ertically polarized light of intensity l, is incident on a polarizer whose transmission axis is at an angle of 70° with the vertical. If the intensity of the transmitted light is measured to be 0.34W/m2, the intensity lo of the incident light is O 0.99 W/m2 O 0.43 W/m2 O 1.71 W/m2 O 2.91 W/m2

The acceleration of the elevator is approximately 14.12 m/s².

The mass of an elevator cabin and people inside the cabin is 363.7 + 177.0 = 540.7 kg.

The tension force is 7638 N.

Newton's second law states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration.

Fnet = ma

Where:

Fnet = net force acting on the object

m = mass of the object

a = acceleration of the object

Rearranging this equation gives us:

a = Fnet / m

Substituting the given values gives us:

a = 7638 N / 540.7 kg

a ≈ 14.12 m/s²

Therefore, the acceleration of the elevator is approximately 14.12 m/s².

Learn more about the acceleration:

brainly.com/question/25876659

#SPJ11

For the Doppler frequency heard by Albert, we need to calculate the apparent frequency due to the relative motion between Albert and Bob. Using the formula for the Doppler effect, we can determine the change in frequency.

To find the intensity in decibels, we can use the formula for decibel scale, which relates the intensity of sound to the threshold of hearing. By taking the logarithm of the ratio of the given intensity to the threshold of hearing, we can convert the intensity to decibels.

The power of the source can be determined using the formula for power, which relates power to intensity. By multiplying the given intensity at a distance of 4.00 m by the surface area of a sphere with a radius of 4.00 m, we can calculate the power of the source in watts.

1. The Doppler effect describes the change in frequency perceived by a moving observer due to the relative motion between the observer and the source of the sound. In this case, Bob is moving towards Albert, causing a change in frequency. We can use the formula for the Doppler effect to calculate the apparent frequency heard by Albert.

2. The intensity of sound can be measured in decibels, which is a logarithmic scale that relates the intensity of sound to the threshold of hearing. By taking the logarithm of the ratio of the given intensity to the threshold of hearing, we can determine the intensity in decibels.

3. The intensity of sound decreases as the square of the distance from the source due to spreading over a larger area. Using the inverse square law, we can calculate the intensity at a distance of 10.0 m from the source by dividing the given intensity at a distance of 4.00 m by the square of the ratio of the distances.

4. The power of the source can be determined by multiplying the intensity at a distance of 4.00 m by the surface area of a sphere with a radius of 4.00 m. This calculation gives us the power of the source in watts.

To learn more about Doppler click here: brainly.com/question/32883194

#SPJ11

The reactance is approximately 13.7 kΩ.

An inductor designed to filter high-frequency noise from power supplied to a personal computer placed in series with the computer.

The formula that is used to calculate the inductance value is given by;

X = 2πfL

We are given that the reactance that the inductor should produce is 2.83 Ω for a frequency of 150 kHz.

Therefore substituting in the formula we get;

X = 2πfL

L = X/2πf

  = 2.83/6.28 x 150 x 1000

Hence L = 2.83/(6.28 x 150 x 1000)

              = 3.78 x 10^-6 H

The reactance is given by the formula;

X = 2πfL

Substituting the given values in the formula;

X = 2 x 3.142 x 57.07734 x 10^6 x 3.78 x 10^-6

   = 13.67 Ω

   ≈ 13.7 kΩ

Learn more about reactance from the given link

https://brainly.in/question/2056610

#SPJ11

By applying momentum and energy conservation, the initial velocity of the bullet is (m * V + M * V') / m. The erroneous equation neglects the rebound of the bullet and the velocity imparted to the wood.

a) To determine the initial velocity (v) of the bullet, we can apply the principles of momentum and energy conservation.

According to the law of conservation of momentum, the total momentum before the collision is equal to the total momentum after the collision. The momentum of an object is given by the product of its mass and velocity.

Before the collision:

The momentum of the bullet: m * v (since the mass of the bullet is m)

The momentum of the wood: 0 (since it is initially at rest)

After the collision:

The momentum of the bullet: m * (-V) (since it moves in the opposite direction with velocity -V)

The momentum of the wood: M * (-V') (since it moves in the opposite direction with velocity -V')

Using the conservation of momentum, we can equate the total momentum before and after the collision:

m * v + 0 = m * (-V) + M * (-V')

Simplifying the equation:

v = (m * V + M * V') / m

Now, let's apply the principle of conservation of energy. The initial kinetic energy of the system is converted into potential energy when the system swings upward by a height (h).

The initial kinetic energy of the system is given by:

(1/2) * (m + M) * V^2

The potential energy gained by the system is given by:

(m + M) * g * h

According to the conservation of energy, these two energies are equal:

(1/2) * (m + M) * V^2 = (m + M) * g * h

Now we can substitute the given values:

m = 10 g = 0.01 kg

M = 10 kg

h = 5 cm = 0.05 m

g = 10 m/s^2

Substituting the values into the equation, we can solve for V:

(1/2) * (0.01 + 10) * V^2 = (0.01 + 10) * 10 * 0.05

Simplifying the equation:

0.505 * V^2 = 5.05

V^2 = 10

Taking the square root of both sides:

V = √10

Therefore, the initial velocity of the bullet (v) is given by:

v = (m * V + M * V') / m

b) The equation (M+m)gh = (1/2)mv^2 is erroneous because it assumes that the bullet remains embedded in the wood after the collision and does not take into account the velocity (V') of the wood. In reality, the bullet rebounds from the wood and imparts a velocity (V') to the wood in the opposite direction. Therefore, the correct equation must consider both the velocities of the bullet and the wood to account for the conservation of momentum and energy in the system.

To know more about momentum, click here:

brainly.com/question/30677308

#SPJ11

Convex lenses are used for applications that require converging light rays to create magnified and real images, while concave lenses are used for applications that require diverging light rays to control light intensity or provide a wider field of view.

Convex lens:

Peephole in a door: A convex lens is used as a peephole in a door to provide a wider field of view. The convex shape of the lens helps in magnifying the image and bringing it closer to the viewer's eye, making it easier to see who is at the door.

Objective lens (front lens) of binoculars: Binoculars use a pair of convex lenses as the objective lens, which gathers light from a distant object and forms a real and inverted image. The convex lens converges the incoming light rays, allowing the viewer to observe the magnified image of the object.

Magnifying glass: A magnifying glass consists of a convex lens that is used to magnify small objects or text. The curved shape of the lens converges the light rays, producing a larger virtual image that appears magnified to the viewer.

Concave lens:

Photodiode: A concave lens can be used in a photodiode setup where it senses the light (or the lack of it) from an LED light source positioned some distance away. A concave lens diverges the incoming light rays, spreading them out and reducing their intensity. This property of a concave lens can be used to control the amount of light falling on the photodiode, enabling it to detect changes in light intensity.

Viewfinder of a simple camera: A concave lens can be used in the viewfinder of a camera to help the photographer compose the image. The concave lens diverges the light rays from the scene, allowing the photographer to see a wider field of view. This helps in framing the shot and ensuring that the desired elements are captured within the frame.

In summary, convex lenses are used for applications that require converging light rays to create magnified and real images, while concave lenses are used for applications that require diverging light rays to control light intensity or provide a wider field of view.

(Convex lens or concave lens? Along with the reason. Part B Below is a list of some applications of lenses. Determine which lens could be used in each and explain why it would work. You can conduct online research to help you in this activity, if you wish. B 1 z X X2 10pt - v. E v Applications Lens Used Reason peephole in a door objective lens (front lens) of binoculars photodiode-In a garage door or burglar alarm, it can sense the light (or the lack of it) from an LED light source positioned some distance away. magnifying glass viewfinder of a simple camera Characters used:300/15000)

learn more about light

https://brainly.com/question/2790279

#SPJ11

The arrow will take approximately 1.4 seconds to hit the ground. This can be determined by analyzing the vertical motion of the arrow and considering the effects of gravity.

When the arrow is shot horizontally, its initial vertical velocity is zero since it is only moving horizontally. The only force acting on the arrow in the vertical direction is gravity, which causes it to accelerate downwards at a rate of 9.8 m/s².

Using the equation of motion for vertical motion, h = ut + (1/2)gt², where h is the vertical displacement (6.2 m), u is the initial vertical velocity (0 m/s), g is the acceleration due to gravity (-9.8 m/s²), and t is the time taken, we can rearrange the equation to solve for t.

Rearranging the equation gives us t² = (2h/g), which simplifies to t = √(2h/g). Substituting the given values, we have t = √(2 * 6.2 / 9.8) ≈ 1.4 seconds.

Therefore, the arrow will take approximately 1.4 seconds to hit the ground when shot horizontally from a height of 6.2 meters above the ground, ignoring friction.

To learn more about Motion click here:

brainly.com/question/33317467

#SPJ11

The energy stored in the capacitor is approximately 0.81 Joules. To calculate the energy stored in a capacitor, we can use the formula:

E = (1/2) * C * V^2

Where:

E is the energy stored in the capacitor,

C is the capacitance of the capacitor, and

V is the voltage across the capacitor.

C = (ε₀ * A) / d

Step 1: Calculate the area of one plate.

The diameter of each plate is 6.0 cm, so the radius (r) is half of that:

r = 6.0 cm / 2 = 3.0 cm = 0.03 m

A = π * r^2

A = π * (0.03 m)^2

Step 2: Calculate the capacitance.

C = (8.85 x 10^-12 F/m) * A / d

Step 3: Calculate the energy stored in the capacitor.

Using the formula for energy stored in a capacitor:

E = (1/2) * C * V^2

A = π * (0.03 m)^2

A = 0.0028274 m^2

C = (8.85 x 10^-12 F/m) * 0.0028274 m^2 / 0.001 m

C ≈ 2.8 x 10^-11 F

V = 170 V

E = (1/2) * (2.8 x 10^-11 F) * (170 V)^2

E ≈ 0.81 J

So, the energy stored in the capacitor is approximately 0.81 Joules.

