Find the L.C.M and H.C.F of 2^4 x 5^3 x 7^2, 2^2 x 3^5 x 7^2, 2^5 x 5^2 x 7^2

The height of students in statistics in Fall 2004 is distributed with a mean of 67 inches and a standard deviation of 2 inches. The most common height is 67 inches, followed by 65 inches and 68 inches.

The tally sheet shows that the most common height is 67 inches, with 7 students. This is followed by 65 inches and 68 inches, with 6 students each. The least common height is 60 inches, with 1 student.

The frequency distribution table shows that the absolute frequency of each height is the same as the tally sheet. The relative frequency of each height is calculated by dividing the absolute frequency by the total number of students, which is 20. The percentage distribution of each height is calculated by multiplying the relative frequency by 100%.

The histogram shows the distribution of the data in a graphical form. The frequency polygon is a line graph that connects the midpoints of the tops of the bars in the histogram.

The cumulative distribution shows the percentage of students who are less than or equal to a certain height. The percentiles show the percentage of students who are equal to or less than a certain height.

To learn more about mean click here: brainly.com/question/31101410

#SPJ11

:Part (i) The given scenario is as follows: There are altogether 12 students staying in a residential apartment.

Out of these students, 5 like classical music, 8 like rock music and 10 like either classical music or rock music or both. Suppose w = number of students who like only classical music, * = number of students who like both classical and rock music, y = number of students who like only rock music, and 2 = number of students who do not like music.

The required system of four linear equations is given below:

[tex]w + * = 5 * + y = 8 w + * + y = 10 w + * + y + 2 = 12[/tex]

Part (ii) The augmented matrix form for the above system of four linear equations is as follows:[1 1 0 0 | 5][0 1 1 0 | 8][1 1 1 0 | 10][1 1 1 1 | 12]Part (iii) Row echelon form of the augmented matrix is given below:[1 1 0 0 | 5][0 1 1 0 | 8][0 0 1 0 | 2][0 0 0 1 | 2]Part (iv) The reduced row-echelon form of the given augmented matrix is as follows:[1 0 0 0 | 3][0 1 0 0 | 3][0 0 1 0 | 2][0 0 0 1 | 2]Part (v) Based on the results obtained in part (iv), we can conclude that:w = 3, x = 3, y = 2, and z = 2.

To solve this problem, we first need to write a system of four linear equations based on the given scenario. Then, we need to write the system of linear equations in augmented matrix form. Next, we simplify the augmented matrix into a row echelon matrix and then reduce it to its reduced row echelon matrix form. Based on the result from the reduced row echelon matrix, we can obtain the values of w, x, y, and z. Therefore, the values of w, x, y, and z are 3, 3, 2, and 2, respectively.

Thus, the required system of four linear equations is given by w + * = 5, * + y = 8, w + * + y = 10, and w + * + y + 2 = 12. We then convert this system of equations into augmented matrix form, simplify it into a row echelon matrix, and reduce it to its reduced row echelon matrix form. Based on the results obtained from the reduced row echelon matrix, we can conclude that w = 3, x = 3, y = 2, and z = 2.

To know more about matrix visit:

brainly.com/question/28180105

#SPJ11

3 is one of the roots of the given polynomial. The other 2 roots being -2 + 2i√2 and -2 - 2i√2.

We need to find its roots.  Step 1: Find out if 3 is a root of ƒ(X). If 3 is a root of ƒ(X), then ƒ(3) = 0. Let's see if 3 is a root of ƒ(X). ƒ(3) = (3)³ + (3)² - 36= 27 + 9 - 36= 0. Therefore, 3 is a root of ƒ(X).

Step 2: Find the other two roots. Let us perform the synthetic division with the root (X - 3) on the polynomial ƒ(X). By synthetic division, we get the quotient of ƒ(X)/(X - 3) to be X² + 4X + 12, which is a quadratic equation. We can solve this using the quadratic formula. The quadratic formula is, X = [-b ± sqrt(b² - 4ac)] / 2a. Let's substitute the values for a, b, and c from the quadratic equation we got above, which is, X² + 4X + 12= 0 a = 1, b = 4 and c = 12. Using the quadratic formula, X = [-4 ± sqrt(4² - 4(1)(12))] / 2*1 = [-4 ± sqrt(16 - 48)] / 2= [-4 ± sqrt(-32)] / 2 = -2 ± 2i√2.

Thus, the roots of the polynomial ƒ(X) = X³+X²-36 are:3, -2 + 2i√2 and -2 - 2i√2.

To know more about the roots of polynomials: https://brainly.com/question/2833285

#SPJ11

The solution of the given initial value problem, 2xy−9x²+(2y+x²+1)dy/dx=0, y(0)=−3, using exact equations is 6y(x² + 2y + 1)e^(3y²+cy) + e^(3y²+cy)(x² - 18x) = C, where C is a constant.

