Explanation:
How many neutrons are there in the nucleus of arsenic?42 neutrons
The nucleus consists of 33 protons (red) and 42 neutrons (blue).
What is the mass of 2.14 mol CaCl2?
Answer:
237.5 grams CaCl2
Explanation:
Use the periodic table to calculate the mass of CaCl2
40.078+(35.45*2)=110.97800
Convert: 2.14 mol CaCl2 * 110.98g CaCl2/1 mol CaCl2 = 237.4972 g
18. What is one of the three things that cause the surface currents of the oceans?
A.differences in salinity
B.temperature differences
C. density differences
D. Coriolis effect
Answer:
b. temperature difference
I need help with this!
Answer:
2.68 cm^3
Explanation:
Density= Mass/Volume
so...
8.96 g/cm^3 = 24.01 g/ V
and then u solve so it would be 2.68 cm ^3
((:
What is the ratio
amount (mol) Fatoms
amount (mol) Xe atoms
Enter your answer as an integer.
Pls help
Answer:
Empirical formula
Explanation:
The empirical formula of a compound is the simplest whole number ratio of atoms of each element in the compound. It is determined using data from experiments and therefore empirical.
Heat will continue to move until the objects or areas have reached the same ______.
Answer: Thermal Equilibrium
Explanation:
Answer:
temperature
Explanation:
I think that's it i'm sorry if i'm wrong
Consider the following chemical equilibrium:
N2 (g) + 3H2 ⇌ 2NH3
Now write an equation below that shows how to calculate Kp from Kc for this reaction at an absolute temperature .
Answer:
Kp = Kc (RT) ^(-2)
Explanation:
For the reaction;
N2 (g) + 3H2 ⇄ 2NH3(g)
We can write;
Kc = [NH3]^2/[N2] [H2]^3
But
Kp = pNH3^2/pN2 . PH2^3
To convert from Kc to Kp
Kp = Kc (RT) ^Δn
where Δn is the change in number of moles going from reactants
to products.
For this reaction;
Δn = 2- (3+1) = -2
Kp = Kc (RT) ^(-2)
Vitamin C is a covalent compound with the molecular
formula C6H8O6. The recommended daily dietary
allowance of vitamin C for children aged 4-8 years is
0.000142mol. What is the mass of this allowance in grams?
The mass allowance of Vitamin C for children aged 4-8 years is equal to 0.025 grams.
What is a mole?A mole can be defined as a standard unit that can be utilized to evaluate the number of entities such as atoms, molecules, ions, or other particular particles in a particular amount of the substance.
The number of elementary entities present in one mole of any chemical substance was found to be equal to 6.023 × 10²³ which is also known as the Avogadro number.
Given, the number of moles of vitamin C = 0.000142 moles
Given, the molecular formula of Vitamin C is C₆H₈O₆.
The mass of one mole of C₆H₈O₆ = 176 g
One mole of Vitamin C has mass = 176 g
0.000142 mol of Vitamin C has mass = 0.000142×176 = 0.025 g
Therefore, the mass of 0.000142 mol of Vitamin C is 0.025 g.
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ2
number of balance electrons of a non ionized oxygen atom
What is the molecular formula of the molecule that has an empirical formula of C2H40 and a molar mass of 176.21 g/mol?
Type your answer using the following format:
CuCl2 for CuCl2.
Answer:
C8H16O4
Explanation:
C2H4O= 24+4+16
44
n=molar mass/empirical formula
n=176.21/44
=4
Therefore
Molar Formula= (C2H4O)4=C8H16O4
A student assembles ball bearings that are 0.19 inches in diameter into an FCC lattice using glue which makes for a 0.001 inch thick bond between bearings. What is the lattice constant in inches of this FCC crystal? Three significant digits and fixed point notation.
Answer:
the lattice constant is 0.270 inches
Explanation:
Given the data in the question;
For FCC lattice;
a = b = c, ∝ = β = α = 90°
from the image below;
AC = 0.19 + 0.19/2 + 0.19/2 + 2(0.001) inch
AC = 0.19 + 0.095 + 0.095 + 0.002
AC = 0.382 inches
Now using Pythagoras theorem
AC² = AB² + BC²
since a = b = c
AC² = a² + a²
(0.382)² = 2a²
2a² = 0.145924
a² = 0.145924 / 2
a² = 0.072962
a = √0.072962
a = 0.27011 ≈ 0.270 inches
Therefore, the lattice constant is 0.270 inches
what is a row of elements across the periodic table called
Answer:
a period
Explanation:
Answer: The row of elements across the periodic table is called "periods".
