Answer:
See explanation
Explanation:
The process of electroplating an iron key with silver involves electrolysis.
The anode is a silver rod, the electrolyte is AgNO3 solution while the cathode is the iron key. A battery is connected to provide energy to drive the non-spontaneous electrochemical reaction.
Electrons flow from the anode to the cathode. Silver ions from the silver rod replenishes the silver that is deposited on the iron key in order to continue the electrolytic process.
The silver anode is therefore depleted in mass while the iron key increases in mass.
PLEASE HELP !!
Use the diagram below to answer the following questions.
PLEASE HELP
E TE
Figure B
In Figure B, which region contains the noble gas family of elements?
ОА
OD
ОС
OB
Noble gas located in the region D
Further explanationNoble gas are located in group 18 in the periodic table consisting of helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), have a stable electron configuration where the valence electrons are 8(full outer shell of electrons), so it is very hard to react because of its stability
If we look at the periodic system of the elements, the noble gases are on the far right, so that in Figure 8 it is located in area D
And the other region :
A : alkali elements(group 1),
B : alkaline earth elements(group 2)
C : halogen elements(group 17)
Use the periodic table to identify the number of valence electrons available for bonding for each of the following elements.
Answer: Edgy, 2020
Explanation: <3
Answer:
refer to picture below :)
Explanation:
Compare the potential energy of two atoms chemically bonded to their potential energy when separated.
Answer:
See explanation
Explanation:
The essence of chemical bonding is in order to attain minimum energy. The minimum energy state is the most stable state of a chemical system.
As the distance of separation between atoms decreases, the potential energy of the system decreases accordingly.
An optimum distance is reached when the two atoms attain the lowest potential energy. This is designated as the bond distance of the two atoms.
Hence two atoms have lower potential energy when bonded than when separated at large distance.
When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies
The potential energies of atoms chemically bonded is directly proportional to the distance between the atoms ( i.e as the distance between atoms decrease the potential energies of the atoms decreases accordingly) and this enables chemically bonded atoms to attain a more stable state.
The lower the potential energy of bonded atoms the more stable the element/compound becomes therefore it is necessary that bonded atoms attain the least possible potential energy.
Hence we can conclude that When two atoms are chemically bonded they have Lower potential energies while when they are separated they have higher potential energies .
Learn more : https://brainly.com/question/17637022
I WILL DIE I HAVE A KNIFE IN MY HAND. ANSWER WITH EXPLANATION. If the sound is high pitched, then the wave's frequency would have a:
A.high frequency, short wavelength
B. high frequency, long wavelength
C. low frequency, long wavelength
D. low frequency, short wavelength
Answer:
A
Explanation:
High frequency, short wavelength
2. What property of liquids explains why water beads up on the car surface?
Answer:
Surface tension is a force that pulls particles at the exposed surface of a liquid toward other liquid particles. Surface tension explains why water forms droplets, like the water droplet that has formed on the leaky faucet pictured in the Figure below.
An object is placed at 0 on a number line. It moves 3 units to the right, then 4 units to the left, and then 6 units to
the right. What is the displacement of the object?
1
5
7
13
Answer:
the answer will be five
Explanation:
i got this question on a test and i got it right
separation methods for coconut oil and water
Answer:
[tex]\huge\mathtt{{\colorbox{silver}{ANSWER~~~↴}}}[/tex]
we use a separating funnel to separate oil from water , we are using funnel because both water and oil both are immiscible liquids.
the process of separation of oil from water is called filtration ✔️
no copied answer :)
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
Which of the following reactants will generate products with a solution of phosphoric acid?
a
Al(s)
b
Cu(s)
c
Au(s)
d
Ag(s)
Answer:
A. Al(s)
Explanation:
what is the formula for this bond?
Someone help with this ions and isotopes worksheet?
Isotopes are atoms of the same element that have different numbers of neutrons. Protons are positively-charged particles found in the nucleus of an atom.