Given the initial value problem, 2xy − 9x² + (2y + x² + 1) dy/dx = 0, y(0) = -3, using exact equations. To solve the above initial value problem, we need to check whether it is an exact differential equation or not. Then we need to use integrating factor to make it exact if it is not exact. Let us check the given initial value problem whether it is exact or not. Using the given equation 2xy − 9x² + (2y + x² + 1) dy/dx = 0Rearrange the given equation to obtain, M(x,y)dx + N(x,y)dy = 0where M(x,y) = 2xy - 9x² and N(x,y) = 2y + x² + 1Differentiate M(x,y) w.r.t y and differentiate N(x,y) w.r.t x to get ∂M/∂y = 2x and ∂N/∂x = 2xBut ∂M/∂y ≠ ∂N/∂x. So the given initial value problem is not exact. To make the given initial value problem exact, we need to use the integrating factor. To find the integrating factor, multiply the given differential equation with integrating factor µ(x,y).i.e. µ(x,y)[2xy − 9x² + (2y + x² + 1) dy/dx] = 0Rearrange the above equation by considering the product rule of differentiation. i.e. [µ(x,y)(2xy - 9x²)dx] + [µ(x,y)(x² + 2y + 1)dy] = 0For the above equation to be exact, ∂/∂y(µ(x,y)(2xy - 9x²)) = ∂/∂x(µ(x,y)(x² + 2y + 1)).Now, ∂/∂y(µ(x,y)(2xy - 9x²)) = 2xµ(x,y) + ∂µ(x,y)/∂y(2xy - 9x²) -----(1)∂/∂x(µ(x,y)(x² + 2y + 1)) = µ(x,y)2x + ∂µ(x,y)/∂x(x² + 2y + 1) -----(2)On comparing the equations (1) and (2), we get ∂µ(x,y)/∂x = 0So µ(x,y) = f(y)where f(y) is an arbitrary function of y.Substituting µ(x,y) = f(y) in equation (1) and equating it to 0, we get df/dy = (2xy - 9x²)/f(y)Integrating the above equation w.r.t y, we get f(y) = e^(3y²+cy)where c is the constant of integration.Now the integrating factor is µ(x,y) = e^(3y²+cy)Using the integrating factor µ(x,y), we can make the given initial value problem exact. Multiply the integrating factor on both sides of the given initial value problem, we getµ(x,y) [2xy − 9x²] dx + µ(x,y) [2y + x² + 1] dy = 0Substituting the value of integrating factor in the above equation and simplifying, we get(2xye^(3y²+cy) − 9x²e^(3y²+cy) + e^(3y²+cy)(x² + 2y + 1))dy + e^(3y²+cy)(2xy - 18x)dx = 0Let M(x,y) = e^(3y²+cy)(x² + 2y + 1)and N(x,y) = e^(3y²+cy)(2xy - 18x)Then ∂M/∂y = 6ye^(3y²+cy)(x² + 2y + 1) + e^(3y²+cy)(2x)And ∂N/∂x = e^(3y²+cy)(2y - 18)Substituting the values of M(x,y) and N(x,y) in the equation M(x,y)dx + N(x,y)dy = 0, we get(6ye^(3y²+cy)(x² + 2y + 1) + e^(3y²+cy)(2x)) dx + e^(3y²+cy)(2y - 18) dy = 0

Know more about initial value problem here:

https://brainly.com/question/30466257

#SPJ11

As the domain of the above function is (-5,∞), it is also the interval of definition. So correct option is (-5,∞).

The differential equation is [tex](y - x)y' = y - x + 18[/tex].

Here, y = x + 6√x + 5

Given, y = x + 6√x + 5 => dy/dx = 1 + (3/√x + 5)/2

Using the above value of dy/dx, we get y' = (1 + (3/√x + 5)/2).

Now, substituting these values in the differential equation, we get:

LHS = [tex](y - x)y' = (x + 6√x + 5 - x)(1 + (3/√x + 5)/2)= (3/2)√x + 5.[/tex]

RHS = [tex]y - x + 18 = x + 6√x + 5 - x + 18= 6√x + 23.= (3/2)√x + 5 + 18.[/tex]

Now, LHS = RHS

Hence, (y - x)y' = y - x + 18 is an explicit solution of the given first-order differential equation.

The function y = x + 6√x + 5 can be considered as a function, and its domain is (-5,∞).For an explicit solution of the given differential equation, y = x + 6√x + 5 can be considered.

As the domain of the above function is (-5,∞), it is also the interval of definition.

Hence, the answer is [−5,∞].

To know more about differential equation visit:

https://brainly.com/question/32645495

#SPJ11

We can conclude that angle BPA is obtuse because the sum of angles QAP, QPA, PBC, and PCQ must be greater than 180 degrees. Hence, ZAPB is obtuse.

Given the triangle, AABC, a point P in the interior of the triangle is such that ZBPC is not obtuse.

Our task is to prove that there exists a point Q such that B - Q-C and A - P - Q hold. We also have to prove that ZAPB is obtuse.

The diagram can be drawn as follows:

[asy]
import olympiad;
size(120);
pair A, B, C, P, Q;
A = (-10,0);
B = (0, 0);
C = (6, 0);
P = (-3, 1);
Q = (-6, 0);
draw(A--B--C--cycle);
draw(P--Q);
label("$A$", A, W);
label("$B$", B, S);
label("$C$", C, E);
label("$P$", P, N);
label("$Q$", Q, S);
draw(right angle mark(B, P, C, 7));
[/asy]

(a) Proof: The given problem indicates that ZBPC is not obtuse, which means that the angle BPC is acute. A point Q must exist on BC such that angle BPA and angle QPC are equal.

We will use the perpendicular bisector of the line segment AP to find the point Q.

The line segment AQ is the perpendicular bisector of the line segment BC. This implies that BQ = QC and that AQ = QP.

Therefore, we have B - Q-C and A - P - Q. This proves that there exists a point Q such that B - Q-C and A - P - Q hold.

(b) Proof: Given that A, P, and Q are collinear, we can see that AQ = QP and that the triangle AQP is isosceles.

Therefore, angle QAP is equal to angle QPA. Since BQ = QC and BP = PC, we know that triangle BPC is isosceles.

Therefore, angle PBC = angle PCQ.

Thus, we can conclude that angle BPA is obtuse because the sum of angles QAP, QPA, PBC, and PCQ must be greater than 180 degrees. Hence, ZAPB is obtuse.

Know more about angle here:

https://brainly.com/question/25716982

#SPJ11

The value of the line integral F · dr over the given curve C is 9π.[tex]9\pi[/tex]

To find a potential function for the given force field [tex]F(x, y) = (x + y*)i + (x - y^2 + 2y)j[/tex], we need to determine if the field is conservative. If a potential function exists, it will satisfy the condition ∇f = F, where ∇ is the gradient operator.