Explanation:
In the Periodic Table, there are seven rows of elements, which is called periods.
Iron is a metal. The structure of iron is described as a lattice of positive ions in a sea of
electrons. Which of the following statements about iron are correct?
1 iron conducts electricity because the electrons are free to move
2 iron has a high melting point due to the strong covalent bonds
3 iron is an alloy
4 iron is malleable because the layers of atoms can slide over one another
A. 1 only
B. 1 and 3
C. 1 and 4
D. 2, 3 and 4
Answer: 1and 4
Explanation: iron is an element not an alloy. An ionic lattice is not bonded covalently.
How many grams of sulfur must be burned to give 100.0 g of So2
Answer:
50 g of S are needed
Explanation:
To star this, we begin from the reaction:
S(s) + O₂ (g) → SO₂ (g)
If we burn 1 mol of sulfur with 1 mol of oxygen, we can produce 1 mol of sulfur dioxide. In conclussion, ratio is 1:1.
According to stoichiometry, we can determine the moles of sulfur dioxide produced.
100 g. 1mol / 64.06g = 1.56 moles
This 1.56 moles were orginated by the same amount of S, according to stoichiometry.
Let's convert the moles to mass
1.56 mol . 32.06g / mol = 50 g
I need help with this!!!
Answer:
0.73g/cm^3
Explanation:
d=m/v
d=11/15
d=0.73
Given 450.98 g of Cu(NO3)2, how many moles of Ag can be made? Provide your final answer rounded to two decimal places.
Cu + 2 AgNO3 → Cu(NO3)2 + 2 Ag
Answer:
4.82 moles of Ag.
Explanation:
We'll begin by calculating the number of mole in 450.98 g of Cu(NO₃)₂. This can be obtained as follow:
Molar mass of Cu(NO₃)₂ = 63.5 + 2[14 + (16×3)]
= 63.5 + 2[14 + 48]
= 63.5 + 2[62]
= 63.5 + 124
= 187.5 g/mol
Mass of Cu(NO₃)₂ = 450.98 g
Mole of Cu(NO₃)₂ =?
Mole = mass /Molar mass
Mole of Cu(NO₃)₂ = 450.98 / 187.5
Mole of Cu(NO₃)₂ = 2.41 moles
Next, we shall determine the number of mole of Cu needed to produce 450.98 g (i.e 2.41 moles) of Cu(NO₃)₂. This can be obtained as follow:
Cu + 2AgNO₃ —> Cu(NO₃)₂ + 2Ag
From the balanced equation above,
1 mole of Cu reacted to produce 1 mole of Cu(NO₃)₂.
Therefore, 2.41 moles of Cu will also react to produce 2.41 moles of Cu(NO₃)₂.
Thus, 2.41 moles of Cu is needed for the reaction.
Finally, we shall determine the number of mole of Ag produced from the reaction. This can be obtained as follow:
From the balanced equation above,
1 mole of Cu reacted to produce 2 moles of Ag.
Therefore, 2.41 moles of Cu will react to produce = 2× 2.41 = 4.82 moles of Ag.
Thus, 4.82 moles of Ag were obtained from the reaction.
There are four conditions an atom needs to meet to participate in hydrogen bonding. It needs to be_______ enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one________ atom, it needs to be_________enough to create a delta on the connected hydrogen, and it needs to have at least one________.
Answer:
The conditions are
1) Small enough
2) Electronegative atom
3) highly electronegative
4) lone pair of electrons
The correct statement therefore is
It needs to be small enough not to bump into other atoms when approaching the 1s orbital of the hydrogen, it needs to carry at least one electronegative atom, it needs to be highly electronegative enough to create a delta on the connected hydrogen, and it needs to have at least one lone pair of electrons.
Explanation:
Hydrogen bonding is a type of intermolecular bond that occurs between the partial positive charge (delta) on a hydrogen atom bonded to a small highly electronegative element (like nitrogen, oxygen or fluorine) and the free electrons on another electronegative element of another molecule.
The hydrogen atom with the partial positive charge (delta) is known as the hydrogen bond donor, while the electronegative element, carrying lone electrons is called the hydrogen bond acceptor.