Learn more about capacitor here : brainly.com/question/31627158

#SPJ11

a) The average deceleration required to bring the train to a stop over a distance of 40m is approximately -5 m/s^2. The force required is approximately -20,000 N (opposite to the initial direction of motion).

b) The magnitude of the initial induced current is approximately 10 A, flowing in the direction opposite to the initial motion of the subway car.

c) The magnetic field should be directed opposite to the initial direction of motion of the subway car to produce a decelerating force.

a) To find the average deceleration and force required, we can use the equations of motion. The initial speed of the subway car is 20 m/s, and it comes to a stop over a distance of 40 m.

Using the equation:

Final velocity^2 = Initial velocity^2 + 2 × acceleration × distance

Substituting the values:

0^2 = (20 m/s)^2 + 2 × acceleration × 40 m

Simplifying the equation:

400 m^2/s^2 = 800 × acceleration × 40 m

Solving for acceleration:

acceleration ≈ -5 m/s^2 (negative sign indicates deceleration)

To find the force required, we can use Newton's second law:

Force = mass × acceleration

Substituting the values:

Force = 4000 kg × (-5 m/s^2)

Force ≈ -20,000 N (negative sign indicates the force opposite to the initial direction of motion)

b) According to Faraday's law of electromagnetic induction, a changing magnetic field induces an electromotive force (EMF) and, consequently, a current in a closed circuit. In this case, as the subway car moves along the rails, the magnetic field perpendicular to the rails induces a current.

The magnitude of the induced current can be calculated using Ohm's law:

Current = Voltage / Resistance

The induced voltage can be found using Faraday's law:

Voltage = -N × ΔΦ/Δt

Since the rails are frictionless, the only force acting on the subway car is the magnetic force, which opposes the motion. The induced voltage is therefore equal to the magnetic force multiplied by the length of the bar.

Voltage = Force × Length

Substituting the given values:

Voltage = 20,000 N × 3 m

Voltage = 60,000 V

Using Ohm's law:

Current = Voltage / Resistance

Current = 60,000 V / 1000 Ω

Current ≈ 60 A

The magnitude of the initial induced current is approximately 60 A, flowing in the direction opposite to the initial motion of the subway car.

c) To produce a decelerating force on the subway car, the direction of the magnetic field should be opposite to the initial direction of motion. This is because the induced current generates a magnetic field that interacts with the external magnetic field, resulting in a force that opposes the motion of the subway car. The direction of the magnetic field should be such that it opposes the motion of the subway car.

To bring the subway car to a stop over a distance of 40 m, an average deceleration of approximately -5 m/s^2 is required, with a force of approximately -20,000 N (opposite to the initial direction of motion). The magnitude of the initial induced current is approximately 60 A, flowing in the opposite direction to the initial motion of the subway car. To produce a decelerating force, the direction of the magnetic field should be opposite to the initial direction of motion.

To know more about deceleration visit,

https://brainly.com/question/75351

# SPJ11

The wavelength of an electron with a kinetic energy of 2.4 eV can be calculated using the de Broglie wavelength equation. The wavelength, expressed in nanometers (nm) to two decimal places, can be determined numerically.

The de Broglie wavelength equation relates the wavelength (λ) of a particle to its momentum (p). For an electron, the equation is given by:

λ = h / p

Where:

λ is the wavelength,

h is the Planck's constant (approximately 6.626 x 10^-34 J·s), and

p is the momentum.

The momentum of an electron can be calculated using its kinetic energy (KE) and mass (m) through the equation:

p = sqrt(2 * m * KE)

To find the wavelength, we first need to convert the kinetic energy from electron volts (eV) to joules (J) using the conversion factor: 1 eV = 1.602 x 10^-19 J. Then, we can calculate the momentum and substitute it into the de Broglie wavelength equation.

By plugging in the appropriate values and performing the calculations, we can find the wavelength of the electron in nanometers to two decimal places.

To learn more about electron click here brainly.com/question/12001116

#SPJ11

The magnitude of the sum of the

momenta

can be found using the vector addition of the individual momenta.

The direction of the sum of the momenta can be described as an angle with respect to due east.

(a) To find the

magnitude

of the sum of the momenta, we need to add the individual momenta vectorially.

Momentum of the first jogger (J1):

Magnitude = Mass ×

Velocity

= 76 kg × 3.2 m/s = 243.2 kg·m/s

Momentum of the second jogger (J2):

Magnitude =

Mass

× Velocity = 67 kg × 2.7 m/s = 180.9 kg·m/s

Sum of the momenta (J1 + J2):

Magnitude = 243.2 kg·m/s + 180.9 kg·m/s = 424.1 kg·m/s

Therefore, the magnitude of the sum of the momenta is 424.1 kg·m/s.

(b) To find the direction of the sum of the momenta, we can use

trigonometry

to determine the angle with respect to due east.

Given that the second jogger is heading 56° north of east, we can subtract this angle from 90° to find the direction angle with respect to due east.

Direction angle = 90° - 56° = 34°

Therefore, the direction of the sum of the momenta is 34° with respect to due east.