Taking the partial derivatives of a potential function f(x, y), we have:

∂f/∂x = x + y*

∂f/∂y = [tex]x - y^2 + 2y[/tex]

From the first partial derivative, we can see that ∂f/∂x should be equal to x + y*. Therefore, we can determine f(x, y) as follows:

[tex]f(x, y) = (1/2)x^2 + xy* + g(y)[/tex]

To find g(y), we substitute this expression into the second partial derivative:

∂f/∂y =[tex]x - y^2 + 2y = x - (y^2 - 2y)[/tex]

Comparing this with the expression for ∂f/∂y, we can deduce that [tex]g(y) = -(1/3)y^3 + y^2.[/tex]

Therefore, the potential function for the given force field is:

[tex]f(x, y) = (1/2)x^2 + xy* - (1/3)y^3 + y^2[/tex]

To evaluate the line integral F · dr, where C is given by r(t) = (cos t, 3 sin t), we substitute the parametric equations of the curve into the force field:

F(r(t)) = ((cos t) + (3 sin t)*, (cos t) - (9 [tex]sin^2 t[/tex]) + (6 sin t))

dr = (-sin t, 3 cos t) dt

Now we evaluate the line integral:

∫ F · dr = ∫ (F(r(t)) · dr/dt) dt

            = ∫ [tex]((cos t) + (3 sin t)*)(-sin t) + ((cos t) - (9 sin^2 t) + (6 sin t))(3 cos t) dt[/tex]          [tex]=\int (-sin t cos t - 3 sin^2 t cos t + 3 cos t + 9 sin^2 t cos t - 18 sin^3 t + 18 sin t cos t) dt[/tex]

            = ∫ [tex](18 sin t cos t - 3 sin^2 t cos t - 18 sin^3 t + 18 sin t cos t) dt[/tex]

            = ∫ [tex](36 sin t cos t - 3 sin^2 t cos t - 18 sin^3 t) dt[/tex]

            = ∫ (3 sin t cos t (12 - sin t)) dt

            = (3/2) ∫ (12 - sin t) d(sin t)

            = (3/2) (12t + cos t) + C

Evaluating this integral over the interval [0, π/2], we get:

∫ F · dr = (3/2) (12(π/2) + cos(π/2)) - (3/2) (12(0) + cos(0))

            = (3/2) (6π + 1 - 0 - 1)

            = 9π

Therefore, The line integral ∫ F · dr is [tex]9\pi[/tex]

Learn more about potential functions and Line integrals

brainly.com/question/32556649

#SPJ11

(a) Stability of Velocity of Money:

It is the extent to which the quantity theory of money holds in the short term. Velocity of money refers to the rate at which money changes hands or in other words it is defined as the number of times a unit of money is used in purchasing final goods and services in a given period of time.

(b) Importance of Stability of Velocity of Money in explaining Fisher's theory of demand for money:

According to Fisher, there is a direct relation between the volume of trade and the demand for money.

(c) Differences between Fisher's and Friedman's theory of the demand for money:Fisher's Theory of Demand for Money:It is based on the Quantity Theory of Money ,while Friedman's theory of the demand for money is based on the modern Quantity Theory of Money

a) In case, the velocity of money is unstable, then an increase in money supply may lead to a decrease in velocity of money leading to an insignificant effect on prices.

Whereas, in case, velocity is stable, then an increase in money supply will lead to an equivalent rise in prices. The stability of the velocity of money is critical for the Quantity Theory of Money.

b) According to him, the volume of trade is influenced by the quantity of money, and the velocity of money remains constant.

In other words, Fisher assumed the stability of velocity of money and believed that changes in the quantity of money lead to an equal proportionate change in the general price level. So, in order to validate Fisher's Quantity Theory of Money, velocity of money should be stable.

c) Fisher assumes that velocity of money is constant in the short-run, therefore, the only variable affecting the price level is the quantity of money.

Friedman's Theory of Demand for Money:

Friedman's theory of the demand for money is based on the modern Quantity Theory of Money. He has divided the demand for money into two components: Transactions demand for money and Asset demand for money. He also assumes that velocity of money is not constant rather it is stable in the long run. Friedman also included other factors which influence the

Learn more about demand at;

https://brainly.com/question/32703554

#SPJ11

The 80% confidence interval for the true mean difference between the average travel time for route l and the average travel time for route ll is (-2.44, 2.04).

Step 1: Finding the mean of the paired differences The difference between route l and route ll is given by:d = (route l travel time) - (route ll travel time)

Now, we construct a table of the difference of travel times between route l and route ll, d. Then find the mean of the difference.

[tex]Route lRoute llDifference (d)3225 24 31 29 28 3029 30 34 3024 25 34 26 26 2727 0 -7 3 2 -3 3 -6 2 -2 -0.2[/tex]Here,∑d = -2.

So,  d¯ = -2/10

= -0.

2Step 2: Finding the critical value that should be used in constructing the confidence interval. For an 80% confidence interval, the value of t is given as:

t0.8, 10-1 = 1.372

This can be found using the t-table or calculator.

Step 3: Finding the standard deviation of the paired differences

Now, we need to find the standard deviation of the paired differences to be used in constructing the confidence interval. This can be calculated as follows:s = 3.60

Step 4: Constructing the 80% confidence interval

The 80% confidence interval is given as follows.

Lower endpoint Upper endpoint= -0.2 - (1.372) (3.60 / √10)

= -2.44= -0.2 + (1.372) (3.60 / √10)

= 2.04

Therefore, the 80% confidence interval for the true mean difference between the average travel time for route l and the average travel time for route ll is (-2.44, 2.04).

