Find the net force and acceleration. 10 points. Will give brainliest.

Answer:

Energy is stored in the bonds between atoms

Answer:

Energy is stored in the bonds between atoms

Explanation:

Ape-x

Answer:

Explanation:

  Work done by force applied = force x displacement

= 10 x 2 = 20 J

Negative work done by frictional force

= μ mg x d where μ is coefficient of kinetic friction , m is mass and d is displacement

= - .18 x 4.5 x 9.8 x 2

= - 15.87 J

Net positive work done on the mass = 4.13 J

If v was the initial velocity

increase in kinetic energy = positive work done on mass

= 1 / 2 m v² - 1/2 m u² = 4.13 where v is final and u is initial velocity

1 /2 x 4.5 x 2 ² - 1/2 x 4.5 u² = 4.13

9 - 2.25 u² = 4.13

2.25 u² = 4.87

u² = 2.16

u = 1.47 m /s .

Explanation:

A concave meniscus,(normally seen) occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.

Answer:

there are differences between concave and convex menuscus

Explanation:

A concave meniscus, which is what you normally will see, occurs when the molecules of the liquid are attracted to those of the container. This occurs with water and a glass tube. A convex meniscus occurs when the molecules have a stronger attraction to each other than to the container, as with mercury and glass.

Answer:

The basic principle on which the electric iron works is that when a current is passed through a piece of wire, the wire heats up. This heat is distributed to the sole (base) plate of the electric iron through conduction.

Answer:

≅50°

Explanation:

We have a bullet flying through the air with only gravity pulling it down, so let's use one of our kinematic equations:

Δx=V₀t+at²/2

And since we're using Δx, V₀ should really be the initial velocity in the x-direction. So:

Δx=(V₀cosθ)t+at²/2

Now luckily we are given everything we need to solve (or you found the info before posting here):

With that we can plug the values in to get:

[tex]760=(87)(cos\theta )(13.6)+\frac{(0)(13.6^{2}) }{2}[/tex]

[tex]760=(1183.2)(cos\theta)[/tex]

[tex]cos\theta=\frac{760}{1183.2}[/tex]

[tex]\theta=cos^{-1}(\frac{760}{1183.2})\approx50^{o}[/tex]

Answer:

acceleration due to gravity = 9.8m/s^2

universal gravitational constant= 6.67×10 ^_11 nm^2 kg_2

now, ratio=9.8/6.67×10^_11.

◦•●◉✿hello friend ur answer✿◉●•◦

◦•●◉✿What does E mc2 actually mean?

E = mc2. It's the world's most famous equation, but what does it really mean? "Energy equals mass times the speed of light squared." On the most basic level, the equation says that energy and mass (matter) are interchangeable; they are different forms of the same thing.✿◉●•◦

Explanation:

∑τ = Iα

(6 N) (0.80 m) = I (0.5 rad/s²)

I = 9.6 kg m²

Answer:

No, the coil will produce no flow of current or potential difference.

Explanation:

Magnetic field flux is the number of magnetic field line passing through a given area. It depends on the area and the magnetic field strength through this area. For electromagnetic induction to occur, there must be a constantly changing magnetic field. This is according to Faraday's law of electromagnetic induction that states that the induced EMF is directly proportional to the rate of change in flux ΔФ/Δt, and is also proportional to the number of turns on the coil. A changing magnetic field will lead to a break in the flux linkage, which induces current or potential difference on the coil. A stationary coil through a magnetic filed will therefore produce no electric flow of current or potential difference on the coil.

Answer:

El conductor no puede evitar el choque.

Explanation:

Primero, convierta la velocidad del conductor a m / s:

1 km/h = 0.277778 m/s

126 km/h = 126 * 0.277778 = 35 m/s

La velocidad del automóvil es de 35 m / s.

El conductor presiona los frenos con una aceleración de -3.5 m / s² para evitar un choque a 150 m por delante.

Veamos qué distancia se moverá el automóvil después de que comience a desacelerar.