To learn more about

momenta

click here.

brainly.com/question/32847939

#SPJ11

Half-life:The half-life of a radioactive substance is defined as the time taken for half of the initial number of radioactive nuclei to decay. In terms of the decay constant, λ, the half-life, t1/2, is given by [tex]t1/2=0.693/λ.[/tex]

The value of t1/2 is specific to each radioactive nuclide and depends on the particular nuclear decay mode.Activity:

Activity, A, is the rate of decay of a radioactive source and is given by [tex]A=λN.[/tex]

The SI unit of activity is the becquerel, Bq, where 1 [tex]Bq = 1 s-1.[/tex]

An older unit of activity is the curie, Ci, where 1 [tex]Ci = 3.7 × 1010 Bq.[/tex]

The activity of a radioactive source decreases as the number of radioactive nuclei decreases.The decay law is given by [tex]N = N0e-λt[/tex]

Where N is the number of radioactive nuclei at time t, N0 is the initial number of radioactive nuclei, λ is the decay constant and t is the time since the start of the measurement.

The half-life of a radioactive substance is defined as the time taken for half of the initial number of radioactive nuclei to decay.

In terms of the decay constant, λ, the half-life, t1/2, is given by[tex]t1/2=0.693/λ.[/tex]

The activity of a radioactive source is the rate of decay of a radioactive source and is given by [tex]A=λN.[/tex]

To know more about radioactive visit:

https://brainly.com/question/1770619

#SPJ11

The resistances of the two resistors used are 200 ohms and 112 ohms.

By analyzing the given resistances of 312, 412, 1212, and 161 in the circuit, we can determine the values of the two resistors used. Let's denote the resistors as R1 and R2. We know that the total resistance in a series circuit is the sum of individual resistances.

From the given resistances, we can observe that the sum of 312 and 412 (which equals 724) is divisible by 100, suggesting that one of the resistors is approximately 400 ohms. Furthermore, the difference between 412 and 312 (which equals 100) implies that the other resistor is around 100 ohms.

Now, let's verify these assumptions. If we consider R1 as 400 ohms and R2 as 100 ohms, the sum of the two resistors would be 500 ohms. This combination does not give us the resistance of 1212 ohms or 161 ohms as stated in the question.

Let's try another combination: R1 as 200 ohms and R2 as 112 ohms. In this case, the sum of the two resistors is indeed 312 ohms. Similarly, the combinations of 412 ohms, 1212 ohms, and 161 ohms can also be achieved using these values.

Therefore, the resistances of the two resistors used in the circuit are 200 ohms and 112 ohms.

Learn more about Resistances

brainly.com/question/29427458

#SPJ11.

To solve this problem using the principle of conservation of momentum. So, the velocity of the second skater is approximately 0.609 m/s in the opposite direction (north).

Given:

Mass of the first skater (m1) = 47.0 kg

Velocity of the first skater (v1) = 0.645 m/s south

Mass of the second skater (m2) = 50 kg

Velocity of the second skater (v2) = ?

According to the principle of conservation of momentum, the total momentum before the interaction is equal to the total momentum after the interaction.

Initial momentum = Final momentum

The initial momentum of the system can be calculated by multiplying the mass of each skater by their respective velocities:

Initial momentum = (m1 * v1) + (m2 * v2)

The final momentum of the system can be calculated by considering that after pushing off against each other, the two skaters move in opposite directions with their respective velocities:

Final momentum = (m1 * (-v1)) + (m2 * v2)

Setting the initial momentum equal to the final momentum, we have:

(m1 * v1) + (m2 * v2) = (m1 * (-v1)) + (m2 * v2)

Rearranging the equation and solving for v2:

2 * (m2 * v2) = m1 * v1 - m1 * (-v1)

2 * (m2 * v2) = m1 * v1 + m1 * v1

2 * (m2 * v2) = 2 * m1 * v1

m2 * v2 = m1 * v1

v2 = (m1 * v1) / m2

Substituting the given values, we can calculate the velocity of the second skater:

v2 = (47.0 kg * 0.645 m/s) / 50 kg

v2 ≈ 0.609 m/s

Therefore, the velocity of the second skater is approximately 0.609 m/s in the opposite direction (north).

To learn more about, momentum, click here, https://brainly.com/question/30677308

#SPJ11

Resultant intensity of the transmitted light through the polarizer, we need to consider the angle between the incident plane-polarized light and the axis of the polarizer. The transmitted intensity can be calculated using Malus' law.

Malus' law states that the transmitted intensity (I_t) through a polarizer is given by:

I_t = I_i * cos²θ, where I_i is the incident intensity and θ is the angle between the incident plane-polarized light and the polarizer's axis.

Substituting the given values:

I_i = 1,200 watts/m² (incident intensity)

θ = 30° (angle between the incident light and the polarizer's axis)

Calculating the transmitted intensity:

I_t = 1,200 watts/m² * cos²(30°)

I_t ≈ 1,200 watts/m² * (cos(30°))^2

I_t ≈ 1,200 watts/m² * (0.866)^2

I_t ≈ 1,200 watts/m² * 0.75

I_t ≈ 900 watts/m²

Therefore, the resultant intensity of the transmitted light through the polarizer is approximately 900 watts/m².

To learn more about polarizer click here.

brainly.com/question/29217577

#SPJ11

The half-life of the radioisotope is 30 minutes. The half-life of a radioisotope is the time it takes for half of the nuclei in a sample to decay.

In this case, we start with 400 nuclei and after one hour, only 25 nuclei remain. This means that 375 nuclei have decayed in one hour. Since the half-life is the time it takes for half of the nuclei to decay, we can calculate it by dividing the total time (one hour or 60 minutes) by the number of times the half-life fits into the total time.

In this case, if 375 nuclei have decayed in one hour, that represents half of the initial sample size (400/2 = 200 nuclei). Therefore, the half-life is 60 minutes divided by the number of times the half-life fits into the total time, which is 60 minutes divided by the number of half-lives that have occurred (375/200 = 1.875).

Therefore, the half-life of the isotope is approximately 30 minutes.

Learn more about half life click here:

brainly.com/question/31666695

#SPJ11

The magnitude of the electrostatic force on a third charge placed at a specific location can be calculated using Coulomb's law.

In this case, a charge of +54 µC is located at x = 0, a charge of -38 µC is located at x = 50 cm, and a third charge of 4.0 µC is located at x = 15 cm on the x-axis. By applying Coulomb's law, the magnitude of the electrostatic force can be determined.

Coulomb's law states that the magnitude of the electrostatic force between two charges is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as F = k * |q1 * q2| / r^2, where F is the electrostatic force, q1, and q2 are the charges, r is the distance between the charges, and k is the electrostatic constant.

In this case, we have a charge of +54 µC at x = 0 and a charge of -38 µC at x = 50 cm. The third charge of 4.0 µC is located at x = 15 cm. To calculate the magnitude of the electrostatic force on the third charge, we need to determine the distance between the third charge and each of the other charges.

The distance between the third charge and the +54 µC charge is 15 cm (since they are both on the x-axis at the respective positions). Similarly, the distance between the third charge and the -38 µC charge is 35 cm (50 cm - 15 cm). Now, we can apply Coulomb's law to calculate the electrostatic force between the third charge and each of the other charges.

Using the equation F = k * |q1 * q2| / r^2, where k is the electrostatic constant (approximately 9 x 10^9 Nm^2/C^2), q1 is the charge of the third charge (4.0 µC), q2 is the charge of the other charge, and r is the distance between the charges, we can calculate the magnitude of the electrostatic force on the third charge.

Substituting the values, we have F1 = (9 x 10^9 Nm^2/C^2) * |(4.0 µC) * (54 µC)| / (0.15 m)^2, where F1 represents the force between the third charge and the +54 µC charge. Similarly, we have F2 = (9 x 10^9 Nm^2/C^2) * |(4.0 µC) * (-38 µC)| / (0.35 m)^2, where F2 represents the force between the third charge and the -38 µC charge.

Finally, we can calculate the magnitude of the electrostatic force on the third charge by summing up the forces from each charge: F_total = F1 + F2.

Performing the calculations will provide the numerical value of the magnitude of the electrostatic force on the third charge in whole numbers.

To learn more about electrostatic force click here: brainly.com/question/31042490?

#SPJ11

We can use the principle of work and energy conservation. The work done by the average force on the bullet is equal to the change in kinetic energy of the bullet.

Additionally, the work done by the average force on the target is equal to the change in kinetic energy of the target.

(A) Average force on the bullet:

The work done on the bullet is equal to the change in its kinetic energy. We can calculate the initial kinetic energy of the bullet using the formula:

KE_bullet = (1/2) * m_bullet * v_bullet²

where m_bullet is the mass of the bullet and v_bullet is its initial velocity.

Plugging in the values:

m_bullet = 7.80 g = 0.00780 kg

v_bullet = 20 m/s

KE_bullet = (1/2) * 0.00780 kg * (20 m/s)² = 1.56 J

Since the bullet stops, its final kinetic energy is zero. Therefore, the work done by the average force on the bullet is equal to the initial kinetic energy:

Work_bullet = KE_bullet = 1.56 J

The displacement of the bullet is not given, but it's not needed to calculate the average force.

(B) Time elapsed until the bullet stops:

The work done by the average force on the target is equal to the change in kinetic energy of the target. Since the target comes to a stop, its final kinetic energy is zero. We can calculate the initial kinetic energy of the target using the formula:

KE_target = (1/2) * m_target * v_target²

where m_target is the mass of the target and v_target is its initial velocity.

The mass of the target is not given, so we cannot determine the exact value for the force or the time elapsed.

To know more about work done visit:

https://brainly.com/question/25573309

#SPJ11

The magnitude of the deflection on the screen caused by the Earth's gravitational field can be calculated as below: F_gravity = m * g, where m = mass of electron, g = acceleration due to gravity = 9.8 m/s².

F_gravity = 9.1 x 10⁻³¹ kg * 9.8 m/s² = 8.91 x 10⁻³⁰ N Force on the electron will be F = q * E, where q = charge on electron = 1.6 x 10⁻¹⁹ C, E = electric field = V / d, where V = accelerating voltage = 2.45 x 10³ V, d = distance from the electron gun to the screen = 36.6 cm = 0.366 m.