To learn more about travel visit;

https://brainly.com/question/18090388

#SPJ11

To sketch the graph of the function f(x) = √(x + 7) if x < 4 and f(x) = a if x ≥ 4, we'll break it down into two parts:

For x < 4: f(x) = √(x + 7)

This part of the graph represents a square root function with a horizontal shift of 7 units to the left. It starts at the point (-7, 0) and increases as x moves towards 4. However, since the limit is requested for x = 11.49, which is greater than 4, we won't consider this part of the graph for calculating the limits.

For x ≥ 4: f(x) = a

This part of the graph is a horizontal line at y = a. Since a is not specified in the question, we'll leave it as a general variable.

Now, let's calculate the requested limits:

lim f(x) as x approaches 11.49:

Since x = 11.49 is greater than 4, the limit will be the value of f(x) for x ≥ 4, which is a. So the limit is a.

lim f(x) as x approaches 24+4:

The limit as x approaches 24+4 doesn't make sense because 24+4 is not a well-defined number. It seems like there might be a typographical error. If you meant to write 24+4 as 24+4ε, where ε approaches 0, then the limit would still be a because f(x) is constant for x ≥ 4.

lim f(x) as x approaches 2.44:

Since x = 2.44 is less than 4, it falls under the first part of the function f(x) = √(x + 7). So we can calculate the limit as x approaches 2.44 by substituting x = 2.44 into the function:

f(2.44) = √(2.44 + 7) = √9.44 ≈ 3.071.

Therefore, the limit as x approaches 2.44 is approximately 3.071.

To learn more about graph visit: brainly.com/question/30285744

#SPJ11

Find all scalars k such that u = [k, -k, k] is a unit vector.

Since the norm of a vector u = [k, -k, k] is sqrt(k^2 + (-k)^2 + k^2), the condition for u to be a unit vector can be represented by this equation:   sqrt(k^2 + k^2 + k^2) = sqrt(3k^2) = 1  

which implies  k = ±1/sqrt(3).

Therefore, the possible values of k are -1/sqrt(3) and 1/sqrt(3).

Let u, v be two vectors such that

||u+v|| = 2, and ||u – v|| = 4.

Find the dot product u . v To solve for the dot product u.v, use the identity

(||u+v||)^2 + (||u-v||)^2 = 2(u.v)2 + 2||u||^2||v||^2Since ||u+v|| = 2 and ||u-v|| = 4,

substitute them in the above identity to get:  2^2 + 4^2 = 2(u.v) + 2||u||^2||v||^2which simplifies to:  20 = 2(u.v) + 2(||u|| ||v||)^2 = 2(u.v) + 2||u||^2||v||^2

Substitute ||u|| = ||v||

= sqrt(u.u)

= sqrt(v.v)

= sqrt(k^2 + (-k)^2 + k^2)

= sqrt(3k^2) to obtain:  20

= 2(u.v) + 2(3k^2)^2= 2(u.v) + 18k^2

Solve the above equation for u.v:  2(u.v) = 20 - 18k^2u.v = (20 - 18k^2)/2 = 10 - 9k^2

Answer: The values of k are -1/sqrt(3) and 1/sqrt(3).

The dot product u.v is 10 - 9k^2, where k is a scalar.

To know more about vector visit:-

https://brainly.com/question/31180849

#SPJ11

The solution set in interval notation for the equation |2x - 5 - 824| is (-∞, 417) U (417, +∞).

The equation |2x - 5 - 824| represents the absolute value of the expression 2x - 829. To find the solution set, we need to consider two cases: when the expression inside the absolute value is positive and when it is negative.

Case 1: (2x - 829) ≥ 0

When 2x - 829 ≥ 0, we solve for x:

2x ≥ 829

x ≥ 829/2

x ≥ 414.5

Therefore, in this case, the solution set is x ≥ 414.5, which can be represented as (414.5, +∞) in interval notation.

Case 2: (2x - 829) < 0

When 2x - 829 < 0, we solve for x:

2x < 829

x < 829/2

x < 414.5

Therefore, in this case, the solution set is x < 414.5, which can be represented as (-∞, 414.5) in interval notation.

Combining both cases, the solution set for the equation |2x - 5 - 824| is (-∞, 414.5) U (414.5, +∞).

Learn more about interval notation

brainly.com/question/29184001

#SPJ11

The value of the double integral ∬D 8xy dA, over the triangular region D with vertices (0,0), (1,2), and (0,3), is 2.

To calculate this integral, we need to set up the limits of integration for both x and y. Since D is a triangular region, we can express y as a function of x within the given bounds.

The line passing through the points (0,0) and (1,2) can be represented as y = 2x, while the line passing through (0,0) and (0,3) can be expressed as x = 0. Therefore, the limits of integration for y are from 0 to 2x, and for x, they are from 0 to 1.

The integral becomes:

∬D 8xy dA = ∫₀¹ ∫₀²x 8xy dy dx

Integrating with respect to y first, we get:

∫₀²x 8xy dy = 4x²y² | from y = 0 to y = 2x

              = 4x²(2x)² - 4x²(0)²

              = 16x⁵

Now, we integrate with respect to x:

∫₀¹ 16x⁵ dx = (16/6)x⁶ | from x = 0 to x = 1

            = (16/6)(1)⁶ - (16/6)(0)⁶

            = 16/6

            = 8/3

Therefore, the value of the double integral is 8/3, which is approximately 2.6667.

To know more about double integrals, refer here:

https://brainly.com/question/27360126#

#SPJ11

The point A(0,-2) is on the line y-3x=-2. So, the answer is A(0,-2).

Given the line equation

y-3x=-2,

we are to find the point among A(0,-2), B(-3,1) and C(1,1) which lies on this line.

To check if a point lies on a line, we substitute the values of x and y into the equation of the line. If the equation holds true, then the point lies on the line. If it doesn't, the point does not lie on the line.

Let us check for point A(0,-2)

Whether A(0,-2) lies on

y - 3x = -2

is determined by whether or not the following equation holds true:

-2 - 3(0) = -2LHS = -2RHS = -2

Therefore, point A(0,-2) is on the line

y-3x=-2.

