Run the Ford-Fulkerson method and take the residual graph into consideration. In the residual graph, identify the collection of vertices that may be reached from the source. Minimum cut edges are all edges that connect a reachable vertex to an unreachable vertex. Write down all such edges.
What is a vertex?A vertex is a corner point formed by the junction of an object's edges, faces, or facets, and it can be a polygon, polyhedron, or any higher-dimensional polytope. If the internal angle of the polygon—the angle produced by the two edges at the vertices with the polygon inside the angle
In general, a polyhedron or polytope vertex is convex if the intersection with a suitably small sphere centered at the vertex is convex and concave otherwise.
The edge with the highest weight in a spanning tree is called a bottleneck edge. If there isn't a spanning tree with a smaller bottleneck edge weight in the graph, the tree is a minimum bottleneck spanning tree. A comparable issue is known as Minimum Bottleneck Spanning Arborescence for directed graphs (MBSA).
Therefore, All edges connect a reachable vertex to an unreachable vertex. Write down all such edges.
Learn more about vertex here:
https://brainly.com/question/29030495
#SPJ1
Which network layer protocol is used if a host without an ip address tries to obtain an ip address.
The network layer protocol, which is used if a host without an IP address tries to obtain an IP address, is The Dynamic Host Configuration Protocol (DHCP).
Since, it is a client/server protocol that automatically provides an Internet Protocol (IP) host with its IP address and other related configuration information, such as subnet mask and default gateway.
Advantages of the dynamic host configuration protocolDHCP can be complex to configure and maintain: DHCP requires a certain level of technical expertise to set up and maintain, including knowledge of IP addressing, subnetting, and DNS.DHCP requires additional network resources: requires a DHCP server and additional network resources to function properly.DHCP can be vulnerable to security threats: DHCP can be a security risk if not configured properly, as it can allow malicious users to gain access to your network.DHCP can cause IP address conflicts If two devices on a network are assigned the same IP address, it can cause conflicts and network outages.Learn more about The Dynamic Host Configuration Protocol:
https://brainly.com/question/14234787
#SPJ4
(20) connecting math to programming choose one from the following two projects (if you have experience writing computer programs, please do the first one, otherwise, do the second one). you can look at solutions online to get ideas, but the work you turn in must be your own.
Using knowledge in computational language in C++ it is possible to write a code that connecting math to programming choose one from the following two projects.
Writting the code:#include<stdio.h>
long factorial(int n)
{
if (n == 0)
return 1;
else
return(n * factorial(n-1));aa
}
void main()
{
int number;
long fact;
printf("Enter a number: ");
scanf("%d", &number);
fact = factorial(number);
printf("Factorial of %d is %ld\n", number, fact);
return 0;
}
How do you find the factorial return of a number?Factorial of a positive integer (number) is the sum of multiplication of all the integers smaller than that positive integer. For example, factorial of 5 is 5 * 4 * 3 * 2 * 1 which equals to 120.
See more about C++ at brainly.com/question/12975450
#SPJ1
you administer a netbios-based network that uses the tcp/ip protocol. you are trying to troubleshoot a computer that is unable to contact a server by its netbios name. which command can you use to check the connection?
We can use nbtstat command to check the connection. in order to trying to troubleshoot a computer that is unable to contact a server by its netbios name.
A straightforward yet sophisticated command-line tool for tracing an IP packet's travel across one or more networks is called traceroute. The Windows implementation, known as "tracert," was initially created for UNIX-based platforms but is now present in most operating systems. One of the most popular networking tools for analyzing network issues is the ping command. The ping command can be used to check whether a networking device—typically a computer—on a network is accessible.
Learn more about operating here-
https://brainly.com/question/18095291
#SPJ4
A forensics analyst is attempting a live acquisition of the contents of the memory of a running Linux device. In order to copy the blocked /dev/mem file with memdump or dd, the analyst must install a kernel driver. Recommend a framework that will enable the analyst to install a kernel driver.
