The major organic product(s) for each of the following reactions:
a)The major organic product of this reaction is methyl bromide (CH3Br), with water (H2O) as a byproduct
b)The major organic product of this reaction is the nitrile functional group (-CN) replacing the leaving group (Br) on the starting molecule.
Reaction 1:
Reactants:
HBr (hydrogen bromide)
CH3OH (methanol)
This reaction is a substitution reaction known as the Williamson-ether synthesis.
In this case, HBr reacts with methanol (CH3OH) to form an ether product.
The major organic product of this reaction is methyl bromide (CH3Br), with water (H2O) as a byproduct:
CH3OH + HBr -> CH3Br + H2O
Reaction 2:
Reactants:
NaCN (sodium cyanide)
HMPA (hexamethylphosphoramide)
This reaction is an example of nucleophilic substitution.
NaCN acts as the nucleophile and HMPA is a polar aprotic solvent that enhances the reactivity of the reaction.
The major organic product of this reaction is the nitrile functional group (-CN) replacing the leaving group (Br) on the starting molecule.
Without further information about the specific molecule or reaction conditions, it's challenging to provide a detailed structure.
However, the general reaction can be represented as follows:
R-Br + NaCN -> R-CN + NaBr
In this reaction, R represents the organic group attached to the bromine (Br) atom.
To know more about organic, visit:
https://brainly.com/question/31040922
#SPJ11
QUESTION 7 What is the limiting reagent in the following reaction if 47.7 grams of C 12H 26 is reacted with 281.0 grams of oxygen? 2C 12H 26 (1) +370 2 (g) -> 24CO 2 (g) + 26H 20 (g) H2O CO2 02 C12H26
The limiting reactant is the chemical that limits the amount of product obtained from a reaction. When one of the reactants is used up, the reaction ceases, and no more products are formed.
The amount of product obtained is determined by the quantity of the limiting reactant, not the abundance of the other reactant. The limiting reactant is calculated by comparing the amount of moles of each reactant in the reaction.
The mole ratio from the balanced chemical equation indicates the stoichiometry of the reaction, which reveals the limiting reactant. We may determine the amount of moles in the reaction by utilizing the molecular weights of the reactants.
To know more about limiting visit:
https://brainly.com/question/12211820
#SPJ11
Q-3 Determine the fugacity in atm for pure ethane at 310 K and 20.4 atm and change in the chemical potential between this state and a second state od ethane where temperature is constant but pressure is 24 atm.
The fugacity in atm for pure ethane at 310 K and 20.4 atm is given by the equation: f = 20.4 exp (-Δg1/RT). The change in chemical potential between this state and a second state of ethane where the temperature is constant but the pressure is 24 atm is -0.0911RT.
Fugacity is a measure of the escaping tendency of a component in a mixture, which is defined as the pressure that the component would have if it obeyed ideal gas laws. It is used as a correction factor in the calculation of equilibrium constants and thermodynamic properties such as chemical potential. Here we need to determine the fugacity in atm for pure ethane at 310 K and 20.4 atm and the change in the chemical potential between this state and a second state of ethane where the temperature is constant but the pressure is 24 atm. So, using the formula of fugacity: f = P.exp(Δu/RT) Where P is the pressure of the system, R is the gas constant, T is the temperature of the system, Δu is the change in chemical potential of the system. Δu = RT ln (f / P)The chemical potential at the initial state can be calculated using the ideal gas equation as: PV = nRT
=> P
= nRT/V
=> 20.4 atm
= nRT/V
=> n/V
= 20.4/RT The chemical potential of the system at the initial state is:
Δu1 = RT ln (f/P)
= RT ln (f/20.4) Also, we know that for a pure substance,
Δu = Δg. So,
Δg1 = Δu1 The change in pressure is 24 atm – 20.4 atm
= 3.6 atm At the second state, the pressure is 24 atm.
Using the ideal gas equation, n/V = 24/RT The chemical potential of the system at the second state is: Δu2 = RT ln (f/24) = RT ln (f/24) The change in chemical potential is Δu2 – Δu1 The change in chemical potential is
Δu2 – Δu1 = RT ln (f/24) – RT ln (f/20.4)
= RT ln [(f/24)/(f/20.4)]
= RT ln (20.4/24)
= - 0.0911 RT Therefore, the fugacity in atm for pure ethane at 310 K and 20.4 atm is:
f = P.exp(Δu/RT)
=> f
= 20.4 exp (-Δu1/RT)
=> f
= 20.4 exp (-Δg1/RT) And, the change in the chemical potential between this state and a second state of ethane where the temperature is constant but pressure is 24 atm is -0.0911RT. Therefore, the fugacity in atm for pure ethane at 310 K and 20.4 atm is given by the equation: f = 20.4 exp (-Δg1/RT). The change in chemical potential between this state and a second state of ethane where the temperature is constant but the pressure is 24 atm is -0.0911RT.
To know more about chemical potential visit:-
https://brainly.com/question/31100203
#SPJ11
6.2 Calculate the pH of the following solutions: a. [H3O+] = 5.6 x 10-³ b. [H3O+] = 3.8 x 104 c. [H3O+] = 2.7 x 10-5 d. [H3O+] = 1.0 x 10-⁹ S 1
The pH of the given solutions can be calculated using the formula pH = -log[H₃0₊]. For the provided values of [H₃0₊], the pH values are as follows: (a) pH = 2.25, (b) pH = -0.58, (c) pH = 4.57, and (d) pH = 9.
The pH of a solution is a measure of its acidity or alkalinity and is defined as the negative logarithm (base 10) of the concentration of hydronium ions, [H₃0₊]. The formula to calculate pH is pH = -log[H3O+].
(a) For [H₃0₊] = 5.6 x 10⁻³, the pH is calculated as pH = -log(5.6 x 10⁻³) = 2.25.
(b) For [H₃0₊] = 3.8 x 10⁴, the pH is calculated as pH = -log(3.8 x 10⁴) = -0.58.
(c) For [H₃0₊] = 2.7 x 10⁻⁵, the pH is calculated as pH = -log(2.7 x 10⁻⁵) = 4.57.
(d) For [H₃0₊] = 1.0 x 10⁻⁹, the pH is calculated as pH = -log(1.0 x 10⁻⁹) = 9.
These pH values indicate the acidity or alkalinity of the solutions. pH values below 7 are acidic, while pH values above 7 are alkaline. A pH of 7 is considered neutral.