So, the answer is A(0,-2).

To know more about line y-3x=-2 visit:

https://brainly.com/question/30177779

#SPJ11

The derivative of x²(x-1)/x using the Product Rule is 2x - 1, and using the Quotient Rule is also 2x - 1.

The first approach involves simplifying the expression to x(x-1) and using the Product Rule to differentiate each term separately. Applying the rule, we obtained the derivative 2x - 1. The second approach used the Quotient Rule directly.

We identified f(x) = x²(x-1) and g(x) = x, differentiated them to find f'(x) and g'(x), and applied the Quotient Rule formula. Simplifying the expression, we obtained the same derivative, 2x - 1.

Both methods yield the same result, confirming the correctness of the derivative calculation. Thus, the derivative of x²(x-1)/x is 2x - 1.


Learn more about Derivative click here :brainly.com/question/28376218

#SPJ11

35) The solution to the given differential equation is

[tex]y(t) = (1 / (2sin(√3/2))))[e^(t(cos √3 + sin √3) / 2) - e^(t(cos √3 - sin √3) / 2)] - 1.[/tex]

36) The solution to the given differential equation is

                   [tex]y(x) = c1 (1 - x) e^(-x).[/tex]

37) The solution to the given differential equation is:

         [tex]y(x) = (5/2) e^x - (3/2) e^(-x) - x - sin(x) + cos(x).[/tex]

Explanation:

35. The differential equation is:

                      [tex]y" - 2y' + 2y = 0.[/tex]

The general solution to the given differential equation is:

 [tex]y(t) = C1e^(t(cos √3 + sin √3) / 2) + C2e^(t(cos √3 - sin √3) / 2)[/tex]

Therefore,

[tex]y(π/2) = 0[/tex]

gives

[tex]C1e^(π/2(cos √3 + sin √3) / 2) + C2e^(π/2(cos √3 - sin √3) / 2) = 0[/tex]... equation (1)

[tex]y(π) = -1[/tex]

gives

[tex]C1e^(π(cos √3 + sin √3) / 2) + C2e^(π(cos √3 - sin √3) / 2) = -1.[/tex].. equation (2)

Solving equations (1) and (2) we get: C1 = -C2

Therefore, the solution is:

[tex]y(t) = C1e^(t(cos √3 + sin √3) / 2) - C1e^(t(cos √3 - sin √3) / 2)[/tex]

Use the condition [tex]y(π/2) = 0[/tex]  to get:

[tex]C1 = (1 / (2sin(√3/2))))[/tex]

Use the values of C1 and C2 to obtain:

[tex]y(t) = (1 / (2sin(√3/2))))[e^(t(cos √3 + sin √3) / 2) - e^(t(cos √3 - sin √3) / 2)] -1[/tex]

Therefore, the solution to the given differential equation is

[tex]y(t) = (1 / (2sin(√3/2))))[e^(t(cos √3 + sin √3) / 2) - e^(t(cos √3 - sin √3) / 2)] - 1.[/tex]

36. The differential equation is:

                          [tex]y" + 2y' + y = 0.[/tex]

The characteristic equation is:

       [tex]r^2 + 2r + 1 = 0[/tex]

             [tex](r+1)^2 = 0[/tex]

           [tex]r = -1[/tex]

We can use the formula:

      [tex]y(x) = c1 e^(-x) + c2 x e^(-x)[/tex]

Since [tex]y(-1) = 0[/tex], we have

[tex]0 = c1 e^(1) - c2 e^(1)[/tex]

Therefore, c1 = c2

We can also use the other condition[tex]y'(0) = 0:[/tex]

[tex]y'(x) = - c1 e^(-x) + c2 e^(-x) - c2 x e^(-x)[/tex]

[tex]y'(0) = 0[/tex]

gives us:

0 = -c1 + c2

Therefore, c1 = c2

Therefore, the solution to the given differential equation is

                   [tex]y(x) = c1 (1 - x) e^(-x).[/tex]

37.The differential equation is:

                  [tex]y'' - y = x + sin x[/tex]

The characteristic equation is:

        [tex]r^2 - 1 = 0[/tex]

        [tex]r = 1[/tex] and

             [tex]r = -1[/tex]

Let yh be the solution to the homogeneous equation [tex]y'' - y = 0[/tex].

We obtain:

                  [tex]yh(x) = c1 e^x + c2 e^(-x)[/tex]

Let yp be a particular solution to the non-homogeneous equation.

We take

          [tex]yp = Ax + B sin(x) + C cos(x).[/tex]

          [tex]y'p = A + B cos(x) - C sin(x)[/tex]

          [tex]y''p = -B sin(x) - C cos(x)[/tex]

       [tex]y''p - y = -2B sin(x) - 2C cos(x) + Ax + B sin(x) + C cos(x)[/tex]

                      = [tex]x + sin(x)[/tex]

Equating the coefficients of sin(x) gives us:

          [tex]B/2 + A = 0[/tex](1)

Equating the coefficients of cos(x) gives us:-

         [tex]C/2 + C = 0[/tex](2)

Equating the coefficients of x gives us:

        [tex]A = 0 (3)[/tex]

Equating the coefficients of the constants gives us:-

          [tex]2B - 2C = 0 (4)[/tex]

Solving the system of equations (1)-(4) gives us:

     [tex]B = -1[/tex] and

       [tex]C = 1[/tex]

Therefore, the particular solution is[tex]yp = -x - sin(x) + cos(x)[/tex]

Therefore, the general solution to the given differential equation is:

    [tex]y(x) = c1 e^x + c2 e^(-x) - x - sin(x) + cos(x)[/tex]

We use the initial conditions [tex]y(0) = 2[/tex]

and

[tex]y'(0) = 3[/tex]

to obtain the solution:

[tex]2 = c1 + c2 + 1c1 + c2 = 1[/tex]... equation (1)

[tex]3 = c1 - c2 - 1c1 - c2 = 4..[/tex]. equation (2)

Adding equation (1) and (2) gives us:

[tex]2c1 = 5[/tex]

Therefore, [tex]c1 = 5/2[/tex]

Using equation (1) gives us:

[tex]c2 = -3/2[/tex]

To know more about non-homogeneous, visit

https://brainly.com/question/18271118

#SPJ11

The function f(x, y) = x³ + y³ + 21x² - 18y² has neither local max nor local min.

