × Cw× ΔTw+ Ccal ×ΔT = 25400
⇒ 750× 4.184 × (x - 18.6) + 820 ×(x-18.6) = 25400
⇒ x = 25.02 or 25°c
Which refers specifically to a heated solution that holds more dissolved solution than it can hold at a lower temperature? supersaturated undersaturated heterogeneous homogeneous
Answer:
A. Supersaturated
Explanation:
i got it right on edge 2021
The heated solution that holds more dissolved solution than it can hold at a lower temperature is supersaturated solution. Therefore, option A is correct.
What is supersaturated solution ?A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. By introducing a tiny solute crystal known as a seed crystal, the excess dissolved solvent in a super-saturated solution can begin to recrystallize.
A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. A solution is considered supersaturated if it contains more solute than is necessary to saturate it.
A solution that contains more solute than it can hold at a specific temperature is said to be supersaturated. Usually, raising a solution's temperature causes more particles to dissolve, increasing the solute concentration.
Thus, option A is correct.
To learn more about supersaturated solution, follow the link;
https://brainly.com/question/1432936
#SPJ6
How to get a catalyst back at the end of a chemical reaction?
Answer:
You should get the catalyst back already.
Explanation:
A catalyst shouldn't be used up during a chemical reaction. It is used to speed up a reaction, but it shouldn't disappear/be used up by a chemical reaction.
what's love like? what feels are involved?
While camping you light a small campfire, initiating the combustion of wood to produce heat and
light. What can you determine about this reaction?
O A. It is exothermic.
B. The bond making energy is more than 600 kJ.
OC. It is endothermic.
D. The bond breaking energy is more than 600 kJ.
Answer:
A. It is exothermic
Explanation:
Combustion is a chemical reaction in which a substance combines with oxygen present in air to produce carbon (iv) oxide and water as well release heat and light energy.Combustion is an exothermic process.
An exothermic reaction releases energy in the form of heat to the surroundings. The energy required to break bonds in the reactants is less than the energy required to form new bonds in the products in an exothermic reaction.
From the given options;
A. It is exothermic is determinable since the reaction is a combustion reaction
B. The bond making energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather it is composed of various substances.
C. It is endothermic. is wrong because combustion of wood is exothermic.
D. The bond breaking energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather is composed of many substances.
How do you find the amount of electrons for any element?
Answer:
If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron
Explanation:
Answer:
We can find the amount of electrons through its Atomic number and with the help of electronic configuration
is a process that involves the collection of information and ideas supported by evidence.
Science
Systematics
Pseudoscience
Hypothesis
Answer:
pseudoscience
Explanation:
srry that this is so late btw, hope this helps...
Answer:
Science
Explanation:
First response is NOT correct
Based on the law of Conservation of Mass, what happens to the mass of a substance in a chemical change? A: the mass is always conserved B: The mass is either created or destroyed C: the reactant always has more mass D: the product always has more mass
Answer:
A.
Explanation:
The amount of mass always stays the same, matter cannot be created nor destroyed, it can only change forms. Thus, the answer is A.
In a chemical reaction the total mass of all the substances taking part in the reaction remains the same. Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction.
I hope this helps..
A. If both Assertion & Reason are true and the reason is the correct explanation of the assertion. B. If both Assertion & Reason are true but the reason is not the correct explanation of the assertion. C. If Assertion is true statement but Reason is false. D. If Assertion is false and Reason is true i Assertion: .Burning of magnesium ribbon produce whitish powder called magnesium oxide. Reason : Magnesium is generally cleaned by rubbing it on sand paper
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Answer:
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Explanation:
Which of the following describes what happens in a chemical reaction?
O A. Molecules change from one phase to another.
B. Molecules dissolved in solution are separated again.
O c. Chemical bonds are broken, and new ones are formed.
O D. Molecules mix without rearranging atoms.
Answer:
c. Chemical bonds are broken, and new ones are formed.
Explanation:
Hope this helps. :)
In a chemical reaction, chemical bonds are broken, and new ones are formed.
What is a chemical reaction?Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical reactions:
1) inorganic reactions
2)organic reactions
3) biochemical reactions
During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical reactions,here:
https://brainly.com/question/29762834
#SPJ2
Which missing item would complete this beta decay reaction?
Answer:
The answer is option A.Hope this helps you