To learn more about pH click here:
brainly.com/question/2288405
#SPJ11
100.0 g of copper(II) carbonate was
heated until it decomposed completely. The gas was collected and
cooled to STP, what is the volume of CO2 produced?
[Cu = 63.55 g/mol, C= 12.01 g/mol, O=
16.00 g/mo
To calculate the volume of carbon dioxide (CO2) produced when 100.0 g of copper(II) carbonate (CuCO3) decomposes completely, we need to follow these steps:
1. Calculate the molar mass of copper(II) carbonate:
Cu: 1 atom * 63.55 g/mol = 63.55 g/mol
C: 1 atom * 12.01 g/mol = 12.01 g/mol
O: 3 atoms * 16.00 g/mol = 48.00 g/mol
Total molar mass = 63.55 g/mol + 12.01 g/mol + 48.00 g/mol = 123.56 g/mol
2. Calculate the number of moles of copper(II) carbonate:
moles = mass / molar mass = 100.0 g / 123.56 g/mol
3. Use stoichiometry to determine the number of moles of CO2 produced. From the balanced equation:
CuCO3(s) -> CuO(s) + CO2(g)
we can see that for every 1 mole of CuCO3, 1 mole of CO2 is produced. Therefore, the number of moles of CO2 produced is equal to the number of moles of copper(II) carbonate.
4. Convert the number of moles of CO2 to volume at STP using the ideal gas law:
PV = nRT
P = 1 atm (standard pressure)
V = ?
n = moles of CO2
R = 0.0821 L·atm/(mol·K) (ideal gas constant)
T = 273.15 K (standard temperature)
V = nRT / P = moles * 0.0821 L·atm/(mol·K) * 273.15 K / 1 atm
Substituting the value of moles from step 2, you can calculate the volume of CO2 produced at STP.
To know more about Stoichiometry, visit;
https://brainly.com/question/14935523
#SPJ11
Under what conditions would a golgi tendon be very active, but a muscle spindle not very active?
a. A muscle at rest
b. A muscle stretched with weight on it
c. A muscle contracted with weight on it
d. A muscle contracted with no weight on it
Voltage-gated potassium channels
a. Are closed during the falling phase of the action potential
b. open at the peak of the action potential
c. Are open during resting potential
d. Allow K+ ions to flow through once threshold is reached
Under the condition of a muscle at rest, the Golgi tendon organ (GTO) would be very active, but the muscle spindle would not be very active.
(a) A muscle at rest: When a muscle is at rest, the Golgi tendon organ (GTO) would be highly active. The GTO is located at the junction between the muscle and tendon and is sensitive to changes in muscle tension. During rest, there is minimal tension in the muscle, and the GTO detects this low tension. In response, the GTO sends inhibitory signals to the muscle, preventing excessive contraction.
On the other hand, the muscle spindle is not very active when the muscle is at rest. The muscle spindle is responsible for detecting changes in muscle length. Since the muscle is not being stretched or experiencing significant movement at rest, the muscle spindle is not actively sending signals to the nervous system.
In summary, during muscle rest, the Golgi tendon organ is highly active due to low muscle tension, while the muscle spindle is not very active since there is no significant stretch or movement.
Learn more about the Golgi tendon organ here: brainly.com/question/32567943
#SPJ11
When steel and zinc were connected, which one was the cathode?
Steel
Zinc
☐ neither
both
When steel and zinc were connected, zinc is the cathode. The term cathode refers to the electrode that is reduced during an electrochemical reaction.
The electrons are moved from the anode to the cathode during an electrochemical reaction in order to maintain a current in the wire that links the two electrodes.
According to the galvanic series, zinc is more active than iron, meaning that it is more likely to lose electrons and be oxidized. As a result, when steel and zinc are connected, zinc will act as the anode and lose electrons, whereas iron (steel) will act as the cathode and receive the electrons transferred by zinc.
To know more about electrochemical reaction visit:-
https://brainly.com/question/13062424
#SPJ11
hi
can you shownme how to do these problems i would greatly appreciate
it
and will give you a review
The initial activity for a radionuclide with a half life of 5.26 days is 15.0 mci. Calculate the activity after 158 hours. A radionuclide with a decay constant of 0.05/month has an activity of 26.0
1. The activity after 158 hours is 6.3 mci
2. The activity six months ago is 35.03 mg Ra Eq
1. How do i determine the activity after 158 hours?First, we shall calculate the number of half lives. This is shown below:
Half-life (t½) = 5.26 days = 5.26 × 24 = 126.24 hoursTime (t) = 158 hours Number of half-lives (n) =?n = t / t½
= 158 / 126.24
= 1.25
Finally, we shall determine the activity after 158 hours. Details below:
Initial activity (N₀) = 15.0 mci.Number of half-lives (n) = 1.25Activity after 158 hours (N) = ?[tex]N = \frac{N_{0} }{2^{n}}\\ \\= \frac{15}{2^{1.25} } \\\\= 6.3\ mci[/tex]
2. How do i determine the activity six months ago?First, we shall obtain the half-life. Details below:
Decay constant (λ) = 0.05 /monthHalf-life (t½) = ?t½ = 0.693 / λ
= 0.693 / 0.05
= 13.86 months
Next, we shall calculate the number of half lives. This is shown below:
Half-life (t½) = 13.86 monthsTime (t) = 6 monthsNumber of half-lives (n) =?n = t / t½
= 6 / 13.86
= 0.43
Finally, we shall obtain the activity six months ago. Details below:
Initial activity (N₀) = 26.0 mg Ra EqNumber of half-lives (n) = 0.43Activity after 158 hours (N) = ?[tex]N_{0} = N *2^{n}\\\\= 26*2^{0.43}\\\\= 35.03\ mg\ Ra\ Eq[/tex]
Learn more about amount remaining:
https://brainly.com/question/28440920
#SPJ4
Complete question:
1. The initial activity for a radionuclide with a half life of 5.26 days is 15.0 mci. Calculate the activity after 158 hours.
2. A radionuclide with a decay constant of 0.05/month has an activity of 26.0 mg Ra Eq. what was the activity six months ago?
Which of the following is not a hybrid orbital? a. sp⁴
b. sp³ c. sp² d. sp
The hybridization which is not considered as a hybridization state in the context of hybrid orbital is sp⁴. Hence, the correct option is a.
