Answer:
hope this helps
Explanation:
72
(b) The student collects the H2(g) produced by the reaction and measures its volume over water at 298 K after carefully
equalizing the water levels inside and outside the gas-collection tube, as shown in the diagram below. The volume is
measured to be 45.6 mL. The atmospheric pressure in the lab is measured as 765 torr, and the equilibrium vapor pressure
of water at 298 K is 24 torr,
45
46
Gas
Water
Calculate the following.
() The number of moles of h2 produced in the reaction
Answer:
The pressure of H₂(g) = 741 torr
Explanation:
Given that:
The atmospheric pressure measured in the lab = 765 torr
The vapor pressure of water = 24 torr
By applying Dalton's Law of Partial Pressure :
Making The Pressure inside the tube due to the H₂(g) the subject of the formula :
we have:
= (765 -24) torr
= 741 torr
According to ideal gas law and Dalton's law of partial pressure, 0.0136 moles of hydrogen are produced in the reaction.
What is ideal gas law?The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.It is applicable to ideal gases which have hypothetical existence.Law was proposed by Benoit Paul Emile Clapeyron.
In the given problem, according to Dalton's law of partial pressure, pressure =765-24=741 torr
Substituting the given values in the ideal gas equation, n=PV/RT
n=741×45.6×10[tex]^-3[/tex]/8.314×298=0.0136 moles.
Thus 0.0136 moles of hydrogen are produced in the reaction.
Learn more about ideal gas law,here:
https://brainly.com/question/28257995
#SPJ5
Five different substances added breakers of water. Each substance begins as a white, solid powder. Which substances do not dissolve in water? Salt,sugar,starch,chalk, and bakeing powder
Answer:
Chalk is does not dissolve in water
Explanation:
i had the same question as you
Find a part of the article that describes signals that are sent within Diego’s body. Where does the signal come from, and how does it cause Diego to feel or react?
Answer:
The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
What are sensory receptor?The capacity to react to stimuli is one of the traits of a living thing. The highly developed sensory system of humans can concurrently analyze thousands of incoming messages.
Dendrites of sensory neurons are specialized for receiving particular types of stimuli and are known as sensory receptors. There are three ways to classify sensory receptors.
Exteroceptors are located at or close to the skin's surface and are responsive to stimuli coming from the outside or the body's surface. These receptors include those for vision, hearing, smell, and taste as well as those for touch, pain, and temperature.
Therefore, The sensory receptors send signals to Diego's brain cells. These signals are messages that help Diego figure out what to do next. As Diego thinks, more signals move from one brain cell to another.
To learn more about sensory receptors, refer to the link:
https://brainly.com/question/3190796
#SPJ2
How many formula units make up 10.2 g of magnesium chloride (MgCl2)?
Answer:
6.46×10²² formula units
Explanation:
From the question given above, the following data were obtained:
Mass of MgCl₂ = 10.2 g
Number of formula units =?
From Avogadro's hypothesis,
1 mole of MgCl₂ = 6.02×10²³ formula units
But,
1 mole of MgCl₂ = 24 + (35.5×2) = 24 + 71 = 95 g
Thus, we can say:
95 g of MgCl₂ = 6.02×10²³ formula units
Finally, we shall determine the formula units in 10.2 g MgCl₂. This can be obtained as follow:
95 g of MgCl₂ = 6.02×10²³ formula units
Therefore,
10.2 g of MgCl₂ = (10.2 × 6.02×10²³) / 95
10.2 g of MgCl₂ = 6.46×10²² formula units
Thus, 10.2 g of MgCl₂ contains 6.46×10²² formula units
What is the mass of 500 trillion (5.0 x 10'4)
molecules of water?
Which of the following is an example of water in its gas state?
1. A puddle
2. Water vapor
3. A glacier
4. A cloud
To make some oatmeal, Sally combined 40 grams of oatmeal, 10 grams of maple syrup, and some warm water. If the combined mass was 100 grams, how much water did she add?
ANSWER THIS EMEDIATLY PLEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEAAAAAAAAAASE
thank you
(ps.this is the closest subject to science (that deals with volume, mass, and matter you know that kind of stuff )that I could find
2) Calculate the percent composition of each element in Mgso,
3) Calculate the percentage of each element in Ag,o.