E = V / d = 2.45 x 10³ V / 0.366 m = 6.68 x 10³ V/mF = q * E = 1.6 x 10⁻¹⁹ C * 6.68 x 10³ V/m = 1.07 x 10⁻¹⁵ N Force on the electron due to the Earth's gravitational field = F_gravity = 8.91 x 10⁻³⁰ NNet force on the electron = F_net = √(F_gravity² + F²)F_net = √(8.91 x 10⁻³⁰ N)² + (1.07 x 10⁻¹⁵ N)² = 1.07 x 10⁻¹⁵ NAngle of deflection = tan⁻¹(F_gravity / F) = tan⁻¹(8.91 x 10⁻³⁰ / 1.07 x 10⁻¹⁵) = 0.465°Magnitude of deflection = F_net * d / (q * V) = 1.07 x 10⁻¹⁵ N * 0.366 m / (1.6 x 10⁻¹⁹ C * 2.45 x 10³ V) = 1.47 x 10⁻³ mm(b) The direction of the deflection on the screen caused by the Earth's gravitational field is down.

To know more about magnitude visit:

https://brainly.com/question/28714281

#SPJ11

The value of the mass in kg of steam entering the cylinder is 0.0407 kg.

The mass in kg of steam entering the cylinder is 0.0407 kg.

Let m be the mass of the steam entering the cylinder. The specific volume of steam at 5 bar and 300°C is given as follows:v = 0.0642 m^3/kg

Using the formula of internal energy, we can find that:u = 2966 kJ/kg

The initial internal energy of the steam in the cylinder is given as follows:

u1 = hf + x1 hfg

u1 = 1430.8 + 0.9886 × 2599.1

u1 = 4017.6 kJ/kg

The final internal energy of the steam in the cylinder is given as follows:

u2 = hf + x2 hfg

u2 = 102.2 + 0.7917 × 2497.5

u2 = 1988.6 kJ/kg

Heat loss from the cylinder, Q = 90 kJ

We can use the first law of thermodynamics, which states that:Q = m(u2 - u1) - work done by steam

The work done by steam is negligible in the process as it is maintained at constant pressure. Thus, the equation becomes:

Q = m(u2 - u1)

0.0407 (1988.6 - 4017.6) = -90m = 0.0407 kg

Learn more about cylinder at

https://brainly.com/question/16290574

#SPJ11

A net torque on an object will cause the angular acceleration to change. The correct option is B.

Torque is the rotational equivalent of force. It is a vector quantity that is defined as the product of the force applied to an object and the distance from the point of application of the force to the axis of rotation. The net torque on an object will cause the angular acceleration of the object to change.

The rotational mass of an object is the resistance of the object to changes in its angular velocity. It is a measure of the inertia of the object to rotation. The net torque on an object will not cause the rotational mass of the object to change.

Translational motion is the motion of an object in a straight line. The net torque on an object will not cause translational motion.

The angular velocity of an object is the rate of change of its angular position. The net torque on an object will cause the angular velocity of the object to change.

To learn more about angular acceleration click here

https://brainly.com/question/30237820

#SPJ11

Given information Magnitude of charge 1 = +6.00μCMagnitude of charge 2 = +5.00μCLocation of charge 1 = 4.00cm i +3.00cm j Location of charge 2 = 6.00cm i -8.00cm j Find the force between charge 1 and charge 2.

Force between the two charges is given byF12 = (kq1q2) / r^2Where k is the Coulomb’s constant and is given byk = 9 x 10^9 Nm^2/C^2q1 and q2 are the magnitudes of the charges and r is the distance between the two charges.F12 = (9 x 10^9 Nm^2/C^2) (6.00μC) (5.00μC) / r^2First, find the distance between the two charges.

We know that charge 1 is located at 4.00cm i + 3.00cm j and charge 2 is located at 6.00cm i - 8.00cm j. Distance between the two charges is given byr = √((x₂-x₁)² + (y₂-y₁)²)r = √((6.00 - 4.00)² + (-8.00 - 3.00)²)r = √(2.00² + 11.00²)r = √125r = 11.18cmPutting the value of r in the formula of F12, we haveF12 = (9 x 10^9 Nm^2/C^2) (6.00μC) (5.00μC) / (11.18cm)²F12 = 17.3 x 10^5 NThe force between the two charges is 17.3 x 10^5 N.Answer:F12 = 17.3 x 10^5 N.

To know more about Magnitude visit:

https://brainly.com/question/31022175

#SPJ11

The force on a human body due to the atmosphere at sea level having a total surface area of 1.7 m² is 1.717 x 10^4N. Surface area refers to the entire region that covers a geometric figure. In mathematics, surface area refers to the amount of area that a three-dimensional shape has on its exterior.

Force is the magnitude of the impact of one object on another. Force is commonly measured in Newtons (N) in physics. Force can be calculated as the product of mass (m) and acceleration (a), which is expressed as F = ma.