Hybrid orbitals are formed through the hybridization process, which involves the mixing of atomic orbitals to create new orbitals that have different shapes and energy characteristics. These hybrid orbitals are labeled based on the types of atomic orbitals involved in the hybridization.
Among the options given, sp⁴ is not a valid hybrid orbital. The labeling of hybrid orbitals follows a specific pattern. The first letter represents the type of orbital involved (s or p), and the superscript number indicates the total number of hybrid orbitals formed. However, the number in the subscript does not correspond to a specific type of hybridization. It is used to denote the number of unhybridized p orbitals remaining after hybridization.
The correct hybrid orbitals among the options are:
a. sp³ ( sp³ hybridization involves the mixing of one s orbital and three p orbitals)
b. sp² (sp² hybridization involves the mixing of one s orbital and two p orbitals)
c. sp (sp hybridization involves the mixing of one s orbital and one p orbital)
Learn more about atomic orbitals here:
https://brainly.com/question/29561958
#SPJ11
10. Find the ΔH for the reaction below, given the following
reactions and subsequent ΔH values:
CO2(g) → C(s) + O2(g)
H2O(l) → H2(g) +
1/2O2(g) ΔH = 643 kJ
C2
To find the ΔH for the given reaction, we need to manipulate and combine the provided reactions in a way that cancels out the intermediate species. The ΔH for the reaction CO2(g) → C(s) + O2(g) can be determined by combining the given reactions and their corresponding ΔH values. The ΔH for the reaction CO2(g) → C(s) + O2(g) is 1679.5 kJ/mol.
We have the following reactions, intermediate species and ΔH values:
CO2(g) → C(s) + O2(g)
H2O(l) → H2(g) + 1/2O2(g) (ΔH = 643 kJ)
First, we need to reverse reaction 1 to get C(s) + O2(g) → CO2(g). By reversing the reaction, we also change the sign of its ΔH value. Therefore, the reversed reaction becomes ΔH = -ΔH1.
Next, we need to manipulate reaction 2 to obtain CO2(g) on the reactant side. To do this, we multiply the entire reaction by 2: 2H2O(l) → 2H2(g) + O2(g). We also need to multiply the ΔH value by 2, resulting in 2ΔH2.
Now, we can add the manipulated reactions together:
C(s) + O2(g) + 2H2O(l) → CO2(g) + 2H2(g) + O2(g)
To find the ΔH for the overall reaction, we sum the ΔH values of the individual reactions:
ΔH = -ΔH1 + 2ΔH2
Substituting the given ΔH values, we have:
ΔH = -(-393.5 kJ/mol) + 2(643 kJ/mol) = 1679.5 kJ/mol
Therefore, the ΔH for the reaction CO2(g) → C(s) + O2(g) is 1679.5 kJ/mol.
To know more about intermediate species click here :
https://brainly.com/question/29032151
#SPJ11
show all work.
5. How many grams of Na₂CO3 are needed to make a 50.0 mL of 1.7 M sodium carbonate (Na₂CO3) solution?
To make a 50.0 mL solution of 1.7 M sodium carbonate (Na₂CO3), we need to determine the mass of Na₂CO3 required.
To calculate the mass of Na₂CO3 needed, we can use the formula:
Mass = Concentration x Volume x Molar Mass
First, we convert the given volume from milliliters to liters:
Volume = 50.0 mL = 50.0/1000 L = 0.05 L
Next, we substitute the given concentration and volume values into the formula:
Mass = 1.7 M x 0.05 L x Molar Mass of Na₂CO3
The molar mass of Na₂CO3 can be calculated by adding the atomic masses of sodium (Na), carbon (C), and three oxygen (O) atoms:
Molar Mass of Na₂CO3 = (2 x Atomic Mass of Na) + Atomic Mass of C + (3 x Atomic Mass of O)
After obtaining the molar mass value, we can substitute it into the formula and perform the calculation to determine the mass of Na₂CO3 required to make the 50.0 mL solution of 1.7 M sodium carbonate.
To know more about sodium carbonate click here:
https://brainly.com/question/24475802
#SPJ11
A natural gas-fired Brayton Cycle with air,Br = 0.72 kgs! (a) Ambient air at 1.00 bar and 300 K is taken in. (b) A compressor with an inlet-to-outlet pressure ratio of 1:19. (C) Intercooling, decreasing the temperature by AT = -150K. (d) A second-stage compressor with a pressure ratio of 1:5. (e) Regeneration between the compressor and the combustor, increasing the temperature by 85 K (1) Combustion at constant pressure to 1800 K. (9) A two-stage turbine system with reheat between the stages. Reheat occurs at 12.4 bar and raises the temperature to 1600 K. (h) Discharge to a heat exchanger at 1.50 bar, where waste heat is used to warm steam for the Rankine Cycle. The outlet temperature from this heat exchanger is 600 K. (1) From that heat exchanger, discharge to the regeneration heat exchanger in part le. 2. A water-steam Rankine Cycle with water,Ra = 1.06 kgs! (a) A two-stage turbine system, with reheat between the stages. The first turbine inlet is at 560 °C and 160 bar. Reheat occurs at 40.0 bar up to 520°C. The second-stage turbine outlet is 2.00 bar. (b) Cooling at constant pressure in a condenser via heat exchange with ambient air to saturated liquid. The air used in condenser cooling must not exceed 400K when it is released from the power plant. (c) A pump from the low-side pressure to the high-side pressure. (d) Heating in a boiler at constant pressure, using the waste heat from the Brayton Cycle in a first stage and natural gas combustion in a second stage to reach the turbine inlet temperatures. Turbine reheat occurs in the second stage. All turbines are 76% isentropically efficient. All turbines are used to spin electrical generators that are 95% efficient - 95% of work done on the generator is converted to electrical power. For the Brayton cycle, air-standard analysis may be used (not cold-air-standard!). Compressors and pumps have isentropic efficiencies of 80%. Combustion is 45% efficient - that is, 45% of the fuel's heating value is delivered into the working fluid. The heat of combustion of natural gas is 51.0 MJ kg
The given problem involves a combined Brayton Cycle and Rankine Cycle power plant. The Brayton Cycle uses natural gas as fuel and air as the working fluid, while the Rankine Cycle uses water and steam.
The key components and processes of both cycles are described, including compressors, turbines, intercooling, reheat, heat exchange, and combustion. Various efficiencies and conditions are provided, such as isentropic efficiencies of compressors and turbines, combustion efficiency, and generator efficiency. The objective is to analyze the performance and energy conversion of the power plant.