Saddle point is (0, 0).

Given the function is,

f(x, y) = x³ + y³ + 21x² - 18y²

Partially differentiating the functions with respect to 'x' and 'y' we get,

fₓ = 3x² + 42x

fᵧ = 3y² - 26y

fₓₓ = 6x + 42

fᵧᵧ = 6y - 26

fₓᵧ = 0

Now,

fₓ = 0 gives

3x² + 42x = 0

x(x + 13) = 0

x= 0, -13

and fᵧ = 0 gives

3y² - 26y = 0

y (3y - 26) = 0

y = 0, 26/3

So, for (0, 0) both fₓ and fᵧ are zero.

So the discriminant is,

D = fₓₓ(0, 0) fᵧᵧ(0, 0) - [fₓᵧ(0, 0)]² = 42 * (-26) - 0 = - 1092.

So, D < 0 so the function neither has max nor min.

So the saddle point is (0, 0).

To know more about Saddle Point here

https://brainly.com/question/31669578

#SPJ4

The degree measure is [tex]$$\text{Degree measure} = 2695.12 ^\circ$$[/tex]

Given a radian measure 47.

To convert radian to degree, we use the conversion formula;

        Degree measure = [tex]$\frac{180}{\pi}$[/tex] radians

Therefore, we substitute the given radian measure in the above conversion formula

             [tex]Degree measure = $\frac{180}{\pi}$ $\times$ 47$\frac{180}{\pi}$ $\approx$ 57.296[/tex]

Thus, we get the degree measure as;

Degree measure = [tex]57.296 $\times$ 47\\= 2695.12 degrees[/tex]

To convert radians to degrees, we multiply radians by [tex]$\frac{180}{\pi}$.$$\text{Degree measure} = \frac{180}{\pi} \text{ radians}$$[/tex]

Here, we have radian measure of 47 radians.

So, the degree measure is given as follows;

                   [tex]$$\text{Degree measure} = \frac{180}{\pi} \times 47 = 57.296 \times 47$$[/tex]

Therefore, the degree measure is [tex]$$\text{Degree measure} = 2695.12 ^\circ$$[/tex]

Learn more about radian measure

brainly.com/question/23891715

#SPJ11

To prove that for a continuous function f, it is worth [ƒ [ dv f dV = f(xo) dV A A for some xo E A, we can use the mean value theorem for integrals.

Let A be a bounded set in R^n, and let f be a continuous function on A. Then, there exists a point xo in A such that

∫A f(x) dV = f(xo) * V(A)

where V(A) is the volume (or area) of A.

To see why this is true, consider the function g(t) = ∫A f(x) dt, where A is fixed and x is a variable in A. By the fundamental theorem of calculus, g'(t) = f(x(t)) * dx/dt, where x(t) is a path in A. Since f is continuous, it is integrable, and so g is differentiable by the Leibniz rule for differentiation under the integral sign. Thus, by the mean value theorem for integrals, there exists a value t0 in [0,1] such that

∫A f(x) dV = g(1) - g(0) = g'(t0) = f(x0) * V(A)

where x0 = x(t0) is a point in A.

Therefore, for any continuous function f on a bounded set A, we can always find a point xo in A such that [ƒ [ dv f dV = f(xo) dV A A.

To know more about continuous function visit:

https://brainly.com/question/28228313

#SPJ11

eigenvalues of this transformation are:

- λ = 0

- λ = 1

To find the eigenvalues of the given transformation T, we need to solve the equation T(v) = λv, where v is a non-zero vector and λ is the eigenvalue.

Let's consider the transformation T(a, b, c) = (0, a, b) and assume that (a, b, c) is an eigenvector with eigenvalue λ.

Substituting these values into the equation T(v) = λv, we get:

(0, a, b) = λ(a, b, c)

This leads to the following equations:

0 = λa

a = λb

b = λc

From the first equation, we can see that either λ = 0 or a = 0. However, since we are looking for non-zero eigenvectors, λ cannot be 0.

Now, from the second equation, if a = λb and a ≠ 0, then λ = 1.

Finally, from the third equation, if b = λc and b ≠ 0, then λ = 1.

Therefore, the eigenvalues of the given transformation T are λ = 0 and λ = 1.

To know more about eigenvalues visit:

brainly.com/question/29861415

#SPJ11

The value of the fraction in the given expression is [tex]1/6[/tex].

We are given the expression as [tex](2x - 1/2)^2 = x^2[/tex].

The given equation can be written as [tex](2x - 1/2) x (2x - 1/2) = x^2[/tex].

Expanding the left-hand side we get [tex]4x^2 - 2x + 1/4 = x^2[/tex].

On solving the above equation we get [tex]3x^2 - 2x + 1/4 = 0[/tex].

Using the quadratic formula, we get the roots as [tex]x =[/tex] [tex][2± \sqrt{2}]/6[/tex].

So, the value of the fraction in the given expression is [tex]1/6[/tex].

Thus, the solution to the above equation is

[tex](2x - 1/2)^2 = x^2[/tex]

[tex](2x - 1/2) x (2x - 1/2) = x^2[/tex] and the value of the fraction in the given expression is  [tex]1/6[/tex].