Let's take a deeper look at these terms:
1) Hydrogen bond donor
Using water (H₂O) as an example, the high electronegativity of the oxygen atom covalently bonded to the hydrogen atom draws the lone electron in the 1s orbital of the hydrogen atom, creating a partial positive charge (d⁺) on the hydrogen atom. This is what happens within one water molecule
2) Hydrogen bond acceptor
When two or more molecules of water interact, the partial positive charge (d⁺) on the hydrogen atom of one molecule, is attracted to the valence or free electrons on the oxygen atom of a nearby molecule of water thus creating a dipole-dipole intermolecular bond known as a hydrogen bond.
For the hydrogen bond to be effective, the electronegative atom bonded to the hydrogen acting as the hydrogen bond donor in the first water molecule needs to be small enough so as not to disrupt the 1s orbital of the hydrogen atom. The smaller the size of the electronegative atom, the stronger the partial negative charge created on the hydrogen atom.
The valence or free pair of electrons on the electronegative (oxygen) atom of the second molecule of water (hydrogen bond acceptor) is what attracts the partial positive charge on the hydrogen atom to create the hydrogen bond
A chemistry student needs 50.0ml of tetrahydrofuran for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of tetrahydrofuran is . Calculate the mass of tetrahydrofuran the student should weigh out. Be sure your answer has the correct number of significant digits.
Answer:
44.45 g of tetrahydrofuran.
Explanation:
From the question given above, the following data were obtained:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density of a substance is simply defined as the mass of the substance per unit volume of the substance. Mathematically, density is expressed as shown below:
Density = mass / volume
With the above formula, we shall determine the mass of tetrahydrofuran needed. This can be obtained as follow:
Volume of tetrahydrofuran = 50 mL
Density of tetrahydrofuran = 0.889 g/mL
Mass of tetrahydrofuran =?
Density = mass / volume
0.889 = mass / 50
Cross multiply
Mass = 0.889 × 50
Mass of tetrahydrofuran = 44.45 g
Therefore, the student should weigh out 44.45 g of tetrahydrofuran.
5) The stability of an atom is determined by
Re 1) P+n
2)P-n
3) P/N
4) N/P
Answer:
the answer p+n
Explanation:
Menthol is a crystalline substance with a peppermint taste and odor. When 0.533 g of menthol is dissolved in 25.0 g of cyclohexane, the freezing point of the solution is lowered by 2.84 ∘C. Look up the freezing point and f constant for cyclohexane in the Colligative Constants table. Calculate the molar mass of menthol.
Answer: The molar mass of menthol is 156.15 g/mol
Explanation:
Depression in freezing point is given by:
[tex]\Delta T_f=K_f\times m[/tex]
[tex]\Delta T_f=T_f^0-T_f=2.84^0C[/tex] = Depression in freezing point
[tex]K_f[/tex] = freezing point constant = [tex]20.8^0C/m[/tex]
m= molality
[tex]\Delta T_f=K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]
Weight of solvent (cyclohexane)= 25.0 g = 0.025 kg
Molar mass of solute (menthol) = ?
Mass of solute (menthol) = 0.533 g
[tex]2.84^0C=20.8\times \frac{0.533}{xg/mol\times 0.025}[/tex]
[tex]x=156.15g/mol[/tex]
The molar mass of menthol is 156.15 g/mol
Consider the following reaction where K. = 9.52 10 2 at 350 K.
CH,(g) + CC14(2)—2CH2Cl2(g)
A reaction mixture was found to contain 2.21*10-2 moles of CH4(E), 3.8710-2 moles of CC1,(g) and 1.06-10-2 moles of CH,C12(2), in
a 1.00 liter container
Is the reaction at equilibrium?
If not, what direction must it run in order to reach equilibrium?
The reaction quotient, Qc equals
The reaction
A. must run in the forward direction to reach equilibrium
B. must run in the reverse direction to reach equilibrium
C. is at equilibrium
Answer:
The correct answer is A :))
Name each of the following organic molecules. 
can someone help me?
Answer:
no, and next time take it right
Explanation:
A molten sample of 1.00kg of iron with a specific heat of 0.385J/g.K at 1000.K is immersed in a sample of water. If the water absorbs 270 kJ of heat what is the final temperature of the iron?
I need all the process.
Answer:
298. 7 K.
Explanation:
Hello!
In this case, since equation we use to compute the heat in a cooling or heating process is:
[tex]Q=mC(T_f-T_i)[/tex]
Whereas we are given the heat, mass, specific heat and initial temperature. Thus, we infer that we need to solve for the final temperature just as shown below:
[tex]T_f=T_i+\frac{Q}{mC}\\\\T_f=1000 K+\frac{-270000J}{1000g*0.385\frac{J}{g*K} } \\\\T_f=298.7 K[/tex]
It is important to notice that the iron release heat as water absorbs it, that is why it is taken negative.