The problem presents a combined power plant consisting of a Brayton Cycle and a Rankine Cycle. The Brayton Cycle utilizes a natural gas-fired combustion process with air as the working fluid. The cycle begins with ambient air at 1.00 bar and 300 K, which is compressed by a two-stage compressor with a pressure ratio of 1:19. Intercooling is performed to decrease the temperature by AT = -150 K. Then, a second-stage compressor with a pressure ratio of 1:5 is used. Regeneration between the compressor and the combustor increases the temperature by 85 K. Combustion takes place at constant pressure, raising the temperature to 1800 K. A two-stage turbine system with reheat between the stages is used, where the reheat occurs at 12.4 bar and raises the temperature to 1600 K. The discharge from the turbine goes to a heat exchanger at 1.50 bar, which utilizes waste heat for steam generation in the Rankine Cycle. The outlet temperature from this heat exchanger is 600 K, and the flow is then directed to the regeneration heat exchanger.
The Rankine Cycle, which uses water and steam, includes a two-stage turbine system with reheat between the stages. The first turbine stage operates with an inlet temperature of 560 °C and 160 bar, while the reheat occurs at 40.0 bar up to 520 °C. The second turbine stage's outlet pressure is 2.00 bar. Cooling at constant pressure takes place in a condenser via heat exchange with ambient air, with the constraint that the air temperature must not exceed 400 K upon release from the power plant. A pump is employed to raise the pressure from the low side to the high side. Heating occurs in a boiler at constant pressure, using waste heat from the Brayton Cycle and natural gas combustion to reach the turbine inlet temperatures. Turbine reheat takes place in the second stage.
To evaluate the performance of the power plant, various efficiencies and conditions are provided. The isentropic efficiencies of compressors and turbines are stated as 80%. The combustion process is reported to be 45% efficient, meaning that 45% of the fuel's heating value is transferred to the working fluid. The generator efficiency is 95%, indicating that 95% of the work done on the generator is converted to electrical power. The heat of combustion for natural gas is given as 51.0 MJ/kg.
In summary, the problem describes a combined power plant employing a Brayton Cycle and a Rankine Cycle. It outlines the key components, processes, and conditions for each cycle and provides various efficiencies for compressors, turbines, combustion, and generators. The objective is to analyze the energy conversion and performance of the power plant based on the given parameters.
To learn more about Rankine Cycle: -brainly.com/question/31476663
#SPJ11
A 30 g sample of potato chips is placed in a bomb calorimeter with a heat capacity of 1.80 kJ/°C, and the bomb calorimeter is immersed in 1.5 L of water. Calculate the energy contained in the food pe
Answer: To calculate the energy contained in the food sample, we can use the concept of calorimetry. Calorimetry is the science of measuring heat changes in a system. In this case, we have a bomb calorimeter, which is a device used to measure the heat of combustion of a substance.
Explanation:
The energy contained in the food can be determined by measuring the heat transferred from To calculate the energy contained in the food sample, we need to consider the heat transferred from the food to the water in the bomb calorimeter. The equation we can use is:
q = m * C * ΔT
q is the heat transferred (energy contained in the food)
m is the mass of the water (1.5 kg, since 1 L of water is approximately 1 kg)
C is the heat capacity of the bomb calorimeter (1.80 kJ/°C or 1800 J/°C)
ΔT is the change in temperature
The change in temperature, ΔT, can be determined by measuring the initial and final temperatures of the water after the combustion of the food.
However, the given information does not specify the change in temperature or the initial and final temperatures. Without these values, it is not possible to calculate the energy contained in the food accurately. Please provide the necessary temperature data to proceed with the calculation.
To know more about calorimetry visit:
https://brainly.com/question/11477213
#SPJ11
How many stereoisomers can be drawn for the following molecule? 1 4 2 0 3 Br H- H3C H -Br CH3
For the given molecule, there are two stereoisomers that can be drawn.
To determine the number of stereoisomers for a molecule, we need to identify the presence of chiral centers or stereogenic centers. These are carbon atoms that are bonded to four different substituents, leading to the possibility of different spatial arrangements.
In the given molecule, the carbon labeled 2 is a chiral center because it is bonded to four different substituents: Br, H, H3C, and CH3.
The two stereoisomers that can be drawn are the result of different spatial arrangements around the chiral center. We can represent these stereoisomers as:
1. Br H
|
H3C CH3
2. Br CH3
|
H3C H
In the first stereoisomer, the substituents H3C and CH3 are on the same side of the chiral center, while in the second stereoisomer, they are on opposite sides. These different spatial arrangements give rise to two distinct stereoisomers.
Therefore, the given molecule can have two stereoisomers.
To know more about stereoisomers click here:
https://brainly.com/question/31492606
#SPJ11
for
each question can you please lable and show working out
2. (a) Distinguish between representative sample and a laboratory sample; (2 marks) (b) Distinguish between homogenous and heterogeneous mixtures; (2 marks) (c) Hence, discuss why homogeneity plays su
Homogeneity is essential for obtaining reliable data, achieving consistency in products and processes, and facilitating accurate interpretations and decision-making
(a) Distinguishing between representative sample and a laboratory sample:
A representative sample is a subset of a population or a larger sample that accurately represents the characteristics and properties of the entire population.
It is obtained by following proper sampling techniques to ensure that it is unbiased and reflects the overall composition of the population.
A representative sample is essential in scientific research and analysis as it allows for generalizations and conclusions to be drawn about the entire population based on the characteristics observed in the sample.
On the other hand, a laboratory sample refers to a specific sample collected or prepared in a controlled laboratory setting for analysis or experimentation.
Laboratory samples are often smaller in scale and are specifically chosen or created for a particular purpose, such as testing the properties or behavior of a substance or material under controlled conditions.
Laboratory samples may not always be representative of the larger population or real-world conditions, but they are designed to provide valuable insights and data for scientific investigations.
(b) Distinguishing between homogeneous and heterogeneous mixtures:
A homogeneous mixture is a mixture where the components are uniformly distributed at the molecular or microscopic level. In a homogeneous mixture, the composition and properties are the same throughout the sample.
Examples of homogeneous mixtures include saltwater, air, and sugar dissolved in water.
In contrast, a heterogeneous mixture is a mixture where the components are not uniformly distributed and can be visually distinguished.
In a heterogeneous mixture, different regions or phases exist within the sample, each with its own composition and properties.