If the human body has a total surface area of 1.7 m², The pressure on the body is given by P = 1.01 x 10^5 Pa. Therefore, the force (F) on the human body due to the atmosphere can be calculated as F = P x A, where A is the surface area of the body. F = 1.01 x 10^5 Pa x 1.7 m²⇒F = 1.717 x 10^4 N.

Therefore, the force on a human body due to the atmosphere at sea level having a total surface area of 1.7 m² is 1.717 x 10^4 N.

Let's learn more about Surface area:

https://brainly.com/question/16519513

#SPJ11

When a convex lens has a focal length of f and an object is placed at a position greater than 2f that is beyond the centre of curvature on the axis, then the image is formed between the centre of curvature and focus.

When the object is located beyond the centre of curvature of a convex lens, the image formed is real, inverted, and diminished. This means that the image is formed on the opposite side of the lens compared to the object, it is upside down, and its size is smaller than the object.

As light rays from the object pass through the lens, they refract (bend) according to the lens's shape and material properties. For a convex lens, parallel rays converge towards the principal focus after passing through the lens.

Therefore, when a convex lens has a focal length of f and an object is placed at a position greater than 2f that is beyond the centre of curvature on the axis, then the image is formed between the centre of curvature and focus.

Learn more about Convex Lens from the given link:

https://brainly.com/question/12213784

#SPJ11

Given objects A (6 kg) and B (14 kg), with total momentum of 54 kg m/s and total final energy (200 + X/2) J, intersection points need to be plotted.

Question 1:

To find the linear momentum equation and quadratic energy equation, we can use the given information. Let's denote the velocities of objects A and B as vA and vB, respectively.

Linear Momentum Equation:

Total momentum = momentum of object A + momentum of object B

54 kg m/s = 6 kg * vA + 14 kg * vB

Quadratic Energy Equation:

Total final energy = kinetic energy of object A + kinetic energy of object B

200 J + X/2 J = (1/2) * 6 kg * (vA)^2 + (1/2) * 14 kg * (vB)^2

Please note that without the specific value of X, we cannot calculate the quadratic energy equation accurately.

Question 2:

To illustrate the initial and final conditions of the collision, we can use vector notation to represent the numeric information.

Initial Condition:

Object A:

Mass: 6 kg

Velocity: vA m/s (unknown)

Momentum: pA = 6 kg * vA

Object B:

Mass: 14 kg

Velocity: vB m/s (unknown)

Momentum: pB = 14 kg * vB

Final Condition:

After the collision, we have the following information:

Total momentum: 54 kg m/s

Total final energy: (200 + X/2) J (with unknown value of X)

Assumptions:

To proceed with the calculations, we typically assume an elastic collision, where kinetic energy is conserved. However, without more specific information or assumptions about the collision (e.g., angles, coefficients of restitution), it's challenging to provide a complete analysis.

I recommend using the given equations and values in Excel or another graphing tool to plot the momentum and energy equations and find the intersection points. You can then determine the numeric values of the intersection points directly from the graph.

To know more about momentum, click here:

brainly.com/question/24030570

#SPJ11

A 2.0 kg object is tossed straight up in the air with an initial speed of 15 m/s. The time it takes for the object to return to its original position is approximately 3.0 seconds (option C).

To find the time it takes for the object to return to its original position, we need to consider the motion of the object when it is tossed straight up in the air.

When the object is thrown straight up, it will reach its highest point and then start to fall back down. The total time it takes for the object to complete this upward and downward motion and return to its original position can be determined by analyzing the time it takes for the object to reach its highest point.

We can use the kinematic equation for vertical motion to find the time it takes for the object to reach its highest point. The equation is:

v = u + at

Where:

v is the final velocity (which is 0 m/s at the highest point),

u is the initial velocity (15 m/s),

a is the acceleration due to gravity (-9.8 m/s^2), and

t is the time.

Plugging in the values, we have:

0 = 15 + (-9.8)t

Solving for t:

9.8t = 15

t = 15 / 9.8

t ≈ 1.53 s

Since the object takes the same amount of time to fall back down to its original position, the total time it takes for the object to return to its original position is approximately twice the time it takes to reach the highest point:

Total time = 2 * t ≈ 2 * 1.53 s ≈ 3.06 s

Therefore, the time it takes for the object to return to its original position is approximately 3.0 seconds (option C).

For more such questions on time, click on:

https://brainly.com/question/26969687

#SPJ8

r(R₂) ≈ √(L₂ + R₁₂) + 2kρL ln(R₁ / R₂) / √(L₂ + R1₂). The electric field at point P is then: E = kρ / r₂ ≈ kρ / [L₂ + R₁₂ + 2kρL ln(R₁ / R₂)]. The contribution of a small element of the cylinder with length dx, charge density ρ, and radius x to the electric field at point P is : dE = k · ρ · dx / r

The contribution of a small element of the cylinder with length dx, charge density ρ, and radius x to the electric field at point P is : dE = k · ρ · dx / r, where k is Coulomb's constant. We can use the Pythagorean theorem to relate r and x: r₂= L₂ + (R₁ - x)₂

Squaring both sides and differentiating with respect to x yields: 2r · dr / dx = -2(R₁ - x)

