Answer:
This is true.
Explanation:
Question
2 Points
An object in a fluid will sink if:
A. the buoyant force is larger than the weight of the object.
B. the buoyant force is larger than the mass of the object.
C. the buoyant force is smaller than the weight of the object.
D. the buoyant force is smaller than the mass of the object.
SUBM
Answer:
c
Explanation:
when the weight of the object is greater than the buoyant force sinking is occurred.
Which image best represents the particles in liquids
Answer:
The 2nd Picture represents the particles in liquids.
Explanation:
Energy that is not utilized for work or heat transfer is converted to the chemical energy of body fat containing about 39 kJ/g. How many grams of fat will you gain if you eat 10,000 kJ (about 2390 kcal) one day and do nothing but sit relaxed for 14.3 h and sleep for the other 9.70 h
Answer:
[tex]m=107.8g[/tex]
Explanation:
Hello,
In this case, for the given information, we can compute the gained grams by firstly compute the energy consumed by 14.3 h of being sit relaxed and 9.70 h of sleeping:
[tex]E_{sit}=120\frac{J}{s}*\frac{3600s}{1h} *14.3h*\frac{1kJ}{1000J} =6177.6kJ\\\\E_{sleep}=83\frac{J}{s}*\frac{3600s}{1h} *9.70h*\frac{1kJ}{1000J} =2898.36kJ[/tex]
Then, we compute the energy used that day:
[tex]E_T=10000kJ-2898.36kJ-6177.6kJ=4203.28kJ[/tex]
Finally, the mass by considering the consumed fat:
[tex]m=\frac{4203.28kJ}{39kJ/g} \\\\m=107.8g[/tex]
Regards.
Arrange the ff substances in order of increasing tendency to donate electrons with reasons
Alpha- ketoglutarate, Oxaloacetate ,O2, NADP+, Malate
Answer:
Alpha- ketoglutarate --> NADP+ --> Oxaloacetate --> O2.
(O2 has the HIGHEST tendency to donate electrons).
Explanation:
Okay, we are to Arrange Alpha- ketoglutarate, Oxaloacetate ,O2, NADP+ and Malate in order of increasing tendency to donate electrons, therefore, the correct order is;
Alpha- ketoglutarate --> NADP+ --> Oxaloacetate --> O2.
And this result can be gotten if we consider these compounds in their oxidative mechanism and check their potential values.
(1). When Alpha- ketoglutarate react with CO2, it gives isocitrate and standard redox potential value of -0.38.
(2). NADP+ with react with two moles of electrons and one mole of hydrogen ion to produce NADPH and standard redox potential value of -0.32.
(3). Oxaloacetate will react with two moles of hydrogen ion and electrons respectively to produce standard redox potential value of -0.18 and Malate.
(4). O2 will react with 4 moles of hydrogen ion and electrons respectively to produce 2 moles of water and standard redox potential value of +0.82.
CONCLUSION: the higher the negative values of the potential, the lesser the electron affinity and vice versa.
A solution has a hydrogen ion (or hydronium ion) concentration of 1.00×10−9 M.
What is the pH of the solution?
7.5
8.0
8.5
9.0
Suppose you are titrating a sulfuric acid solution of unknown concentration with a sodium hydroxide solution according to the equation H 2 S O 4 + 2 N a O H ⟶ 2 H 2 O + N a 2 S O 4 If you require 28.07 mL of 0.697 M NaOH solution to titrate 220.1 mL of H 2 SO 4 solution, what is the concentration of the H 2 SO 4 solution? Type answer:
Answer:
[tex]M_{acid}=0.0444M[/tex]
Explanation:
Hello,
In this case, for the given reaction:
[tex]H _2 S O _4 + 2 N a O H \rightarrow 2 _H 2 O + N a _2 S O_ 4[/tex]
We find a 1:2 molar ratio between the acid and the base respectively, for that reason, at the equivalence point we find:
[tex]2*n_{acid}=n_{base}[/tex]
That in terms of concentrations and volumes we can compute the concentration of the acid solution:
[tex]2*M_{acid}V_{acid}=M_{base}V_{base}\\\\M_{acid}=\frac{M_{base}V_{base}}{2*V_{acid}}=\frac{0.697M*28.07mL}{2*220.1mL}\\ \\M_{acid}=0.0444M[/tex]
Best regards.