Electrons are negatively-charged particles found in the outer shell of an atom. The charge on an element is determined by the number of protons and electrons present in the atom.
a.) Li+: number of protons = 3
Number of electrons = 2
charge of Li+ = +1
b.) Be2+: number of protons = 4
Number of electrons = 2
charge of Be2+ = 2+
c.) C4+: number of protons = 8
Number of electrons = 4
charge of C4+ = 4+
d.) O2-: number of protons = 8
Number of electrons = 10
charge of O2- = -2
e.) N3-: number of protons = 7
Number of electrons = 10
charge of N3- = -3
f.) C4- : number of protons = 4
Number of electrons = 4
charge of C4- = -4
g.) 14C6: The mass number = 14
Atomic number = 6
Number of neutrons = 8
h.) 18O8: The mass number = 18
Atomic number = 8
Number of neutrons = 10
i.) 19F9: The mass number = 19
Atomic number = 9
Number of neutrons = 10
j.) 40Ca20: The mass number =40
Atomic number = 20
Number of neutrons = 20
k.) 37Cl17: The mass number = 37
Atomic number = 17
Number of neutrons = 20
l.) 238U92: The mass number = 238
Atomic number = 92
Number of neutrons = 146
To learn more about isotopes click here https://brainly.com/question/21536220
#SPJ1
How many molecules of H2O are in 8.54 moles of H2O?
Select one:
a. 5.14 * 10^24 molecules H2O
b. 2.86 * 10^23 molecules H2O
c. 6.02 * 10^23 molecules H2O
d. 5.14 * 10^23 molecules H2O
Answer:
[tex]\boxed {\boxed {\sf A. \ About \ 5.14 *10^{24} \ molecules \ H_2O}}[/tex]
Explanation:
To convert from moles to units, we must use Avogadro's Number: 6.022 * 10²³
This tells us the number of units (molecules of water in this problem) in 1 mole of a substance (water). We can use it as a ratio or fraction.
[tex]\frac{6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
Now, we can multiply this fraction by the moles of water (8.54) given.
[tex]8.54 \ mol \ H_2O*\frac{6.022 *10^{23}\ molecules \ H_2O}{1 \ mol \ H_2 O}[/tex]
When we multiply, the moles of water will cancel out.
[tex]8.54 *\frac{6.022 \ molecules \ H_2O}{1 \ }[/tex]
Since the fraction has a 1 as a denominator, we can remove it. The problem will be a simple multiplication problem.
[tex]8.54*6.022 \ molecules \ H_2O[/tex]
[tex]5.142788*10^{24} \ molecules \ H_2O[/tex]
The original measurement of 8.54 has 3 significant figures (8, 5, and 4). Therefore, we must round our answer to 3 sig figs, which is the hundredth place in this case.
The 2 in the thousandth place tells us to leave the 4 in the hundredth place.
[tex]5.14 *10^{24} \ molecules \ H_2 O[/tex]
There are about 5.14*10²⁴ molecules of water in 8.54 moles.
Answer:
5.14 x 10^24 molecules of H2O.
Explanation:
just took the test
Which statement is true about a reaction represented by a chemical equation that shows energy as a reactant?

A.
It absorbs energy.

B.
It releases energy.

C.
It is a replacement reaction.

D.
It is a combustion reaction.
Which of these are an atom's valence electrons?
Answer:
The Outer-most Electron shell contains the valence electrons.
Bonus Info:
Valence Electrons are used by atoms to make ionic bonds.
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell. We can write the configuration of oxygen's valence electrons as 2s²2p⁴.
Explanation:
ur welcome
i was doing this in school and i watched a video
What is the molecular formula of the molecule that has an empirical formula of CH2O and a molar mass of 120.12 g/mol
Answer:
C4H8O4
Explanation:
Let (CH20)x
C=1*12.01=12.01 (12.01, 1.01, 16.00 Avg mass of elements)
H=2*1.01=2.01
O=1*16.00=16.00
12.01 + 2.01 + 16.00 = 30.03
120.12/30,03=4
==> (CH2O)4 = C4H8O4
The molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex] is equal to [tex]C_4H_8O_4[/tex].
Given the following data:
Empirical formula = [tex]CH_2O[/tex]Molar mass = 120.12 g/mol.Scientific data:
Molar mass of oxygen = 16 g/mol.Molar mass of hydrogen = 1 g/mol.Molar mass of carbon = 12 g/mol.To determine the molecular formula of the molecule that has an empirical formula of [tex]CH_2O[/tex]:
First of all, we would find the molar mass of [tex]CH_2O[/tex]:
[tex]CH_2O =12 +(1\times2)+16\\\\CH_2O =30\;g/mol[/tex]
For molecular formula:
[tex](CH_2O)n = 120.12\\\\30n = 120.12\\\\n=\frac{120.12}{30}[/tex]
n = 4.0
[tex](CH_2O)_4 = C_4H_8O_4[/tex]
Read more: https://brainly.com/question/21280037
As shown by the periodic table, why do the elements potassium and sodium have similar chemical properties?