Linux requires a small amount of RAM compared to other modern operating systems. You should have at least 8 MB, even though having at least 16 MB is highly recommended.
What memory of a running Linux device?To find out how much memory the computer has, run the Linux command cat /proc/meminfo. This command makes the data contained in the /proc directory's meminfo file available for viewing.
Therefore, MemTotal, which is given in the sample in bold, denotes the total amount of memory that will be exposed. The more RAM you have, the faster the system will work.
Learn more about Linux device here:
https://brainly.com/question/28502677
#SPJ1
Paulo is working on the Access report, as shown below.
What is the first step that he should follow in order to show only the records for items that were sold for more than $1.99?
a. He should select the Price Paid field and right-click on it, then choose Number Filters.
b. He should go to the Design tab, click on Group and Sort, then click the Price Paid field.
c. He should go to the Arrange tab, click on Group and Sort, then choose Number Filters.
d. He should select the Price Paid field and highlight it, then click on the Filter tab.
The first step that he should follow in order to show only the records for items that were sold for more than $1.99 is option a. He should select the Price Paid field and right-click on it, then choose Number Filters.
How do I select numbers to filter in Excel?By choosing Data > Filter. Choose Text Filters or Number Filters before choosing a comparison, such as Between. After entering your filter criteria, click "OK."
Note that In the Sort & Filter group on the Data tab, select Filter, A list with filter options will appear when you click the arrow in the column header. Note Microsoft Excel shows either Text Filters or Number Filters in the list depending on the kind of data in the column.
Therefore, Filter by Selection: To use the datasheet view filter to select all the rows in a table that have a value that corresponds to the value that has been chosen in a particular row. To filter on multiple fields in a form or datasheet, or if you're looking for a specific record, use the "filter by form" option.
Learn more about Filters from
https://brainly.com/question/3198358
#SPJ1
Insurance brokerage company uses a computer-based method of estimating the losses its clients will suffer if a severe storm or earthquake occurs. This method of estimating losses is called.
Answer:
catastrophe modeling
Explanation:
the 4gl languages that enable nonprogrammers to use certain easily understood commands to search and generate reports from a database are called
The 4gl languages that enable nonprogrammers to use certain easily understood commands to search and generate reports from a database are called querry.
A compiler transforms a procedural language program written by a programmer, known as the source code, into an object code written in machine language. The 4GL languages known as Query allow nonprogrammers to search databases and generate reports using a few simple, clearly understood instructions.
A database management system (DBMS), the software that manages data, responds to information requests from queries in a database. Users can run a query to add or remove data from a database or to obtain data from the database. In response to a query, the database's many tables typically return data. When a user receives a query response, they can choose how rationally to use the data. For instance, a human resources manager might run a database search to determine the number of workers who are qualified for benefits during a particular company's enrollment period.
To know more about database click here:
https://brainly.com/question/29412324
#SPJ4
question 2 according to the mccandless method, what is the most effective way to first present a data visualization to an audience?
The McCandless Method states that introducing the graphic by name is the most effective way to introduce a data visualization to an audience.
What is Data visualization?
The practice of conversion of information into the visual context, such as a map or a graph, to make data easier to understand and comprehend and extract useful insights from.
The primary goal of data visualization is to facilitate the identification of patterns, trends, and outliers in large data sets. The term like information visualization, information graphics and statistical graphics are oftenly frequently used interchangeably.
Data visualization is one of the important steps in the data science process which states that data must be visualized after it has been collected, processed, and modeled in order for conclusions to be drawn.
Data visualization is also part of the larger data presentation architecture (DPA) discipline, which seeks to identify, locate, manipulate, format, and deliver data in the most efficient manner possible.
To knoow more about Data visualization, visit: https://brainly.com/question/10028221
#SPJ4
Which is developed during the process of technological design?solutionexperimentconclusionsummary.
SOLUTION is the developed during the process of the said technological design.
What is the need of Technological design?