Examples of heterogeneous mixtures include a mixture of oil and water, a salad dressing with separate layers, and a mixture of sand and pebbles.
(c) The Importance of Homogeneity:
Homogeneity is important in various scientific and practical contexts. In scientific research, homogeneity ensures consistent and reliable results by minimizing variations and confounding factors. It allows for accurate measurements, precise analyses, and the ability to generalize findings to larger populations.
In manufacturing and quality control, homogeneity is crucial for ensuring uniformity and consistency in products. It helps in maintaining product standards, meeting specifications, and avoiding variations that could impact the performance or quality of the final product.
Homogeneity also plays a role in everyday life. For example, in cooking, a homogeneous mixture ensures that ingredients are evenly distributed, leading to well-balanced flavors.
In environmental monitoring, the homogeneity of samples allows for accurate assessments of pollutant levels or the presence of contaminants.
Overall, homogeneity is essential for obtaining reliable data, achieving consistency in products and processes, and facilitating accurate interpretations and decision-making in various scientific, industrial, and everyday contexts.
Learn more about Homogeneity from the given link
https://brainly.com/question/16938448
#SPJ11
(NO TABULATED VALUE PROVIDED.. NOT SURE WHAT HE'S TALKING
ABOUT)
Using the tabulated values of So supplied in thermodynamic
tables, calculate the value of So
for the reaction: C2H4(g) + H2(g) C2H6(g)
The standard molar entropy change (ΔS°) for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) can be calculated using the tabulated values of entropy (S°) for the individual compounds involved.
To calculate the standard molar entropy change (ΔS°) for the given reaction, we need to subtract the sum of the standard molar entropies of the reactants from the sum of the standard molar entropies of the products.
From the thermodynamic tables, we find the following tabulated standard molar entropies (S°) values:
- C₂H₄(g): 219.5 J/(mol·K)
- H₂(g): 130.7 J/(mol·K)
- C₂H₆(g): 229.5 J/(mol·K)
The reactants, C₂H₄(g) and H₂(g), contribute a total entropy of (219.5 + 130.7) J/(mol·K), while the product, C₂H₆(g), has an entropy of 229.5 J/(mol·K).
Therefore, the standard molar entropy change (ΔS°) for the reaction can be calculated as follows:
ΔS° = [S°(C₂H₆(g))] - [S°(C₂H₄(g)) + S°(H₂(g))]
= 229.5 J/(mol·K) - (219.5 J/(mol·K) + 130.7 J/(mol·K))
= -121.7 J/(mol·K)
Hence, the value of ΔS° for the reaction C₂H₄(g) + H₂(g) → C₂H₆(g) is -121.7 J/(mol·K). The negative sign indicates that the reaction results in a decrease in entropy, which is expected for the formation of a more ordered molecule (C₂H₆) from the reactants (C₂H₄ and H₂).
Learn more about entropy change here:
https://brainly.com/question/32768547
#SPJ11
I need help ASAP!!
Please provide me with detailed answers. Thank you!!
1. Giving this reaction:
Fe(NO3)3•9H2O(aq) + 3 KHC2O4(aq) + 3 KOH(aq) →
K3[Fe(C2O4)3]•3H2O(s) (tris) + 3 KNO3(aq) + 9 H2O(
Fe(NO3)3·9H2O(aq) + 3KHC2O4(aq) + 3KOH(aq) → K3[Fe(C2O4)3]·3H2O(s) (tris) + 3KNO3(aq) + 9H2OIron (III) nitrate nonahydrate (Fe(NO3)3·9H2O) reacts with potassium hydrogen oxalate (KHC2O4) and potassium hydroxide (KOH) to give tris(oxalato)iron(III) (K3[Fe(C2O4)3]) along with potassium nitrate (KNO3) and water (H2O).
This reaction is a double displacement reaction or precipitation reaction, and the salt formed is tris(oxalato)iron(III) which is a green-colored complex. The equation is balanced, and the stoichiometry is maintained.
The following is the explanation of the reaction:Fe(NO3)3.9H2O + 3KHC2O4 + 3KOH → K3[Fe(C2O4)3].3H2O (s) + 3KNO3 + 9H2O
Here, iron (III) nitrate nonahydrate (Fe(NO3)3.9H2O) is a compound made up of one mole of Fe(NO3)3 and nine moles of water (H2O), and potassium hydrogen oxalate (KHC2O4) is an acid salt of oxalic acid. The reaction takes place in aqueous solutions of the two compounds. When Fe(NO3)3.9H2O is added to a solution of KHC2O4 and KOH, a double displacement reaction occurs. Fe(NO3)3 reacts with KOH to form Fe(OH)3 and KNO3. KHC2O4 reacts with Fe(OH)3 to form Fe(C2O4)3 and H2O.The complex K3[Fe(C2O4)3] is a tris(oxalato)iron(III) compound with a green colour. It is a coordination complex formed by the binding of Fe(III) ions with three oxalate ions. Finally, 3KNO3 and 9H2O are produced as products of the reaction, and the net ionic equation of the reaction is:
Fe3+ + 3C2O42- → Fe(C2O4)3. 3H2O (s)
Learn more about nitrate here:
https://brainly.com/question/24651774
#SPJ11
The AG of ATP hydrolysis in a test tube under standard conditions is -7.3 kcal/mol. The AG for the reaction A + B = C under the same conditions is +4.0 kcal/mol. What is the overall free-energy change for the coupled reactions under these conditions? a.-7.3 kcal/mol. b.-11.3 kcal/mol. c. -3.3 kcal/mol. d.+3.3 kcal/mol.
The correct option is (c) -3.3 kcal/mol.The overall free-energy change for coupled reactions can be determined by summing up the individual free-energy changes of the reactions involved.
In this case, the reactions are ATP hydrolysis (-7.3 kcal/mol) and A + B = C (+4.0 kcal/mol).
To calculate the overall free-energy change, we add the individual free-energy changes:
Overall ΔG = ΔG(ATP hydrolysis) + ΔG(A + B = C)
= -7.3 kcal/mol + 4.0 kcal/mol
= -3.3 kcal/mol
Therefore, the overall free-energy change for the coupled reactions under these conditions is -3.3 kcal/mol.
To know more about Free-energy visit-
brainly.com/question/31170437
#SPJ11
Water molecules can be chemically bound to a salt so strongly that heat will not be effective in evaporating the water. True False
Water molecules can indeed be chemically bound to a salt in such a way that heat alone may not be sufficient to evaporate the water. The strength of the chemical bonds between water molecules and the salt ions can play a significant role in the evaporation process.
When water molecules are bound to a salt, such as in the case of hydrated salts, the chemical bonds between the water molecules and the salt ions can be quite strong. These bonds, known as hydration or solvation bonds, involve electrostatic attractions between the positive and negative charges of the ions and the partial charges on the water molecules.
The strength of these bonds can vary depending on factors such as the nature of the salt and the number of water molecules involved in the hydration. In some cases, the bonds can be so strong that additional energy beyond heat is required to break these bonds and evaporate the water.
This additional energy can come in the form of mechanical agitation, such as stirring or shaking, or the application of external forces, such as the use of desiccants or drying agents.
Therefore, the statement that heat alone is ineffective in evaporating water when it is chemically bound to a salt is true.
Learn more about hydration here:
brainly.com/question/919417
#SPJ11
The following data were obtained when a Ca2+ ISE was
immersed in standard solutions whose ionic strength was constant at
2.0 M.
Ca2+
(M)
E
(mV)
3.25 ✕ 10−5
−75.2
3.25 ✕ 10−4
�
To find [Ca2+] when E = -22.5 mV, we can use the Nernst equation and the given data points. By performing linear regression, we can determine the slope (beta) and the intercept (constant) of the E vs. log([Ca2+]) plot. Using these values, we can calculate [Ca2+] and find that it is approximately 1.67 × 10^-3 M. Additionally, the value of "ψ" in the equation for the response of the Ca2+ electrode is found to be approximately 0.712.
The given data represents the potential (E) obtained from the Ca2+ ion-selective electrode when immersed in standard solutions of varying Ca2+ concentrations. To find [Ca2+] when E = -22.5 mV, we can utilize the Nernst equation, which relates the potential to the concentration of the ion of interest.
By plotting the measured potentials against the logarithm of the corresponding Ca2+ concentrations, we can perform linear regression to determine the slope (beta) and the intercept (constant) of the resulting line. These values allow us to calculate [Ca2+] at a given potential.
In this case, using the provided data points, we can determine the slope (beta) to be 28.4 and the intercept (constant) to be 53.948. Substituting these values and the given potential (-22.5 mV) into the Nernst equation, we find that [Ca2+] is approximately 1.67 × 10^-3 M.
Regarding the value of "ψ" in the equation for the response of the Ca2+ electrode, we can evaluate the expression given as:
E = constant + beta(0.05016/2) log A_Ca2+(outside)(15-8)
By comparing the equation with the provided expression, we can determine that the value of "ψ" is equal to beta multiplied by 0.02508. With the calculated beta value of 28.4, we find that "ψ" is approximately 0.712.
Learn more about Nernst equation here:
https://brainly.com/question/31667562
#SPJ11
The complete question is :-
The following data were obtained when a Ca2+ ion-selective electrode was immersed standard solutions whose ionic strength was constant at 2.0 M.
Ca2+(M) E(mV)
3.38*10^-5 -74.8
3.38*10^-4 -46.4
3.38*10^-3 -18.7
3.38*10^-2 +10.0
3.38*10^-1 +37.7
Find [Ca2+] if E = -22.5 mV (in M) and calculate the value of � in the equation : response of CA2+ electrode:
E = constant + beta(0.05016/2) log A_Ca2+(outside)(15-8)
Consider a flat plate in parallel flow; the freestream velocity of the fluid (air) is 3.08 m/s. At what distance from the leading edge will the bounda layer go through transition from being laminar to turbulent? The properties of air at the "film temperature" are 1.18 kg/m3,1.81E−05 Pa s, 0.025 W/m/K with it Pr=0.707. Assume the critical Re to be 5E+05.
A flat plate in parallel flow with the freestream velocity of the fluid (air) is 3.08 m/s. The boundary layer on a flat plate will transition from laminar to turbulent flow at a distance of approximately 0.494 meters from the leading edge.
This transition point is determined by comparing the critical Reynolds number to the Reynolds number at the desired location.
Re is given by the formula:
Re = (ρ * U * x) / μ
Where:
ρ is the density of the fluid (air) = 1.18 kg/m³
U is the freestream velocity = 3.08 m/s
x is the distance from the leading edge (unknown)
μ is the dynamic viscosity of the fluid (air) = 1.81E-05 Pa s
To calculate the critical Reynolds number ([tex]Re_c_r_i_t_i_c_a_l[/tex]), we use the given critical Re value:
[tex]Re_c_r_i_t_i_c_a_l[/tex]= 5E+05
To determine the transition point, we need to solve for x in the following equation:
= (ρ * U * x) / μ
Rearranging the equation:
x = ([tex]Re_c_r_i_t_i_c_a_l[/tex]* μ) / (ρ * U)
Substituting the given values:
x = (5E+05 * 1.81E-05) / (1.18 * 3.08)
Calculating x:
x ≈ 0.494 meters
Therefore, the boundary layer will transition from laminar to turbulent flow at approximately 0.494 meters from the leading edge of the flat plate.
Learn more about critical Reynolds number here:
https://brainly.com/question/12977985
#SPJ11
A solution was prepared with 0.219 mol of pyridinium fluoride
(C5H5NHF) and enough water to make a 1.00 L. Pyridine (C5H5N) has a
Kb=1.70×10−9 and HFHF has a Ka=6.30×10−4.
Calculate the pH
The pH is 0.660.
To calculate the pH of the solution, we need to determine the concentration of hydronium ions ([H3O+]) in the solution.
First, we need to find the concentration of the pyridinium fluoride [tex](C5H5NHF)[/tex]that ionizes to form hydronium ions (H3O+) and fluoride ions (F-).
Initial moles of pyridinium fluoride [tex](C5H5NHF)[/tex] = 0.219 mol
Volume of the solution = 1.00 L
Since the solution is made up to 1.00 L, the concentration of pyridinium fluoride is:
C(C5H5NHF) = 0.219 mol / 1.00 L = 0.219 M
Next, we need to determine the equilibrium concentrations of hydronium ions ([H3O+]) and fluoride ions ([F-]) using the dissociation reaction of pyridinium fluoride:
C5H5NHF + H2O ⇌ C5H5NH+ + F-
From the dissociation reaction, we can see that for every 1 mole of pyridinium fluoride that dissociates, we get 1 mole of hydronium ions and 1 mole of fluoride ions.
Therefore, the equilibrium concentrations of [H3O+] and [F-] are both equal to the concentration of pyridinium fluoride:
[H3O+] = [F-] = 0.219 M
Since we have the concentration of hydronium ions, we can calculate the pH using the formula:
pH = -log[H3O+]
pH = -log(0.219) = 0.660
To know more about equilibrium refer to-
https://brainly.com/question/30694482
#SPJ11
Phosgene also reacts with carboxvlic acids. What are the products formed? Provide the mechanism for the transformation below.
When phosgene reacts with carboxylic acids, the products formed are acyl chlorides (also known as acid chlorides) and hydrogen chloride.
The reaction between phosgene (COCl₂) and carboxylic acids results in the formation of acyl chlorides. This reaction is known as the Vilsmeier-Haack reaction. The mechanism involves the following steps:
1. Activation: Phosgene is activated by reacting with a base, such as pyridine (C₅H₅N), to form a chloroformate intermediate. This step generates a nucleophilic carbon center in phosgene.
2. Nucleophilic attack: The activated phosgene reacts with the carboxylic acid, where the nucleophilic carbon attacks the carbonyl carbon of the carboxylic acid. This results in the formation of an intermediate called a mixed anhydride.
3. Rearrangement: The mixed anhydride undergoes a rearrangement where the oxygen from the carboxylic acid attacks the carbonyl carbon, resulting in the expulsion of carbon dioxide (CO₂).
4. Chloride ion transfer: Finally, a chloride ion from the activated phosgene attacks the carbonyl carbon of the mixed anhydride, leading to the formation of the acyl chloride product and the regeneration of the base catalyst.
Overall, the reaction between phosgene and carboxylic acids leads to the conversion of the carboxylic acid functional group into an acyl chloride, accompanied by the liberation of hydrogen chloride (HCl).
Learn more about nucleophilic attack here:
https://brainly.com/question/32320781
#SPJ11
1. Which oil - olive oil or coconut oil - would you expect to
have a higher peroxide value after opening and storage under normal
conditions as you prepare your certificate of analysis? Explain
your a
Based on their composition, olive oil would be expected to have a higher peroxide value after opening and storage under normal conditions compared to coconut oil.
The peroxide value is a measure of the primary oxidation products in oils and fats, indicating their susceptibility to oxidation. Olive oil, being rich in unsaturated fatty acids, particularly monounsaturated fatty acids like oleic acid, is more prone to oxidation compared to coconut oil, which primarily consists of saturated fatty acids.
Unsaturated fatty acids are more susceptible to oxidation due to the presence of double bonds in their chemical structure. When exposed to air, heat, and light, unsaturated fatty acids can react with oxygen, leading to the formation of peroxides. These peroxides contribute to the peroxide value.
Coconut oil, on the other hand, has a high content of saturated fatty acids, which are more stable and less prone to oxidation. The absence of double bonds in saturated fatty acids reduces their reactivity with oxygen, resulting in a lower peroxide value compared to oils with higher unsaturated fatty acid content.
Learn more about fatty acids here:
https://brainly.com/question/31037029
#SPJ11
Fragrant esters are associated with plants. How do plants use aromas? Fragrant esters must be volatile, by definition. What is it about esters that makes them volatile.
Plants utilize aromas for various purposes, and fragrant esters are associated with these aromatic compounds. The volatility of esters contributes to their ability to release pleasant scents.
Plants produce fragrant compounds, including esters, to attract pollinators, repel herbivores, and communicate with other organisms. Aromas play a crucial role in attracting pollinators like bees, butterflies, and birds, aiding in the process of pollination and ensuring the plant's reproductive success.
Additionally, some plant aromas act as defensive mechanisms by deterring herbivores and protecting the plant from damage. The release of pleasant scents can also be a way for plants to communicate with other organisms, such as attracting predators of herbivores or signaling the presence of ripe fruits.
Esters, specifically, are volatile compounds due to their chemical structure. Esters are formed by the reaction between an alcohol and an organic acid, resulting in the formation of a distinctive odor. The volatility of esters is attributed to their relatively low boiling points and high vapor pressures.
These properties allow esters to easily evaporate from plant tissues and disperse in the surrounding air, enhancing their ability to emit fragrance. The volatility of esters enables plants to release their aromatic compounds into the atmosphere, maximizing the chances of attracting pollinators and other beneficial organisms over greater distances.
Learn more about esters here :
https://brainly.com/question/32098100
#SPJ11
Question 9 (1 point) What is the boiling point of a solution of 10.0 g NaCl (58.44 g/mol) in 83.0 g H₂O? Kb(H₂O) = 0.512 °C/m OA) 101°C B) 108°C C) 98°C D) 100°C E) 90°C
The boiling point of the solution is approximately 101°C (option A).
To calculate the boiling point elevation, we can use the formula:
ΔTb = Kb * m
where ΔTb is the boiling point elevation, Kb is the molal boiling point elevation constant for the solvent (0.512 °C/m for water), and m is the molality of the solution in mol solute/kg solvent.
First, we need to calculate the molality of the solution.
Molality (m) = moles of solute / mass of solvent (in kg)
The number of moles of NaCl can be calculated using the formula:
moles of solute = mass of NaCl / molar mass of NaCl
mass of NaCl = 10.0 g
molar mass of NaCl = 58.44 g/mol
moles of solute = 10.0 g / 58.44 g/mol ≈ 0.171 mol
Next, we need to calculate the mass of water in kg.
mass of H₂O = 83.0 g / 1000 = 0.083 kg
Now we can calculate the molality:
m = 0.171 mol / 0.083 kg ≈ 2.06 mol/kg
Finally, we can calculate the boiling point elevation:
ΔTb = 0.512 °C/m × 2.06 mol/kg ≈ 1.055 °C
The boiling point of the solution will be higher than the boiling point of pure water. To find the boiling point of the solution, we need to add the boiling point elevation to the boiling point of pure water.
Boiling point of solution = Boiling point of pure water + ΔTb
Boiling point of pure water is 100 °C (at standard atmospheric pressure).
Boiling point of solution = 100 °C + 1.055 °C ≈ 101.055 °C
Therefore, the boiling point of the solution is approximately 101°C (option A).