The concentration of the sulfuric acid solution (H₂SO₄) is 0.0444 M
From the question,
We are to determine the concentration of the H₂SO₄ solution
Using the titration formula
[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]
Where
[tex]C_{A}[/tex] is the concentration of acid
[tex]C_{B}[/tex] is the concentration of base
[tex]V_{A}[/tex] is the volume of acid
[tex]V_{B}[/tex] is the volume of base
[tex]n_{A}[/tex] is the mole ratio of acid
and [tex]n_{B}[/tex] is the mole ratio of base
The given balanced chemical equation for the reaction is
H₂SO₄ + 2NaOH ⟶ 2H₂O + Na₂SO₄
∴ [tex]n_{A} = 1[/tex]
and [tex]n_{B} = 2[/tex]
From the given information
[tex]V_{A} = 220.1 \ mL[/tex]
[tex]C_{B} = 0.697 \ M[/tex]
[tex]V_{B} = 28.07 \ mL[/tex]
Putting the parameters into the equation, we get
[tex]\frac{C_{A} \times 220.1}{0.697 \times 28.07}= \frac{1}{2}[/tex]
∴ [tex]C_{A} = \frac{1 \times 0.697 \times28.07}{2\times 220.1}[/tex]
[tex]C_{A} = \frac{19.56479}{440.2}[/tex]
[tex]C_{A} = 0.0444 \ M[/tex]
Hence, the concentration of the sulfuric acid solution (H₂SO₄) is 0.0444 M
Learn more here: https://brainly.com/question/25290615
will give brainliest
Explain why someone would choose to use octane in a car engine rather than octene?
Upon the addition of water, As2O3 is converted to H3AsO3. During the titration H3AsO3 is oxidized to H3AsO4 and MnO4- is reduced to Mn2 . Write a balanced net ionic equation for the reaction
Answer:
5H3AsO3(aq) + 2MnO4-(aq) + 6H+(aq) → 5H3AsO4(aq) + 2Mn2+(aq) + 3H2O(aq)
Explanation:
Every net balanced ionic equation is composed of a union of two half equations;
The oxidation half equation (indicating electron loss) and the reduction half equation (indicating electron gain). Remember that redox reactions is a process in which electrons are lost and gained by chemical species simultaneously. One specie looses electrons in the oxidation half equation while the other specie gains electrons in the reduction half equation.
The balanced redox reaction equation shows the overall redox process and shows at a glance the total number of elect tribe lost or gained in the redox process. The overall redox reaction equation for the titration described in the question is;
5H3AsO3(aq) + 2MnO4-(aq) + 6H+(aq) → 5H3AsO4(aq) + 2Mn2+(aq) + 3H2O(aq)
(B1-MC-12) How many of the following are oxidation-reduction reactions? NaOH (aq) + HCl (aq) → NaCl (aq) + H2O (l) Cu (s) + 2AgNO3 (aq) → 2Ag (s) + Cu(NO3)2 (aq) Mg(OH)2 (s) → MgO (s) + H2O (l) N2 (g) + 3H2 (g) → 2NH3 (g) a. 0 b. 1 c. 2 d. 3 e. 4
Answer:
C
Explanation:
They involve losing and gaining of electrons therefore there is a change of state from either solid to aqueous or vise versa
Among the given reactions only two are oxidation-reduction reactions.
Cu (s) + 2AgNO₃ (aq) → 2 Ag (s) + Cu(NO₃)₂
N₂ (g) + 3 H₂ (g) → 2 NH₃
Therefore, option (c) is correct.
What are the oxidation-reduction reactions?The reactions involve the transfer of electrons from one chemical substance to another chemical substance. These electron-transfer reactions are known as redox reactions or oxidation-reduction reactions.
These reactions involved energy changes in the form of heat, light, electricity, etc. The oxidation and reduction reaction is accompanied by the addition of oxygen or hydrogen to different substances.
The first reaction is NaOH (aq) + HCl (aq) → NaCl (aq) + H₂O. In which there is no change in the oxidation number of elements therefore, it is not a redox reaction.
