En un tanque se halla CO₂ a 285K ocupando un volumen de 8 L. En esas condiciones determinamos el volumen que ocupa a 393K, considerando que la presión se mantiene constante

Explanation:

hope it make sense to u :)

Answer: The list of elements from highest to lowest Ionization Energy is Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth.

Explanation:

The amount of energy required to remove the most loosely bound electron from an isolated gaseous atom or ion is called ionization energy.

Element with a half-filled orbital requires much more energy to remove an electron. This is because element with a half-filled electronic configuration is the most stable in nature.

More stable or tightly electrons are bound to the nucleus of an atom more will be its ionization energy. This also means that smaller is the atom higher will be its ionization energy.

When we move from top to bottom in a group the size of atom increases and the attraction between nucleus of atom and its valence electrons decreases. Hence, less will be the ionization energy.

Therefore, ionization energy decreases on moving down a group.

So, the given elements Phosphorus, Bismuth, Arsenic, Antimony, Nitrogen are all group 15 elements. Hence, decreasing order of their ionization energy is as follows.

Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth

Thus, we can conclude that the list of elements from highest to lowest Ionization Energy is Nitrogen > Phosphorus > Arsenic > Antimony > Bismuth.

Answer:

[tex]0.64molCr(NO_3)_3[/tex]

Explanation:

Hello there!

In this case, according to the given chemical equation, it turns out possible for us to realize there is a 4:3 mole ratio of chromium(III) nitrate to lead(IV) nitrate, and therefore, we can calculate the moles of the former by applying the shown below stoichiometry setup:

[tex]0.85molPb(NO_3)_4*\frac{3molCr(NO_3)_3}{4molPb(NO_3)_4} \\\\0.64molCr(NO_3)_3[/tex]

Regards!

Answer:

In a chemical reaction, reactants that are not used up when the reaction is finished are called excess reagents. The reagent that is completely used up or reacted is called the limiting reagent, because its quantity limits the amount of products formed.

Explanation:

The equation that correctly represents the dissociation of a strong acid in water is as follows: HCl → H+ + Cl−

Acid dissociation is the process by which an acid breaks up into it's constituent ions in an aqueous solution.

Acids are known to contain hydrogen ions (H+), hence, dissociate into H+ and an anion.

A strong acid like HCl dissociates completely in an aqueous solution while a weak acid does not dissociate completely.

According to this question, hydrogen chloride (HCl) is said to dissociate into hydrogen ion (H+) and chloride (Cl-) according to the following expression:

HCl → H+ + Cl−

Learn more about acid dissociation at: https://brainly.com/question/4363472

#SPJ1

Answer:

83.33ml

Explanation:

Firstly, let's notice that 200ml are equal to 0.2L

M=number of moles of the solute ÷ number of liters. Let's call the number of liter by x:

2.5=x÷0.2

x=2.5×0.2

x=0.5

It means you'll need 0.5 mol of HNO. But your solution have 6 moles per liter, so how much do you need? Divide the moles by 12 to have 0.5, so now you need to divide the liter per 12 too. The liter is equal to 1000ml, so:

1000ml÷12=83.33ml

Answer:

The balance equation of Ca(OH)2 + HCl ---> CaCl2 + H2O​

is

Ca(OH)2(s) + 2HCl(aq) ---> CaCl2(aq) +2H2O​ (l) (balanced equation)

Answer:

Activator effects a mixture if you put to much of the activator your using into a product or thing you are using.

Explanation:

For ex.

If you poor to much activator into slime it will make the slime hard and very wet it will ruin your slime completely so you will have to do it just right but start off pouring it slowly and mix and then more if it needs more.

Answer:

friend me on here and imma send you the link Explanation:

La cultura de Australia es una cultura occidental derivada principalmente de Gran Bretaña, pero también influenciada por la geografía única del continente australiano, la diversa aportación de aborígenes, isleños del Estrecho de Torres y otros pueblos de Oceanía. ... Los australianos son generalmente relajados, abiertos y directos.

Answer:

molar mass (molar weight)

Explanation:

Answer:

They live in the open snow

Explanation:

Answer:

having a smooth or lubricated surface may help decrease friction.

Explanation:

Answer:

A: Hydrogen bonding causes water to be strongly cohesive.

Explanation:

Water has a high surafce tension. Hence droplets of water

Water cannot dissolve non polar substances like oil; only polar

Water is actually less dense in solid form :)

Hydrogen bonding causes water to be strongly cohesive.

This sticking together of like substances is called cohesion. Depending on how attracted molecules of the same substance are to one another, the substance will be more or less cohesive. Hydrogen bonds cause water to be exceptionally attracted to each other. Therefore, water is very cohesive.

Cohesion, also called cohesive attraction or cohesive force, is the action or property of like molecules sticking together, being mutually attractive. It is an intrinsic property of a substance that is caused by the shape and structure of its molecules, which makes the distribution of surrounding electrons irregular when molecules get close to one another, creating an electrical attraction that can maintain a microscopic structure such as a water drop. In other words, cohesion allows for surface tension, creating a "solid-like" state upon which light-weight or low-density materials can be placed.

Learn more about Cohesion

https://brainly.com/question/18176896

#SPJ2

Answer:

24.6 years

Explanation:

Applying,

A = (A')[tex]2^{a/n}[/tex]..................... Equation 1

Where A = Original Tritium content in the wine, A' = Tritium content in the wine after decay, a = age of the old bottle, n = half life of Tritium

From the question,

Let A = X, therefore, A' = 0.25X

Given: n = 12.3 years

Substitute these values into equation 1

X = 0.25X([tex]2^{a/n}[/tex])

1 = 0.25×([tex]2^{a/12.3}[/tex])

1/0.25 =

4 = [tex]2^{a/12.3}[/tex]

[tex]2^{a/12.3}[/tex] = 2²

Equation the base,

a/12.3 = 2

a = 12.3×2

a = 24.6 years

Answer:

15.06 L

Explanation:

Using the ideal gas law equation:

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (0.0821 Latm/molK)

T = temperature (K)

According to the information provided in this question,

P = 3.50 atm

n = 1.9 moles

V = ?

T = 65°C = 65 + 273 = 338K

Using PV = nRT

V = nRT/P

V = (1.9 × 0.0821 × 338) ÷ (3.5)

V = 52.725 ÷ 3.5

V = 15.06 L

Answer:

b is the answer hope that helps

Answer:

bismuth

Explanation:

i think if not i am so sorry

Answer:30.573 Billion atoms are in one gram

Explanation:

Answer:

Half-life = 2.7 days

Explanation:

The radioactive decay of an isotope follows the equation:

Ln[A] = -kt + ln[A]₀

Where [A] could be taken as the amount of A after t time, k is decay constant, [A]₀ initial amount of A.

Replacing to solve k:

Ln[3.125g] = -k*13.5days + ln[100g]

-3.465736 = -k*13.5days

k = 0.2567days⁻¹

Half-life is:

half-life = ln2 / k

Answer:

bnsjsbbakakaisbsbwnsjznss

Explanation:

cnsjzjsnsnsjs ssnsnsnzksmnznnzna

Answer:

Phenolphthalein is a chemical compound with the formula C20H14O4 and is often written as "HIn" or "phph" in shorthand notation. Phenolphthalein is often used as an indicator in acid–base titrations. For this application, it turns colorless in acidic solutions and pink in basic solutions.

Answer:

Phenolphthalein is a chemical compound, a colorless crystalline solid, though pink in a alkaline solution, and is also used as an acid-base indicator.

Explanation:

Answer:

506.0 g sodium and 778.8 g chlorine gas

Explanation:

The elements from which sodium chloride (NaCl) is composed are sodium (Na) and chlorine (Cl). Thus, the chemical equation for the production of sodium chloride (NaCl) from sodium (Na) and chlorine gas (Cl₂) is the following:

2Na(s) + Cl₂(g) → 2NaCl(s)

According to the balanced equation, 2 moles of NaCl are produced from 2 moles of Na(s) and 1 mol of Cl₂. To produce 22.0 mol of NaCl, we need:

22.0 mol NaCl x 2 mol Na(s)/2 mol NaCl = 22.0 mol Na(s)

22.0 mol NaCl x 1 mol Cl₂/2 mol NaCl = 11.0 mol Cl₂

Now, we convert the moles of each reactant to grams with the molar mass (MM) of the compound:

MM(Na) = 23 g/mol

22.0 mol Na x 23 g/mol = 506.0 g Na(s)

MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

11.0 mol Cl₂ x 70.8 g/mol = 778.8 g Cl₂

Therefore, it is required a mass of 506.0 grams of Na(s) and a mass of 778.8 grams of Cl₂ to produce 22.0 mol of NaCl.

Answer:

Your answer would be D, Hope this helps.

Answer:

B

Explanation:

There's a three in front of the CH3COOH. But let's figure it out without that 3.

1 mol of CH3COOH has 3 H from CH3 and 1 hydrogen at the end. In all 4 hydrogens.

Now put the 3 in front 3CH3COOH multiplies everything by 3. So you had 4 before and with the 3 in front you must have 12.

Try it. Draw it out.

CH3COOH     has 4

CH3COOH     has 4

CH3COOH     has 4

Total                      12

That's B

Answer:

you can test carbon dioxide gas with calcium hydroxide

hope this is what you're looking for

stay safe and have a nice day

✌◕ ◡ ◕✌

Answer:

4. Atmospheric pressure decreases as altitude increases.

Explanation:

hope this helps and is right. p.s i really need brainliest :)

Answer: The total mass of reactants and products is the same during a chemical reaction.

Explanation:

the total mass of reactants is equal to the total mass of products.

Answer:

8.8g of Al are necessaries

Explanation:

Based on the reaction, 2 moles of Al are required to produce 3 moles of hydrogen gas.

To solve this question we must find the moles of H2 in 11L at STP using PV = nRT. With these moles we can find the moles of Al required and its mass as follows:

Moles H2:

PV = nRT; PV/RT = n

Where P is pressure = 1atm at STP; V is volume = 11L; R is gas constant = 0.082atmL/molK and T is absolute temperature = 273.15K at STP

Replacing:

1atm*11L/0.082atmL/molK*273.15K = n

n = 0.491 moles of H2 must be produced

Moles Al:

0.491 moles of H2 * (2mol Al / 3mol H2) = 0.327moles of Al are required

Mass Al -Molar mass: 26.98g/mol-:

0.327moles of Al * (26.98g / mol) = 8.8g of Al are necessaries