Learn more about boiling point from the link given below.
https://brainly.com/question/2153588
#SPJ4
iv) Consider a simple ideal Rankine cycle with fixed boiler and condenser pressures. If the cycle is modified with superheating and reheating, then (a) the amount of heat rejected will decrease. (b) the cycle thermal efficiency will increase. (c) the quality of steam at turbine exit will decrease. (d) the turbine work output will decrease.
The correct answer is option (c) the quantity of steam at turbine exit will decrease due to the reheating process.
The average temperature at which heat is added to the steam can be increased without increasing the boiler pressure by superheating the steam to high temperatures.
Superheating and reheating the steam to high temperatures results in decrease in the quantity of steam at turbine exit.
It also increase the network output and the efficiency of the rankine cycle.
Learn more about superheating https://brainly.in/question/12825401
#SPJ11
In an aqueous solution of a certain acid with pK = 6.59 the pH is 4.06. Calculate the percent of the acid that is dissociated in this solution. Round your answer to 2 significant digits. % x10 X Ś ?
The p Ka is defined as the negative base 10 logarithm of the acid dissociation constant.
The formula for the percentage of the acid that is dissociated in a solution is:% dissociation = 10^(pKa - pH) * 100Given p K = 6.59 and pH = 4.06% dissociation = 10^(6.59 - 4.06) * 100 = 0.91% (rounded to two significant digits).
Therefore, the percent of the acid that is dissociated in this solution is 0.91%.
To know more about defined visit:
https://brainly.com/question/21598857
#SPJ11
1. In a chemical reaction propane gas C4H10 burns in oxygen gas to give carbon and liquid water. Write the balanced chemical equation for the reaction, including state symbols. [2 marks] Kore CO₂ +5
The balanced chemical equation for the combustion of propane (C4H10) in oxygen gas can be written as:
[tex]C_4H_1_0[/tex](g) + 13/2[tex]O_2[/tex](g) → 4 [tex]CO_2[/tex](g) + 5 [tex]H_2O[/tex](l)
In this reaction, propane gas reacts with oxygen gas to produce carbon dioxide gas and liquid water. The numbers in front of the chemical formulas, called coefficients, indicate the relative number of moles of each substance involved in the reaction.
The coefficient of 4 in front of [tex]CO_2[/tex] indicates that 4 moles of carbon dioxide are produced for every mole of propane that reacts. Similarly, the coefficient of 5 in front of [tex]H_2O[/tex] indicates that 5 moles of water are produced for every mole of propane.
The state symbols (g) and (l) represent the physical states of the substances involved in the reaction. (g) stands for gaseous and (l) stands for liquid. Therefore, in the balanced equation, propane and oxygen are in the gaseous state, while carbon dioxide is also in the gaseous state, and water is in the liquid state.
Learn more about combustion here:
brainly.com/question/31123826
#SPJ11
What are the primary chemical components for a sports
drink?
Group of answer choices
Water, sugar and caffeine
Water, electrolytes and caffeine
Water, sugar and electrolytes
Electrolytes and wat
The primary chemical components for a sports drink are water, sugar and electrolytes.
A sports drink is a beverage that is designed for people who are participating in physical activities like sports, running, exercising, etc. Sports drinks contain carbohydrates, electrolytes, and water, which help to replenish the fluids and nutrients that are lost during physical activity.
Electrolytes are minerals like sodium, potassium, and calcium, that are essential for regulating fluid balance in the body. Electrolytes help to maintain proper hydration levels, prevent muscle cramps, and support nerve and muscle function. They are lost when the body sweats, and need to be replaced by consuming electrolyte-rich foods or beverages.
Sugar is a type of carbohydrate that is used by the body as a source of energy. It is found in many foods and drinks, and comes in different forms like glucose, fructose, and sucrose. Sugar provides quick energy, but it can also lead to a crash in energy levels if consumed in excess. It is important to balance sugar intake with other nutrients and to choose sources of sugar that are less processed and more nutrient-dense.
Learn more about Electrolyte:
https://brainly.com/question/17089766
#SPJ11
Atom Transfer Radical Polymerization (ATRP) is a versatile and robust free radical polymerization process employed for the preparation of polymers with controlled number average molecular weights, narrow molecular weight distributions and regiospecific introduction of the functional groups. (a) Briefly discuss the key features of the Atom Transfer Radical Polymerization method. (b) (c) (d) (e) Formulate a detailed mechanism for the Atom Transfer Radical Polymerization process. Using the ATRP method, briefly outline reaction pathways for the preparation of the following polymers. (1) poly(p-bromostyrene) poly(2-hydroxyethyl methacrylate) (iii) a-carboxyl functionalized polystyrene (iv) w-amine functionalized poly(methyl methacrylate) What is a thermoresponsive polymer? Outline a reaction pathway for the preparation of poly(N-isopropylacrylamide) by ATRP methods. 31 What is macromer or macromonomer? Briefly outline the reaction pathway for the preparation of poly(styrene-g-poly(methyl methacrylate) by ATRP methods. (35)
a. Key features of Atom Transfer Radical Polymerization (ATRP):
ATRP is a controlled radical polymerization technique that allows for the preparation of polymers with controlled molecular weights and narrow molecular weight distributions.
It involves the reversible deactivation of growing radicals through a dynamic equilibrium between dormant and active species.
ATRP requires the presence of a transition metal catalyst, typically copper complexes, and a suitable initiator.
b. Mechanism of Atom Transfer Radical Polymerization (ATRP):
ATRP involves an initiation step where an initiator reacts with the catalyst to generate an active species.
This active species can react with a monomer to form a growing polymer chain.
The polymerization proceeds through a repeated chain extension and termination step, with the deactivation and reactivation of the growing radicals, maintaining control over the polymerization process.
c. Preparation of poly(p-bromostyrene) via ATRP:
The polymerization of p-bromostyrene can be achieved by using a bromine-functionalized initiator and a suitable catalyst system in the presence of a solvent.
d. Preparation of poly(2-hydroxyethyl methacrylate) via ATRP:
The polymerization of 2-hydroxyethyl methacrylate can be carried out by using an appropriate initiator and ATRP catalyst system in a suitable solvent.
e. Thermoresponsive polymers:
Thermoresponsive polymers are those that exhibit a reversible phase transition or change in properties in response to temperature variations.
A popular thermoresponsive polymer is poly(N-isopropylacrylamide) (PNIPAM), which exhibits a lower critical solution temperature (LCST) around 32°C.
Learn more about ATRP here:
https://brainly.com/question/33222682
#SJP11