When there is a need to solve or find a solution to a specific or identified problem, a technological design is frequently used. The technological design process is frequently required in order to develop technologically driven products capable of solving a perceived problem.
The steps are as follows:
Identifying the problem at hand, conducting additional and thorough research on it, and proposing potential solutions from which the best approach is chosen. The solution is then modeled, the model is tested, and refinements are made based on the results of the test. Testing will have to be repeated as the model is refined before the final outcut is communicated.To know more about Technological design, visit: https://brainly.com/question/18129233
#SPJ4
You can use the Object Dependencies dialog box of the Management Studio to do all but one of the following. Which one is it?a.Review the stored procedures and views that depend on a specific tableb.Review the stored procedures and views that a specific table depends onc.Review the tables that a specific table depends ond.Review the tables that depend on a specific table
The one, it is to review the stored procedures and views that a specific table depends on. The correct option is b.
What is a dialog box?A program can build a temporary window called a dialogue box to collect user input. Typically, dialogue boxes are used by applications to ask the user for further details on menu items.
A dialogue box is a tiny window that a program opens to ask the user for input. For instance, Word will open a dialogue box asking you to name the file and specify where to save it if you click the Save icon while the document hasn't yet been given a name.
Therefore, the correct option is b, review the stored procedures and views that a specific table depends on.
To learn more about dialog box, refer to the link:
https://brainly.com/question/28445405
#SPJ1
question 9 ieee 802.15 adopted protocols are those protocols developed by other standards groups that are used with the bt protocol stack to ensure interoperability to other devices or networks. true false
IEEE802.15 adopted protocols are those protocols developed by other standards groups that are used with the bt protocol stack to ensure interoperability to other devices or networks is true.
What are protocols?Protocols are defined as a collection of guidelines or instructions for sending data between electrical gadgets, such computers. Regardless of any variations in their internal processes, structures, or designs, it enables connected devices to interact with one another.
The IEEE 802 standards committee's IEEE 802.15 working group, which defines wireless personal area network (WPAN) standards, is an organization of electrical and electronic engineers (IEEE). There are ten main sectors of development, however not all of them are in progress.
Thus, IEEE802.15 adopted protocols are those protocols developed by other standards groups that are used with the bt protocol stack to ensure interoperability to other devices or networks is true.
To learn more about protocols, refer to the link below:
https://brainly.com/question/27581708
#SPJ1
Write a program that asks for the names of three runners and the time it took each of them to finish a race. The program should display who came in first, second, and third place. Think about how many test cases are needed to verify that your problem works correctly. (That is, how many different finish orders are possible?) Input Validation: Only allow the program to accept positive numbers for the times.
Sort list in C++ and determines the player's position at the end of the race. Output image of the algorithm is attached.
C++ Code#include<iostream>
using namespace std;
int main() {
// Define variables string frstn, thrdn, scondn;int frstp, scondp, thrdp, x ;
string nam[3];
int pos[3];
// Entry datado {
for (x=1;x<=3;x++) {
cout << "Runner " << x << endl;
cout << "Name: ";
cin >> nam[x-1];
cout << "Time it took to finish the race (min): ";
do {
cin >> pos[x-1];
} while (pos[x-1]<=0);
}
} while (!((pos[2]!=pos[1]) && (pos[2]!=pos[0]) && (pos[1]!=pos[0])));
// Identify who came in first positionif ((pos[0]<pos[1]) && (pos[0]<pos[2])) {
frstn = nam[0];
frstp = pos[0];
}
if ((pos[1]<pos[2]) && (pos[1]<pos[0])) {
frstn = nam[1];
frstp = pos[1];
}
if ((pos[2]<pos[1]) && (pos[2]<pos[0])) {
frstn = nam[2];
frstp = pos[2];
}
// Identify who came in last positionif ((pos[0]>pos[1]) && (pos[0]>pos[2])) {
thrdn = nam[0];
thrdp = pos[0];
}
if ((pos[1]>pos[2]) && (pos[1]>pos[0])) {
thrdn = nam[1];
thrdp = pos[1];
}
if ((pos[2]>pos[1]) && (pos[2]>pos[0])) {
thrdn = nam[2];
thrdp = pos[2];
}
// Identify who came in second positionfor (x=1;x<=3;x++) {
if ((pos[x-1]!=frstp) && (pos[x-1]!=thrdp)) {
scondn = nam[x-1];
}
}
// Outputcout << "First position: " << frstn << endl;
cout << "Second position:: " << scondn << endl;
cout << "Third position: " << thrdn << endl;
return 0;
}
To learn more about sort lists in c++ see: https://brainly.com/question/15834729
#SPJ4
This method takes a list of strings called list. Implement it so that it returns the total number of vowels ('a', 'e', 'i', 'o', and 'u') in all strings in the list.For example, given ["ear", "prune", "plot", "try"], it should return 5.
In Java, a string is a series of characters, and char is a single digit used to store variables. In Java, the char takes up two bytes. BufferedReader and InputStreamReader are used in Java to read user input from the keyboard. Then readLine() is called to read a line. In Java, the java.io package provides input and output via data streams, serialization, and the file system.
Coding Part:
/*
Iterative Java program for counting the number of vowels in a string
*/
import java.io.*;
public class vowel {
public static void main(String[] args)
throws IOException
{
String str = "Brainly.com";
str = str.toLowerCase();
int count = 0;
for (int i_01 = 0; i_01 < str.length(); i_01++) {
// check if char[i] is vowel
if (str.charAt(i) == 'a' || str.charAt(i) == 'e'
|| str.charAt(i) == 'i'
|| str.charAt(i) == 'o'
|| str.charAt(i) == 'u') {
// char[i]
count++;
}
}
// show the total number of vowels in the string
System.out.println(
"Total number of vowels in the given string are: " + count);
}
}
To learn more about Iteration in Java, visit: https://brainly.com/question/14523631
#SPJ4
marco travels often and does not have consistent wireless internet service. he frequently uses his mobile phone service to provide internet access to his tablet. which network type is marco using?
Macro is using the PAN network type.
Define the PAN network.
An individual's workspace can be connected to a computer network called a personal area network (PAN) by connecting electronic devices. Between devices like computers, smartphones, tablets, and PDAs, a PAN enables data transmission. PANs can be utilized for inter-device communication as well as for connecting to higher level networks and the Internet, with one master device acting as the gateway. A PAN can operate wirelessly or over wired interfaces like USB. A PAN carried over a cheap, short-distance wireless network technology, such as IrDA, Wireless USB, Bluetooth, or ZigBee, is known as a wireless personal area network (WPAN). A WPAN's range can be anywhere between a few centimetres and a few metres.
PAN is a type of network that often only covers a limited space, like a room. In contrast to LAN, which uses a network to connect computers over short distances, such as those found within a single building or a single computer lab with multiple computers, eales computing devices communicate with other adjacent computers and share information and data.
To learn more about personal area network, use the link given
https://brainly.com/question/14704303
#SPJ4
TRUE/FALSE. If you use the const modifier in a function declaration, you do not include it in the function definition.
Answer:
False
Explanation:
before continuing, look at the bits. what do you think is encoded? how different are the bits in different areas of the bitstring?
It is impossible to figure out what these bits mean unless a method for decoding them is developed. They could be an ASCII-encoded message, a Peerless Fabio Twins save file, or a portion of an image.
They could be any of these or others. Assuming they are ASCII, mapping each set of eight is simple; simply convert them from one encoding to another.
What is Encoding?
Encoding is the process of converting data into a format that is required for a variety of information processing needs, such as:
Compilation and execution of a programTransmission, storage, and compression/decompression of dataFile conversion is an example of application data processing.Encoding can take two forms:
Encoding is the process of applying a specific code, such as letters, symbols, and numbers, to data in order to convert it into an equivalent cipher.Encoding in electronics refers to analog-to-digital conversion.To learm more about Encoding, visit: https://brainly.com/question/27178394
#SPJ4
a malicious person is performing a technique called anti-forensics on a target network to hide evidence of an intrusion and conceal implanted rootkits and other malware. what is one action that might be taken when this method is used?
Answer:
Overwriting metadata
Explanation:
This is because the most appropriate technique that the attacker uses in a anti forensic is Overwriting the metadata, as this conceals all the previous activities that have been done by the attacker to hide the anti forensic.
A cell phone provider charges $69. 99 per month for unlimited phone calls plus 5 cents per text message. Which of these is the correct number sentence to describe the cost of the cell phone usage for 6 months and 350 text messages each of those months?.
The equation that is described the text is b. $69.99×6 + ($0.05 x 350 x 6) = $524.94. To determine the amount of value of the cell phone usage we can use linear equation.
Linear equation is equations of the first order. The linear equation is explained for lines in the coordinate system.
From the scenario, we know that a cell phone provider charges $69. 99 per month, plus 5 cents per text message. we convert 5 percent, then it will be 0.05. The cell phone is used for 6 months and 350 texts, then to calculate the total cost it can be written as below:
$69.99×6 + ($0.05 x 350 x 6) = $524.94
The option is missing. Here the complete option:
a $69.99 + ($0.05 x 350 x 6) = $174.99
b $69.99×6 + ($0.05 x 350 x 6) = $524.94
c $69.99×6 + ($0.5 x 350 x 6) = $1469.94
d $69.99 + ($0.05 x 350) = $87.49
Learn more about linear equation at https://brainly.com/question/11897796
#SPJ4
which cryptocurrency shares features with a previous cryptocurrency but is technologically enhanced?
Answer: Bitcoin Cash
Explanation:
In the short-run, if P < ATC, a perfectly competitive firm should increase production to the output level at which P = ATC. continue producing at a loss. shut down. continue producing at a profit. There is not enough information to answer the question.
Answer:
P = ATC. continue producing at a loss. shut down. continue producing at a profit. There is not enough information to answer the question.:
Malicious code that secretly watches your computer activity and sends the information over the internet.
Spyware can secretly capture your keystrokes (including passwords) and can compromise your identity.
Spyware
Spyware is generally understood to be harmful software intended to infiltrate your computer system, collect information about you, and send it to a third party against your will.
Legitimate software that tracks your data for business purposes like advertising is also referred to as spyware. Malware is computer software that has been installed without the user's permission and carries out evil tasks, such stealing passwords or cash. Malware can be found in many different ways, but the most popular is to scan the computer for dangerous programs or files. Any code in any component of a software system or script that is intended to have undesirable effects, compromise system security, or otherwise cause harm to a system is referred to as malicious code.
Learn more about system here-
https://brainly.com/question/14253652
#SPJ4
Network engineers have the option of using software to configure and control the network rather than relying on individual static configuration files that are located on each network device.
Which of the following is a relatively new technology that allows network and security professionals to use software to manage, control, and make changes to a network?
Software-defined networking (SDN)
TRUE. Network engineers have the option of using software to configure and control the network rather than relying on individual static configuration files that are located on each network device. SDN (Software-defined networking) is a relatively new technology that allows network and security professionals to use software to manage , control, and make changes to a network.
About Software-defined networking (SDN)SDN is a method or paradigm that separates the Control Plane and the Forwarding Plane. On traditional networks or non-SDN networks, the two functions above are in the same device. The Control Plane itself is the function of setting or controlling a network device, while the Forwarding Plane is the function of sending information packets.
If we quote the term from the SDxCentral Control Plane, we can liken it to a "brain" that manages data traffic, while the Forwarding Plane can be likened to a "muscle" which only functions to send packets to the destination according to the brain's request. So that even network settings are easier by using SDN
Facts and Needs of SDN Virtualization and Cloud: Hybrid network components and entities – between physical bare metal and virtual ones Orchestration and Scalability: The ability to orchestrate and manage thousands of devices through a single point of management Programmability and Automation: Ability to change network behavior and to be able to make these changes automatically (for example, troubleshooting capabilities, policy changes, etc.) Visibility: The ability to be able to monitor the network, both in terms of resources, connectivity and others. Performance: Ability to maximize the use of network devices, for example bandwidth optimization, load balancing, traffic engineering and others (related to Programmability and Scalability)Learn more about SDN at https://brainly.com/question/11058708.
#SPJ4
Who is Visiting Wolfieland? (8 points) You are the proud owner of Wolfieland, once the most popular amusement park in New York. But due to fierce competition from other parks, Wolfieland's revenues are starting to decline. You want to get a better idea of who your customers are, and so you start collecting age information about your customers each day. Complete the funcion age_dist, which takes a list of customer ages and returns a dictionary that counts how many customers in a given day fall into the age brackets 1-9, 10-19, 20-29, 30-39, ..., 70-79, 80 and up. Store the age demographics in a dictionary, in which the keys represent the age ranges, and the values represent the counts for those ranges. Specifically,• the key is mapped to the number of customers in the range 1-9 • the key 1 is mapped to the number of customers in the range 10-19 • the key 2 is mapped to the number of customers in the range 20-29 • the key 7 is mapped to the number of customers in the range 70-79 • the key 8 is mapped to the number of customers in the range 80 and up Do not create a key for an age range if the count for that age range is 0.
Wolfieland, once New York's most well-liked amusement park, is proudly owned by you. However, Wolfieland's sales are beginning to fall as a result of the intense competition from rival parks.
Possibly not permanently, but you never know, wolves are hibernating. However, you may read more about our fantastic two years on the site's reviews page. Additionally, keep an eye out for the current bands by Wolfie members Get Crucial, Xup, Fanfarlo, and Kasms!
On the radio, Wolfie! John Kennedy has aired our music on Xfm (104.9fm) at least twice already. This is his playlist. A few days before Christmas, Wolfie performed live on Resonance (104.4 fm) with Shimmy Rivers And And Canal. We even gave a brief performance of Wendy Wack a cappella.
Last month, Delia wrote about us in "Delia's Diary" in Artrocker magazine, and we received another mention in NME.
To know more about playlist click here:
https://brainly.com/question/15686223
#SPJ4
you suspect that cache poisoning or spoofing has occurred on your network. users are complaining of strange web results and being redirected to undesirable sites. which log would help you determine what's going on?
A recovery facility known as a "cold site" may have electricity attached, but it lacks servers and high-speed data links.
For the majority of organizations, a cold site does not provide an adequate path to recovery. A full live mirror of the main site is known as a hot site. A network breach attempt by malicious actors is deterred by the deterrent control type. The likelihood that someone will attempt decreases as more deterrents are put in place. One of the most challenging logs to interpret is the one from a web server. However, you can determine the precise time and location of user logins using these logs. Logs of authentication are crucial to the security of a network.
Learn more about server here-
https://brainly.com/question/14253652
#SPJ4
felicia is a network engineer deploying a virtual private network (vpn) solution. the vpn operates using secure shell (ssh). when asked by a new helpdesk tech about which layer of the osi model it employs, how does felicia answer?
Answer: 7
Felicia is a network engineer deploying a virtual private network (VPN) solution. The VPN operates using Secure Shell (SSH).
SSH refers both to the cryptographic network protocol and to the suite of utilities that implement that protocol. SSH uses the client-server model, connecting a Secure Shell client application, which is the end where the session is displayed, with an SSH server, which is the end where the session runs. SSH implementations often include support for application protocols used for terminal emulation or file transfers.
Present in all data centers, SSH ships by default with every Unix, Linux and Mac server. SSH connections have been used to secure many different types of communications between a local machine and a remote host, including secure remote access to resources, remote execution of commands, delivery of software patches, and updates and other administrative or management tasks.
