Answer:
6 6 6 6 6 6 6 6 6 6 66 666666666
An ionic compound is
A.a salt
B.held together by a transfer of electrons
C.composed of anions and cations
D.held together by sharing of valence electrons
Which method of fossilization preserves the most detail of an organism?
petrified fossils
frozen or mummified fossils
trace fossils
hollowed fossil cavities
these are the choices
Answer:
B. frozen or mummified fossils
This is the correct answer :)
Answer:
B the answer
Explanation:
frozen or mummified fossils
Help! I am in a hurry! Will get brainliest if correct!
Answer:
nonmetel
Explanation:
Answer:
Its a non-metal
Explanation:
Elements that tend to gain electrons to form anions during chemical reactions are called non-metals. These are electronegative elements. They are non-lustrous, brittle and poor conductors of heat and electricity (except graphite). Non-metals can be gaseous, liquids or solids.
I will pick the brainiest answer! Thanks! :)
1. What is volume displacement? Why would you use this method?
2. What is density? What happens to things that are denser? What happens if they are less dense?
Answer:
1. The volume of displaced fluid is equivalent to the volume of an object fully immersed in a fluid or to that fraction of the volume below the surface of an object partially submerged in a liquid. The weight of the displaced portion of the fluid is equivalent to the magnitude of the buoyant force.
Why would you use this method?
So it can be used to accurately measure the volume of the human body and other oddly shaped objects by measuring the volume of fluid displaced when the object is submerged.
2. Density, mass of a unit volume of a material substance. The formula for density is d = M/V, where d is density, M is mass, and V is volume. Density is commonly expressed in units of grams per cubic centimetre.
What happens to things that are denser?
Students should realize that if an object weighs more than an equal volume of water, it is more dense and will sink, and if it weighs less than an equal volume of water, it is less dense and will float.
What happens if they are less dense?
The density of an object determines whether it will float or sink in another substance. An object will float if it is less dense than the liquid it is placed in. An object will sink if it is more dense than the liquid it is placed in.
1. Calculate the frequency and energy of a light wave with wavelength 30 m.
Answer:
10000000
Explanation:
Use wave equation: c=frequency * wavelength
c=3.00*10^8 m/s
Thus,
[tex]\frac{3.00*10^{8} }{30}[/tex]=10000000
What is the advantage of having valves in the
veins? What is the advantage of having valves in the veins
Isopentyl acetate is the molecule largely responsible for the aroma and taste of bananas. It is made up of carbon, hydrogen, and oxygen. Combustion of a 3.256-g sample of isopentyl acetate produces 7.706 g CO2 and 3.156 g H2O. Using these results, what is the correct empirical formula for isopentyl acetate?
Answer:
Explanation:
7.706 g of CO₂ will contain 12 x 7.706 / 44 g of C
= 2.1 g of C .
This will be contained in 3.256 g of isopentyl acetate
3.156 g of H₂O will contain 2 x 3.156 / 18 g of H
= .351 g of H
This will be contained in 3.256 g of isopentyl acetate
Rest will be oxygen
amount of oxygen in 3.256 g of isopentyl acetate
= 3.256 - ( 2.1 + .351 )
= .805 g
ratio of C , H , O in isopentyl acetate
= 2.1 g : .351 g : .805 g
2.1 / 12 : .351 / 1 : 0.805 / 16 ratio of moles
= .175 : .351 : .05 ratio of moles
= 3.5 : 7.02: 1
= 7 : 14 : 2
empirical formula of isopentyl acetate
= C₇ H₁₄ O₂ .
The volume of a fixed sample of a gas is 150 mL at 25°C , at what temperature will its volume increase to 350 mL ?
Answer:
it is 52.7
Explanation:
so when it is 30 the degree is 5°
when it is 60, the degree is 10°
when it is 90, the degree is 15° and so on...
Answer:
T₂ = 695.33 K
Explanation:
Given data:
Initial volume = 150 mL
Initial temperature = 25°C (25+273 = 298 K)
Final temperature = ?
Final volume = 350 mL
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₂ = V₂T₁ /V₁
T₂ = 350 mL × 298 K / 150 mL
T₂ = 104300 mL.K / 150 mL
T₂ = 695.33 K
Use the periodic table to write the electron configuration of gallium (Ga).
Drag the labels to the correct locations on the image. Each label can be used more than once.
Answer:
Explanation: It’s the correct answer on Edmentum.