Answer:
2)
[tex]\% Mg=20.2\%\\\\\% S=26.6\%\\\\\% O=53.2\%[/tex]
3)
[tex]\% Ag=93.1\%\\\\\% O=6.9\%[/tex]
Explanation:
Hello!
2) In this case, since magnesium sulfate is MgSO₄, we can see how magnesium weights 24.305 g/mol, sulfur 32.06 g/mol and oxygen 64.00 g/mol as there is one atom of magnesium as well as sulfur but four oxygen atoms for a total of g/mol; thus the percent compositions are:
[tex]\% Mg=\frac{24.305}{120.36 } *100\%=20.2\%\\\\\% S=\frac{32.06}{120.36 } *100\%=26.6\%\\\\\% O=\frac{64.00}{120.36 } *100\%=53.2\%[/tex]
3) In this case, although the element seems to contain Ag and O, we infer its molecular formula is Ag₂O; thus, since we have two silver atoms weighing 215.74 g/mol and one oxygen atom weighing 16.00 g/mol for a total of 231.74 g/mol, we obtain the following percent compositions:
[tex]\% Ag=\frac{215.74}{231.74} *100\%=93.1\%\\\\\% O=\frac{16.00}{231.74} *100\%=6.9\%[/tex]
Best regards!
oil has a density of 8.5kg/L. what is the volume of 5.4kg oil
Answer:
0.64 L
Explanation:
Step 1: Given data
Density of oil (ρ): 8.5 kg/LMass of oil (m): 5.4 kgVolume of oil (V): ?Step 2: Calculate the volume corresponding to 5.4 kg of oil
Density is an intrinsic property and it is equal to the quotient between the mass and the volume.
ρ = m/V
V = m/ρ
V = 5.4 kg/(8.5 kg/L) = 0.64 L
Generally, atmospheric pressure decreases by 1.00 mmHg as
altitude increases 10.0 m. If altitude increases 100. m, how
much would the atmospheric pressure change in atm?
Answer:
-0.0132 atm
Explanation:
Step 1: Calculate the atmospheric pressure change if altitude increases 100. m
Atmospheric pressure decreases by 1.00 mmHg as altitude increases 10.0 m. The decrease in pressure when the altitude increases 100. m is:
100. m × (-1.00 mmHg/10.0 m) = -10.0 mmHg
Step 2: Convert "-10.0 mmHg" to atm
We will use the conversion factor 1 atm = 760 mmHg.
-10.0 mmHg × 1 atm/760 mmHg = -0.0132 atm
what changes chemical energy to something you can use
based on the law of conservation of energy its it atoms hold by strong chemical bonds
After you set up your apparatus for the second part of the experiment, your group begins to add the textbooks on top of the plunger. It appears that the plunger continues to drop with every added book and does not return to its original place after the books are removed. What possible sources of error could be given for this experimental outcome? Be specific and give at least two reasons.
The possible sources of error that could be given for this experimental outcome is the change in the density of the air.
What is an experiment?An experiment simply means the procedure that is carried out in order to refute a particular hypothesis. It should be noted that experiments are important to provide insights into the cause and effect of a particular situation.
In this situation, with every added book, the volume of that air column will reduce. It is just important that the temperature should remain constant when the gas compression is taking place.
Another source of error is the assumption of moles that was assumed was constant during the experiment. In this scenario, it's possible that some gas could have escaped while the compression was taking place.
Learn more about experiments on:
brainly.com/question/17274244
#SPJ1
PLEASE HELP ME!!! i have no idea how to answer these!
Answer: Im answering this for points
DONT COME ON MY STUFF SAYING THAT I GOT SCHOOL TO DO JUST LIKE YOU AND YOUR GIVING ME IRRELEVANT ANWSERS JUST TO GET POINTS? THATS A WASTE OF MY TIME
Explanation:
Zinc metal reacts with copper sulfate through the following
reaction:
Zn + CuSO4 → Cu + ZnSO4
The percent yield for a reaction in which 32.5 g of Zn is reacted
in excess CuSO4 solution is 85.0 %. What is the actual yield of
copper of this reaction?
g
Answer:26.9
Explanation:
A substance that dissolves in a solvent is said to be a(n)
A. immiscible
B. miscible
C. soluble
D. insoluble
Answer:
C. soluble
Explanation:
Remember that a substance that dissolves in a solvent is said to be soluble in that solvent. A substance that does not dissolve in a solvent is insoluble. Process of Dissolving: Solvent particles surround solute particles to form a solution in a process called solvation.