Learn more about quadratic formula here:

https://brainly.com/question/22103544

#SPJ11

To find the inverse function g'¹(x) of g(x) = 2x - 3, we need to follow these steps:

Step 1: Replace g(x) with y.

  y = 2x - 3

Step 2: Swap the x and y variables.

  x = 2y - 3

Step 3: Solve the equation for y.

  Add 3 to both sides of the equation:

  x + 3 = 2y

  Divide both sides of the equation by 2:

  (x + 3)/2 = y

Step 4: Replace y with g'¹(x).

  g'¹(x) = (x + 3)/2

Therefore, the inverse function of g(x) = 2x - 3 is g'¹(x) = (x + 3)/2.

Now let's examine the answer choices:

A) g'¹(x) = (x + 2)/3

B) g'¹(x) = (x - 1)/3

C) g'¹(x) = (x + 1)/3

D) g'¹(x) = (x + 3)/2

By comparing the derived inverse function g'¹(x) = (x + 3)/2 with the answer choices, we can see that the correct answer is D) g'¹(x) = (x + 3)/2.

learn more about equation here: brainly.com/question/29657983

#SPJ11

The first three open sets are proper subsets of X and the last two open sets are X itself and the empty set.

The given set X is [tex]X = {1, 2, 3, 4, 5}.[/tex]

The following steps can be used to construct a topology on X.

Step 1: The empty set Ø and X are both subsets of X and thus are members of the topology. [tex]∅, X ∈ τ[/tex]

Step 2: If U and V are any two open sets in the topology, then their intersection U ∩ V is also an open set in the topology. [tex]U, V ∈ τ ⇒ U ∩ V ∈ τ[/tex]

Step 3: If A is any collection of open sets in the topology, then the union of these sets is also an open set in the topology.

[tex]A ⊆ τ ⇒ ∪A ∈ τ[/tex]

Applying these steps, the topology on X is as follows:[tex]τ = {∅, X, {1, 2}, {3, 4, 5}, {1, 2, 3, 4, 5}}\\[/tex]

Note that the topology consists of five open sets.

The first three open sets are proper subsets of X and the last two open sets are X itself and the empty set.

Know more about empty set here:

https://brainly.com/question/30325026

#SPJ11

The function is symmetric with respect to the origin, and the answer is option c, origin symmetry.

The algebraic tests are used to determine whether the curve is symmetric to the y-axis, the x-axis, and the origin.

Let's check for symmetry with respect to each axis and the origin. [tex]x² - y = 6[/tex]

Since x² and -y are both even, this equation is symmetric with respect to the y-axis.

Thus, y-axis symmetry is applicable to this function. [tex]x² - y = 6[/tex]

Since the equation is of form [tex]f(x) = g(-x)[/tex], it is an odd function, which means it is symmetric with respect to the origin.

Therefore, the function is symmetric with respect to the origin, and the answer is option c, origin symmetry.

Know more about function  here:

https://brainly.com/question/11624077

#SPJ11

Given that f(x, y, z) = x i − z j + y k s is the part of the sphere x² + y² + z² = 4 in the first octant, with orientation toward the origin. The integral of the curl of the vector function in the first octant is equal to 8π.

Here's the step-by-step solution:First, let's try to find the intersection of the sphere with the first octant. For that, we put all the coordinates positive. We know that x² + y² + z² = 4 represents a sphere of radius 2 centered at the origin. It is in the first octant if all its coordinates are positive, that is, it is x > 0, y > 0, and z > 0.Now, we have the limits of integration, which are:x ∈ [0, 2]y ∈ [0, sqrt(4 - x²)]z ∈ [0, sqrt(4 - x² - y²)]Now, let's calculate the integral using Stokes' theorem. The expression for the integral is given as:∫∫S curl(f) · dS, where S is the surface, curl(f) is the curl of the vector function f, and dS is the surface element. We can write curl(f) as:curl(f) = [(∂(y s))/∂y - (∂(-z s))/∂z]i + [(∂(-x s))/∂x - (∂(-z s))/∂z]j + [(∂(-x s))/∂y - (∂(y s))/∂x]k= s i + s j + s kNow, we can calculate the integral as follows:∫∫S curl(f) · dS= ∫∫S (s i + s j + s k) · dS= ∫∫S s dSWe know that the sphere has a radius of 2. Therefore, its surface area is given as:4πUsing the limits of integration, we can find that the limits of integration for s are:0 ≤ s ≤ 2So, the solution is ∫∫S curl(f) · dS = ∫∫S s dS = s ∫∫S dS = s × 4π = 8π

Finally, we can conclude that the given vector function is the part of the sphere x² + y² + z² = 4 in the first octant, with orientation toward the origin.

To know more about Stokes' theorem :

brainly.com/question/32258264

#SPJ11

a) The given differential equation is, $$x^{2}\frac{dy}{dx}-(x^{2}+xy+y^{2})=0$$, We can write the equation as, $$\frac{dy}{dx}=\frac{x^{2}+xy+y^{2}}{x^{2}}$$. Let's consider a substitution, $y=vx$. Then $\frac{dy}{dx}=v+x\frac{dv}{dx}$Differentiating w.r.t. $x$ and simplifying, we get,$$\frac{dy}{dx}=\frac{v}{1-v}$$On substitution we get, $$\frac{v}{1-v}=\frac{x^{2}+xv^{2}}{x^{2}}$$Then we can solve for $v$ as, $$v=\frac{1}{\frac{x}{y}+1}$$Substitute $v$ in the expression for $y$, $$y=\frac{cx}{\frac{x}{y}+1}$$. Thus the general solution of the given differential equation is, $$y=\frac{cx}{1-\frac{x}{y}}$$Where $c$ is a constant.

b) The given differential equation is, $$y''+2y'+y=t^{-2}e^{-t}$$Let's solve the homogenous equation associated with the given differential equation. The homogenous equation is,$$y''+2y'+y=0$$Let's consider a trial solution of the form $y=e^{rt}$. Then the auxiliary equation is,$$r^{2}+2r+1=0$$On solving the above equation, we get,$$(r+1)^{2}=0$$Then, $$r=-1$$. Hence the general solution of the homogenous equation is, $$y_{h}=c_{1}e^{-t}+c_{2}te^{-t}$$where $c_1$ and $c_2$ are constants.