A solid is held in shape by strong forces.
Ok thanks for the valuble info.
The diagram below shows what happens to an atom of uranium-235 when bombarded by a neutron. Which isotope is represented by X in the diagram?
Answer:
X represents barium - 141 nucleus.
Written as: (141, 56) Ba
Explanation:
In nuclear fission reaction, due to the fact that the process produces more neutrons, a nuclear chain reaction can possibly occurr. Now, a chain reaction is a one whereby the material that begins the reaction will also be one of the products and it can start another reaction.
Now, for the nuclear chain reaction for the fission of uranium-235, its nucleus absorbs a neutron after which it splits into a krypton - 92 nucleus and a barium - 141 nucleus. Thereafter it releases three more neutrons.
Thus, X is the image represents barium - 141 nucleus.
(141,56) Ba
Which of these statements about reaction rates is accurate?
All chemical reactions occur at a fast rate.
All chemical reactions occur at different rates.
All chemical reactions occur at a slow rate.
All chemical reactions occur at the same rate.
Answer:
All chemical reactions occur at different rates
Which family of elements has six electrons in d-type orbitals?
Answer: Selenium is a member of the sulfur family with elements including tellurium and polonium. This family has six electrons in the outermost shell. Selenium specifically has an electron configuration of 2-8-18-6. The six electrons in the outermost shell allow selenium to have a variety of valence numbers.
Explanation:
What is a rule for determining the mass number of an atom or ion?
Answer:
The mass number of the atom is equal to the sum of the number of protons and neutrons in the nucleus
Explanation:
Each proton and each neutron weigh one amu( atomic mass unit), adding together the neutrons and protons and multiplying by 1 amu you get the mass of an atom
What number do you never write as a coefficient?
Answer:
When no coefficient is written in front of a formula it is assumed to be 1. 4. Numbers appearing in the formulas are known as subscripts. These can never be changed when balancing the equation or you will change the identity of the substance.
Explanation:
1. Reactants go on the left hand side and products go on the right hand side of a chemical equation. Be sure to write the correct formulas for the reactants and products.
· Remember atoms are conserved in a chemical reaction. ie they are neither created or destroyed. So all the atoms in the reactants must end up somewhere among the products.
2. Count the number of atoms of each element, compound or ion in the reactants and products. If they are not equal proceed further.
3. Balance the atoms one at a time by placing coefficients in front of the formula so that the numbers of atoms of each element are equal on both sides of the equation. Remember atoms may exist in an element, compound or ion.
· It is usually easier to start with the atoms that occur in only one substance on each side of the equation.
· Balance the atoms that occur in compounds before attempting to balance atoms that occur in elemental form. e.g. H2, O2 or Cl2
· To make it easier if a polyatomic ion appears unchanged on both sides of the equation treat it as a whole unit.
· When no coefficient is written in front of a formula it is assumed to be 1.
4. Numbers appearing in the formulas are known as subscripts. These can never be changed when balancing the equation or you will change the identity of the substance.
· Remember with subscripts, any number to the right of parentheses multiplies each subscript within the parentheses.
eg Fe2(SO4)3 contains 2 Fe atoms, 3 S atoms and 12 O atoms.
5. Finally make sure that all the coefficients are in the smallest possible whole number ratio.
The number which we will never use as a coefficient in any chemical reactions are decimals and fractions.
What are coefficients?Coefficients are the numbers which are written before any chemical entity of any chemical reaction.
Coefficients of any reaction will not be:
Coefficient should always be a whole number.Decimal numbers or fractional numbers are not used as a coefficient.Coefficients are generally use for balancing the chemical reactions.
So, we will not use decimals and fractions as a coefficient.
To know more about coefficient, visit the below link:
https://brainly.com/question/2735017
Using dimensional analysis, how many kilometers are there in 34 inches?
Answer:
There are many ways to figuring this out: you could use a ruler, a calculator or scrap paper.
Explanation:
This is not an actual flat out answer, but it’s helpful methods to getting the answer the next time you are stuck. Hope you are having a nice day. Bless your heart and soul.
What is the formula for mass number?
Answer:
the formula for mass number is "mass number = protons + neutrons".
please answer this if you do I will answer your questions!!
Answer:
i think the forces are the same and size and in opposite directions
Explanation:
Answer:
I think it should be
The forces are the same size and in opposite directions
Explanation:
because newtons third law is applied equal force but opposite
GIVING BRAINLY, FOLLOW, 5 STARS AND HEARTS
which of the following is NOT a characteristic of hot water heating systems?