To know more about VPN , click here:
https://brainly.in/question/6988355
#SPJ4
which encryption method in bitlocker prevents attackers from accessing data by booting from another os or placing the hard drive in another computer?
An encryption method in BitLocker which prevents attackers from accessing data by booting from another OS or placing the hard drive in another computer is: D. Full disk encryption.
What is encryption?In Computer technology, an encryption can be defined as a form of cryptography and it is a process that typically involves converting or encoding information in plain text into a code, known as a ciphertext.
Generally speaking, an information or data that has been encrypted can only be accessed and deciphered by an authorized user who has the right private or public key, depending on the encryption technique.
In Computer programming, some examples of encryption algorithms with a private or public key include the following:
3DESAESRC4RC5RSAIn conclusion, full disk encryption (FDE) is used in BitLocker to prevent attackers from accessing user data by booting from another operating system (OS).
Read more on encryption here: brainly.com/question/9979590
#SPJ1
Complete Question:
Which encryption method in BitLocker prevents attackers from accessing data by booting from another OS or placing the hard drive in another computer?
Filesystem cryptography
Blockchain
GNU privacy guard
Full disk encryption
you are using a device that does not have onedrive installed. you need to get access to some of the files in your onedrive account. which option would you use?
Answer:
If you can sign in to OneDrive online, but not on your computer, check for updates. If your computer is up to date, reset OneDrive. Resetting Microsoft OneDrive can sometimes resolve sync issues and resets all OneDrive settings. OneDrive will perform a full sync after the reset.
Explanation:
She then says: in situations such as this one, could you use the concat function to add strings together to create new text strings?
In situations such as the given one, it is possible to use the 'CONCAT' function to add or join strings together to create new text strings.
According to the scenario when your interviewer explains that one of their customers is an online retailer that has a vast amount of inventory. They have a list of items by name, size, and color. They have another list containing the price of each time by their size - a larger item sometimes has more cost. The stakeholder needs one list of all items by name, size, color, and price. The 'CONCAT' function is suitable in this context that combines/concatenates the text from multiple strings to create new strings.
"
Complete question:
Your interviewer explains that one of their clients is an online retailer that has a vast inventory. She has a list of items by name, color, and size. then, she has another list of the price of each time by size, as a larger item sometimes costs more. The stakeholder need one list of all items by name, color, size, and price.
She then says: in situations such as this one, could you use the Concat function to add strings together to create new text strings?
"
You can learn more about CONCAT function at
https://brainly.com/question/29497042
#SPJ4
A setting that automatically updates related records when a primary record is updated is called ______________ updates.
A setting that automatically updates related records when a primary record is updated is called cascaded updates.
What is a primary key?In database management system (DBMS), a primary key can be defined as a field whose value uniquely identifies each record in a table or relational database. For instance, [EmployeeID] is an example of a primary key because it serves as the unique identifier of the Employee table.
In Computer technology, a primary key is simply used as a unique identifier of each record in a table or relational database in database management system (DBMS), and when it is updated automatically through cascaded updates, the foreign key value within the child table records would be automatically update as well.
Read more on primary key here: brainly.com/question/8131854
#SPJ1
this very slow wired technology uses the phone line; an inexpensive isp subscription should be the only additional cost, but you cannot connect to the internet and use your phone on the same line simultaneously.
Wireless wide area network (WWAN) technology is exemplified by Wi-Fi.
Computers, tablets, cellphones, and other devices can be connected to the internet using Wi-Fi.
Wi-Fi is a radio signal that is transmitted from a wireless router to a device nearby and converted into data you can see and use. The gadget sends a radio signal back to the router, which is wired or cabled into the internet.
Simply put, a Wi-Fi network is a wireless router that distributes an internet connection to a number of devices in a house or office. The router serves as a hub to distribute internet signal to all of your Wi-Fi enabled devices and is directly connected to your internet modem. As long as you're in your network's coverage area, this allows you the freedom to continue being online.
To know more about Wi-Fi click here:
https://brainly.com/question/13267388
#SPJ4