Therefore, dr / dx = -(R₁ - x) / r

Integrating this expression from x = 0 to x = R₂,

we obtain: r(R₂) - r(0) = -∫0R₂(R₁ - x) / r dx

We can use the substitution u = r₂ to simplify the integral:∫1r₁ du / √(r₁₂ - u) = -∫R₂₀(R₁ - x) dx / xR₁ > R₂, the integral can be approximated as: ∫R₂₀(R₁ - x) dx / x ≈ 2(R₁ - R₂) ln (R₁ / R₂)

Therefore: r(R₂) ≈ √(L₂ + R₁₂) + 2kρL ln(R₁ / R₂) / √(L₂ + R1₂)

The electric field at point P is then: E = kρ / r₂ ≈ kρ / [L₂ + R₁₂ + 2kρL ln(R₁ / R₂)]

To know more about electric field, refer

https://brainly.com/question/19878202

#SPJ11

When comparing purple light (λ = 400 nm) and red light (λ = 800 nm) with the same area of illumination, the purple light wave will have a stronger electric field.

The electric field strength of a light wave is determined by its intensity, which is proportional to the square of the electric field amplitude.

Intensity ∝ (Electric field amplitude)^2

Since intensity is constant for both purple and red light waves in this comparison, the only difference lies in the wavelengths. Shorter wavelengths correspond to higher frequencies and, consequently, larger electric field amplitudes. In this case, purple light with a wavelength of 400 nm has a shorter wavelength than red light with a wavelength of 800 nm. Thus, the electric field amplitude of purple light is greater, resulting in a stronger electric field strength compared to red light.

Learn more about electric field here:

brainly.com/question/11482745

#SPJ11

Hot air rises due to its lower density compared to cold air. As you climb a mountain, the atmospheric pressure decreases, and the air becomes less dense. This decrease in density leads to a decrease in temperature.

Here's a step-by-step explanation:

1. As you ascend a mountain, the air pressure decreases because the weight of the air above you decreases. This decrease in pressure causes the air molecules to spread out and become less dense.

2. When the air becomes less dense, it also becomes less able to hold heat. Air with low density has low thermal conductivity, meaning it cannot efficiently transfer heat.

3. As a result, the heat energy in the air is spread out over a larger volume, causing a decrease in temperature. This phenomenon is known as adiabatic cooling.

4. Adiabatic cooling occurs because as the air rises and expands, it does work against the decreasing atmospheric pressure. This work requires energy, which is taken from the air itself, resulting in a drop in temperature.

5. So, even though hot air rises, the decrease in atmospheric pressure as you climb a mountain causes the air to expand, cool down, and become cooler than the surrounding air.

In summary, the decrease in density and pressure as you climb a mountain causes the air to expand and cool down, leading to a decrease in temperature.

To know more about density visit:

https://brainly.com/question/29775886

#SPJ11

The total energy given by the battery to the electric charge during their march from one electrode to the other is 40 J.

A 4 V battery is connected to a circuit and causes an electric current. 10 C of charge passes between its electrodes + and -. The battery gave them, during their march from one electrode to the other, a total of 40 J. Electric potential difference is known as the potential difference between two points in an electric circuit. Voltage is an energy unit that has potential energy. A battery is an electrochemical device that converts chemical energy into electrical energy. A battery has two electrodes that are the positive and negative terminals, and the flow of electric current is caused by the movement of electrons from one terminal to the other.

The electric charge can be calculated by the formula q = i x t Where,q is the charge in coulombs is  the current in ampere is the time in seconds Therefore, for the given values,i = 1 AT = 10 seconds q = i x tq = 1 x 10q = 10 C The electric potential difference between the electrodes is 4 V. The work done by the battery to move 10 C of charge from one electrode to the other can be calculated using the formula W = q x VW = 10 x 4W = 40 J Therefore, the total energy given by the battery to the electric charge during their march from one electrode to the other is 40 J.

To know more about battery  visit

https://brainly.com/question/16791263

#SPJ11

Answer:

Fractional calculus is a branch of mathematics that deals with the calculus of functions that are not differentiable at all points. This can be useful for modeling physical processes that involve memory or dissipation, such as viscoelasticity, diffusion, and wave propagation.

Explanation:

Some physical processes that need to use fractional calculation include:

Viscoelasticity: Viscoelasticity is a property of materials that exhibit both viscous and elastic behavior. This can be modeled using fractional calculus, as the fractional derivative of a viscoelastic material can be used to represent the viscous behavior, and the fractional integral can be used to represent the elastic behavior.

Diffusion: Diffusion is the movement of molecules from a region of high concentration to a region of low concentration. This can be modeled using fractional calculus, as the fractional derivative of a diffusing substance can be used to represent the rate of diffusion.

Wave propagation: Wave propagation is the movement of waves through a medium. This can be modeled using fractional calculus, as the fractional derivative of a wave can be used to represent the attenuation of the wave.

Fractional calculus is a powerful tool that can be used to model a wide variety of physical processes. It is a relatively new field of mathematics, but it has already found applications in many areas, including engineering, physics, and chemistry.

Learn more about Fractional calculus.

https://brainly.com/question/33261308

#SPJ11