The volume of a gas is 18.6 L at 0.10 atm and 273 K. Calculate the pressure in
atms of the gas if its volume is changed to 1000 ml while the temperature remains
constant?
Answer:
1.86 atm
Explanation:
The following data were obtained from the question:
Initial volume (V₁) = 18.6 L
Initial pressure (P₁) = 0.10 atm
Final volume (V₂) = 1000 mL
Final pressure (P₂) =?
NOTE: The temperature is constant.
Next, we shall convert 1000 mL to L.
1000 mL = 1 L
Finally, we shall determine the final pressure of the gas as follow:
Initial volume (V₁) = 18.6 L
Initial pressure (P₁) = 0.10 atm
Final volume (V₂) = 1 L
Final pressure (P₂) =?
P₁V₁ = P₂V₂
18.6 × 0.10 = P₂ × 1
1.86 = P₂
P₂ = 1.86 atm
Thus, the final pressure of the gas is 1.86 atm
Rocks are classified as sedimentary, metamorphic, or igneous on the basis of
the
a. age of the rocks.
b. way the rocks were formed.
c. types of fossils the rocks contain.
d. number of minerals found in the rocks.
The water cycle is a necessary process that moves water through an ecosystem. The part of the water cycle when water vapor changes back into a liquid in the atmosphere and begins forming clouds is called
A. condensation
B. transpiration
C. evaporation
D. precipitation
Answer:
A
Explanation:
Help help help !!!!!!
Answer:
3. 116.5 V
4. 119.6 V
Explanation:
3. Determination of the voltage.
Resistance (R) = 25 Ω
Current (I) = 4.66 A
Voltage (V) =?
V = IR
V = 4.66 × 25
V = 116.5 V
Thus, the voltage is 116.5 V
4. Determination of the voltage.
Current (I) = 9.80 A
Resistance (R) = 12.2 Ω
Voltage (V) =?
V = IR
V = 9.80 × 12.2
V = 119.6 V
Thus, the voltage is 119.6 V
True or False: The specialized cells in a UNICELLULAR organism perform
specialized jobs.
Your answer
Answer:
True
Explanation:
hellpppppppp me pleaseeeeeeeee
what element is this?????/
Answer:
Helium
Explanation:
Answer:
the element is helium as it's mass number is 4 and number of electrons is equal to it's atomic no. which is 2
Rocks are classified as sedimentary, metamorphic, or igneous on the basis of
the
a. age of the rocks.
b. way the rocks were formed.
c. types of fossils the rocks contain.
d. number of minerals found in the rocks.
Where are new volcanoes in the Hawaiian island chain forming
Answer:
The Hawaiian Islands are a very small section of a huge chain of volcanic islands that crosses the northern half of the Pacific Ocean, called the Hawaiian-Emperor Volcanic Island Chain, which is over 6,000 kilometres long. The chain is linear, with a large bend in the middle: the southern half is called the Hawaiian Ridge and the northern half is called the Imperial Seamount.
Explanation:
Balance equation mg3n2+h2so4=mgso4+(nh4)2
Answer:
Mg₃N₂ + 4 H₂SO₄ ⇒ 3 MgSO₄ + (NH₄)₂SO₄
Explanation:
To balance an equation, you need to make both sides of the equation have equal number of each element. Also, I think that you didn't write the whole equation since the reaction you gave is not likely.
Mg₃N₂ + 4 H₂SO₄ ⇒ 3 MgSO₄ + (NH₄)₂SO₄
You are given 127 g H2CO3 (Carbonic Acid) and a volume of 800 mL of water, what will the final concentration of your solution be? (The final unit is the Molar (M), but do not include it.) (Round to 3 decimal places.)