Let's now find a particular solution for the given non-homogeneous equation. We can guess a particular solution of the form,$$y_{p}=At^{-2}e^{-t}$$On substituting this into the differential equation and solving for $A$, we get,$$A=\frac{1}{2}$$Hence a particular solution for the given differential equation is,$$y_{p}=\frac{1}{2t^{2}}e^{-t}$$Then the general solution of the given differential equation is,$$y=y_{h}+y_{p}=c_{1}e^{-t}+c_{2}te^{-t}+\frac{1}{2t^{2}}e^{-t}$$

Learn more about differential equation:

https://brainly.com/question/1164377

#SPJ11

Therefore, the confidence limits at a 95% CI for these related samples are approximately -2.03 and 6.11.

To find the confidence limits at a 95% confidence interval (CI) for the differences in test scores, we can calculate the mean and standard deviation of the sample.

Given the differences in test scores: -1.7, +3.3, +4.3, +6.2, and +1.1.

Step 1: Calculate the mean of the differences

Mean =[tex](-1.7 + 3.3 + 4.3 + 6.2 + 1.1) / 5[/tex]

= 2.04

Step 2: Calculate the standard deviation of the differences

Standard deviation:

= √([(-1.7 - 2.04)² + (3.3 - 2.04)² + (4.3 - 2.04)² + (6.2 - 2.04)² + (1.1 - 2.04)²] / 4)

= √(43.52 / 4)

= √(10.88)

= 3.30 (approximately)

Step 3: Calculate the standard error of the mean (SEM)

SEM = standard deviation / √(n)

= 3.30 / √(5)

= 1.47 (approximately)

Step 4: Calculate the margin of error (ME) at a 95% CI

ME = critical value * SEM

Since the sample size is small (n = 5), we need to use the t-distribution. At a 95% confidence level with 4 degrees of freedom (n - 1 = 5 - 1 = 4), the critical value is approximately 2.776.

ME = 2.776 * 1.47

= 4.07 (approximately)

Step 5: Calculate the confidence limits

Lower limit = mean - ME

= 2.04 - 4.07

= -2.03 (approximately)

Upper limit = mean + ME

= 2.04 + 4.07

= 6.11 (approximately)

(b) No, because 0 is contained within the 95% CI. The confidence interval includes the value of 0, which suggests that there is a possibility that there is no significant difference in retention between the Friday and Monday classes. Therefore, based on the given information, we cannot conclude that students retained more of the material taught in the Friday class.

To know more about confidence limits,

https://brainly.com/question/32098370

#SPJ11

Given, The weighted Euclidean inner product

(u,v)=5u1v1+2u2v2and, u = (-1, 2), v = (2, -3), w = (1, 3)

 Now, we have to calculate the following:

(i). (u,w)(ii). (u+w,v)(iii). ||ul| (i). (u,w):

The dot product of u and w is as follows:

(u,w) = u1 * w1 + u2 * w2(u,w) = (-1)(1) + (2)(3)  (u,w) = -1 + 6 (u,w) = 5(ii). (u+w,v):

The dot product of (u + w) and v is as follows:

(u+w,v) = (u, v) + (w, v)(u+w,v) = (5*(-1)(2)) + (2*(2)(-3)) (u+w,v) = -10 - 12(u+w,v) = -22(iii). ||ul| :

To calculate ||ul|, we use the formula as follows:

[tex]||ul| = √(u1)^2 + (u2)^2||ul| = √((-1)^2 + (2)^2)  ||ul| = √5  Answer: (i). (u,w) = 5 (ii). (u+w,v) = -22 (iii). ||ul| = √5[/tex]

To know more about weighted Euclidean inner product visit:

https://brainly.com/question/31381869

#SPJ11

A probability density function is a non-negative function that represents the probability of a continuous random variable's values falling within a certain range.

A valid probability density function satisfies certain conditions.

The sum of the probabilities is equal to one and is non-negative for all values in the range of the random variable.

The following tables show a valid probability density function:

hxP(X = x)0 0.371 0.062 0.013 0.56ling

P(X = x)00038TP

(X = x)038138214CG251310G23103I

(P(X = x))018118318coles3814х

P(X = x)00.0310.01120.6130.315N31

There are six tables given in the question.

Following tables show a valid probability density function:

Table hxP(X = x)

Table ling

P(X = x)

Table T P(X = x)

Table C P(X = x)

Table G P(X = x)

Table х P(X = x)

Therefore, the answer is that the following tables show a valid probability density function:

Table hxP(X = x),

Table lingP(X = x),

Table T P(X = x),

Table C P(X = x),

Table G P(X = x), and Table х P(X = x).

to know more about probability visit:

https://brainly.com/question/31828911

#SPJ11

The z-value for $300 of sales occurring on some Wednesday can be calculated using the given mean and standard deviation. The answer is -1.

The z-value, also known as the z-score, represents the number of standard deviations an observation is from the mean in a normal distribution. It can be calculated using the formula: z = (x - μ) / σ, where x is the observed value, μ is the mean, and σ is the standard deviation.

In this case, the observed value is $300, the mean is $340, and the standard deviation is $40. Plugging these values into the formula, we get: z = (300 - 340) / 40 = -40 / 40 = -1.

Therefore, the z-value for $300 of sales occurring on some Wednesday is -1. This indicates that the sales of $300 is 1 standard deviation below the mean.

Learn more about z-score here:

https://brainly.com/question/31871890

#SPJ11