Best regards!
If two reactant molecules collide with each other what two reasons might they not combine ?
Write the equilibrium expression of each chemical equation.
2H2S(g) 2H2(g) + S2(g)
Answer:
[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2
Explanation:
2H2S(g)⇋2H2(g)+S2(g)2H2S(g)⇋2H2(g)+S2(g)
The equilibrium constant expression in terms of concentrations is:
Kc=[H2]2[S2][H2S]2Kc=[H2]2[S2][H2S]2.
The equilibrium expression for the given reaction can be written in terms of equilibrium constant which is the ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
What is equilibrium?Equilibrium is a state for a reversible reaction where, the rate of forward reaction is equal to the rate of backward reaction. The rate of a reaction is the rate of decrease in the concentration of reactants or the rate of increase in the concentration of the products.
The given reaction at equilibrium state is written as:
[tex]\rm 2H_{2}S (g)\leftrightharpoons 2H_{2} (g)+ S_{2}(g)[/tex]
The equilibrium constant Kb is ratio of power of molar concentration of the product to the product of power of molar concentration of the reactants.
[tex]Kb = \rm \frac{[H_{2}S]^{2}}{[H_{2}]^{2} [S_{2}]}[/tex]
The rate of the reaction will be r = Kb [H₂]² [S₂].
To find more on equilibrium constant, refer here:
https://brainly.com/question/15118952
#SPJ2
Designer Andrea Tyson, a conservation planner from Naples, Florida, calls Arendt’s approach "capitalism mated with conservation." Explain why you think she would use this term.
Answer:
It uses this term to represent the economic use of land and nature, with minimal degradation and maximum environmental preservation.
Explanation:
Capitalism is an economic system that promotes the maximum economic exploitation of terrestrial resources. It is common for this exploitation to be strongly associated with environmental degradation, destruction of natural habitats, deforestation and death of fauna and flora. With this, we can consider that capitalism is one of the main formulators of environmental degradation, however many professionals have considered the term "capitalism mated with conservation," where terrestrial resources are exploited consciously and with the objective of reducing degradation to the maximum. environmental impact and maximize conservation.
Gizmo Warm-up In a chemical reaction, reactants interact to form products. This process is summarized by a chemical equation. In the Balancing Chemical Equations Gizmo, look at the floating molecules below the initial reaction: H2 O2 ---> H2O. How many atoms are in a hydrogen molecule (H2)
Answer:
There are two atoms in one hydrogen molecule.
Explanation:
Hello!
In this case, when going over chemical reactions, we need to realize about the amount of atoms of each element; thus, according to the given chemical reaction by which water is formed:
[tex]H_2+O_2\rightarrow H_2O[/tex]
It is seen there are two hydrogen atoms in the hydrogen molecule, two in oxygen and two hydrogen atoms and one oxygen atom in water; however, these reactions must be balanced according to the law of conservation of mass:
[tex]2H_2+O_2\rightarrow 2H_2O[/tex]
Which means we have two hydrogen molecules with two atoms each, one oxygen molecule with two atoms and two water molecules with two hydrogen atoms and one oxygen atom each.
Best regards!
A beaker in your laboratory drawer has an inside diameter of 6.8 cm and a height of 8.9 cm. Using the equation V= arh, calculate the volume of the beaker, expressed in milliliters.
Answer:
323.22 ml
Explanation:
Given that :
Diameter, d = 6.8cm
Height, h = 8.9cm
V = arh
Recall :
Volume, V = πr²h
Radius, r = diameter / 2 = 6.8 / 2 = 3.4cm
V = π * 3.4^2 * 8.9
V = 323.21961 cm³
Recall:
1ml = 1cm³
Hence,
323.21961 cm³ = 323.21961 ml
Volume = 323.22 ml
Please explain to me!!!
Answer:
nice handwrtting
Explanation:
Which of the following properties do solids and liquids have in common?
definite volume
definite temperature
definite smell
definite shape
Answer:
definite volume
Explanation:
Both solids and liquids have a definite volume: The difference is that solids have definite shape while liquids do not -liquids take the shape of their containers-.
Having a definite volume is why liquids cannot be compressed, a property that is used in hydraulic systems.