Utilizaremos una de las ecuaciones de movimiento lineal de Newton:

[tex]v^2 = u^2 + 2as[/tex]

donde v = velocidad final = 0 m / s (el automóvil debe detenerse)

u = velocidad inicial = 35 m / s

a = aceleración = -3.5 m / s².

s = distancia recorrida

Por lo tanto:

[tex]0 = 35^2 + (2 * -3.5 * s)\\\\=> 1225 = 7.0s\\\\s = 1225 / 7 = 175 m[/tex]

Esto significa que el automóvil se detendrá a 175 m.

Por lo tanto, a esa velocidad y aceleración, el conductor chocará contra el árbol caído porque el automóvil no podrá detenerse antes de alcanzar la posición del árbol.

Answer: A) 45.5N b) 34.6N

Explanation:

Given the following :

Mass of block A(m1) = 5kg

Mass of block B (m2) = 6kg

Angle of incline (Θ) = 45°

Force pulling the down the incline = m1×a×sinΘ

Tension (T) = (m2×a) - (m2)×g

Where g = acceleration due to gravity

a = acceleration

Net force = (5×9.8×sin45°) - (6×9.8)

Net force = 34.648232 - 58.8

The net force acting on the body = 24.4N

Therefore,

Acceleration, a = Net force/ total mass

a = 24.4 / (6+5)

a = 2.22ms^-2

T = (m2 ×g) - (m2×a)

T = (6 × 9.8) - (6 × 2.22)

T = 58.8 - 13.32

T = 45.48

T = 45.5N

B) Normal reaction:

Horizontal component:

m1gCosΘ = 5 × 9.8 × cos45°

= 5 × 9.8 × 0.7071067

= 34.648232

= 34.6N

The tension on the string is 45.62N and the normal force is 34.65N

Data;

Taking the two mass into consideration

for the 6kg mass

[tex]6g - 6a[/tex]

for the 5kg mass

[tex]5gsin45 + 5a\\[/tex]

Equating the tension in both equations

[tex]6g - 6a = 5gsin45 + 5a[/tex]

Let's solve for a

[tex]6a + 5a = 6g - 5gsin45\\11a = 6g - 5gsin45\\a = \frac{6g - 5gsin45}{11}\\ a = \frac{6* 9.8 - 5*9.8*sin45}{11}\\ a = 2.1956 m/s^2\\T = 6g - 6a\\T = 6*9.8 - 6*2.1956\\T = 45.62N[/tex]

b)

The normal force on the 5kg block.

The normal force on the 5kg block can be calculated as

[tex]N = 5 * 9.8 cos 45 = 34.65N[/tex]

The tension on the string is 45.62N and the normal force is 34.65N

Learn more on tension and normal force here;

https://brainly.com/question/24994188

Answer:

The not alligator side.

Obviously the middle, both sides will be shallow, so the middle will most likely  be the deepest part.

Explanation:

Answer: 477W

Explanation:

Given the following :

Mass (m) = 7.3kg

Initial Velocity (u) = 0

Final velocity (v) = 14m/s

time (t) = 1.5s

Power = workdone (W) / time (t)

The workdone can be calculated as the change in kinetic energy (KE) :

Recall ;

KE = 0.5mv^2

Therefore, change in KE is given by:

0.5mv^2 - 0.5mu^2

Change in KE = 0.5(7.3)(14^2) - 0.5(7.3)(0^2)

Change in KE = 715.4J

Therefore ;

Average power = Workdone / time

Workdone = change in KE = 715.4N

Average power = 715.4 / 1.5

Average power = 476.93333 W

= 477W

Answer:

125 KPa

Explanation:

Data obtained from the question include:

Initial pressure (P1) = 100 KPa

Initial temperature (T1) = 298 K

Final temperature (T2) = 100°C = 100°C + 273 = 373 K

Final pressure (P2) =..?