In the second reaction, Cu (s) + 2AgNO₃ (aq) → 2 Ag (s) + Cu(NO₃)₂ . There is a change in the oxidation state of copper from 0 to +2 and the oxidation number of Ag from +1 to 0. It means both oxidation and reduction are involved in this chemical reaction.
In the third reaction Mg(OH)₂ (s) → MgO (s) + H₂O (l), again there is no change in the oxidation number of Mg. The fourth reaction is the formation of ammonia in which the oxidation number of N changes from 0 to -3 and the H from 0 to +1. Therefore, it is an oxidation-reduction reaction.
Learn more about oxidation-reduction reactions, here:
https://brainly.com/question/13559667
#SPJ2
Temperature on Reaction Rate Use the drop-down menus to answer the questions. Which form of the sodium bicarbonate tablet has the most surface area? As the surface area increases, what happens to the average time required for the reaction?
Answer:Crushed, decreased
Explanation:
Just got it right
Which elements cannot have more than an octet of electrons? Select all that apply
C
S
O
N
Br
Answer:
{ Carbon, Oxygen, Nitrogen }
Explanation:
Elements can only have more than an octet of electrons if they demonstrate an expanded octet. This is if they belong to groups in or beyond the third group. Why? Well these elements have d - orbitals that they can rely on to expand the number of electrons that could otherwise be limited. * Here we are focusing on main group elements, P - block elements more specifically. *
Carbon belongs to the 2 group, and thus doesn't have an empty d - orbital. Thus, it can't have more than an octet of electrons. Sulfur belongs to group 3, hence has an empty d - orbital, and can have more than an octet of electrons. Oxygen belongs to the 2 group, and thus doesn't have an empty d - orbital, so it can't have more than an octet of electrons. Same goes for Nitrogen. Bromine belongs to group 4, thus has empty d - orbitals, and can expand further than Sulfur can - it can have more than an octet of electrons.
Solution = { Carbon, Oxygen, Nitrogen }
A student is given 1.525 g of pure CuO. To recover the Cu present in the compound, the dark powdery solid was dissolved in 15.0 mL of 6 M HCl, the solution diluted with 50.0 mL of water, and 0.50 g of Mg was added. Was this enough Mg to displace all the ions from the solution
Answer:
The amount of Mg was enough
Explanation:
In this case, we have to start with the reaction between [tex]Mg[/tex] and [tex]CuO[/tex], so:
[tex]CuO~+~Mg~->~MgO~+~Cu[/tex]
If we check the reaction is already balanced. Now, we can do some stoichiometry to calculate the amount of Mg. The first step is the number of moles of [tex]CuO[/tex]. To this we have to calculate the molar mass of [tex]CuO[/tex] first, so:
Cu: 63.55 g/mol and O: 16 g/mol. So, (63.55+16)= 79.55 g/mol.
Now, we can calculate the moles:
[tex]1.525~g~CuO\frac{1~mol~CuO}{79.55~g~CuO}=0.0192~mol~CuO[/tex]
The molar ratio between [tex]Mg[/tex] and [tex]CuO[/tex] is 1:1, so:
[tex]0.0192~mol~CuO=0.0192~mol~Mg[/tex].
Now we can calculate the mass of Mg if we know the atomic mass of Mg (24.305 g/mol). So:
[tex]0.0192~mol~Mg\frac{24.305~g~Mg}{1~mol~Mg}=0.466~g~Mg[/tex]
With this in mind, the student added enough Mg to recover all the Cu.
Note: The HCl doesn't take a role in the reaction. The function of HCl is to dissolve the [tex]CuO[/tex].
I hope it helps!
What solubility a measure of
Answer:
The amount of solute that will dissolve
Explanation:
A P E X
Question 1 of 10
How is each element represented in the periodic table?
A. Each element is in an order based on alphabetical order.
B. Each element is listed as an abbreviation of the first letters of its
DE ME
C. Each element is represented by a one or two-letter symbol.
D. Each element is listed in its own box based on when it was
discovered
Answer:
C
Explanation:
A- incorrect, not in alphabetical order
B- incorrect, symbol for salt in NA not SA
C- correct
D- incorrect, not based on discovery
Each element represented in the periodic table is represented by a one or two-letter symbol.Hence , Option (C) is Correct.
What is Periodic Table ?
The periodic table, also known as the periodic table of the elements, is a tabular display of the chemical elements.