Answer:
2.562
Explanation:
First we convert 127 g of H₂CO₃ to moles, using its molar mass:
127 g ÷ 62 g/mol = 2.05 mol H₂CO₃Then we convert 800 mL to L:
800 mL / 1000 = 0.800 LFinally we can calculate the concentration of the solution as molarity:
molarity = moles / litersmolarity = 2.05 mol / 0.800 L = 2.562 MWhich of the following is a true statement?
A. Erosion due to wind-blown sand is a process of chemical weathering.
B. due to wind-blown sand is a process of geological weathering.
C. Erosion due to wind-blown sand is a process of biological weathering.
D.Erosion due to wind-blown sand is a process of mechanical weathering.
Answer:
C
Explanation:
Wind is geological therefore it is geological weathering
What is the final volume?
Answer:
Option A. 9.4 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 8 L
Initial temperature (T₁) = 293 K
Final temperature (T₂) = 343 K
Final volume (V₂) =?
V₁ / T₁ = V₂ / T₂
8 / 293 = V₂ / 343
Cross multiply
293 × V₂ = 8 × 343
293 × V₂ = 2744
Divide both side by 293
V₂ = 2744 / 293
V₂ = 9.4 L
Therefore, the final volume of the gas is 9.4 L
Analysis: Consider Joe's story. IF the test shows he does have Marfan syndrome, and if he inherited the Marfan gene from his mother, does this mean that his brother and sister also have it? You may want to draw up a Punnett Square or drawing to help you explain your answer. HINT: Is there any suggestion that he got a Marfan gene from his father?
We inherit genes from our biological parents in specific ways. One way is called autosomal dominant inheritance.
What is autosomal dominant inheritance?
Autosomal dominant inheritance means that the gene in question is located on one of the autosomes. These are numbered pairs of chromosomes, 1 through 22. (These chromosomes do not determine an offspring's gender.) Dominant means that only one gene from one parent is necessary to pass down a trait or a disorder. When a parent has a dominant trait or disorder, there is a 50 percent chance that any child he or she has will also inherit the trait or disorder:
Genetic illustration demonstrating autosomal dominant inheritance
Click Image to Enlarge
What is Marfan syndrome?
Marfan syndrome occurs in one of 5,000 live births. It is a connective tissue disorder associated with autosomal dominant inheritance. Connective tissue is abundant in the body and is important as a supporting structure. It is especially important for the musculoskeletal system. It also provides support for other body systems as well, including the eyes and the heart. The gene for Marfan syndrome is called fibrillin-1. This gene is localized to chromosome #15 on the long arm (q) at 15q21.1.
Common findings in individuals with Marfan syndrome include those related to connective tissue disorders. These include abnormal enlargement of the aortic root of the heart, dislocated lenses of the eyes, and a tall, lanky body with increased joint mobility, scoliosis, long flat feet, and long fingers. Findings may vary among individuals diagnosed with this condition, even within a family.
If an individual carries an abnormal gene for Marfan syndrome, that individual has a 50 percent risk of passing down the disorder to each future offspring. If a person does not carry the gene abnormality, then the risk for occurrence of the disorder in future offspring is the same as for the general population.
Explanation:
How many formula units make up 25.8g of magnesium chloride (MgCl2)? Express the number of formula units numerically.
Answer:
Explanation:
Kandndkjwnww
Predict the product of the following Wittig reaction: You may want to draw out the reaction of a separate piece of paper before submitting your response. 2-butanone reacts with (C2H5O)2P=O--CHC.Hs with added heat in a potassium salt solution
a) Potassium diethyl phosphate
b) (z)-stilbene
c) 2-methylbut-1-enyl-benzene
d) 2-methylbutene diethyl phosphate
Answer:
c) 2-methylbut-1-enyl-benzene
Explanation:
From the information given:
Wittig reaction is essential for the creation of carbon-carbon bonds which results in the production of alkenes. The presence of the ketone compound ( 2-butanone) is because of its high electrophilic character of the carbonyl carbon. The reaction between 2-butanone with triethylamine in the presence of potassium salt is to catalyze the reaction. This reaction proceeds to yield the product 2-methylbut-1-enyl-benzene.