Since the volume of the container is fixed, the final pressure in the container can be obtained as follow:

P1/T1 = P2/T2

100/298 = P2/373

Cross multiply

298 x P2 = 100 x 373

Divide both side by 298

P2 = (100 x 373) / 298

P2 = 125.2 ≈ 125 KPa

Therefore, the final pressure in the container is approximately 125 KPa.

[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]

Actually Welcome to the Concept of the Kinematics.

so here we get as,

V^2 = U^2 + 2as

so here, a = -0.2 m/s^2

(0.1)^2 = (0.3)^2 + (-0.2)(s)

=> 0.01 = 0.09 - 0.2s

=> 0.2s = 0.08

=> s = 0.08/0.2

=> s = 0.4 m

Answer:

A change of direction that light undergoes when it enters a medium with a different density from the one through which it has been traveling.

Answer:

the fact or phenomenon of light radio waves etc being deflected in passing obliquely through the interface between one ,medium and another or through a medium of varying density

Explanation:

Answer:

see explanations below

Explanation:

At the point when the car leaves the track, the reaction on the road is zero, meaning that the centrifugal force equals the gravitation force, namely

mv^2/r = mg

Solve for v in SI units

v^2 = gr = 9.81 m/s^2 * 14.2 m = 139.302 m^2/s^2

v = sqrt(139.302) = 11.8 m/s

Answer: at 11.8 m/s (26.4 mph) car will leave the track.

Starting from rest, the disc completes [tex]\theta[/tex] revolutions after [tex]t[/tex] seconds according to

[tex]\theta=\dfrac\alpha2t^2[/tex]

with angular acceleration [tex]\alpha[/tex]. It completes 10 rev in 2 s, which means

[tex]10\,\mathrm{rev}=\dfrac\alpha2(2\,\mathrm s)^2\implies\alpha=5\dfrac{\rm rev}{\mathrm s^2}[/tex]

Find the time it takes to complete 20 rev with this acceleration:

[tex]20\,\mathrm{rev}=\dfrac12\left(5\dfrac{\rm rev}{\mathrm s^2}\right)t^2\implies t=\sqrt8\,\mathrm s\approx2.83\,\mathrm s[/tex]

so it takes approximately 0.83 s to complete 10 more rev.

Answer:

In vector form , if angle between velocity vector and acceleration vector is less than 90° and greater than 0° then it is positive acceleration and if it is less than 180° and greater than 90° then it is negative acceleration. If there is no acceleration vector then it is called zero acceleration

Explanation:

Answer:

The acceleration is positive when it's in the same direction as that of velocity. It keeps on increasing the velocity. In this case, velocity is not constant.

The acceleration is negative when it is in the direction opposite to that of velocity. It keeps on decreasing the speed of body.

The acceleration is zero when the body moves with a constant velocity in any particular direction.

Answer:

C) 1 and 4

Explanation:

Least count is .01 m . If one measures any number between 100 and 99 , it will be like 99.25 or 99.37 m . So number of significant figure will be 4 ( maximum )

The least one can measure is .01 so least number of significant figure possible is 1 .

Answer:

Like forces are the forces that are parallel to each other and have the same direction. Unlike forces are the forces that parallel yet have directions inverse to each other.

hope this helps :)

Answer:

Like Parallel forces are the forces that are parallel to each other and have the same direction. Unlike parallel forces are the forces that parallel yet have directions inverse to each other

Explanation:

When an object is moving at a constant velocity, the acceleration of the object is zero because the change in the velocity of the object is zero.

Acceleration is defined as the change in velocity per change in time of motion.

The acceleration of an object is calculated as;

[tex]a = \frac{\Delta v}{\Delta t } = \frac{v_2 - v_1}{t_2 - t_1}[/tex]

When an object is moving at a constant velocity, the change in the velocity of the object is zero.

[tex]v_2 = v_1\\\\a = \frac{v_2 - v_1}{t_2 -t_1} = \frac{v_2 - v_2}{t_2 -t_1} = 0[/tex]

Thus, we can conclude that when an object is moving at a constant velocity, the acceleration of the object is zero because the change in the velocity of the object is zero.