It is widely used in chemistry, physics, and other sciences, and is generally seen as an icon of chemistry.
Each element represented in the periodic table is represented by a one or two-letter symbol.Hence , Option (C) is Correct.
Learn more Periodic Table here ;
https://brainly.com/question/11155928
#SPJ2
There are 154,000 mg of sugar in a
container of orange juice at Mindy's
house. She only wants to have 11 g of
sugar from the orange juice per day.
How many days can she drink the
orange juice before it is gone?
Explanation:
1g = 1000mg
154000mg = 154g
No of days she can drink = 154÷ 11 = 14days
DATA AND CALCULATIONS: (you must show your calculations) Part I. Determination of accuracy of a graduated cylinder Calculations: Experimental Step Measurable Mass of empty graduated cylinder 47.229 g Mass of filled graduated cylinder 71.821 g Mass of water (filled – empty) g Volume of water, calculated (calculated from mass of water, using the equation “density = mass/volume”, given the fact that the density of water is exactly 1 g/mL) mL Volume of water, measured (from the reading of the scale on the graduated cylinder) 25.0 mL Percent difference between measured and calculated volumes of water [(measured-calculated)/calculated] ×100% %
Answer:
[tex]\large \boxed{2 \, \%}[/tex]
Explanation:
1. Data
Mass of graduated cylinder = 47.229 g
Mass of graduated cylinder + water = 71.821 g
Actual volume of water = 25.0 mL
2. Calculations
(a) Mass of water
Mass = 71.821 g -47.229 g = 24.592 g
(b) Volume of water
[tex]\text{Volume} = \dfrac{\text{mass}}{\text{volume }} = \dfrac{\text{24.592 g}}{\text{ 1 g/mL}} = \text{24.592 mL}[/tex]
(c) Percent Difference
[tex]\begin{array}{rcl}\text{Percent difference}&= &\dfrac{\lvert \text{Measured - Calculated}\lvert}{ \text{Calculated}} \times 100 \,\%\\\\& = & \dfrac{\lvert 25.0 - 24.492\lvert}{24.492} \times 100 \, \% \\\\& = & \dfrac{\lvert 0.5\lvert}{24.492} \times 100 \, \%\\ \\& = & 0.02 \times 100 \, \%\\& = & \mathbf{2 \, \%}\\\end{array}\\\text{The percent difference is $\large \boxed{\mathbf{2 \, \%} }$}[/tex]
A sample of gas has a volume of 571 mL at a pressure of 4.04 atm. The gas is compressed and now has a pressure of 7.17 atm. Predict whether the new volume is greater or less than the initial volume, and calculate the new volume. Assume temperature is constant and no gas escaped from the container.
Answer:
The new volume is less than the initial volume.
The new volume is 322mL
Explanation:
Based on Boyle's law, the pressure of a gas is inversely proportional to its volume under constant temperature. That means if the pressure of a gas is increased, the volume decrease and vice versa. The formula is:
P₁V₁ = P₂V₂
Where P is pressure and V is volume of 1, initial state and 2, final states.
In the problem, the pressure of the gas increased from 4.04atm to 7.17atm, That means the new volume is less than initial volume because the gas is compressed occupying less volume.
Replacing in Boyle's equation:
4.04atm*571mL = 7.17atmV₂
322mL = V₂Beeing the new volume of the compressed gas 322mL
Arrange the compounds in order of increasing acid strength. Consult the references section for pKa values of each acid. Suppose the strongest acid is b, the acid of intermediate strength is c and the weakest acid is a Then this leads to the following input:
a. CH 3NH3
Methylammonium ion
b. CH3 COH
Acetic acid
c. H2S
Hydrogen sulfide
The strongest acid is b, the acid of intermediate strength is c and the weakest acid is a Then this leads to the H2S (Hydrogen sulfide). Therefore, option C is correct.
What do you mean by an acid ?A chemical that, when combined with certain metals, emits hydrogen ions in water and forms salts. Acids have a sour taste and cause certain dyes to turn red.
An acid is a substance that releases hydrogen ions into solution, whereas a base or alkali absorbs hydrogen ions.
In an aqueous solution or water, a weak acid is an acid that has been partially dissociated into its ions. A strong acid, on the other hand, completely dissociates into its ions in water. The pH of weak acids is higher than that of strong acids.