Answer:
The one on the top,'' As the water cool, it is returned to the boiler where it is heated,''
Explanation:
Sorry, I have another question! Please answer as soon as possible:)
Answer:
I think its b
Explanation:
Sorry if wrong! Hope this helps tho! maybe mark me brainliest if I am?
If 0.484J of heat is added to 0.1372g of water, how much will the temperature increase?
0.263 °C
0.927 °c
0.843 °C
0.460 °C
Answer:
ΔT = 0.843 °C
Explanation:
Given data:
Heat added = 0.484 J
Mass of water = 0.1372 g
Temperature increase = ΔT = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
Specific heat capacity of water is 4.184 j/g.°C
Now we will put the values in formula.
0.484 j = 0.1372 g × 4.184 j/g.°C× ΔT
0.484 j = 0.574j/°C× ΔT
ΔT = 0.484 j / 0.574j/°C
ΔT = 0.843 °C
Calculate the average atomic mass of element Q, if the isotopic composition of element Q is as follows: Q-107 has an abundance of 78%, and Q-110 has an abundance of 22%. Type your answer rounded to two decimal places.
Answer:
5
Explanation:
1 You place a 28.95-g piece of gold in a 10-ml graduated cylinder. The level of the water rises 1.50 mL. What is the density of gold?
Answer:
What mass of silver will raise the level of the water in the graduated cylinder 1.50 mL? (Ans) 28.95 g / 1.50 mL = 19.3 g/mL (The gold's density)
19.3 gm/ml³ is the density of gold .
What do you mean by the density of the substance?Density, mass of a unit volume of a material substance. Density of a substance tells how close the particles of a substance are packed.
The formula for density is D = M/V, where d is density, M is mass, and V is volume.
Density is commonly expressed in units of grams per cubic centimeter.
The SI unit of density is kilogram per cubic meter (kg/m3).
It is also represented in the c g s unit of grams per cubic centimeter (g/cm3).
To calculate density of gold (here):
Given,
Mass of gold=28.95 gm
Volume of water=1.50 mL
Density=?
Density =Mass/Volume
Density=28.95/1.50
Density=19.3 gm/ml³
Hence, 19.3 gm/ml³ is the density of gold .
Learn more about density ,here:
https://brainly.com/question/15164682
#SPJ5
To pass a test with 15 questions how many can I get wrong?
Answer:
You can get 7 answers wrong.
Explanation:
Let's calculate the average
[tex]\frac{15}{2} \\\\=7.5[/tex]
So if you correctly answer 8 -15 (7.5 is approximated to 8 )questions correctly you will pass.
So you can get 7 answers wrong.
WILL GIVE POINTS AND BRAINLIEST
Question:
Number of H− ions in 5.22 g of SrH2
Answer:
moles H = 2 x 0.0649=0.130
ions = 0.130 x 6.02 x 10^23=7.81 x 10^22
Explanation:
HELP!
A. W
B. X
C. Y
D. Z
Answer:
B
Explanation:
Which molecule contains a triple bond?
A.N₂
B.F₂
C.O₂
D.I₂
Answer:
N2.
Explanation:
Which is a Chemical Property of copper? reacts in air to form a green layer is a lustrous brown color is a solid at room temperature has a boiling point of 2567 degrees
Answer:
reacts in air to form a green layer
Explanation:
Properties of substances can be physical or chemical. A physical property is that which does not affect the chemical composition of the substance(s) involved e.g melting point, boiling point, color, state of matter as depicted for copper (Cu) in this question.
On the other hand, chemical property of a substance are those properties that alters or affects the chemical composition of the substance. In other words, they are features that can be observed after the substance has undergone a chemical reaction. In this question, COPPER REACTING IN AIR TO FORM A GREEN LAYER IS A TYPE OF CHEMICAL PROPERTY because a chemical reaction has occured with the evidence of the green layer formation.
The tendency of an atom to attract electrons to itself is ionization energy. effective nuclear charge. electron affinity. electronegativity.
Answer:
electronegativity
Explanation:
Answer:
THe tendoncy is electronegstivity
Explanation:
Im a big brain person
define open and closed circuit
Answer:
An open circuit is one where the continuity has been broken by an interruption in the path for current to flow. A closed circuit is one that is complete, with good continuity throughout. A device designed to open or close a circuit under controlled conditions is called a switch.