Learn more here:https://brainly.com/question/19004094

Answer:

Electronic Configuration is the distribution of electrons in sub shells (s,p,d,f).

For Example,

The electronic configuration of Carbon (6 electrons) is [tex]1s^22s^22p^2[/tex]

Answer:

Fuel cells are used in the space shuttle as one component of the electrical power system. ... The fuel cell power plants generate heat and water as by-products of electrical power generation. The excess heat is directed to fuel cell heat exchangers, where the excess heat is rejected to Freon coolant loops

Answer:

d = 96 meters

Explanation:

a = acceleration

t = time

d = distance

[tex]d = \frac{1}{2} \times a \times {t}^{2} [/tex]

[tex]d = \frac{1}{2} \times 3 \times {8}^{2} [/tex]

[tex]d = 96[/tex]

Answer:

F_f = 370.636 N

Explanation:

We are given;

co-effficient of static friction;μ = 0.62

mass of the object;m = 61 kg

acceleration due to gravity;g = 9.8 m/s²

The maximum force of static friction is given by the formula:

F_f = μmg

Plugging in the relevant values, we have;

F_f = 0.62 × 61 × 9.8

F_f = 370.636 N

Now, we are told that a horizontal force of 272 N in the negative x direction to try and move.

Since the Frictional force exceeds this horizontal force, it means the Fridge is not going to move and would require a greater force

Answer:

3.02x10^-5

Explanation:

A scientific notation consists of

c x 10^n

the c must be a number between 1-9, while n must be an integer.

it indicates the c being multiplied by the nth power of 10.

From 0.0000302, we need to move the decimal to after 3 so that 3.02 can be a number between 1-9. When moving the decimal point to the right side, each digit moved counts as -1 power of 10.

So, to give 3.02, we need to move the decimal by 5 digits. hence, we can conclude n = -5.

0.0000302 = 3.02x10^-5

Answer:

ε = -0.0589V = -58.9mV

Explanation:

In order to calculate the induced emf in the coil, you use the following formula:

[tex]\epsilon=-N\frac{d\Phi_B}{dt}=-N\frac{d(SBcos\alpha)}{dt}[/tex]         (1)

ε: induced emf = ?

N: turns of the coil = 28

ФB: magnetic flux trough the coil

S: cross sectional area of the circular coil = π.r^2

r: radius of the cross sectional area of the coil = 4.40cm = 0.044m

B: magnetic field

α: angle between the direction of the magnetic field and the direction of the normal to the cross area of the coil = 0°

You take into account that the area is constant respect to the magnetic field that cross it. Only the magnetic field is changing with time. The magnetic field depends on time as follow:

[tex]B(t)=0.010t+0.040t^2[/tex]           (2)

You replace the expression (2) into the equation (1), evaluate the derivative, and replace the values of the other parameters for t =4.20s:

[tex]\epsilon=-NS\frac{dB}{dt}=-NS\frac{d}{dt}[0.010t+0.040t^2]\\\\\epsilon(t)=-NS(0.010+0.080t)\\\\\epsilon(t)=-(28)(\pi(0.044m)^2)(0.010T/s+0.080T/s^2(4.20s))\\\\\epsilon(t)=-0.0589V=-58.9mV[/tex]

The induced emf in the coil is -58.9mV

Answer:

a) velocity - time realation

that graph's gradient gives the uniform acceleration

Answer:

Refracted rays travel through a boundary into a new medium.

Explanation:

Refracted rays travel through a boundary into a new medium. is only true for refraction.

The angle of incidence is the same for angle of refraction, is not true for refraction. Refraction follows Snell's law, states that ratio of the sine of the angle of refraction and the sine of the angle of incidence is always constant and equivalent to the ratio of phase velocities of the two mediums it is passing through.

Refracted rays change direction and go back to the original medium is false for refraction however, it is true for reflection.