Thus, The strongest acid is b, the acid of intermediate strength is c and the weakest acid is a Then this leads to the H2S, option C is correct.
To learn more about the acid, follow the link;
https://brainly.com/question/14072179
#SPJ2
Carry out the following operations as if they were calculations of experimental results and express each answer in standard notation with the correct number of significant figures and wtih the correct units. Provide both the answer and the units.
1. 5.6792 m + .6 m + 4.33 m
2. 3.70 g - 2.9133 g
3. 4.51 cm x 3.6666 cm
Answer:
1. [tex]10.6\; \rm m[/tex] (one decimal place.)
2.[tex]0.79\; \rm g[/tex] (two decimal places.)
3. [tex]16.5\;\rm cm^2[/tex] (three significant figures.)
Explanation:
1.The first and second expressions are additions and subtractions. When adding two numbers, the accuracy of the result is given by the number of decimal places in it. The result should have as many decimal places as the input with the least number of decimal places.
For example, in the first expression:
[tex]5.6792\;\rm m[/tex] has four decimal places.[tex]0.6\; \rm m[/tex] has only one decimal place.[tex]4.33\; \rm m[/tex] has two decimal places.Therefore, the result should be rounded to one decimal place. Note that these units are compatible for addition, since they are all the same. The result should have the same unit (that is: [tex]\rm m[/tex].)
Therefore:
[tex]\rm 5.6792\; m + 0.6\; m + 4.33\; m \approx 10.6\; \rm m[/tex]. (Rounded to one decimal place.)
2.Similarly:
[tex]\rm 3.70\; \rm g[/tex] has two decimal places.[tex]2.9133\; \rm g[/tex] has four decimal places.Therefore, the result should be rounded to two decimal places. Its unit should be [tex]\rm g[/tex] (same as the unit of the two inputs.)
[tex]\rm 3.70\; g - 2.9133\; g \approx 0.79\; \rm g[/tex]. (Rounded to two decimal places.)
3.When multiplying two numbers, the accuracy of the result should be based on the number of significant figures in it. The result should have as many significant figures as the input with the least number of significant figures. In this expression:
[tex]4.51\; \rm cm[/tex] has three significant figures.[tex]3.6666\; \rm cm[/tex] has five significant figures.Therefore, the result should have only three significant figures.
The unit of the result is supposed to be the product of the units of the input. In this expression, that unit will be [tex]\rm cm \cdot cm[/tex], which is occasionally written as [tex]\rm cm^2[/tex].
[tex]\rm 4.51 \; cm \times 3.6666 \; cm \approx 16.5\; \rm cm^2[/tex]. (Rounded to three significant figures.)
Which of the following is a correct representation of the isotope of sulfur that has 19 neutrons? sulfur-19 sulfur-35 sulfur-16 sulfur-32
Answer:
sulfur-35
Explanation:
Sulfur-35 is a radioactive isotope that contains 19 neutrons.
Isotopes are represented with mass numbers. Mass number is the addition of number of proton and number of neutrons.
The number of proton in sulfur = 16
Number of neutron = 19
So, mass number = no. of protons + no. of neutrons
= 16 + 19
= 35
Hence, the correct answer is sulfur-35.
Answer:
sulfur -35
sulfur negative thirty fiveChoose the species that is incorrectly matched with its electronic geometry.
1. BeBr2 : linear
2. CF4 : tetrahedral
3. NH3 : tetrahedral
4. H2O : tetrahedral
5. PF3 : trigonal bipyramidal
Answer:
PF3 : trigonal bipyramidal
Explanation:
PF3 has 4 domains around the central phosphorus (3 shared pairs and one lone pair of electrons), thus the electron geometry that has 4 domains is tetrahedral not trigonal bipyramidal
From the options the specie that is incorrectly matched is ( 5 ) ; PF₃ : trigonal bipyramidal
The specie PF₃ is composed of 3 shared pairs and one unshared pair of electrons ( i.e. It has 4 domains ) as seen in the Lewis structure of PF₃. therefore when writing its electronic geometry, it should expressed/written as tetrahedral and not trigonal bipyramidal.
Hence we can conclude that The specie that is incorrectly matched is PF3 : trigonal bipyramidal
Learn more : https://brainly.com/question/6903970
A gaseous mixture of O2 and N2 contains 37.8% nitrogen by mass. What is the partial pressure of oxygen in the mixture if the total pressure is 525 mmHg?
PLEASE HELP, will mark brainliest!!!
Answer: The partial pressure of oxygen in the mixture if the total pressure is 525 mmHg is 310 mm Hg
Explanation:
mass of nitrogen = 37.8 g
mass of oxygen = (100-37.8) g = 62.2 g
Using the equation given by Raoult's law, we get:
[tex]p_A=\chi_A\times P_T[/tex]
[tex]p_{O_2}[/tex] = partial pressure of [tex]O_2[/tex] = ?
[tex]\chi_{O_2} = mole fraction of O_2=\frac{\text{Moles of }O_2}{\text{Total moles}}[/tex]
[tex]P_{T}[/tex] = total pressure of mixture = 525 mmHg
[tex]{\text{Moles of }O_2}=\frac{\text {Given mass}}{\text {Molar mass}}=\frac{62.2g}{32g/mol}=1.94moles[/tex]
[tex]{\text{Moles of }N_2}=\frac{\text {Given mass}}{\text {Molar mass}}=\frac{37.8g}{28g/mol}=1.35moles[/tex]
Total moles = 1.94 + 1.35 = 3.29 moles
[tex]\chi_{O_2}=\frac{1.94}{3.29}=0.59[/tex]
[tex]p_{O_2}=\chi_{O_2}\times P_T=0.59\times 525=310mmHg[/tex]
Thus the partial pressure of oxygen in the mixture if the total pressure is 525 mmHg is 310 mm Hg
A gaseous mixture of O₂ and N₂ that contains 37.8% nitrogen by mass, and whose total pressure is 525 mmHg, has a partial pressure of oxygen of 310 mmHg.
A gaseous mixture of O₂ and N₂ contains 37.8% nitrogen by mass, that is, in 100 g of the mixture, there are 37.8 g of N₂. The mass of O₂ in 100 g of the mixture is:
[tex]mO_2 = 100 g - 37.8 g = 62.2 g[/tex]
We will convert both masses to moles using their molar masses.
[tex]N_2: 37.8 g \times 1 mol/28.00 g = 1.35 mol\\\\O_2: 62.2 g \times 1 mol/32.00 g = 1.94 mol[/tex]
The mole fraction of O₂ is:
[tex]\chi(O_2) = \frac{nO_2}{nN_2+nO_2} = \frac{1.94mol}{1.35mol+1.94mol} = 0.590[/tex]
Given the total pressure (P) is 525 mmHg, we can calculate the partial pressure of oxygen using the following expression.
[tex]pO_2 = P \times \chi(O_2) = 525 mmHg \times 0.590 = 310 mmHg[/tex]
A gaseous mixture of O₂ and N₂ that contains 37.8% nitrogen by mass, and whose total pressure is 525 mmHg, has a partial pressure of oxygen of 310 mmHg.
Learn more: https://brainly.com/question/14281129
From the given electron configurations, predict which one is for a representative element?
A) 1s22s22p63s23p64s2
B) 1s22s22p63s23p63d74s2
C) 1s22s22p63s23p63d64s2
D) 1s22s22p63s23d5
From the given electron configurations, predict which one is for a representative element is 1s₂, 2s₂, 2p₆,3s₂, 3p₆, 3d₆, 4s₂.
What is element ?A chemical element is a species of atoms, including the pure material made entirely of that species, that have a specific number of protons in their nuclei. Chemical elements, unlike chemical compounds, cannot be reduced by any chemical process into simpler molecules.
The most basic form of a material is an element. In general, it cannot be streamlined or divided into smaller parts. A component of an element is an atom. A certain element only has one kind of atom per atom. Protons, neutrons, and electrons, which are subatomic particles, make up atoms.
We begin by applying the aufbau principle to the prediction of the electron configuration of an atom. It instructs us to fill the lowest energy accessible orbital, one electron at a time. It operates through element 18 (argon) in a filling pattern that is simple to predict: 1s, 2s, 2p, 3s, then 3p.
Thus, option C is correct.
To learn more about element, follow the link;
https://brainly.com/question/13025901
#SPJ6