Displacement can be added to get the total
a) velocity
b) distance
c) speed
d) acceleration
What is environment?
Answer:
where an organism lives which includes everything that surrounds and influences the organism.
how is wind energy captured?
where is wind energy found?
how is water energy captured?
where is water energy found?
plz use the passage i put. plz and thank you!!!!!
During a chemical or physical change, energy may be...
a. created into another form
b. destroyed and reinvented into another form
c. converted into another form
d. disappeared
Answer: C: Converted into another form
Explanation: pues es esa calale y si va a hacer
During a chemical or physical change, energy is converted to another form. Energy cannot be created or destroyed. During a chemical reaction, physical change the energy and mass are conserved.
What is law of conservation of energy ?According to the law of conservation of energy energy can neither be crated nor be destroyed. Hence, the total energy of a system is always conserved.
However, energy can be transformed from one form to the other. Therefore, the energy lost in one form is gained in another form. For example, in all electrical devices, the electrical energy is converting to other forms of energy such as light, thermal , mechanical etc.
Similarly, during a chemical reaction, the energy released by a reaction system is equal to the energy absorbed by other reacting system. Similarly in electrochemical cells the chemical energy is converting to electrical energy.
Find more on energy transformation:
https://brainly.com/question/17589256
#SPJ6
The units of a formula mass are
a. amu
b. micrograms
c. moles
d. grams
Answer:
the units of a formula mass are amu.
Can someone please help me out
Answer:
a. increases
b. increases
c. decreases
What caused space technology to improve so quickly?
Answer:
“spinoff”
Explanation:
Here is just a sampling of the many “spinoff” technologies, as NASA refers to them, resulting from space research and development that we now use in everyday life.
what's the molar mass of Li3p
Answer:
51.79g Li₃P.
Explanation:
Li has a molar mass of 6.94 g (since there are 3, you multiply it 3 times) and P has a molar mass of 30.97 g. 6.94(3) + 30.97 = 51.79g.
HELP IN 8TH GRADE ADV SCIENCE
Answer:
protons: 36
neutrons: 48
electrons: 36
Which substance is correctly identified as a homogeneous or heterogeneous mixture?
A. salad -- heterogeneous
B. milk --- heterogeneous
C. river water --- homogeneous
D. beach sand --- homogeneous
Answer:
A
Explanation:
A salad with lettuce, cheese, seeds, tomatoes, broccoli, and other vegetables is an example of a heterogeneous mixture.
Milk is not mixed with anything so that is incorrect
River water is mixed in with dirt and minerals so this one is incorrect
Beach sand is incorrect because you can see colored particles.
In this reaction, how does the rate of forward reaction vary with the concentration of the product?
2H2S(g) ⇌ 2H2(g) + S2(g)
It increases with an increase in the concentration of S2(g).
It decreases with a decrease in the concentration of H2(g).
It increases with a decrease in the concentration of H2(g).
It decreases with an increase in the concentration of S2(g).
It decreases with increase in the concentration of H2(g).
Answer:
c d e
Explanation:
Answer:
C D E
Explanation:
#platogang
What is the name given to the group 0 elements
Answer:
the noble gases
What would happen if a neutron was added to Lithium (7)
Answer:
if you add a neutron to lithium-7 it becomes a compound nucleus of lithium-8
What is the molar mass of phosphorus pentachloride and uranium hexafluoride?
Answer:
PCl₅ = 208.22g/mol. UF₆ = 352.03g/mol.
Explanation:
Find the atomic mass of each element–and if there's a subscript (you multiply the atomic mass by that much). P= 30.97g, Cl= 35.45g; 30.97+35.45(5) = 208.22g [same idea with UF₆]
Please I need help I really don’t get this lol
Answer:
The pointer pointing to the grey and white balls are either proton or nuetron i van't really tell cause their grey and white.
The whole clster of balls is the Nucleus
The black balls on the lines are electrons
And the lines are the energy level
Explanation: